diff options
Diffstat (limited to 'source/a/mt-st/mt-st.config.diff')
| -rw-r--r-- | source/a/mt-st/mt-st.config.diff | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/source/a/mt-st/mt-st.config.diff b/source/a/mt-st/mt-st.config.diff new file mode 100644 index 00000000..756261b1 --- /dev/null +++ b/source/a/mt-st/mt-st.config.diff @@ -0,0 +1,172 @@ +--- mt-st-0.8/stinit.def.examples.configfiles 2002-09-23 19:02:21.000000000 +0200 ++++ mt-st-0.8/stinit.def.examples 2005-04-07 08:21:01.732633520 +0200 +@@ -56,3 +56,169 @@ + mode3 blocksize=0 density=1 # 800 bpi + } + ++# DLT2000 / 2000XT ++manufacturer="QUANTUM" model = "DLT2000" { ++scsi2logical=1 ++can-bsr ++auto-lock=0 ++two-fms=0 ++drive-buffering=1 ++buffer-writes ++read-ahead=1 ++async-writes=1 ++can-partitions=0 ++fast-mteom=1 ++# ++# If your stinit supports the timeouts: ++timeout=3600 # 1 hour ++long-timeout=14400 # 4 hours ++# ++mode1 blocksize=0 density=0x81 # 10GB + compression on DLTtape III, 15+ with DLTtape IIIXT in 2000XT ++mode2 blocksize=0 density=0x80 # 10GB, no compression on DLTtape III, 15 with DLTtape IIIXT in 2000XT ++mode3 blocksize=0 density=0x18 # 6GB, compression not available, on DLTtape III ++mode4 blocksize=0 density=0x17 #2.6GB, compression not available, on DLTtape III ++} ++ ++# DLT4000 ++manufacturer="QUANTUM" model = "DLT4000" { ++scsi2logical=1 ++can-bsr ++auto-lock=0 ++two-fms=0 ++drive-buffering=1 ++buffer-writes ++read-ahead=1 ++async-writes=1 ++can-partitions=0 ++fast-mteom=1 ++# ++# If your stinit supports the timeouts: ++timeout=3600 # 1 hour ++long-timeout=14400 # 4 hours ++# ++# Drive is backwards compatible, use older modes (e.g. from above) as required ++mode1 blocksize=0 density=0x83 # 20GB + compression ++mode2 blocksize=0 density=0x82 # 20GB, no compression ++mode3 blocksize=0 density=0x81 # 10GB + compression (DLT2000 mode) with DLTtape III, 15+ with DLTtape IIIXT in 2000XT ++mode4 blocksize=0 density=0x80 # 10GB, no compression (DLT2000 mode) with DLTtape III, 15 with DLTtape IIIXT in 2000XT ++} ++ ++# DLT7000 ++manufacturer="QUANTUM" model = "DLT7000" { ++scsi2logical=1 ++can-bsr ++auto-lock=0 ++two-fms=0 ++drive-buffering=1 ++buffer-writes ++read-ahead=1 ++async-writes=1 ++can-partitions=0 ++fast-mteom=1 ++# ++# If your stinit supports the timeouts: ++timeout=3600 # 1 hour ++long-timeout=14400 # 4 hours ++# ++# Drive is backwards compatible, use older modes (e.g. from above) as required. ++mode1 blocksize=0 density=0x85 # 35GB + compression ++mode2 blocksize=0 density=0x84 # 35GB, no compression ++mode3 blocksize=0 density=0x83 # 20GB + compression (DLT4000 mode) ++mode4 blocksize=0 density=0x82 # 20GB, no compression (DLT4000 mode) ++} ++ ++# DLT8000 ++manufacturer="QUANTUM" model = "DLT8000" { ++scsi2logical=1 ++can-bsr=1 ++auto-lock=0 ++two-fms=0 ++drive-buffering=1 ++buffer-writes ++read-ahead=1 ++async-writes=1 ++can-partitions=0 ++fast-mteom=1 ++# ++# If your stinit supports the timeouts: ++timeout=3600 # 1 hour ++long-timeout=14400 # 4 hours ++# ++# Drive is backwards compatible to DLT7000, use older modes (e.g. from above) as required. Modes <10GB (<0x19) not supported! ++mode1 blocksize=0 density=0x89 # 40GB + compression ++mode2 blocksize=0 density=0x88 # 40GB, no compression ++mode3 blocksize=0 density=0x85 # 35GB + compression (DLT7000 mode) ++mode4 blocksize=0 density=0x84 # 35GB, no compression (DLT7000 mode) ++} ++ ++ ++# SDLT220 ++manufacturer="QUANTUM" model = "SuperDLT1" { ++scsi2logical=1 ++can-bsr=1 ++auto-lock=0 ++two-fms=0 ++drive-buffering=1 ++buffer-writes ++read-ahead=1 ++async-writes=1 ++can-partitions=0 ++fast-mteom=1 ++# ++# If your stinit supports the timeouts: ++timeout=3600 # 1 hour ++long-timeout=14400 # 4 hours ++# ++# Drive is backwards read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so no need to define any other modes here. ++mode1 blocksize=0 density=0x48 compression=1 # 110 GB + compression ++mode2 blocksize=0 density=0x48 compression=0 # 110 GB, no ompression ++} ++ ++# SDLT320 ++manufacturer="QUANTUM" model = "SDLT320" { ++scsi2logical=1 ++can-bsr=1 ++auto-lock=0 ++two-fms=0 ++drive-buffering=1 ++buffer-writes ++read-ahead=1 ++async-writes=1 ++can-partitions=0 ++fast-mteom=1 ++# ++# If your stinit supports the timeouts: ++timeout=3600 # 1 hour ++long-timeout=14400 # 4 hours ++# ++# Drive is backwards write compatible to SDLT220 and read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so we need only the SDL220/320 modes here ++mode1 blocksize=0 density=0x49 compression=1 # 160 GB + compression ++mode2 blocksize=0 density=0x49 compression=0 # 160 GB, no ompression ++mode3 blocksize=0 density=0x48 compression=1 # 110 GB + compression ++mode4 blocksize=0 density=0x48 compression=0 # 110 GB, no ompression ++} ++ ++# SDLT600 ++manufacturer="QUANTUM" model = "SDLT600" { ++scsi2logical=1 ++can-bsr=1 ++auto-lock=0 ++two-fms=0 ++drive-buffering=1 ++buffer-writes ++read-ahead=1 ++async-writes=1 ++can-partitions=0 ++fast-mteom=1 ++# ++# If your stinit supports the timeouts: ++timeout=3600 # 1 hour ++long-timeout=14400 # 4 hours ++# ++# Drive is backwards read compatible to SDLT220/320 and VS160. Mode settings are only required for writing, so we need only the native SDLT600 mode here. ++mode1 blocksize=0 density=0x4a compression=1 # 300 GB + compression ++mode2 blocksize=0 density=0x4a compression=0 # 300 GB, no ompression ++mode3 blocksize=0 density=0x4a compression=1 # 300 GB + compression ++mode4 blocksize=0 density=0x4a compression=0 # 300 GB, no ompression ++} ++ |