summaryrefslogtreecommitdiff
path: root/patches/source/mkinitrd/mkinitrd_command_generator.sh
diff options
context:
space:
mode:
Diffstat (limited to 'patches/source/mkinitrd/mkinitrd_command_generator.sh')
-rw-r--r--patches/source/mkinitrd/mkinitrd_command_generator.sh872
1 files changed, 872 insertions, 0 deletions
diff --git a/patches/source/mkinitrd/mkinitrd_command_generator.sh b/patches/source/mkinitrd/mkinitrd_command_generator.sh
new file mode 100644
index 00000000..33d9c9de
--- /dev/null
+++ b/patches/source/mkinitrd/mkinitrd_command_generator.sh
@@ -0,0 +1,872 @@
+#!/bin/sh
+# $Id: mkinitrd_command_generator.sh,v 1.45 2011/02/17 09:27:05 eha Exp eha $
+# Copyright 2013 Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011 Eric Hameleers, Eindhoven, Netherlands
+# Contact: <alien@slackware.com>
+# Copyright 2008, 2009 PiterPUNK, Sao Paulo, SP, Brazil
+# Contact: <piterpunk@slackware.com>
+# All rights reserved.
+#
+# Permission to use, copy, modify, and distribute this software for
+# any purpose with or without fee is hereby granted, provided that
+# the above copyright notice and this permission notice appear in all
+# copies.
+#
+# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+#
+# Create an initrd which fits the system.
+# Take into account the use of LVM/LUKS/RAID.
+# Find out about any hardware drivers the system may need in an initrd when
+# booting from a generic lightweight kernel.
+#
+# -----------------------------------------------------------------------------
+
+# The script's revision number will be displayed in the help text:
+REV=$( echo "$Revision: 1.45 $" | cut -d' ' -f2 )
+
+# Define some essential parameter values:
+USING_LVM=""
+USING_LUKS=""
+USING_RAID=""
+MLIST=""
+REALDEV="" # The device that contains the LUKS volume
+BASEDEV="" # Lowest level device (raw block device or RAID volume)
+
+FSTAB=${FSTAB:-"/etc/fstab"} # so we can test with alternate fstab files
+
+# These are needed by -c and -i options:
+SOURCE_TREE=${SOURCE_TREE:-"/boot/initrd-tree"}
+CLEAR_TREE=${CLEAR_TREE:-1}
+KEYMAP=${KEYMAP:-"us"}
+UDEV=${UDEV:-1}
+# ARM devices need more time:
+case "$( uname -m )" in
+ arm*) WAIT_DEFAULT=4;;
+ *) WAIT_DEFAULT=1;;
+esac
+WAIT=${WAIT:-$WAIT_DEFAULT}
+
+# A basic explanation of the commandline parameters:
+basic_usage() {
+ cat <<-EOT
+
+ *** $(basename $0) revision $REV ***
+ Usage:
+ $(basename $0) [ options ] [ kernel_filename ]
+ Options:
+ -a <"additional params"> Additional parameters to pass to mkinitrd.
+ -c | --conf Show a suitable mkinitrd configuration file.
+ -h | --help Show this help.
+ -i | --interactive Navigate through menus instead of using
+ commandline arguments.
+ --longhelp Show more detailed information/examples.
+ -k <kernelversion> Use specific kernel version.
+ -m <"additional mods"> Additional modules to pass to mkinitrd,
+ separated by colons (:).
+ -l | --lilo Only show lilo.conf section
+ (requires a kernel_filename).
+ -r | --run Only show 'mkinitrd' command.
+ EOT
+}
+
+# More of a tutorial here:
+extended_usage() {
+ cat <<-EOT
+
+ This script is useful in situations where you require an initrd image
+ to boot your computer.
+ For instance, when booting a kernel that does not have support for your
+ storage or root filesystem built in (such as the Slackware 'generic'
+ kernels').
+
+ * When you run the script without parameters, it will examine your
+ running system, your current kernel version and will output an example
+ of a 'mkinitrd' commandline that you can use to generate an initrd
+ image containing enough driver support to boot the computer.
+
+ * You can make it more specific: when you add the filename of a kernel
+ as parameter to the script, it will determine the kernel version from
+ that kernel, and also give an example of the lines that you should add
+ to your '/etc/lilo.conf' file.
+
+ * If you want your initrd image to have a custom name instead of the
+ default '/boot/initrd.gz' you can add it as another parameter to the
+ script, as follows:
+
+ $(basename $0) -a "-o /boot/custom.gz"
+
+ The arguments to the '-a' parameter will be used as additional arguments
+ to the 'mkinitrd' command.
+
+ * If you need additional modules in the initrd image, apart from what
+ the script determines, you can pass then to the script using the '-m'
+ parameter as follows:
+
+ $(basename $0) -m "uhci-hcd:usbhid:hid_generic"
+
+ The above example adds support for USB keyboards to the initrd - you
+ may need that if you have encrypted your root partition and need to
+ enter a passphrase using a USB keyboard.
+
+ * Instead of copying and pasting the script's output, you can create
+ an initrd by directly executing the output, like in this example:
+
+ EOT
+
+ echo " \$($(basename $0) --run /boot/vmlinuz-generic-smp-2.6.35.11-smp)"
+
+ cat <<-EOT
+
+ That used the '-r' or '--run' switch to make the script only write
+ the 'mkinitrd' commandline to the terminal.
+
+ * When you want to add a section for a specific kernel to
+ '/etc/lilo.conf' directly, use the '-l' or '--lilo' switch and use a
+ command like in this example:
+
+ EOT
+
+ echo " $(basename $0) --lilo /boot/vmlinuz-generic-smp-2.6.35.11-smp >>/etc/lilo.conf"
+
+ cat <<-EOT
+
+ That command will result in the following lines being added to your
+ '/etc/lilo.conf' file (example for my hardware):
+
+ # Linux bootable partition config begins
+ # initrd created with 'mkinitrd -c -k 2.6.35.11-smp -m ata_generic:pata_amd:mbcache:jbd:ext3 -f ext3 -r /dev/hda7'
+ image = /boot/vmlinuz-generic-smp-2.6.35.11-smp
+ initrd = /boot/initrd.gz
+ root = /dev/hda7
+ label = 2.6.35.11-smp
+ read-only
+ # Linux bootable partition config ends
+
+ The last two examples show how easy it is to configure your computer
+ for the use of an initrd if you need one. The only thing left to do
+ afterwards is running 'lilo'.
+
+ EOT
+}
+
+# Find the device that holds the root partition:
+get_root_device() {
+ if [ -e $FSTAB ]; then
+ RD=$(cat $FSTAB |tr '\t' ' ' |grep -v '^ *#' |tr -s ' ' |grep ' / ' |cut -f1 -d' ')
+ if [ "$(echo $RD | cut -f1 -d=)" = "LABEL" -o "$(echo $RD | cut -f1 -d=)" = "UUID" ]; then
+ DKEY=$(echo $RD | cut -f1 -d=)
+ # The value can be LABEL=foo or LABEL='foo' or LABEL="foo"
+ DVAL=$(echo $RD | cut -f2 -d= | tr -d "'\042")
+ RD=$(/sbin/blkid | grep -w $DKEY | grep -w $DVAL | cut -f1 -d:)
+ fi
+ else
+ RD=$(grep -m1 "^/dev/.*[[:blank:]]/[[:blank:]]" /proc/mounts | cut -f1 -d' ')
+ fi
+ echo $RD
+}
+
+# Get the root fs information:
+get_rootfs_type() {
+ if $(type blkid 1>/dev/null 2>&1) ; then
+ blkid -s TYPE -o value $ROOTDEV
+ elif $(type vol_id 1>/dev/null 2>&1) ; then
+ vol_id $ROOTDEV | grep ID_FS_TYPE | cut -f2 -d=
+ else
+ # As a fallback, use:
+ cat $FSTAB |tr '\t' ' ' |grep -v '^ *#' |tr -s ' ' |grep ' / ' |cut -f3 -d' '
+ fi
+}
+
+# Add the module(s) needed for the root filesystem:
+add_rootfs_module() {
+ local FSMOD
+ FSMOD=$(/sbin/modprobe --set-version $KVER --show-depends ${ROOTFS} 2>/dev/null | while read LINE; do
+ echo $(basename $(echo $LINE | cut -d' ' -f2) .ko )
+ done)
+ if [ -n "$FSMOD" ]; then
+ [ -n "$MLIST" ] && echo "$MLIST:$(echo $FSMOD | tr ' ' ':')" \
+ || echo $FSMOD | tr ' ' ':'
+ fi
+}
+
+# Determine the list of kernel modules needed to support the root device:
+determine_blockdev_drivers() {
+ # Walk the /sys tree to find kernel modules that are
+ # required for our storage devices.
+ # Thanks to PiterPUNK for help with this code.
+ local MLIST
+ MLIST=$(for i in $(find /sys/block/*/ -name "device" -print0 | xargs -0 -i'{}' readlink -f '{}' | sort -u); do
+ /sbin/udevadm info --query=all --path=$i --attribute-walk | \
+ sed -ne 's/^[[:blank:]]\+DRIVER[S]*=="\([^"]\+\)"$/\1/p' | \
+ xargs -I@ /sbin/modprobe --set-version $KVER --show-depends @ \
+ 2>/dev/null | grep -v "builtin " | \
+ while read LINE ; do
+ echo $(basename $(echo $LINE | cut -d' ' -f2) .ko )
+ done
+ done)
+ MLIST=$( echo $MLIST | tr ' ' ':' )
+ echo $MLIST
+}
+
+# Search for USB keyboards:
+function add_usb_keyboard() {
+ local USBMOD
+ if cat /proc/bus/input/devices | sed -e 's/^$/\$/g' | \
+ tr "\n$" " \n" | grep -q " Phys=.*usb.* .*Handlers=.*kbd.*B:"; then
+ USBMOD="xhci-pci:ohci-pci:ehci-pci:xhci-hcd:uhci-hcd:ehci-hcd:hid:usbhid:i2c-hid:hid_generic:hid-cherry:hid-logitech:hid-logitech-dj:hid-logitech-hidpp:hid-lenovo:hid-microsoft:hid_multitouch"
+ [ -n "$MLIST" ] && MLIST="$MLIST:$USBMOD" \
+ || MLIST="$USBMOD"
+ fi
+ echo $MLIST
+}
+
+# Determine what USB Host Controller is in use
+function add_usb_hcd() {
+ local USBMOD
+ for i in $(ls -Ld /sys/module/*_hcd/drivers/* 2> /dev/null); do
+ if ls -L $i | grep -q "[0-9a-f]*:" ; then
+ USBMOD=$( echo $i | cut -f4 -d/ | tr "_" "-")
+ [ -n "$MLIST" ] && MLIST="$MLIST:$USBMOD" \
+ || MLIST="$USBMOD"
+ fi
+ done
+ echo $MLIST
+}
+
+# Is the root partition on a (combination of) LVM/LUKS volume?
+check_luks_lvm_raid() {
+ if $( lvdisplay -c $ROOTDEV 1>/dev/null 2>/dev/null ); then
+ # Our root partition is on a LV:
+ USING_LVM=1
+ # Search the Physical Volume of our Logical Volume:
+ MYVG=$( echo $(lvdisplay -c $ROOTDEV 2>/dev/null) | cut -d: -f2 )
+ for LINE in $(pvdisplay -c) ; do
+ VG=$(echo $LINE | cut -d: -f2)
+ [ "$VG" = "$MYVG" ] && break
+ done
+ PV=$(echo $LINE | cut -d: -f1)
+ # Check if there is a LUKS device underneath:
+ if $( cryptsetup status $PV 1>/dev/null 2>/dev/null ) ; then
+ # Our root partition's LV is on a LUKS volume:
+ USING_LUKS=1
+ REALDEV=$( cryptsetup status $PV | grep 'device: ' | tr -d ' ' | cut -d: -f2 )
+ BASEDEV=$REALDEV
+ else
+ BASEDEV=$PV
+ fi
+ elif $( cryptsetup status $ROOTDEV 1>/dev/null 2>/dev/null ) ; then
+ # Our root device is on a LUKS volume:
+ USING_LUKS=1
+ REALDEV=$( cryptsetup status $ROOTDEV | grep 'device: ' | tr -d ' ' | cut -d: -f2 )
+ ROOTDEV=$(basename $ROOTDEV)
+ # Check for LVM:
+ for LV in $(lvdisplay -c 2>/dev/null | tr -d ' ' | cut -f1 -d:) ; do
+ # Note: cryptsetup shows the real device, whereas
+ # lvdisplay requires the /dev/<myvg>/... symlink to the real device.
+ if [ "$(readlink $LV)" = "$REALDEV" ]; then
+ REALDEV=$LV
+ break
+ fi
+ done
+ if $( lvdisplay -c $REALDEV 1>/dev/null 2>/dev/null ); then
+ # Our root partition's LUKS device is on a LV:
+ USING_LVM=1
+ # Search the Physical Volume of our Logical Volume:
+ MYVG=$( echo $(lvdisplay -c $REALDEV 2>/dev/null) | cut -d: -f2 )
+ for LINE in $(pvdisplay -c) ; do
+ VG=$(echo $LINE | cut -d: -f2)
+ [ "$VG" = "$MYVG" ] && break
+ done
+ PV=$(echo $LINE | cut -d: -f1)
+ BASEDEV=$PV
+ else
+ BASEDEV=$REALDEV
+ fi
+ else
+ BASEDEV=$ROOTDEV
+ fi
+
+ # Finally, we should check if base device is
+ # a real block device or a RAID volume:
+ for MD in $(cat /proc/mdstat | grep -w active | cut -d' ' -f1) ; do
+ if [ "$BASEDEV" = "/dev/$MD" ]; then
+ USING_RAID=1
+ break
+ fi
+ done
+}
+
+# Before we start
+[ -x /bin/id ] && CMD_ID="/bin/id" || CMD_ID="/usr/bin/id"
+if [ "$($CMD_ID -u)" != "0" ]; then
+ echo "You need to be root to run $(basename $0)."
+ exit 1
+fi
+
+# Parse the commandline parameters:
+while [ ! -z "$1" ]; do
+ case $1 in
+ --longhelp)
+ basic_usage
+ extended_usage
+ exit 0
+ ;;
+ -a)
+ MKINIT_PARAMS="$2"
+ shift 2
+ ;;
+ -c|--conf)
+ [ -n "$EMIT" ] && { echo "Do not mix incompatible parameters!"; exit 1; }
+ EMIT="conf"
+ shift
+ ;;
+ -h|--help)
+ basic_usage
+ exit 0
+ ;;
+ -i|--interactive)
+ INTERACTIVE=1
+ shift
+ ;;
+ -k)
+ KVER=$2
+ shift 2
+ ;;
+ -m)
+ MKINIT_MODS=$2
+ shift 2
+ ;;
+ -l|--lilo)
+ [ -n "$EMIT" ] && { echo "Do not mix incompatible parameters!"; exit 1; }
+ EMIT="lilo"
+ shift
+ ;;
+ -L|--fromlilo)
+ FROMLILO=1
+ shift
+ ;;
+ -r|--run)
+ [ -n "$EMIT" ] && { echo "Do not mix incompatible parameters!"; exit 1; }
+ EMIT="run"
+ shift
+ ;;
+ -R|--rootdev)
+ ROOTDEV=$2
+ shift 2
+ ;;
+ -*)
+ echo "Unsupported parameter '$1'!"
+ exit 1
+ ;;
+ *) # Everything else but switches (which start with '-') follows:
+ if [ -f $1 ]; then
+ KFILE=$1
+ # Construction of KFILE's full filename:
+ KFILEPATH=$(cd $(dirname $KFILE) && pwd)
+ if [ -L $KFILE ]; then
+ KFILE=$(readlink $KFILE)
+ else
+ KFILE=$(basename $KFILE)
+ fi
+ KFILE=${KFILEPATH}/$KFILE
+ if [ -z "$(file $KFILE | grep -E 'Linux kernel x86 boot|x86 boot sector')" ]; then
+ echo "File '$KFILE' does not look like it is a kernel file!"
+ exit 1
+ fi
+ else
+ echo "File $1 not found!"
+ exit 1
+ fi
+ shift
+ ;;
+ esac
+done
+
+# Determine what to show as output (other options may have set EMIT already)
+EMIT=${EMIT:-"all"}
+
+# An EMIT value of 'lilo' requires a kernel filename as script parameter:
+if [ "$EMIT" = "lilo" ]; then
+ if [ -z "$KFILE" ]; then
+ echo "A kernel_filename is required with the '-l|--lilo' option!"
+ exit 1
+ fi
+fi
+
+# Determine kernel version to use,
+# and check if modules for this kernel are actually present:
+if [ -z "$KVER" ]; then
+ if [ -n "$KFILE" ]; then
+ KVER="$(strings $KFILE | grep '([^ ]*@[^ ]*) #' | cut -f1 -d' ')"
+ else
+ KVER="$(uname -r)"
+ fi
+fi
+if [ ! -d /lib/modules/$KVER ]; then
+ echo "Modules for kernel $KVER aren't installed."
+ exit 1
+fi
+
+# Determine whether the user passed an alternate filename for the initrd:
+if [ -n "$MKINIT_PARAMS" ]; then
+ SRCHLIST="$MKINIT_PARAMS"
+ for ELEM in $MKINIT_PARAMS ; do
+ SRCHLIST=$(echo $SRCHLIST | cut -d' ' -f2-) # cut ELEM from the list
+ if [ "$ELEM" = "-o" ]; then
+ IMGFILE=$(echo $SRCHLIST | cut -d' ' -f1)
+ break
+ fi
+ done
+fi
+IMGFILE=${IMGFILE:-"/boot/initrd.gz"}
+
+# Get information about the root device / root filesystem:
+ROOTDEV=${ROOTDEV:-$(get_root_device)}
+ROOTFS=$(get_rootfs_type)
+
+# Determine the list of kernel modules needed to support the root device:
+MLIST=$(determine_blockdev_drivers)
+
+# Check if we are running in a kvm guest with virtio block device driver
+# (add all virtio modules, we sort out the doubles later):
+if echo $MLIST | grep -q "virtio"; then
+ MLIST="$MLIST:virtio:virtio_balloon:virtio_blk:virtio_ring:virtio_pci:virtio_net"
+fi
+
+# Determine if a USB keyboard is in use and include usbhid and hid_generic
+# to module list
+MLIST=$(add_usb_keyboard)
+
+# If we use any USB module, try to determine the Host Controller
+if echo $MLIST | grep -q "usb"; then
+ MLIST=$(add_usb_hcd)
+fi
+
+# Check what combination of LUKS/LVM/RAID we have to support:
+# This sets values for USING_LUKS, USING_LVM, USING_RAID, REALDEV and BASEDEV.
+check_luks_lvm_raid
+
+# This is the interactive part:
+if [ "$INTERACTIVE" = "1" ]; then
+ if [ "$FROMLILO" != "1" ]; then
+ dialog --stdout --title "WELCOME TO MKINITRD COMMAND GENERATOR" --msgbox "\
+The main goal of this utility is to create a good initrd to \
+fit your needs. It can detect what kernel you are running, \
+what is your root device, root filesystem, if you use encryption, \
+LVM, RAID, etc. \
+\n\n\
+Usually the probed values are OK and they will be the \
+defaults in all subsequent dialogs, but maybe you want \
+to change something. \n\
+If in doubt, leave the defaults." 0 0
+
+ KVER=$( ls -d1 --indicator-style=none /lib/modules/* | \
+ awk -F/ -vVER=$KVER '{
+ if ( VER == $NF ) {
+ ONOFF="on"
+ } else {
+ ONOFF="off"
+ } ; printf("%s \"\" %s\n",$NF,ONOFF) }' | \
+ xargs dialog --stdout --title "CHOOSE KERNEL VERSION" \
+ --default-item $KVER --radiolist "\
+Please, select the kernel version you want to create this initrd for." 0 0 4 )
+ [ -z "$KVER" ] && exit 1
+
+ OLDROOTDEV=$ROOTDEV
+ ROOTDEV=$( dialog --stdout --title "SELECT ROOT DEVICE" --inputbox "\
+Enter your root device. Root device is the one where your '/' filesystem \
+is mounted." 0 0 "$ROOTDEV" )
+ [ -z "$ROOTDEV" ] && exit 1
+
+ # We need to re-check our defaults in case the user changed the default
+ # value for ROOTDEV:
+ [ "$OLDROOTDEV" != "$ROOTDEV" ] && check_luks_lvm_raid
+ ROOTFS=$(get_rootfs_type)
+
+ ROOTFS=$( dialog --stdout --title "SELECT ROOT FILESYSTEM" --inputbox "\
+Enter the type of your root filesystem." 0 0 "$ROOTFS" )
+ [ -z "$ROOTFS" ] && exit 1
+ fi
+
+ MLIST=$(add_rootfs_module)
+
+ LLR=$( dialog --stdout --title "LVM/LUKS/RAID" --checklist "\
+Do you use some of those in your root filesystem? \
+If this is the case, please select one or more options." 12 45 3 \
+"LVM" "Logical Volume Manager" $([ "$USING_LVM" = "1" ] && echo on || echo off) \
+"LUKS" "Linux Unified Key Setup" $([ "$USING_LUKS" = "1" ] && echo on || echo off) \
+"RAID" "Linux Software RAID" $([ "$USING_RAID" = "1" ] && echo on || echo off))
+
+ if [ "$?" != "0" ]; then
+ exit 1
+ fi
+
+ echo $LLR | grep -q LUKS && USING_LUKS="1"
+ echo $LLR | grep -q LVM && USING_LVM="1"
+ echo $LLR | grep -q RAID && USING_RAID="1"
+
+ if [ "$USING_LUKS" = "1" ]; then
+ REALDEV=$( dialog --stdout --title "LUKS ROOT DEVICE" --inputbox "\
+Please, enter your LUKS root device:" 0 0 "$REALDEV" )
+ [ -z "$REALDEV" ] && exit 1
+ fi
+fi
+
+# Step out of the interactive loop for a moment. The next block needs to be
+# executed in all cases.
+
+# We need to 'undouble' the MLIST array. Some people report that walking the
+# /sys tree produces duplicate modules in the list.
+# The awk command elimitates doubles without changing the order:
+MLIST=$( echo $MLIST | tr ':' '\n' | awk '!x[$0]++' | tr '\n' ' ' )
+MLIST=$( echo $MLIST | tr ' ' ':' )
+MLIST=$(echo ${MLIST%:}) # To weed out a trailing ':' which was reported once.
+
+# Back to the interactive part:
+
+if [ "$INTERACTIVE" = "1" ]; then
+ MLIST=$( dialog --stdout --title "INITRD'S MODULE LIST" --inputbox "\
+The list here shows all modules needed to support your root filesystem \
+and boot from it. But you can change the list to use some alternative \
+or additional modules. If you don't know what to do, the default is safe." \
+0 0 "$MLIST" )
+ if [ "$?" != "0" ]; then
+ exit 1
+ fi
+
+ EXTRA=$( dialog --stdout --title "EXTRA CONFIGURATION" --checklist "\
+Now is your chance for some additional configuration. All of these \
+configurations are optional and you can stick to the defaults." 11 72 3 \
+"KEYMAP" "Select keyboard layout (default: US)" \
+ $([ $USING_LUKS = 1 ] && echo on || echo off) \
+"RESUMEDEV" "Select device for 'suspend-to-disk' feature" off \
+"UDEV" "Use UDEV in the initrd for device configuration" $(test $UDEV -eq 1 && echo on || echo off) \
+"WAIT" "Add delay to allow detection of slow disks at boot" $(test $WAIT -gt $WAIT_DEFAULT && echo on || echo off) )
+ if [ "$?" != "0" ]; then
+ exit 1
+ fi
+
+ if echo $EXTRA | grep -q KEYMAP ; then
+ KEYMAP=$( dialog --stdout --title "KEYBOARD LAYOUT SELECTION" \
+ --cancel-label "Skip" \
+ --menu "You may select one of the following keyboard layouts. \
+If you do not select a keyboard map, 'us.map' \
+(the US keyboard layout) is the default. Use the UP/DOWN \
+arrow keys and PageUp/PageDown to scroll \
+through the whole list of choices." \
+22 55 11 \
+"qwerty/us.map" "" \
+"azerty/azerty.map" "" \
+"azerty/be-latin1.map" "" \
+"azerty/fr-latin0.map" "" \
+"azerty/fr-latin1.map" "" \
+"azerty/fr-latin9.map" "" \
+"azerty/fr-old.map" "" \
+"azerty/fr-pc.map" "" \
+"azerty/fr.map" "" \
+"azerty/wangbe.map" "" \
+"azerty/wangbe2.map" "" \
+"dvorak/ANSI-dvorak.map" "" \
+"dvorak/dvorak-l.map" "" \
+"dvorak/dvorak-r.map" "" \
+"dvorak/dvorak.map" "" \
+"dvorak/no-dvorak.map" "" \
+"fgGIod/tr_f-latin5.map" "" \
+"fgGIod/trf-fgGIod.map" "" \
+"olpc/es-olpc.map" "" \
+"olpc/pt-olpc.map" "" \
+"qwerty/bg-cp1251.map" "" \
+"qwerty/bg-cp855.map" "" \
+"qwerty/bg_bds-cp1251.map" "" \
+"qwerty/bg_bds-utf8.map" "" \
+"qwerty/bg_pho-cp1251.map" "" \
+"qwerty/bg_pho-utf8.map" "" \
+"qwerty/br-abnt.map" "" \
+"qwerty/br-abnt2.map" "" \
+"qwerty/br-latin1-abnt2.map" "" \
+"qwerty/br-latin1-us.map" "" \
+"qwerty/by-cp1251.map" "" \
+"qwerty/by.map" "" \
+"qwerty/bywin-cp1251.map" "" \
+"qwerty/cf.map" "" \
+"qwerty/cz-cp1250.map" "" \
+"qwerty/cz-lat2-prog.map" "" \
+"qwerty/cz-lat2.map" "" \
+"qwerty/cz-qwerty.map" "" \
+"qwerty/defkeymap.map" "" \
+"qwerty/defkeymap_V1.0.map" "" \
+"qwerty/dk-latin1.map" "" \
+"qwerty/dk.map" "" \
+"qwerty/emacs.map" "" \
+"qwerty/emacs2.map" "" \
+"qwerty/es-cp850.map" "" \
+"qwerty/es.map" "" \
+"qwerty/et-nodeadkeys.map" "" \
+"qwerty/et.map" "" \
+"qwerty/fi-latin1.map" "" \
+"qwerty/fi-latin9.map" "" \
+"qwerty/fi-old.map" "" \
+"qwerty/fi.map" "" \
+"qwerty/gr-pc.map" "" \
+"qwerty/gr.map" "" \
+"qwerty/hu101.map" "" \
+"qwerty/il-heb.map" "" \
+"qwerty/il-phonetic.map" "" \
+"qwerty/il.map" "" \
+"qwerty/is-latin1-us.map" "" \
+"qwerty/is-latin1.map" "" \
+"qwerty/it-ibm.map" "" \
+"qwerty/it.map" "" \
+"qwerty/it2.map" "" \
+"qwerty/jp106.map" "" \
+"qwerty/kazakh.map" "" \
+"qwerty/kyrgyz.map" "" \
+"qwerty/la-latin1.map" "" \
+"qwerty/lt.baltic.map" "" \
+"qwerty/lt.l4.map" "" \
+"qwerty/lt.map" "" \
+"qwerty/mk-cp1251.map" "" \
+"qwerty/mk-utf.map" "" \
+"qwerty/mk.map" "" \
+"qwerty/mk0.map" "" \
+"qwerty/nl.map" "" \
+"qwerty/nl2.map" "" \
+"qwerty/no-latin1.map" "" \
+"qwerty/no.map" "" \
+"qwerty/pc110.map" "" \
+"qwerty/pl.map" "" \
+"qwerty/pl1.map" "" \
+"qwerty/pl2.map" "" \
+"qwerty/pl3.map" "" \
+"qwerty/pl4.map" "" \
+"qwerty/pt-latin1.map" "" \
+"qwerty/pt-latin9.map" "" \
+"qwerty/pt.map" "" \
+"qwerty/ro.map" "" \
+"qwerty/ro_std.map" "" \
+"qwerty/ru-cp1251.map" "" \
+"qwerty/ru-ms.map" "" \
+"qwerty/ru-yawerty.map" "" \
+"qwerty/ru.map" "" \
+"qwerty/ru1.map" "" \
+"qwerty/ru2.map" "" \
+"qwerty/ru3.map" "" \
+"qwerty/ru4.map" "" \
+"qwerty/ru_win.map" "" \
+"qwerty/ruwin_alt-CP1251.map" "" \
+"qwerty/ruwin_alt-KOI8-R.map" "" \
+"qwerty/ruwin_alt-UTF-8.map" "" \
+"qwerty/ruwin_cplk-CP1251.map" "" \
+"qwerty/ruwin_cplk-KOI8-R.map" "" \
+"qwerty/ruwin_cplk-UTF-8.map" "" \
+"qwerty/ruwin_ct_sh-CP1251.map" "" \
+"qwerty/ruwin_ct_sh-KOI8-R.map" "" \
+"qwerty/ruwin_ct_sh-UTF-8.map" "" \
+"qwerty/ruwin_ctrl-CP1251.map" "" \
+"qwerty/ruwin_ctrl-KOI8-R.map" "" \
+"qwerty/ruwin_ctrl-UTF-8.map" "" \
+"qwerty/se-fi-ir209.map" "" \
+"qwerty/se-fi-lat6.map" "" \
+"qwerty/se-ir209.map" "" \
+"qwerty/se-lat6.map" "" \
+"qwerty/se-latin1.map" "" \
+"qwerty/sk-prog-qwerty.map" "" \
+"qwerty/sk-qwerty.map" "" \
+"qwerty/speakup-jfw.map" "" \
+"qwerty/speakupmap.map" "" \
+"qwerty/sr-cy.map" "" \
+"qwerty/sv-latin1.map" "" \
+"qwerty/tr_q-latin5.map" "" \
+"qwerty/tralt.map" "" \
+"qwerty/trf.map" "" \
+"qwerty/trq.map" "" \
+"qwerty/ttwin_alt-UTF-8.map.gz" "" \
+"qwerty/ttwin_cplk-UTF-8.map.gz" "" \
+"qwerty/ttwin_ct_sh-UTF-8.map.gz" "" \
+"qwerty/ttwin_ctrl-UTF-8.map.gz" "" \
+"qwerty/ua-cp1251.map.gz" "" \
+"qwerty/ua-utf-ws.map" "" \
+"qwerty/ua-utf.map" "" \
+"qwerty/ua-ws.map" "" \
+"qwerty/ua.map" "" \
+"qwerty/uk.map" "" \
+"qwerty/us-acentos.map" "" \
+"qwerty/us.map" "" \
+"qwertz/croat.map" "" \
+"qwertz/cz-us-qwertz.map" "" \
+"qwertz/cz.map" "" \
+"qwertz/de-latin1-nodeadkeys.map" "" \
+"qwertz/de-latin1.map" "" \
+"qwertz/de.map" "" \
+"qwertz/de_CH-latin1.map" "" \
+"qwertz/fr_CH-latin1.map" "" \
+"qwertz/fr_CH.map" "" \
+"qwertz/hu.map" "" \
+"qwertz/sg-latin1-lk450.map" "" \
+"qwertz/sg-latin1.map" "" \
+"qwertz/sg.map" "" \
+"qwertz/sk-prog-qwertz.map" "" \
+"qwertz/sk-qwertz.map" "" \
+"qwertz/slovene.map" "" )
+ [ -n "$KEYMAP" ] && KEYMAP=$(basename $KEYMAP .map)
+ fi
+
+ if echo $EXTRA | grep -q UDEV ; then
+ UDEV=1
+ fi
+
+ if echo $EXTRA | grep -q RESUMEDEV ; then
+ # Print information about swap partitions:
+ FREERAM=$(free -k | grep "^Mem:" | tr -s ' ' | cut -d' ' -f2)
+ SWPINFO=""
+ for SWPDEV in $(grep -w swap $FSTAB | cut -d' ' -f1) ; do
+ SWPINFO="$SWPINFO $SWPDEV Linux swap partition $(fdisk -s $SWPDEV) KB \\n"
+ [ $(fdisk -s $SWPDEV) -gt $FREERAM ] && RESUMEDEV=$SWPDEV
+ done
+ FREERAM=$(free -m | grep "^Mem:" | tr -s ' ' | cut -d' ' -f2)
+ RESUMEDEV=$( dialog --stdout --no-collapse --title "HIBERNATE RESUME DEVICE" --inputbox "\
+When using suspend-to-disk feature (hibernate), your computer's RAM is copied \
+to a swap device when it shuts down. The kernel will resume from that RAM \
+image at boot. This means that the swap partition must not be smaller than \
+the amount of RAM you have ($FREERAM MB). \n\
+$SWPINFO \n\
+Please specify a swap partition to be used for hibernation:" \
+0 0 "$RESUMEDEV")
+ [ -z "$RESUMEDEV" ] && exit 1
+ fi
+
+ if echo $EXTRA | grep -q WAIT ; then
+ WAIT=$( dialog --stdout --title "WAIT FOR ROOT DEVICE" --inputbox "\
+Some block devices are too slow to be detected properly at boot. USB storage \
+devices and some disk arrays have this 'feature'. To make your machine \
+boot properly, you can add some delay here, to wait until all your disks are \
+probed and detected. The time is in seconds:" 0 0 "$WAIT")
+ [ -z "$WAIT" ] && exit 1
+ fi
+
+ IMGFILE=$( dialog --stdout --title "INITRD IMAGE NAME" --inputbox "\
+Enter your initrd image filename." 0 0 "$IMGFILE" )
+ [ -z "$IMGFILE" ] && exit 1
+
+else
+ MLIST=$(add_rootfs_module)
+fi
+
+# Add any modules passed along on the commandline:
+if [ -n "$MKINIT_MODS" ]; then
+ [ -n "$MLIST" ] && MLIST="$MLIST:$(echo $MKINIT_MODS | tr ' ' ':')" \
+ || MLIST="$(echo $MKINIT_MODS | tr ' ' ':')"
+fi
+
+# Constructing the mkinitrd command:
+MKINIT="mkinitrd -c -k $KVER -f $ROOTFS -r $ROOTDEV"
+
+# If we have a module list, add them:
+if ! [ -z "$MLIST" -o "$MLIST" = ":" ]; then
+ MKINIT="$MKINIT -m $MLIST"
+fi
+
+# Deal with LUKS/LVM/RAID:
+if [ "$USING_LUKS" = "1" ]; then
+ MKINIT="$MKINIT -C $REALDEV"
+fi
+if [ "$USING_LVM" = "1" ]; then
+ MKINIT="$MKINIT -L"
+fi
+if [ "$USING_RAID" = "1" ]; then
+ MKINIT="$MKINIT -R"
+fi
+
+if [ -n "$RESUMEDEV" ]; then
+ # Add hibernation partition:
+ MKINIT="$MKINIT -h $RESUMEDEV"
+fi
+if [ -n "$KEYMAP" -a "$KEYMAP" != "us" ]; then
+ # Add non-us keyboard mapping:
+ MKINIT="$MKINIT -l $KEYMAP"
+fi
+if [ $UDEV -eq 1 ]; then
+ # Add UDEV support:
+ MKINIT="$MKINIT -u"
+fi
+if [ -n "$WAIT" -a $WAIT -ne $WAIT_DEFAULT ]; then
+ # Add non-default wait time:
+ MKINIT="$MKINIT -w $WAIT"
+fi
+if ! echo "$MKINIT_PARAMS" | grep -q -- '-o ' ; then
+ # Add default output filename:
+ MKINIT="$MKINIT -o $IMGFILE"
+fi
+if [ -n "$MKINIT_PARAMS" ]; then
+ # Add user-supplied additional parameters:
+ MKINIT="$MKINIT $MKINIT_PARAMS"
+fi
+
+# Notify the user:
+if [ "$EMIT" = "all" ]; then
+ cat <<-EOT
+ #
+ # $(basename $0) revision $REV
+ #
+ # This script will now make a recommendation about the command to use
+ # in case you require an initrd image to boot a kernel that does not
+ # have support for your storage or root filesystem built in
+ # (such as the Slackware 'generic' kernels').
+ # A suitable 'mkinitrd' command will be:
+
+ $MKINIT
+ EOT
+elif [ "$EMIT" = "run" ]; then
+ echo "$MKINIT"
+elif [ "$EMIT" = "conf" ]; then
+ cat <<-EOT
+ SOURCE_TREE="$SOURCE_TREE"
+ CLEAR_TREE="$CLEAR_TREE"
+ OUTPUT_IMAGE="$IMGFILE"
+ KERNEL_VERSION="$KVER"
+ KEYMAP="$KEYMAP"
+ MODULE_LIST="$(echo $MLIST | cut -f2 -d\ )"
+ LUKSDEV="$REALDEV"
+ ROOTDEV="$ROOTDEV"
+ ROOTFS="$ROOTFS"
+ RESUMEDEV="$RESUMEDEV"
+ RAID="$USING_RAID"
+ LVM="$USING_LVM"
+ UDEV="$UDEV"
+ WAIT="$WAIT"
+ EOT
+fi
+
+if [ -n "$KFILE" ]; then
+ if [ "$EMIT" = "all" ]; then
+ cat <<-EOT
+ # An entry in 'etc/lilo.conf' for kernel '$KFILE' would look like this:
+ EOT
+ fi
+ if [ "$EMIT" = "all" -o "$EMIT" = "lilo" ]; then
+ # Compensate for the syntax used for the LUKS-on-LVM case:
+ [ "$(basename $ROOTDEV)" = "$ROOTDEV" ] && BASE="/dev/mapper/" || BASE=""
+ cat <<-EOT
+ # Linux bootable partition config begins
+ # initrd created with '$MKINIT'
+ image = $KFILE
+ initrd = $IMGFILE
+ root = $BASE$ROOTDEV
+ label = $KVER
+ read-only
+ # Linux bootable partition config ends
+ EOT
+ fi
+fi