diff options
Diffstat (limited to 'patches/source/samba/samba.SlackBuild')
| -rwxr-xr-x | patches/source/samba/samba.SlackBuild | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/patches/source/samba/samba.SlackBuild b/patches/source/samba/samba.SlackBuild new file mode 100755 index 00000000..de6bbf45 --- /dev/null +++ b/patches/source/samba/samba.SlackBuild @@ -0,0 +1,224 @@ +#!/bin/sh + +# Copyright 2008, 2009, 2010, 2012, 2013, 2015, 2016 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port. + + +VERSION=${VERSION:-$(echo samba-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-3_slack14.2} + +if [ -e $CWD/machine.conf ]; then + . $CWD/machine.conf ] +elif [ -e /etc/slackbuild/machine.conf ]; then + . /etc/slackbuild/machine.conf ] +else + # Automatically determine the architecture we're building on: + if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i586 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac + fi + # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX: + if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" + elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" + else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + fi +fi + +case "$ARCH" in + arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; + *) TARGET=$ARCH-slackware-linux ;; +esac + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-samba +rm -rf $PKG +mkdir -p $TMP $PKG + +if [ -r /usr/lib${LIBDIRSUFFIX}/libtalloc.so.? -a ! -r /var/log/packages/talloc* ]; then + echo "The Samba package needs to be removed before building to ensure that" + echo "talloc (and possibly other bundled libraries) are included in the build." + echo + echo "Removing the Samba package in 15 seconds, and then continuing with the build." + sleep 15 + removepkg samba +fi + +cd $TMP +rm -rf samba-$VERSION +tar xvf $CWD/samba-$VERSION.tar.xz || exit 1 +cd samba-$VERSION || exit 1 + +# Patch to install talloc/tevent/tdb libraries and includes: +zcat $CWD/samba.install.talloc.tevent.tdb.diff.gz | patch -p1 --verbose || exit 1 + +# Patch CVE-2017-14746 and CVE-2017-15275: +zcat $CWD/samba-4.5.14-security-2017-11-21.patch.gz | patch -p1 --verbose || exit 1 + +# Patch CVE-2018-1057: +zcat $CWD/samba-4.4.16-CVE-2018-1057.patch.gz | patch -p1 --verbose || exit 1 + +if [ ! -d source3/lib/cmdline ]; then + ( cd source3/lib + mkdir cmdline + cd cmdline + ln -sf ../../../source3/include/popt_common.h . ) +fi + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Some of these options could be auto-detected, but declaring them +# here doesn't hurt and helps document what features we're trying to +# build in. +# +# LDFLAGS are needed to avoid problems with missing symbols. +LDFLAGS="-Wl,--no-as-needed" \ +CFLAGS="$SLKCFLAGS" \ +./configure \ + --enable-fhs \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --includedir=/usr/include \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --mandir=/usr/man \ + --sysconfdir=/etc \ + --with-configdir=/etc/samba \ + --with-piddir=/var/run \ + --with-privatedir=/var/lib/samba/private \ + --with-privatelibdir=/usr/lib${LIBDIRSUFFIX} \ + --with-modulesdir=/usr/lib${LIBDIRSUFFIX} \ + --with-lockdir=/var/cache/samba \ + --with-logfilebase=/var/log/samba \ + --localstatedir=/var \ + --enable-cups \ + --with-acl-support \ + --with-automount \ + --with-quotas \ + --with-syslog \ + --with-utmp \ + --with-winbind \ + --with-ldap \ + --with-ads \ + --without-pam \ + --build=$TARGET + # Gives errors: + #--builtin-libraries=replace,ccan \ + #--bundled-libraries=heimdal \ + +# -j options don't seem to work... [Yes they do! At least try to use -j below...] +JOBS=6 +MAXJOBS=6 +export JOBS MAXJOBS +make -j $MAXJOBS || make || exit 1 + +mkdir -p \ + $PKG/usr/doc/samba-$VERSION \ + $PKG/var/spool/samba \ + $PKG/var/log/samba \ + $PKG/var/lib/samba/private \ + $PKG/var/cache/samba +chmod 700 $PKG/var/lib/samba/private +chmod 1777 $PKG/var/spool/samba + +make install DESTDIR=$PKG || exit 1 + +# Install the smbprint script: +install -m0744 packaging/printing/smbprint $PKG/usr/bin/smbprint + +# Add a sample config file: +cat $CWD/smb.conf.default > $PKG/etc/samba/smb.conf-sample + +# Setup a default lmhosts file: +echo "127.0.0.1 localhost" > $PKG/etc/samba/lmhosts.new + +if [ ! -r $PKG/usr/bin/smbget ]; then + rm -f $PKG/usr/share/man/man1/smbget.1 +fi + +# We'll add rc.samba to the init directory, but chmod 644 so that it doesn't +# start by default: +mkdir -p $PKG/etc/rc.d +cat $CWD/rc.samba > $PKG/etc/rc.d/rc.samba.new +chmod 644 $PKG/etc/rc.d/rc.samba.new + +mv $PKG/usr/share/man $PKG/usr +gzip -9 $PKG/usr/man/man?/*.? + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# PAM related stuff we don't use: +rm -r $PKG/usr/share/locale +rm -f $PKG/usr/man/man8/pam* + +cp -a \ + COPYING* MAINTAINERS Manifest PFIF.txt README* \ + Read-Manifest-Now Roadmap WHATSNEW.txt docs examples \ + $PKG/usr/doc/samba-$VERSION +# These are installed elsewhere: +rm -rf $PKG/usr/doc/samba-$VERSION/docs/htmldocs \ + $PKG/usr/doc/samba-$VERSION/docs/manpages +# Empty now? +rmdir $PKG/usr/doc/samba-$VERSION/docs 2> /dev/null +# I'm sorry, but when all this info is included in HTML, adding 7MB worth of +# PDF files just to have extra artwork is more fluff than I'll agree to. +rm -f $PKG/usr/doc/samba-$VERSION/docs/*.pdf +# Also redundant also: +rm -rf $PKG/usr/doc/samba-$VERSION/docs/docbook + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cat << EOF + +*** Be sure the package contains: + +drwxr-xr-x 2 root root 4096 May 3 15:46 /var/cache/samba/ +drwx------ 2 root root 1024 Mar 12 13:21 /var/lib/samba/private +drwxr-xr-x 2 root root 48 Aug 29 13:06 /var/log/samba/ +drwxrwxrwt 2 root root 1024 Mar 12 13:21 /var/spool/samba/ + +EOF + +cd $PKG +/sbin/makepkg -l y -c n $TMP/samba-$VERSION-$ARCH-$BUILD.txz + |