diff options
| -rw-r--r-- | system/openct/README | 37 | ||||
| -rw-r--r-- | system/openct/README.SBo | 18 | ||||
| -rw-r--r-- | system/openct/doinst.sh | 1 | ||||
| -rw-r--r-- | system/openct/openct.SlackBuild | 69 | ||||
| -rw-r--r-- | system/openct/openct.info | 8 | ||||
| -rw-r--r-- | system/openct/slack-desc | 8 |
6 files changed, 60 insertions, 81 deletions
diff --git a/system/openct/README b/system/openct/README index fc4f066f7f..3096d8d03f 100644 --- a/system/openct/README +++ b/system/openct/README @@ -4,35 +4,12 @@ a small and lean middleware, so applications can use it with minimal overhead. OpenCT also has a primitive mechanism to export smart card readers to remote machines via TCP/IP. -This requires pcsc-lite (available on SlackBuilds.org). +This requires pcsc-lite. -For serial and pcmcia readers only, for using it as a PC/SC ifdhandler, -you have to edit file reader-openct.conf in /etc/reader.conf.d/, to -comment lines in other file(s) and run "/usr/sbin/update-reader.conf". - -Compiling with "APIDOC=1 ./openct.SlackBuild" produces API .pdf -documentation (mainly intended for developers). - -Compiling with "HALD=1 ./openct.SlackBuild" enable smart-card reader -detection using hal daemon's .fdi files. By default openct uses udev rules -instead to detect it. Hal and udev are alternative. - -Compiling with "NONPRIV=1 ./openct.SlackBuild" enable non-privileged -mode, but you may need to modify /etc/rc.d/rc.openctd to allow 'chown' -to change user/group. - -To start OpenCT daemon, run "/etc/rc.d/rc.openctd start". This is -most easily accomplished by adding the following to /etc/rc.d/rc.local: - if [ -x /etc/rc.d/rc.openctd ]; then - /etc/rc.d/rc.openctd start - fi - -Beware! -- OpenCT daemon is meant as _alternative_ to pcsc-lite: running rc.openctd -and rc.pcscd at the same time can and will lead to unforseeable problems -(specially with usb devices that can be managed by both of them, one daemon -can claim one device, making it unavailable for other daemon). -- for some unknown reasons, if you start rc.openctd and then stop it, -you may need unplug and plug-in your usb smartcard reader in order -to it to be seen again, so udev rule is re-applied. +Smart-card reader detection using hal daemon is now deprecated. We use +udev rules only. +Compiling with "NONPRIV=1 ./openct.SlackBuild" enables +non-privileged mode, but you may need to modify /etc/rc.d/rc.openctd +to allow 'chown' to change user/group. +See README.SBo for further information. diff --git a/system/openct/README.SBo b/system/openct/README.SBo new file mode 100644 index 0000000000..c15b64f274 --- /dev/null +++ b/system/openct/README.SBo @@ -0,0 +1,18 @@ +To start OpenCT daemon, run "/etc/rc.d/rc.openctd start". This is +most easily accomplished by adding the following to /etc/rc.d/rc.local: + if [ -x /etc/rc.d/rc.openctd ]; then + /etc/rc.d/rc.openctd start + fi + +For serial and pcmcia readers only, for using it as a PC/SC ifdhandler, +you have to edit file reader-openct.conf in /etc/reader.conf.d/, to +comment lines in other file(s) and run "/usr/sbin/update-reader.conf". + +Beware! +- OpenCT daemon is meant as _alternative_ to pcsc-lite: running rc.openctd +and rc.pcscd at the same time can and will lead to unforseeable problems +(specially with usb devices that can be managed by both of them, one daemon +can claim one device, making it unavailable for other daemon). +- for some unknown reasons, if you start rc.openctd and then stop it, +you may need unplug and plug-in your usb smartcard reader in order +to it to be seen again, so udev rule is re-applied. diff --git a/system/openct/doinst.sh b/system/openct/doinst.sh index 359dfdfc76..bb02ff148c 100644 --- a/system/openct/doinst.sh +++ b/system/openct/doinst.sh @@ -21,3 +21,4 @@ fi config etc/rc.d/rc.openctd.new config etc/openct.conf.new config etc/reader.conf.d/reader-openct.conf.new + diff --git a/system/openct/openct.SlackBuild b/system/openct/openct.SlackBuild index b408369105..3924ed707f 100644 --- a/system/openct/openct.SlackBuild +++ b/system/openct/openct.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for openct -# Copyright 2008-2009 LukenShiro <lukenshiro@ngi.it> +# Copyright 2008-2010 LukenShiro <lukenshiro@ngi.it> # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,7 +23,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PRGNAM=openct -VERSION=${VERSION:-0.6.16} +VERSION=${VERSION:-0.6.19} ARCH=${ARCH:-i486} BUILD=${BUILD:-1} TAG=${TAG:-_SBo} @@ -35,7 +35,7 @@ OUTPUT=${OUTPUT:-/tmp} APIDOC=${APIDOC:-0} # api documentation not built by default NONPRIV=${NONPRIV:-0} # disable not-privileged mode (it will be used by root) -HALD=${HALD:-0} # hal detection is disabled by default, we use udev instead + DOCFILES="NEWS TODO LGPL-2.1" if [ "$ARCH" = "i486" ]; then @@ -81,13 +81,6 @@ case "$NONPRIV" in ;; esac -case "$HALD" in - 0) UDEV_FLAGS="--with-udev=/lib${LIBDIRSUFFIX}/udev" - ;; - *) UDEV_FLAGS="" # do nothing - ;; -esac - CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ @@ -105,10 +98,10 @@ CXXFLAGS="$SLKCFLAGS" \ --${APIDOC_FLAG}able-api-doc \ --with-ifddir=/usr/lib${LIBDIRSUFFIX}/ifd \ --disable-static \ - --build=$ARCH-slackware-linux \ + --with-udev=/lib/udev \ --with-daemon-user=root \ $NONPRIV_FLAGS \ - $UDEV_FLAGS + --build=$ARCH-slackware-linux make make install DESTDIR=$PKG @@ -139,35 +132,21 @@ sed -i "s|^DEVICENAME|#DEVICENAME|g" $PKG/etc/reader.conf.d/reader-openct.conf.n sed -i "s|^LIBPATH|#LIBPATH|g" $PKG/etc/reader.conf.d/reader-openct.conf.new sed -i "s|^CHANNELID|#CHANNELID|g" $PKG/etc/reader.conf.d/reader-openct.conf.new -# Hal and udev detection are alternative, and their rules should not be -# installed at the same time, according to upstream. -case "$HALD" in - 0) # Install udev scripts for openct - mkdir -p $PKG/lib${LIBDIRSUFFIX}/udev - install -m755 etc/openct_usb $PKG/lib${LIBDIRSUFFIX}/udev/openct_usb - install -m755 etc/openct_pcmcia $PKG/lib${LIBDIRSUFFIX}/udev/openct_pcmcia - install -m755 etc/openct_serial $PKG/lib${LIBDIRSUFFIX}/udev/openct_serial - - # Install udev rules for openct - mkdir -p $PKG/lib${LIBDIRSUFFIX}/udev/rules.d - cp -a etc/openct.udev $PKG/lib${LIBDIRSUFFIX}/udev/rules.d/95-openct.rules - # Update attributes according to recent udev rules' naming convention - sed -i "s|SYSFS{|ATTR{|g" $PKG/lib${LIBDIRSUFFIX}/udev/rules.d/95-openct.rules - # WAIT_FOR_SYSFS is replaced by WAIT_FOR in udev>=123: - sed -i "s|WAIT_FOR_SYSFS=|WAIT_FOR=|g" $PKG/lib${LIBDIRSUFFIX}/udev/rules.d/95-openct.rules - # modification taken to prevent bug (as happened in other distributions: - # i.e. https://bugzilla.redhat.com/287871): - # it seems 'sleep' program would otherwise be applied to every usb add - # event, not only to this one - sed -i "s|^PROGRAM=|#PROGRAM=|g" $PKG/lib${LIBDIRSUFFIX}/udev/rules.d/95-openct.rules - ;; - *) # Install openct rules/script for hal - mkdir -p $PKG/usr/share/hal/fdi/information/10freedesktop/ - cp -a etc/openct.fdi $PKG/usr/share/hal/fdi/information/10freedesktop/10-usb-openct.fdi - mkdir -p $PKG/usr/libexec - install -m755 etc/openct.hald $PKG/usr/libexec/hald-addon-openct - ;; -esac +# Hal detection is now deprecated by upstream, so we use udev detection. +# Install udev scripts for openct +mkdir -p $PKG/lib/udev +install -m755 etc/openct_usb $PKG/lib/udev/openct_usb +install -m755 etc/openct_pcmcia $PKG/lib/udev/openct_pcmcia +install -m755 etc/openct_serial $PKG/lib/udev/openct_serial + +# Install udev rules for openct +mkdir -p $PKG/lib/udev/rules.d +cp -a etc/openct.udev $PKG/lib/udev/rules.d/95-openct.rules +# modification taken to prevent bug (as happened in other distributions: +# i.e. https://bugzilla.redhat.com/287871): +# it seems 'sleep' program would otherwise be applied to every usb add +# event, not only to this one +sed -i "s|^PROGRAM=|#PROGRAM=|g" $PKG/lib/udev/rules.d/95-openct.rules # Directory for status, socket and lock files mkdir -p $PKG/var/run/openct @@ -183,8 +162,10 @@ chown $USR_GRP $PKG/var/run/openct mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/ifd ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null || true + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) ( cd $PKG/usr/man @@ -203,4 +184,4 @@ cat $CWD/slack-desc > $PKG/install/slack-desc cat $CWD/doinst.sh > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/system/openct/openct.info b/system/openct/openct.info index 8dc3749ed2..81ee2f311d 100644 --- a/system/openct/openct.info +++ b/system/openct/openct.info @@ -1,8 +1,10 @@ PRGNAM="openct" -VERSION="0.6.16" +VERSION="0.6.19" HOMEPAGE="http://www.opensc-project.org/openct/" -DOWNLOAD="http://www.opensc-project.org/files/openct/openct-0.6.16.tar.gz" -MD5SUM="d8d8c63269985303a303a218c4b953d7" +DOWNLOAD="http://www.opensc-project.org/files/openct/openct-0.6.19.tar.gz" +MD5SUM="273f6dfd1c5f32990e23e8a0f3ca261c" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" MAINTAINER="LukenShiro" EMAIL="lukenshiro@ngi.it" APPROVED="dsomero" diff --git a/system/openct/slack-desc b/system/openct/slack-desc index 772bb515a8..d15bd8bfb1 100644 --- a/system/openct/slack-desc +++ b/system/openct/slack-desc @@ -7,13 +7,13 @@ |-----handy-ruler---------------------------------------------------| openct: openct (Middleware framework for smart card terminals) -openct: +openct: openct: It implements drivers for several smart card readers. It comes as openct: driver in ifdhandler format for PC/SC-Lite, as CT-API driver, or openct: as a small and lean middleware, so applications can use it with openct: minimal overhead. OpenCT also has a primitive mechanism to export openct: smart card readers to remote machines via TCP/IP. -openct: +openct: openct: Homepage: http://www.opensc-project.org/openct/ -openct: -openct: +openct: +openct: |