path: root/js/src/jit/x86-shared/AtomicOperations-x86-shared.h

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

/* For overall documentation, see jit/AtomicOperations.h */

#ifndef jit_shared_AtomicOperations_x86_shared_h
#define jit_shared_AtomicOperations_x86_shared_h

#include "mozilla/Assertions.h"
#include "mozilla/Types.h"

// Lock-freedom on x86 and x64:
//
// On x86 and x64 there are atomic instructions for 8-byte accesses:
//
// Load and stores:
// - Loads and stores are single-copy atomic for up to 8 bytes
//   starting with the Pentium; the store requires a post-fence for
//   sequential consistency
//
// CompareExchange:
// - On x64 CMPXCHGQ can always be used
// - On x86 CMPXCHG8B can be used starting with the first Pentium
//
// Exchange:
// - On x64 XCHGQ can always be used
// - On x86 one has to use a CompareExchange loop
//
// Observe also that the JIT will not be enabled unless we have SSE2,
// which was introduced with the Pentium 4.  Ergo the JIT will be able
// to use atomic instructions for up to 8 bytes on all x86 platforms
// for the primitives we care about.
//
// However, C++ compilers and libraries may not provide access to
// those 8-byte instructions directly.  Clang in 32-bit mode does not
// provide 8-byte atomic primitives at all (even with eg -arch i686
// specified).  On Windows 32-bit, MSVC does not provide
// _InterlockedExchange64 since it does not map directly to an
// instruction.
//
// There are thus sundry workarounds below to handle known corner
// cases.

#if defined(__clang__) || defined(__GNUC__)

// The default implementation tactic for gcc/clang is to use the newer
// __atomic intrinsics added for use in C++11 <atomic>.  Where that
// isn't available, we use GCC's older __sync functions instead.
//
// ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS is kept as a backward
// compatible option for older compilers: enable this to use GCC's old
// __sync functions instead of the newer __atomic functions.  This
// will be required for GCC 4.6.x and earlier, and probably for Clang
// 3.1, should we need to use those versions.

// #define ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS

// Lock-free 8-byte atomics are assumed on x86 but must be disabled in
// corner cases, see comments below and in isLockfree8().

# define LOCKFREE8

// This pertains to Clang compiling with -m32, in this case the 64-bit
// __atomic builtins are not available (observed on various Mac OS X
// versions with Apple Clang and on Linux with Clang 3.5).
//
// For now just punt: disable lock-free 8-word data.  The JIT will
// call isLockfree8() to determine what to do and will stay in sync.
// (Bug 1146817 tracks the work to improve on this.)

# if defined(__clang__) && defined(__i386)
#  undef LOCKFREE8
# endif

inline bool
js::jit::AtomicOperations::isLockfree8()
{
# ifndef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    MOZ_ASSERT(__atomic_always_lock_free(sizeof(int8_t), 0));
    MOZ_ASSERT(__atomic_always_lock_free(sizeof(int16_t), 0));
    MOZ_ASSERT(__atomic_always_lock_free(sizeof(int32_t), 0));
# endif
# ifdef LOCKFREE8
#  ifndef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    MOZ_ASSERT(__atomic_always_lock_free(sizeof(int64_t), 0));
#  endif
    return true;
# else
    return false;
# endif
}

inline void
js::jit::AtomicOperations::fenceSeqCst()
{
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    __sync_synchronize();
# else
    __atomic_thread_fence(__ATOMIC_SEQ_CST);
# endif
}

template<typename T>
inline T
js::jit::AtomicOperations::loadSeqCst(T* addr)
{
    MOZ_ASSERT(sizeof(T) < 8 || isLockfree8());
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    // Inhibit compiler reordering with a volatile load.  The x86 does
    // not reorder loads with respect to subsequent loads or stores
    // and no ordering barrier is required here.  See more elaborate
    // comments in storeSeqCst.
    T v = *static_cast<T volatile*>(addr);
# else
    T v;
    __atomic_load(addr, &v, __ATOMIC_SEQ_CST);
# endif
    return v;
}

# ifndef LOCKFREE8
template<>
inline int64_t
js::jit::AtomicOperations::loadSeqCst(int64_t* addr)
{
    MOZ_CRASH();
}

template<>
inline uint64_t
js::jit::AtomicOperations::loadSeqCst(uint64_t* addr)
{
    MOZ_CRASH();
}
# endif // LOCKFREE8

template<typename T>
inline void
js::jit::AtomicOperations::storeSeqCst(T* addr, T val)
{
    MOZ_ASSERT(sizeof(T) < 8 || isLockfree8());
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    // Inhibit compiler reordering with a volatile store.  The x86 may
    // reorder a store with respect to a subsequent load from a
    // different location, hence there is an ordering barrier here to
    // prevent that.
    //
    // By way of background, look to eg
    // http://bartoszmilewski.com/2008/11/05/who-ordered-memory-fences-on-an-x86/
    //
    // Consider:
    //
    //   uint8_t x = 0, y = 0; // to start
    //
    // thread1:
    //   sx: AtomicOperations::store(&x, 1);
    //   gy: uint8_t obs1 = AtomicOperations::loadSeqCst(&y);
    //
    // thread2:
    //   sy: AtomicOperations::store(&y, 1);
    //   gx: uint8_t obs2 = AtomicOperations::loadSeqCst(&x);
    //
    // Sequential consistency requires a total global ordering of
    // operations: sx-gy-sy-gx, sx-sy-gx-gy, sx-sy-gy-gx, sy-gx-sx-gy,
    // sy-sx-gy-gx, or sy-sx-gx-gy.  In every ordering at least one of
    // sx-before-gx or sy-before-gy happens, so *at least one* of
    // obs1/obs2 is 1.
    //
    // If AtomicOperations::{load,store}SeqCst were just volatile
    // {load,store}, x86 could reorder gx/gy before each thread's
    // prior load.  That would permit gx-gy-sx-sy: both loads would be
    // 0!  Thus after a volatile store we must synchronize to ensure
    // the store happens before the load.
    *static_cast<T volatile*>(addr) = val;
    __sync_synchronize();
# else
    __atomic_store(addr, &val, __ATOMIC_SEQ_CST);
# endif
}

# ifndef LOCKFREE8
template<>
inline void
js::jit::AtomicOperations::storeSeqCst(int64_t* addr, int64_t val)
{
    MOZ_CRASH();
}

template<>
inline void
js::jit::AtomicOperations::storeSeqCst(uint64_t* addr, uint64_t val)
{
    MOZ_CRASH();
}
# endif // LOCKFREE8

template<typename T>
inline T
js::jit::AtomicOperations::exchangeSeqCst(T* addr, T val)
{
    MOZ_ASSERT(sizeof(T) < 8 || isLockfree8());
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    T v;
    do {
        // Here I assume the compiler will not hoist the load.  It
        // shouldn't, because the CAS could affect* addr.
        v = *addr;
    } while (!__sync_bool_compare_and_swap(addr, v, val));
    return v;
# else
    T v;
    __atomic_exchange(addr, &val, &v, __ATOMIC_SEQ_CST);
    return v;
# endif
}

# ifndef LOCKFREE8
template<>
inline int64_t
js::jit::AtomicOperations::exchangeSeqCst(int64_t* addr, int64_t val)
{
    MOZ_CRASH();
}

template<>
inline uint64_t
js::jit::AtomicOperations::exchangeSeqCst(uint64_t* addr, uint64_t val)
{
    MOZ_CRASH();
}
# endif // LOCKFREE8

template<typename T>
inline T
js::jit::AtomicOperations::compareExchangeSeqCst(T* addr, T oldval, T newval)
{
    MOZ_ASSERT(sizeof(T) < 8 || isLockfree8());
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    return __sync_val_compare_and_swap(addr, oldval, newval);
# else
    __atomic_compare_exchange(addr, &oldval, &newval, false, __ATOMIC_SEQ_CST, __ATOMIC_SEQ_CST);
    return oldval;
# endif
}

# ifndef LOCKFREE8
template<>
inline int64_t
js::jit::AtomicOperations::compareExchangeSeqCst(int64_t* addr, int64_t oldval, int64_t newval)
{
    MOZ_CRASH();
}

template<>
inline uint64_t
js::jit::AtomicOperations::compareExchangeSeqCst(uint64_t* addr, uint64_t oldval, uint64_t newval)
{
    MOZ_CRASH();
}
# endif // LOCKFREE8

template<typename T>
inline T
js::jit::AtomicOperations::fetchAddSeqCst(T* addr, T val)
{
    static_assert(sizeof(T) <= 4, "not available for 8-byte values yet");
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    return __sync_fetch_and_add(addr, val);
# else
    return __atomic_fetch_add(addr, val, __ATOMIC_SEQ_CST);
# endif
}

template<typename T>
inline T
js::jit::AtomicOperations::fetchSubSeqCst(T* addr, T val)
{
    static_assert(sizeof(T) <= 4, "not available for 8-byte values yet");
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    return __sync_fetch_and_sub(addr, val);
# else
    return __atomic_fetch_sub(addr, val, __ATOMIC_SEQ_CST);
# endif
}

template<typename T>
inline T
js::jit::AtomicOperations::fetchAndSeqCst(T* addr, T val)
{
    static_assert(sizeof(T) <= 4, "not available for 8-byte values yet");
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    return __sync_fetch_and_and(addr, val);
# else
    return __atomic_fetch_and(addr, val, __ATOMIC_SEQ_CST);
# endif
}

template<typename T>
inline T
js::jit::AtomicOperations::fetchOrSeqCst(T* addr, T val)
{
    static_assert(sizeof(T) <= 4, "not available for 8-byte values yet");
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    return __sync_fetch_and_or(addr, val);
# else
    return __atomic_fetch_or(addr, val, __ATOMIC_SEQ_CST);
# endif
}

template<typename T>
inline T
js::jit::AtomicOperations::fetchXorSeqCst(T* addr, T val)
{
    static_assert(sizeof(T) <= 4, "not available for 8-byte values yet");
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    return __sync_fetch_and_xor(addr, val);
# else
    return __atomic_fetch_xor(addr, val, __ATOMIC_SEQ_CST);
# endif
}

template<typename T>
inline T
js::jit::AtomicOperations::loadSafeWhenRacy(T* addr)
{
    return *addr;               // FIXME (1208663): not yet safe
}

template<typename T>
inline void
js::jit::AtomicOperations::storeSafeWhenRacy(T* addr, T val)
{
    *addr = val;                // FIXME (1208663): not yet safe
}

inline void
js::jit::AtomicOperations::memcpySafeWhenRacy(void* dest, const void* src, size_t nbytes)
{
    ::memcpy(dest, src, nbytes); // FIXME (1208663): not yet safe
}

inline void
js::jit::AtomicOperations::memmoveSafeWhenRacy(void* dest, const void* src, size_t nbytes)
{
    ::memmove(dest, src, nbytes); // FIXME (1208663): not yet safe
}

template<size_t nbytes>
inline void
js::jit::RegionLock::acquire(void* addr)
{
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    while (!__sync_bool_compare_and_swap(&spinlock, 0, 1))
        continue;
# else
    uint32_t zero = 0;
    uint32_t one = 1;
    while (!__atomic_compare_exchange(&spinlock, &zero, &one, false, __ATOMIC_ACQUIRE, __ATOMIC_ACQUIRE)) {
        zero = 0;
        continue;
    }
# endif
}

template<size_t nbytes>
inline void
js::jit::RegionLock::release(void* addr)
{
    MOZ_ASSERT(AtomicOperations::loadSeqCst(&spinlock) == 1, "releasing unlocked region lock");
# ifdef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
    __sync_sub_and_fetch(&spinlock, 1); // Should turn into LOCK XADD
# else
    uint32_t zero = 0;
    __atomic_store(&spinlock, &zero, __ATOMIC_SEQ_CST);
# endif
}

# undef ATOMICS_IMPLEMENTED_WITH_SYNC_INTRINSICS
# undef LOCKFREE8

#elif defined(_MSC_VER)

// On 32-bit CPUs there is no 64-bit XCHG instruction, one must
// instead use a loop with CMPXCHG8B.  Since MSVC provides
// _InterlockedExchange64 only if it maps directly to XCHG, the
// workaround must be manual.

# define HAVE_EXCHANGE64

# if !_WIN64
#  undef HAVE_EXCHANGE64
# endif

// Below, _ReadWriteBarrier is a compiler directive, preventing
// reordering of instructions and reuse of memory values across it.

inline bool
js::jit::AtomicOperations::isLockfree8()
{
    // See general comments at the start of this file.
    //
    // The MSDN docs suggest very strongly that if code is compiled for
    // Pentium or better the 64-bit primitives will be lock-free, see
    // eg the "Remarks" secion of the page for _InterlockedCompareExchange64,
    // currently here:
    // https://msdn.microsoft.com/en-us/library/ttk2z1ws%28v=vs.85%29.aspx
    //
    // But I've found no way to assert that at compile time or run time,
    // there appears to be no WinAPI is_lock_free() test.
    return true;
}

inline void
js::jit::AtomicOperations::fenceSeqCst()
{
    _ReadWriteBarrier();
# if JS_BITS_PER_WORD == 32
    // If configured for SSE2+ we can use the MFENCE instruction, available
    // through the _mm_mfence intrinsic.  But for non-SSE2 systems we have
    // to do something else.  Linux uses "lock add [esp], 0", so why not?
    __asm lock add [esp], 0;
# else
    _mm_mfence();
# endif
}

template<typename T>
inline T
js::jit::AtomicOperations::loadSeqCst(T* addr)
{
    MOZ_ASSERT(sizeof(T) < 8 || isLockfree8());
    _ReadWriteBarrier();
    T v = *addr;
    _ReadWriteBarrier();
    return v;
}

template<typename T>
inline void
js::jit::AtomicOperations::storeSeqCst(T* addr, T val)
{
    MOZ_ASSERT(sizeof(T) < 8 || isLockfree8());
    _ReadWriteBarrier();
    *addr = val;
    fenceSeqCst();
}

# define MSC_EXCHANGEOP(T, U, xchgop)                           \
    template<> inline T                                         \
    js::jit::AtomicOperations::exchangeSeqCst(T* addr, T val) { \
        MOZ_ASSERT(sizeof(T) < 8 || isLockfree8());        \
        return (T)xchgop((U volatile*)addr, (U)val);            \
    }

# define MSC_EXCHANGEOP_CAS(T, U, cmpxchg)                           \
    template<> inline T                                              \
    js::jit::AtomicOperations::exchangeSeqCst(T* addr, T newval) {   \
        MOZ_ASSERT(sizeof(T) < 8 || isLockfree8());             \
        T oldval;                                                    \
        do {                                                         \
            _ReadWriteBarrier();                                     \
            oldval = *addr;                                          \
        } while (!cmpxchg((U volatile*)addr, (U)newval, (U)oldval)); \
        return oldval;                                               \
    }

MSC_EXCHANGEOP(int8_t, char, _InterlockedExchange8)
MSC_EXCHANGEOP(uint8_t, char, _InterlockedExchange8)
MSC_EXCHANGEOP(int16_t, short, _InterlockedExchange16)
MSC_EXCHANGEOP(uint16_t, short, _InterlockedExchange16)
MSC_EXCHANGEOP(int32_t, long, _InterlockedExchange)
MSC_EXCHANGEOP(uint32_t, long, _InterlockedExchange)
# ifdef HAVE_EXCHANGE64
MSC_EXCHANGEOP(int64_t, __int64, _InterlockedExchange64)
MSC_EXCHANGEOP(uint64_t, __int64, _InterlockedExchange64)
# else
MSC_EXCHANGEOP_CAS(int64_t, __int64, _InterlockedCompareExchange64)
MSC_EXCHANGEOP_CAS(uint64_t, __int64, _InterlockedCompareExchange64)
# endif

# undef MSC_EXCHANGEOP
# undef MSC_EXCHANGEOP_CAS

# define MSC_CAS(T, U, cmpxchg)                                                     \
    template<> inline T                                                             \
    js::jit::AtomicOperations::compareExchangeSeqCst(T* addr, T oldval, T newval) { \
        MOZ_ASSERT(sizeof(T) < 8 || isLockfree8());                            \
        return (T)cmpxchg((U volatile*)addr, (U)newval, (U)oldval);                 \
    }

MSC_CAS(int8_t, char, _InterlockedCompareExchange8)
MSC_CAS(uint8_t, char, _InterlockedCompareExchange8)
MSC_CAS(int16_t, short, _InterlockedCompareExchange16)
MSC_CAS(uint16_t, short, _InterlockedCompareExchange16)
MSC_CAS(int32_t, long, _InterlockedCompareExchange)
MSC_CAS(uint32_t, long, _InterlockedCompareExchange)
MSC_CAS(int64_t, __int64, _InterlockedCompareExchange64)
MSC_CAS(uint64_t, __int64, _InterlockedCompareExchange64)

# undef MSC_CAS

# define MSC_FETCHADDOP(T, U, xadd)                                           \
    template<> inline T                                                       \
    js::jit::AtomicOperations::fetchAddSeqCst(T* addr, T val) {               \
        static_assert(sizeof(T) <= 4, "not available for 8-byte values yet"); \
        return (T)xadd((U volatile*)addr, (U)val);                            \
    }                                                                         \
    template<> inline T                                                       \
    js::jit::AtomicOperations::fetchSubSeqCst(T* addr, T val) {               \
        static_assert(sizeof(T) <= 4, "not available for 8-byte values yet"); \
        return (T)xadd((U volatile*)addr, -(U)val);                           \
    }

MSC_FETCHADDOP(int8_t, char, _InterlockedExchangeAdd8)
MSC_FETCHADDOP(uint8_t, char, _InterlockedExchangeAdd8)
MSC_FETCHADDOP(int16_t, short, _InterlockedExchangeAdd16)
MSC_FETCHADDOP(uint16_t, short, _InterlockedExchangeAdd16)
MSC_FETCHADDOP(int32_t, long, _InterlockedExchangeAdd)
MSC_FETCHADDOP(uint32_t, long, _InterlockedExchangeAdd)

# undef MSC_FETCHADDOP

# define MSC_FETCHBITOP(T, U, andop, orop, xorop)                             \
    template<> inline T                                                       \
    js::jit::AtomicOperations::fetchAndSeqCst(T* addr, T val) {               \
        static_assert(sizeof(T) <= 4, "not available for 8-byte values yet"); \
        return (T)andop((U volatile*)addr, (U)val);                           \
    }                                                                         \
    template<> inline T                                                       \
    js::jit::AtomicOperations::fetchOrSeqCst(T* addr, T val) {                \
        static_assert(sizeof(T) <= 4, "not available for 8-byte values yet"); \
        return (T)orop((U volatile*)addr, (U)val);                            \
    }                                                                         \
    template<> inline T                                                       \
    js::jit::AtomicOperations::fetchXorSeqCst(T* addr, T val) {               \
        static_assert(sizeof(T) <= 4, "not available for 8-byte values yet"); \
        return (T)xorop((U volatile*)addr, (U)val);                           \
    }

MSC_FETCHBITOP(int8_t, char, _InterlockedAnd8, _InterlockedOr8, _InterlockedXor8)
MSC_FETCHBITOP(uint8_t, char, _InterlockedAnd8, _InterlockedOr8, _InterlockedXor8)
MSC_FETCHBITOP(int16_t, short, _InterlockedAnd16, _InterlockedOr16, _InterlockedXor16)
MSC_FETCHBITOP(uint16_t, short, _InterlockedAnd16, _InterlockedOr16, _InterlockedXor16)
MSC_FETCHBITOP(int32_t, long,  _InterlockedAnd, _InterlockedOr, _InterlockedXor)
MSC_FETCHBITOP(uint32_t, long, _InterlockedAnd, _InterlockedOr, _InterlockedXor)

# undef MSC_FETCHBITOP

template<typename T>
inline T
js::jit::AtomicOperations::loadSafeWhenRacy(T* addr)
{
    return *addr;               // FIXME (1208663): not yet safe
}

template<typename T>
inline void
js::jit::AtomicOperations::storeSafeWhenRacy(T* addr, T val)
{
    *addr = val;                // FIXME (1208663): not yet safe
}

inline void
js::jit::AtomicOperations::memcpySafeWhenRacy(void* dest, const void* src, size_t nbytes)
{
    ::memcpy(dest, src, nbytes); // FIXME (1208663): not yet safe
}

inline void
js::jit::AtomicOperations::memmoveSafeWhenRacy(void* dest, const void* src, size_t nbytes)
{
    ::memmove(dest, src, nbytes); // FIXME (1208663): not yet safe
}

template<size_t nbytes>
inline void
js::jit::RegionLock::acquire(void* addr)
{
    while (_InterlockedCompareExchange((long*)&spinlock, /*newval=*/1, /*oldval=*/0) == 1)
        continue;
}

template<size_t nbytes>
inline void
js::jit::RegionLock::release(void* addr)
{
    MOZ_ASSERT(AtomicOperations::loadSeqCst(&spinlock) == 1, "releasing unlocked region lock");
    _InterlockedExchange((long*)&spinlock, 0);
}

# undef HAVE_EXCHANGE64

#elif defined(ENABLE_SHARED_ARRAY_BUFFER)

# error "Either disable JS shared memory at compile time, use GCC, Clang, or MSVC, or add code here"

#endif // platform

#endif // jit_shared_AtomicOperations_x86_shared_h