network/postfix-pgsql: Added (postfix with support for PostgreSQL)

Signed-off-by: Dave Woodfall <dave@slackbuilds.org>

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

5 files changed, 168 insertions, 0 deletions

diff --git a/network/postfix-pgsql/README b/network/postfix-pgsql/README
new file mode 100644
index 0000000000..59211a1702
--- /dev/null
+++ b/network/postfix-pgsql/README
@@ -0,0 +1,7 @@
+Postfix is Wietse Venema's mailer that started life as an alternative to
+the widely-used Sendmail program. It attempts to be fast, easy to
+administer, and secure, while at the same time, being sendmail
+compatible enough to not upset existing users. Thus, the outside has a
+sendmail-ish flavor, but the inside is completely different.
+
+This script adds PostgreSQL support to postfix.
diff --git a/network/postfix-pgsql/doinst.sh b/network/postfix-pgsql/doinst.sh
new file mode 100644
index 0000000000..91aaad7e22
--- /dev/null
+++ b/network/postfix-pgsql/doinst.sh
@@ -0,0 +1,14 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/postfix/dynamicmaps.cf.d/pgsql.cf.new
diff --git a/network/postfix-pgsql/postfix-pgsql.SlackBuild b/network/postfix-pgsql/postfix-pgsql.SlackBuild
new file mode 100644
index 0000000000..862b6dc4d6
--- /dev/null
+++ b/network/postfix-pgsql/postfix-pgsql.SlackBuild
@@ -0,0 +1,118 @@
+#!/bin/bash
+#
+# Copyright 2006, 2011  Alan Hicks, Lizella, GA
+# Copyright 2010, 2011, 2013, 2014, 2015, 2016, 2017  Mario Preksavec, Zagreb, Croatia
+# Copyright 2017, 2018  Patrick J. Volkerding, Sebeka, MN USA
+# Copyright 2020, 2021, 2022  Eugen Wissner, Dachau, Germany
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=postfix-pgsql
+VERSION=${VERSION:-3.6.4}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+PKGTYPE=${PKGTYPE:-tgz}
+SRCNAM=postfix
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e # Exit on most errors
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
+
+PGSQLARGS="-I/usr/include/postgresql -DHAS_PGSQL"
+
+### CHANGING BUILT-IN DOCUMENTATION PATH SETTINGS
+#
+# If we try to use postfix-$VERSION in any of these paths, we'll get a compile
+# failure: "error: too many decimal points in number"
+# So we're pretty much forced to leave things as postfix expects them.
+PATHARGS="'-DDEF_HTML_DIR=\"/usr/doc/postfix/html\"' \
+  '-DDEF_MANPAGE_DIR=\"/usr/man\"' \
+  '-DDEF_README_DIR=\"/usr/doc/postfix/readme\"'"
+
+make makefiles dynamicmaps=yes pie=yes shared=yes \
+  shlib_directory=/usr/lib${LIBDIRSUFFIX}/postfix/MAIL_VERSION \
+  CCARGS="$PGSQLARGS $PATHARGS" \
+  AUXLIBS_PGSQL="-lpq -lz -lm" \
+  OPT="$SLKCFLAGS" DEBUG=""
+make
+
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/postfix/$VERSION
+cp -a lib/postfix-pgsql.so $PKG/usr/lib${LIBDIRSUFFIX}/postfix/$VERSION/
+
+strip --strip-unneeded $PKG/usr/lib${LIBDIRSUFFIX}/postfix/$VERSION/postfix-pgsql.so
+
+mkdir -p $PKG/etc/postfix/dynamicmaps.cf.d
+echo "pgsql	postfix-pgsql.so	dict_pgsql_open" > $PKG/etc/postfix/dynamicmaps.cf.d/pgsql.cf.new
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE
diff --git a/network/postfix-pgsql/postfix-pgsql.info b/network/postfix-pgsql/postfix-pgsql.info
new file mode 100644
index 0000000000..f961be8e24
--- /dev/null
+++ b/network/postfix-pgsql/postfix-pgsql.info
@@ -0,0 +1,10 @@
+PRGNAM="postfix-pgsql"
+VERSION="3.6.4"
+HOMEPAGE="https://www.postfix.org/"
+DOWNLOAD="http://cdn.postfix.johnriley.me/mirrors/postfix-release/official/postfix-3.6.4.tar.gz"
+MD5SUM="fcc071c864d3b152a14b30b399ffda7f"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="postgresql"
+MAINTAINER="Eugene Wissner"
+EMAIL="belka@caraus.de"
diff --git a/network/postfix-pgsql/slack-desc b/network/postfix-pgsql/slack-desc
new file mode 100644
index 0000000000..47ad32def0
--- /dev/null
+++ b/network/postfix-pgsql/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+             |-----handy-ruler------------------------------------------------------|
+postfix-pgsql: postfix-pgsql (postfix with support for PostgreSQL)
+postfix-pgsql:
+postfix-pgsql: Postfix attempts to be fast, easy to administer, and secure, while at
+postfix-pgsql: the same time being sendmail compatible enough to not upset existing
+postfix-pgsql: users. Thus, the outside has a sendmail-ish flavor, but the inside is
+postfix-pgsql: completely different.
+postfix-pgsql:
+postfix-pgsql: This script adds PostgreSQL support to postfix.
+postfix-pgsql:
+postfix-pgsql: Homepage: http://www.postfix.org
+postfix-pgsql: