diff options
Diffstat (limited to 'patches/source/bluez/bluez.SlackBuild')
| -rwxr-xr-x | patches/source/bluez/bluez.SlackBuild | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/patches/source/bluez/bluez.SlackBuild b/patches/source/bluez/bluez.SlackBuild new file mode 100755 index 00000000..5367ad9f --- /dev/null +++ b/patches/source/bluez/bluez.SlackBuild @@ -0,0 +1,199 @@ +#!/bin/sh + +# Slackware build script for bluez-utils - http://www.bluez.org + +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=bluez +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2_slack13.1} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/${PKGNAM}-${VERSION}.tar.?z* || exit 1 +cd $PKGNAM-$VERSION + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Fixup the dbus config file for our usage: +zcat $CWD/patches/bluez-dbus-config.patch.gz | patch -p1 --verbose || exit 1 + +# Use a wrapper to check rc.bluetooth mode before starting bluetoothd +zcat $CWD/patches/bluez-run_udev_helper.patch.gz | patch -p1 --verbose || exit 1 + +# Unbreak a Dell USB mouse +# https://bugzilla.novell.com/show_bug.cgi?id=522287 +# https://bugzilla.redhat.com/show_bug.cgi?id=517088 +zcat $CWD/patches/bluez-unbreak_dell_mouse.patch.gz | patch -p1 --verbose || exit 1 + +# Patch CVE-2017-1000251: +zcat $CWD/bluez.CVE-2017-1000251.diff.gz | patch -p1 --verbose || exit 1 + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --localstatedir=/var \ + --enable-gstreamer \ + --enable-alsa \ + --enable-usb \ + --enable-netlink \ + --enable-tools\ + --enable-bccmd \ + --enable-hid2hci \ + --enable-dfutool \ + --enable-hidd \ + --enable-pand \ + --enable-dund \ + --enable-cups \ + --enable-service \ + --enable-udevrules \ + --enable-configfiles \ + --disable-silent-rules \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +# I'm don't think we need this, but I'll leave it commented just in case: +# http://bugs.archlinux.org/task/4930 +# The dbus-1 and bluetooth linkages are obvious, but I had to get the rt and +# pthread ones from the old bluez-utils (VERSION=3.36) tests/Makefile +#gcc $SLKCFLAGS $(pkg-config --cflags dbus-1) -DVERSION=3.36 \ +# -L$(pwd)/lib/.libs -ldbus-1 -lbluetooth -lpthread -lrt \ +# $CWD/passkey-agent.c -o $PKG/usr/bin/passkey-agent || exit 1 + +cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1 +chmod 0755 $PKG/lib/udev/bluetooth_serial + +cat $CWD/config/bluetooth.sh > $PKG/lib/udev/bluetooth.sh +chmod 0755 $PKG/lib/udev/bluetooth.sh + +# SuSE says this is safe... :-) +mkdir -p $PKG/etc/modprobe.d +cat $CWD/config/bluetooth.modprobe > $PKG/etc/modprobe.d/bluetooth.conf + +mkdir -p $PKG/etc/bluetooth +cp -a audio/audio.conf $PKG/etc/bluetooth +cp -a input/input.conf $PKG/etc/bluetooth +cp -a network/network.conf $PKG/etc/bluetooth +cp -a serial/serial.conf $PKG/etc/bluetooth +cp -a tools/rfcomm.conf $PKG/etc/bluetooth +chmod 644 $PKG/etc/bluetooth/*.conf + +# Do not overwrite configuration +# Well, let the dbus file be overwritten, as it is not usually user-edited. +( cd $PKG + for file in \ + etc/alsa/bluetooth.conf \ + etc/bluetooth/audio.conf \ + etc/bluetooth/input.conf \ + etc/bluetooth/network.conf \ + etc/bluetooth/serial.conf \ + etc/bluetooth/rfcomm.conf \ + etc/bluetooth/main.conf \ + etc/modprobe.d/bluetooth.conf ; do + mv ${file} ${file}.new + done +) + +# Add an init script +mkdir -p $PKG/etc/rc.d +cat $CWD/config/rc.bluetooth > $PKG/etc/rc.d/rc.bluetooth.new + +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING* INSTALL NEWS README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + |