diff options
Diffstat (limited to 'widget/gonk/libui/cutils_trace.h')
| -rw-r--r-- | widget/gonk/libui/cutils_trace.h | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/widget/gonk/libui/cutils_trace.h b/widget/gonk/libui/cutils_trace.h new file mode 100644 index 0000000000..29034cab5f --- /dev/null +++ b/widget/gonk/libui/cutils_trace.h @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2012 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _LIBS_CUTILS_TRACE_H +#define _LIBS_CUTILS_TRACE_H + +#include <sys/cdefs.h> +#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> +#include <unistd.h> +#include <cutils/compiler.h> + +#ifdef ANDROID_SMP +#include <cutils/atomic-inline.h> +#else +#include <cutils/atomic.h> +#endif + +__BEGIN_DECLS + +/** + * The ATRACE_TAG macro can be defined before including this header to trace + * using one of the tags defined below. It must be defined to one of the + * following ATRACE_TAG_* macros. The trace tag is used to filter tracing in + * userland to avoid some of the runtime cost of tracing when it is not desired. + * + * Defining ATRACE_TAG to be ATRACE_TAG_ALWAYS will result in the tracing always + * being enabled - this should ONLY be done for debug code, as userland tracing + * has a performance cost even when the trace is not being recorded. Defining + * ATRACE_TAG to be ATRACE_TAG_NEVER or leaving ATRACE_TAG undefined will result + * in the tracing always being disabled. + * + * ATRACE_TAG_HAL should be bitwise ORed with the relevant tags for tracing + * within a hardware module. For example a camera hardware module would set: + * #define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL) + * + * Keep these in sync with frameworks/base/core/java/android/os/Trace.java. + */ +#define ATRACE_TAG_NEVER 0 // This tag is never enabled. +#define ATRACE_TAG_ALWAYS (1<<0) // This tag is always enabled. +#define ATRACE_TAG_GRAPHICS (1<<1) +#define ATRACE_TAG_INPUT (1<<2) +#define ATRACE_TAG_VIEW (1<<3) +#define ATRACE_TAG_WEBVIEW (1<<4) +#define ATRACE_TAG_WINDOW_MANAGER (1<<5) +#define ATRACE_TAG_ACTIVITY_MANAGER (1<<6) +#define ATRACE_TAG_SYNC_MANAGER (1<<7) +#define ATRACE_TAG_AUDIO (1<<8) +#define ATRACE_TAG_VIDEO (1<<9) +#define ATRACE_TAG_CAMERA (1<<10) +#define ATRACE_TAG_HAL (1<<11) +#define ATRACE_TAG_APP (1<<12) +#define ATRACE_TAG_RESOURCES (1<<13) +#define ATRACE_TAG_DALVIK (1<<14) +#define ATRACE_TAG_LAST ATRACE_TAG_DALVIK + +// Reserved for initialization. +#define ATRACE_TAG_NOT_READY (1LL<<63) + +#define ATRACE_TAG_VALID_MASK ((ATRACE_TAG_LAST - 1) | ATRACE_TAG_LAST) + +#ifndef ATRACE_TAG +#define ATRACE_TAG ATRACE_TAG_NEVER +#elif ATRACE_TAG > ATRACE_TAG_VALID_MASK +#error ATRACE_TAG must be defined to be one of the tags defined in cutils/trace.h +#endif + +#ifdef HAVE_ANDROID_OS +/** + * Maximum size of a message that can be logged to the trace buffer. + * Note this message includes a tag, the pid, and the string given as the name. + * Names should be kept short to get the most use of the trace buffer. + */ +#define ATRACE_MESSAGE_LENGTH 1024 + +/** + * Opens the trace file for writing and reads the property for initial tags. + * The atrace.tags.enableflags property sets the tags to trace. + * This function should not be explicitly called, the first call to any normal + * trace function will cause it to be run safely. + */ +void atrace_setup(); + +/** + * If tracing is ready, set atrace_enabled_tags to the system property + * debug.atrace.tags.enableflags. Can be used as a sysprop change callback. + */ +void atrace_update_tags(); + +/** + * Set whether the process is debuggable. By default the process is not + * considered debuggable. If the process is not debuggable then application- + * level tracing is not allowed unless the ro.debuggable system property is + * set to '1'. + */ +void atrace_set_debuggable(bool debuggable); + +/** + * Set whether tracing is enabled for the current process. This is used to + * prevent tracing within the Zygote process. + */ +void atrace_set_tracing_enabled(bool enabled); + +/** + * Flag indicating whether setup has been completed, initialized to 0. + * Nonzero indicates setup has completed. + * Note: This does NOT indicate whether or not setup was successful. + */ +extern volatile int32_t atrace_is_ready; + +/** + * Set of ATRACE_TAG flags to trace for, initialized to ATRACE_TAG_NOT_READY. + * A value of zero indicates setup has failed. + * Any other nonzero value indicates setup has succeeded, and tracing is on. + */ +extern uint64_t atrace_enabled_tags; + +/** + * Handle to the kernel's trace buffer, initialized to -1. + * Any other value indicates setup has succeeded, and is a valid fd for tracing. + */ +extern int atrace_marker_fd; + +/** + * atrace_init readies the process for tracing by opening the trace_marker file. + * Calling any trace function causes this to be run, so calling it is optional. + * This can be explicitly run to avoid setup delay on first trace function. + */ +#define ATRACE_INIT() atrace_init() +static inline void atrace_init() +{ + if (CC_UNLIKELY(!android_atomic_acquire_load(&atrace_is_ready))) { + atrace_setup(); + } +} + +/** + * Get the mask of all tags currently enabled. + * It can be used as a guard condition around more expensive trace calculations. + * Every trace function calls this, which ensures atrace_init is run. + */ +#define ATRACE_GET_ENABLED_TAGS() atrace_get_enabled_tags() +static inline uint64_t atrace_get_enabled_tags() +{ + atrace_init(); + return atrace_enabled_tags; +} + +/** + * Test if a given tag is currently enabled. + * Returns nonzero if the tag is enabled, otherwise zero. + * It can be used as a guard condition around more expensive trace calculations. + */ +#define ATRACE_ENABLED() atrace_is_tag_enabled(ATRACE_TAG) +static inline uint64_t atrace_is_tag_enabled(uint64_t tag) +{ + return atrace_get_enabled_tags() & tag; +} + +/** + * Trace the beginning of a context. name is used to identify the context. + * This is often used to time function execution. + */ +#define ATRACE_BEGIN(name) atrace_begin(ATRACE_TAG, name) +static inline void atrace_begin(uint64_t tag, const char* name) +{ + if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { + char buf[ATRACE_MESSAGE_LENGTH]; + size_t len; + + len = snprintf(buf, ATRACE_MESSAGE_LENGTH, "B|%d|%s", getpid(), name); + write(atrace_marker_fd, buf, len); + } +} + +/** + * Trace the end of a context. + * This should match up (and occur after) a corresponding ATRACE_BEGIN. + */ +#define ATRACE_END() atrace_end(ATRACE_TAG) +static inline void atrace_end(uint64_t tag) +{ + if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { + char c = 'E'; + write(atrace_marker_fd, &c, 1); + } +} + +/** + * Trace the beginning of an asynchronous event. Unlike ATRACE_BEGIN/ATRACE_END + * contexts, asynchronous events do not need to be nested. The name describes + * the event, and the cookie provides a unique identifier for distinguishing + * simultaneous events. The name and cookie used to begin an event must be + * used to end it. + */ +#define ATRACE_ASYNC_BEGIN(name, cookie) \ + atrace_async_begin(ATRACE_TAG, name, cookie) +static inline void atrace_async_begin(uint64_t tag, const char* name, + int32_t cookie) +{ + if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { + char buf[ATRACE_MESSAGE_LENGTH]; + size_t len; + + len = snprintf(buf, ATRACE_MESSAGE_LENGTH, "S|%d|%s|%d", getpid(), + name, cookie); + write(atrace_marker_fd, buf, len); + } +} + +/** + * Trace the end of an asynchronous event. + * This should have a corresponding ATRACE_ASYNC_BEGIN. + */ +#define ATRACE_ASYNC_END(name, cookie) atrace_async_end(ATRACE_TAG, name, cookie) +static inline void atrace_async_end(uint64_t tag, const char* name, + int32_t cookie) +{ + if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { + char buf[ATRACE_MESSAGE_LENGTH]; + size_t len; + + len = snprintf(buf, ATRACE_MESSAGE_LENGTH, "F|%d|%s|%d", getpid(), + name, cookie); + write(atrace_marker_fd, buf, len); + } +} + + +/** + * Traces an integer counter value. name is used to identify the counter. + * This can be used to track how a value changes over time. + */ +#define ATRACE_INT(name, value) atrace_int(ATRACE_TAG, name, value) +static inline void atrace_int(uint64_t tag, const char* name, int32_t value) +{ + if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { + char buf[ATRACE_MESSAGE_LENGTH]; + size_t len; + + len = snprintf(buf, ATRACE_MESSAGE_LENGTH, "C|%d|%s|%d", + getpid(), name, value); + write(atrace_marker_fd, buf, len); + } +} + +#else // not HAVE_ANDROID_OS + +#define ATRACE_INIT() +#define ATRACE_GET_ENABLED_TAGS() +#define ATRACE_ENABLED() +#define ATRACE_BEGIN(name) +#define ATRACE_END() +#define ATRACE_ASYNC_BEGIN(name, cookie) +#define ATRACE_ASYNC_END(name, cookie) +#define ATRACE_INT(name, value) + +#endif // not HAVE_ANDROID_OS + +__END_DECLS + +#endif // _LIBS_CUTILS_TRACE_H |