Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

6 files changed, 248 insertions, 0 deletions

diff --git a/source/n/ntp/doinst.sh b/source/n/ntp/doinst.sh
new file mode 100644
index 00000000..1e74ce44
--- /dev/null
+++ b/source/n/ntp/doinst.sh
@@ -0,0 +1,18 @@
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/ntp.conf.new
+config etc/ntp/ntp.keys.new
+if [ -r etc/rc.d/rc.ntpd -a -r etc/rc.d/rc.ntpd.new ]; then
+  chmod --reference=etc/rc.d/rc.ntpd etc/rc.d/rc.ntpd.new
+fi
+config etc/rc.d/rc.ntpd.new
diff --git a/source/n/ntp/ntp.SlackBuild b/source/n/ntp/ntp.SlackBuild
new file mode 100755
index 00000000..93ff1ee8
--- /dev/null
+++ b/source/n/ntp/ntp.SlackBuild
@@ -0,0 +1,112 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=4.2.4p7
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-ntp
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf ntp-${VERSION}*
+tar xvf $CWD/ntp-${VERSION}*.tar.?z* || exit 1
+cd ntp-${VERSION}* || exit 1
+chown -R root:root .
+find . \
+  \( -perm 2777 -o -perm 2755 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 777 -o -perm 775 -o -perm 774 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --localstatedir=/var \
+  --sysconfdir=/etc \
+  --bindir=/usr/sbin \
+  --sbindir=/usr/sbin \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Since the Makefile's install pays no heed to the --bindir settings,
+# we'll move things to where they've always been ourselves:
+mv $PKG/usr/bin/* $PKG/usr/sbin
+rmdir $PKG/usr/bin
+
+# This is just epty:
+rmdir $PKG/usr/lib || exit 1
+
+mkdir -p $PKG/etc/ntp
+cat $CWD/ntp.conf > $PKG/etc/ntp.conf.new
+cat $CWD/ntp.keys > $PKG/etc/ntp/ntp.keys.new
+chmod 600 $PKG/etc/ntp/ntp.keys.new
+touch $PKG/etc/ntp/step-tickers
+
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.ntpd > $PKG/etc/rc.d/rc.ntpd.new
+
+mkdir -p $PKG/usr/doc/ntp-$VERSION
+cp -a \
+  COPYRIGHT NEWS README* TODO WHERE-TO-START \
+  *.y2kfixes clockstuff conf html scripts \
+  $PKG/usr/doc/ntp-$VERSION
+mkdir $PKG/usr/doc/ntp-$VERSION/util
+cp -a util/README $PKG/usr/doc/ntp-$VERSION/util
+mkdir $PKG/usr/doc/ntp-$VERSION/ntpdate
+cp -a ntpdate/README $PKG/usr/doc/ntp-$VERSION/ntpdate
+( cd $PKG/usr/doc/ntp-$VERSION
+  find . -type d -name .deps -exec rm -rf {} \; 2> /dev/null
+)
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+gzip -9 $PKG/usr/man/man?/*.?
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/ntp-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/ntp/ntp.conf b/source/n/ntp/ntp.conf
new file mode 100644
index 00000000..b2476786
--- /dev/null
+++ b/source/n/ntp/ntp.conf
@@ -0,0 +1,44 @@
+# Sample /etc/ntp.conf:  Configuration file for ntpd.
+#
+# Undisciplined Local Clock. This is a fake driver intended for backup
+# and when no outside source of synchronized time is available. The
+# default stratum is usually 3, but in this case we elect to use stratum
+# 0. Since the server line does not have the prefer keyword, this driver
+# is never used for synchronization, unless no other other
+# synchronization source is available. In case the local host is
+# controlled by some external source, such as an external oscillator or
+# another protocol, the prefer keyword would cause the local host to
+# disregard all other synchronization sources, unless the kernel
+# modifications are in use and declare an unsynchronized condition.
+#
+server	127.127.1.0	# local clock
+fudge	127.127.1.0 stratum 10	
+#server  pool.ntp.org
+
+#
+# Drift file.  Put this in a directory which the daemon can write to.
+# No symbolic links allowed, either, since the daemon updates the file
+# by creating a temporary in the same directory and then rename()'ing
+# it to the file.
+#
+driftfile /etc/ntp/drift
+multicastclient			# listen on default 224.0.1.1
+broadcastdelay	0.008
+
+#
+# Keys file.  If you want to diddle your server at run time, make a
+# keys file (mode 600 for sure) and define the key number to be
+# used for making requests.
+# PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
+# systems might be able to reset your clock at will.
+#
+#keys		/etc/ntp/keys
+#trustedkey	65535
+#requestkey	65535
+#controlkey	65535
+
+# Don't serve time or stats to anyone else by default (more secure)
+restrict default noquery nomodify
+# Trust ourselves.  :-)
+restrict 127.0.0.1
+
diff --git a/source/n/ntp/ntp.keys b/source/n/ntp/ntp.keys
new file mode 100644
index 00000000..1c3fbd2c
--- /dev/null
+++ b/source/n/ntp/ntp.keys
@@ -0,0 +1,2 @@
+65535	M	akey
+1	M	pass
diff --git a/source/n/ntp/rc.ntpd b/source/n/ntp/rc.ntpd
new file mode 100644
index 00000000..2db421f6
--- /dev/null
+++ b/source/n/ntp/rc.ntpd
@@ -0,0 +1,53 @@
+#!/bin/sh
+# Start/stop/restart ntpd.
+
+# Start ntpd:
+ntpd_start() {
+  CMDLINE="/usr/sbin/ntpd -g"
+  echo -n "Starting NTP daemon:  $CMDLINE"
+  $CMDLINE -p /var/run/ntpd.pid
+  echo
+}
+
+# Stop ntpd:
+ntpd_stop() {
+  echo -n "Stopping NTP daemon..."
+  kill $(cat /var/run/ntpd.pid)
+  echo
+  sleep 1
+  rm -f /var/run/ntpd.pid
+  killall ntpd 2> /dev/null
+}
+
+# Restart ntpd:
+ntpd_restart() {
+  ntpd_stop
+  sleep 1
+  ntpd_start
+}
+
+# Check if ntpd is running
+ntpd_status() {
+  if [ -e /var/run/ntpd.pid ]; then
+    echo "ntpd is running."
+  else 
+    echo "ntpd is stopped."
+  fi
+}
+
+case "$1" in
+'start')
+  ntpd_start
+  ;;
+'stop')
+  ntpd_stop
+  ;;
+'restart')
+  ntpd_restart
+  ;;
+'status')
+  ntpd_status
+  ;;
+*)
+  echo "usage $0 start|stop|restart|status"
+esac
diff --git a/source/n/ntp/slack-desc b/source/n/ntp/slack-desc
new file mode 100644
index 00000000..6319e888
--- /dev/null
+++ b/source/n/ntp/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+ntp: ntp (Network Time Protocol daemon)
+ntp:
+ntp: The Network Time Protocol (NTP) is used to synchronize the time of a
+ntp: computer client or server to another server or reference time source,
+ntp: such as a radio or satellite receiver or modem. It provides client
+ntp: accuracies typically within a millisecond on LANs and up to a few tens
+ntp: of milliseconds on WANs relative to a primary server synchronized to
+ntp: Coordinated Universal Time (UTC) via a Global Positioning Service
+ntp: (GPS) receiver, for example. 
+ntp:
+ntp: