diff options
Diffstat (limited to 'media/libcubeb/src/cubeb_audiounit.cpp')
| -rw-r--r-- | media/libcubeb/src/cubeb_audiounit.cpp | 2734 |
1 files changed, 2734 insertions, 0 deletions
diff --git a/media/libcubeb/src/cubeb_audiounit.cpp b/media/libcubeb/src/cubeb_audiounit.cpp new file mode 100644 index 0000000000..f24dfbff2f --- /dev/null +++ b/media/libcubeb/src/cubeb_audiounit.cpp @@ -0,0 +1,2734 @@ +/* + * Copyright © 2011 Mozilla Foundation + * + * This program is made available under an ISC-style license. See the + * accompanying file LICENSE for details. + */ +#undef NDEBUG + +#include <TargetConditionals.h> +#include <assert.h> +#include <mach/mach_time.h> +#include <pthread.h> +#include <stdlib.h> +#include <AudioUnit/AudioUnit.h> +#if !TARGET_OS_IPHONE +#include <AvailabilityMacros.h> +#include <CoreAudio/AudioHardware.h> +#include <CoreAudio/HostTime.h> +#include <CoreFoundation/CoreFoundation.h> +#endif +#include <CoreAudio/CoreAudioTypes.h> +#include <AudioToolbox/AudioToolbox.h> +#include "cubeb/cubeb.h" +#include "cubeb-internal.h" +#include "cubeb_panner.h" +#if !TARGET_OS_IPHONE +#include "cubeb_osx_run_loop.h" +#endif +#include "cubeb_resampler.h" +#include "cubeb_ring_array.h" +#include "cubeb_utils.h" +#include <algorithm> +#include <atomic> + +#if !defined(kCFCoreFoundationVersionNumber10_7) +/* From CoreFoundation CFBase.h */ +#define kCFCoreFoundationVersionNumber10_7 635.00 +#endif + +#if !TARGET_OS_IPHONE && MAC_OS_X_VERSION_MIN_REQUIRED < 1060 +#define AudioComponent Component +#define AudioComponentDescription ComponentDescription +#define AudioComponentFindNext FindNextComponent +#define AudioComponentInstanceNew OpenAComponent +#define AudioComponentInstanceDispose CloseComponent +#endif + +#if MAC_OS_X_VERSION_MIN_REQUIRED < 101000 +typedef UInt32 AudioFormatFlags; +#endif + +#define CUBEB_STREAM_MAX 8 + +#define AU_OUT_BUS 0 +#define AU_IN_BUS 1 + +#define PRINT_ERROR_CODE(str, r) do { \ + LOG("System call failed: %s (rv: %d)", str, r); \ +} while(0) + +const char * DISPATCH_QUEUE_LABEL = "org.mozilla.cubeb"; + +/* Testing empirically, some headsets report a minimal latency that is very + * low, but this does not work in practice. Lie and say the minimum is 256 + * frames. */ +const uint32_t SAFE_MIN_LATENCY_FRAMES = 256; +const uint32_t SAFE_MAX_LATENCY_FRAMES = 512; + +void audiounit_stream_stop_internal(cubeb_stream * stm); +void audiounit_stream_start_internal(cubeb_stream * stm); +static void audiounit_close_stream(cubeb_stream *stm); +static int audiounit_setup_stream(cubeb_stream *stm); + +extern cubeb_ops const audiounit_ops; + +struct cubeb { + cubeb_ops const * ops; + owned_critical_section mutex; + std::atomic<int> active_streams; + uint32_t global_latency_frames = 0; + int limit_streams; + cubeb_device_collection_changed_callback collection_changed_callback; + void * collection_changed_user_ptr; + /* Differentiate input from output devices. */ + cubeb_device_type collection_changed_devtype; + uint32_t devtype_device_count; + AudioObjectID * devtype_device_array; + // The queue is asynchronously deallocated once all references to it are released + dispatch_queue_t serial_queue = dispatch_queue_create(DISPATCH_QUEUE_LABEL, DISPATCH_QUEUE_SERIAL); +}; + +class auto_array_wrapper +{ +public: + explicit auto_array_wrapper(auto_array<float> * ar) + : float_ar(ar) + , short_ar(nullptr) + {assert((float_ar && !short_ar) || (!float_ar && short_ar));} + + explicit auto_array_wrapper(auto_array<short> * ar) + : float_ar(nullptr) + , short_ar(ar) + {assert((float_ar && !short_ar) || (!float_ar && short_ar));} + + ~auto_array_wrapper() { + auto_lock l(lock); + assert((float_ar && !short_ar) || (!float_ar && short_ar)); + delete float_ar; + delete short_ar; + } + + void push(void * elements, size_t length){ + assert((float_ar && !short_ar) || (!float_ar && short_ar)); + auto_lock l(lock); + if (float_ar) + return float_ar->push(static_cast<float*>(elements), length); + return short_ar->push(static_cast<short*>(elements), length); + } + + size_t length() { + assert((float_ar && !short_ar) || (!float_ar && short_ar)); + auto_lock l(lock); + if (float_ar) + return float_ar->length(); + return short_ar->length(); + } + + void push_silence(size_t length) { + assert((float_ar && !short_ar) || (!float_ar && short_ar)); + auto_lock l(lock); + if (float_ar) + return float_ar->push_silence(length); + return short_ar->push_silence(length); + } + + bool pop(void * elements, size_t length) { + assert((float_ar && !short_ar) || (!float_ar && short_ar)); + auto_lock l(lock); + if (float_ar) + return float_ar->pop(static_cast<float*>(elements), length); + return short_ar->pop(static_cast<short*>(elements), length); + } + + void * data() { + assert((float_ar && !short_ar) || (!float_ar && short_ar)); + auto_lock l(lock); + if (float_ar) + return float_ar->data(); + return short_ar->data(); + } + + void clear() { + assert((float_ar && !short_ar) || (!float_ar && short_ar)); + auto_lock l(lock); + if (float_ar) { + float_ar->clear(); + } else { + short_ar->clear(); + } + } + +private: + auto_array<float> * float_ar; + auto_array<short> * short_ar; + owned_critical_section lock; +}; + +struct cubeb_stream { + cubeb * context; + cubeb_data_callback data_callback; + cubeb_state_callback state_callback; + cubeb_device_changed_callback device_changed_callback; + /* Stream creation parameters */ + cubeb_stream_params input_stream_params; + cubeb_stream_params output_stream_params; + cubeb_devid input_device; + bool is_default_input; + cubeb_devid output_device; + /* User pointer of data_callback */ + void * user_ptr; + /* Format descriptions */ + AudioStreamBasicDescription input_desc; + AudioStreamBasicDescription output_desc; + /* I/O AudioUnits */ + AudioUnit input_unit; + AudioUnit output_unit; + /* I/O device sample rate */ + Float64 input_hw_rate; + Float64 output_hw_rate; + /* Expected I/O thread interleave, + * calculated from I/O hw rate. */ + int expected_output_callbacks_in_a_row; + owned_critical_section mutex; + /* Hold the input samples in every + * input callback iteration */ + auto_array_wrapper * input_linear_buffer; + /* Frames on input buffer */ + std::atomic<uint32_t> input_buffer_frames; + /* Frame counters */ + uint64_t frames_played; + uint64_t frames_queued; + std::atomic<int64_t> frames_read; + std::atomic<bool> shutdown; + std::atomic<bool> draining; + /* Latency requested by the user. */ + uint32_t latency_frames; + std::atomic<uint64_t> current_latency_frames; + uint64_t hw_latency_frames; + std::atomic<float> panning; + cubeb_resampler * resampler; + /* This is the number of output callback we got in a row. This is usually one, + * but can be two when the input and output rate are different, and more when + * a device has been plugged or unplugged, as there can be some time before + * the device is ready. */ + std::atomic<int> output_callback_in_a_row; + /* This is true if a device change callback is currently running. */ + std::atomic<bool> switching_device; + std::atomic<bool> buffer_size_change_state{ false }; +}; + +bool has_input(cubeb_stream * stm) +{ + return stm->input_stream_params.rate != 0; +} + +bool has_output(cubeb_stream * stm) +{ + return stm->output_stream_params.rate != 0; +} + +#if TARGET_OS_IPHONE +typedef UInt32 AudioDeviceID; +typedef UInt32 AudioObjectID; + +#define AudioGetCurrentHostTime mach_absolute_time + +uint64_t +AudioConvertHostTimeToNanos(uint64_t host_time) +{ + static struct mach_timebase_info timebase_info; + static bool initialized = false; + if (!initialized) { + mach_timebase_info(&timebase_info); + initialized = true; + } + + long double answer = host_time; + if (timebase_info.numer != timebase_info.denom) { + answer *= timebase_info.numer; + answer /= timebase_info.denom; + } + return (uint64_t)answer; +} +#endif + +static int64_t +audiotimestamp_to_latency(AudioTimeStamp const * tstamp, cubeb_stream * stream) +{ + if (!(tstamp->mFlags & kAudioTimeStampHostTimeValid)) { + return 0; + } + + uint64_t pres = AudioConvertHostTimeToNanos(tstamp->mHostTime); + uint64_t now = AudioConvertHostTimeToNanos(AudioGetCurrentHostTime()); + + return ((pres - now) * stream->output_desc.mSampleRate) / 1000000000LL; +} + +static void +audiounit_set_global_latency(cubeb_stream * stm, uint32_t latency_frames) +{ + stm->mutex.assert_current_thread_owns(); + assert(stm->context->active_streams == 1); + stm->context->global_latency_frames = latency_frames; +} + +static void +audiounit_make_silent(AudioBuffer * ioData) +{ + assert(ioData); + assert(ioData->mData); + memset(ioData->mData, 0, ioData->mDataByteSize); +} + +static OSStatus +audiounit_render_input(cubeb_stream * stm, + AudioUnitRenderActionFlags * flags, + AudioTimeStamp const * tstamp, + UInt32 bus, + UInt32 input_frames) +{ + /* Create the AudioBufferList to store input. */ + AudioBufferList input_buffer_list; + input_buffer_list.mBuffers[0].mDataByteSize = + stm->input_desc.mBytesPerFrame * input_frames; + input_buffer_list.mBuffers[0].mData = nullptr; + input_buffer_list.mBuffers[0].mNumberChannels = stm->input_desc.mChannelsPerFrame; + input_buffer_list.mNumberBuffers = 1; + + /* Render input samples */ + OSStatus r = AudioUnitRender(stm->input_unit, + flags, + tstamp, + bus, + input_frames, + &input_buffer_list); + + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitRender", r); + return r; + } + + /* Copy input data in linear buffer. */ + stm->input_linear_buffer->push(input_buffer_list.mBuffers[0].mData, + input_frames * stm->input_desc.mChannelsPerFrame); + + LOGV("(%p) input: buffers %d, size %d, channels %d, frames %d.", + stm, input_buffer_list.mNumberBuffers, + input_buffer_list.mBuffers[0].mDataByteSize, + input_buffer_list.mBuffers[0].mNumberChannels, + input_frames); + + /* Advance input frame counter. */ + assert(input_frames > 0); + stm->frames_read += input_frames; + + return noErr; +} + +static OSStatus +audiounit_input_callback(void * user_ptr, + AudioUnitRenderActionFlags * flags, + AudioTimeStamp const * tstamp, + UInt32 bus, + UInt32 input_frames, + AudioBufferList * /* bufs */) +{ + cubeb_stream * stm = static_cast<cubeb_stream *>(user_ptr); + long outframes; + + assert(stm->input_unit != NULL); + assert(AU_IN_BUS == bus); + + if (stm->shutdown) { + LOG("(%p) input shutdown", stm); + return noErr; + } + + // This happens when we're finally getting a new input callback after having + // switched device, we can clear the input buffer now, only keeping the data + // we just got. + if (stm->output_callback_in_a_row > stm->expected_output_callbacks_in_a_row) { + stm->input_linear_buffer->pop( + nullptr, + stm->input_linear_buffer->length() - + input_frames * stm->input_stream_params.channels); + } + + OSStatus r = audiounit_render_input(stm, flags, tstamp, bus, input_frames); + if (r != noErr) { + return r; + } + + // Full Duplex. We'll call data_callback in the AudioUnit output callback. + if (stm->output_unit != NULL) { + stm->output_callback_in_a_row = 0; + return noErr; + } + + /* Input only. Call the user callback through resampler. + Resampler will deliver input buffer in the correct rate. */ + assert(input_frames <= stm->input_linear_buffer->length() / stm->input_desc.mChannelsPerFrame); + long total_input_frames = stm->input_linear_buffer->length() / stm->input_desc.mChannelsPerFrame; + outframes = cubeb_resampler_fill(stm->resampler, + stm->input_linear_buffer->data(), + &total_input_frames, + NULL, + 0); + // Reset input buffer + stm->input_linear_buffer->clear(); + + if (outframes < 0 || outframes != input_frames) { + stm->shutdown = true; + return noErr; + } + + return noErr; +} + +static bool +is_extra_input_needed(cubeb_stream * stm) +{ + /* If the output callback came first and this is a duplex stream, we need to + * fill in some additional silence in the resampler. + * Otherwise, if we had more than expected callbacks in a row, or we're currently + * switching, we add some silence as well to compensate for the fact that + * we're lacking some input data. */ + + /* If resampling is taking place after every output callback + * the input buffer expected to be empty. Any frame left over + * from resampling is stored inside the resampler available to + * be used in next iteration as needed. + * BUT when noop_resampler is operating we have left over + * frames since it does not store anything internally. */ + return stm->frames_read == 0 || + (stm->input_linear_buffer->length() == 0 && + (stm->output_callback_in_a_row > stm->expected_output_callbacks_in_a_row || + stm->switching_device)); +} + +static OSStatus +audiounit_output_callback(void * user_ptr, + AudioUnitRenderActionFlags * /* flags */, + AudioTimeStamp const * tstamp, + UInt32 bus, + UInt32 output_frames, + AudioBufferList * outBufferList) +{ + assert(AU_OUT_BUS == bus); + assert(outBufferList->mNumberBuffers == 1); + + cubeb_stream * stm = static_cast<cubeb_stream *>(user_ptr); + + stm->output_callback_in_a_row++; + + LOGV("(%p) output: buffers %d, size %d, channels %d, frames %d.", + stm, outBufferList->mNumberBuffers, + outBufferList->mBuffers[0].mDataByteSize, + outBufferList->mBuffers[0].mNumberChannels, output_frames); + + long outframes = 0, input_frames = 0; + void * output_buffer = NULL, * input_buffer = NULL; + + if (stm->shutdown) { + LOG("(%p) output shutdown.", stm); + audiounit_make_silent(&outBufferList->mBuffers[0]); + return noErr; + } + + stm->current_latency_frames = audiotimestamp_to_latency(tstamp, stm); + if (stm->draining) { + OSStatus r = AudioOutputUnitStop(stm->output_unit); + assert(r == 0); + if (stm->input_unit) { + r = AudioOutputUnitStop(stm->input_unit); + assert(r == 0); + } + stm->state_callback(stm, stm->user_ptr, CUBEB_STATE_DRAINED); + audiounit_make_silent(&outBufferList->mBuffers[0]); + return noErr; + } + /* Get output buffer. */ + output_buffer = outBufferList->mBuffers[0].mData; + /* If Full duplex get also input buffer */ + if (stm->input_unit != NULL) { + if (is_extra_input_needed(stm)) { + uint32_t min_input_frames_required = ceilf(stm->input_hw_rate / stm->output_hw_rate * + stm->input_buffer_frames); + stm->input_linear_buffer->push_silence(min_input_frames_required * stm->input_desc.mChannelsPerFrame); + LOG("(%p) %s pushed %u frames of input silence.", stm, stm->frames_read == 0 ? "Input hasn't started," : + stm->switching_device ? "Device switching," : "Drop out,", min_input_frames_required); + } + // The input buffer + input_buffer = stm->input_linear_buffer->data(); + // Number of input frames in the buffer + input_frames = stm->input_linear_buffer->length() / stm->input_desc.mChannelsPerFrame; + } + + /* Call user callback through resampler. */ + outframes = cubeb_resampler_fill(stm->resampler, + input_buffer, + input_buffer ? &input_frames : NULL, + output_buffer, + output_frames); + + if (input_buffer) { + stm->input_linear_buffer->pop(nullptr, input_frames * stm->input_desc.mChannelsPerFrame); + } + + if (outframes < 0) { + stm->shutdown = true; + return noErr; + } + + size_t outbpf = stm->output_desc.mBytesPerFrame; + stm->draining = outframes < output_frames; + stm->frames_played = stm->frames_queued; + stm->frames_queued += outframes; + + AudioFormatFlags outaff = stm->output_desc.mFormatFlags; + float panning = (stm->output_desc.mChannelsPerFrame == 2) ? + stm->panning.load(std::memory_order_relaxed) : 0.0f; + + /* Post process output samples. */ + if (stm->draining) { + /* Clear missing frames (silence) */ + memset((uint8_t*)output_buffer + outframes * outbpf, 0, (output_frames - outframes) * outbpf); + } + /* Pan stereo. */ + if (panning != 0.0f) { + if (outaff & kAudioFormatFlagIsFloat) { + cubeb_pan_stereo_buffer_float((float*)output_buffer, outframes, panning); + } else if (outaff & kAudioFormatFlagIsSignedInteger) { + cubeb_pan_stereo_buffer_int((short*)output_buffer, outframes, panning); + } + } + return noErr; +} + +extern "C" { +int +audiounit_init(cubeb ** context, char const * /* context_name */) +{ + cubeb * ctx; + + *context = NULL; + + ctx = (cubeb *)calloc(1, sizeof(cubeb)); + assert(ctx); + // Placement new to call the ctors of cubeb members. + new (ctx) cubeb(); + + ctx->ops = &audiounit_ops; + + ctx->active_streams = 0; + + ctx->limit_streams = kCFCoreFoundationVersionNumber < kCFCoreFoundationVersionNumber10_7; +#if !TARGET_OS_IPHONE + cubeb_set_coreaudio_notification_runloop(); +#endif + + *context = ctx; + + return CUBEB_OK; +} +} + +static char const * +audiounit_get_backend_id(cubeb * /* ctx */) +{ + return "audiounit"; +} + +#if !TARGET_OS_IPHONE +static int +audiounit_get_output_device_id(AudioDeviceID * device_id) +{ + UInt32 size; + OSStatus r; + AudioObjectPropertyAddress output_device_address = { + kAudioHardwarePropertyDefaultOutputDevice, + kAudioObjectPropertyScopeGlobal, + kAudioObjectPropertyElementMaster + }; + + size = sizeof(*device_id); + + r = AudioObjectGetPropertyData(kAudioObjectSystemObject, + &output_device_address, + 0, + NULL, + &size, + device_id); + if (r != noErr) { + PRINT_ERROR_CODE("output_device_id", r); + return CUBEB_ERROR; + } + + return CUBEB_OK; +} + +static int +audiounit_get_input_device_id(AudioDeviceID * device_id) +{ + UInt32 size; + OSStatus r; + AudioObjectPropertyAddress input_device_address = { + kAudioHardwarePropertyDefaultInputDevice, + kAudioObjectPropertyScopeGlobal, + kAudioObjectPropertyElementMaster + }; + + size = sizeof(*device_id); + + r = AudioObjectGetPropertyData(kAudioObjectSystemObject, + &input_device_address, + 0, + NULL, + &size, + device_id); + if (r != noErr) { + return CUBEB_ERROR; + } + + return CUBEB_OK; +} + +static int audiounit_stream_get_volume(cubeb_stream * stm, float * volume); +static int audiounit_stream_set_volume(cubeb_stream * stm, float volume); +static int audiounit_uninstall_device_changed_callback(cubeb_stream * stm); + +static int +audiounit_reinit_stream(cubeb_stream * stm) +{ + auto_lock context_lock(stm->context->mutex); + if (!stm->shutdown) { + audiounit_stream_stop_internal(stm); + } + + int r = audiounit_uninstall_device_changed_callback(stm); + if (r != CUBEB_OK) { + LOG("(%p) Could not uninstall the device changed callback", stm); + } + + { + auto_lock lock(stm->mutex); + float volume = 0.0; + int vol_rv = audiounit_stream_get_volume(stm, &volume); + + audiounit_close_stream(stm); + + if (audiounit_setup_stream(stm) != CUBEB_OK) { + LOG("(%p) Stream reinit failed.", stm); + return CUBEB_ERROR; + } + + if (vol_rv == CUBEB_OK) { + audiounit_stream_set_volume(stm, volume); + } + + // Reset input frames to force new stream pre-buffer + // silence if needed, check `is_extra_input_needed()` + stm->frames_read = 0; + + // If the stream was running, start it again. + if (!stm->shutdown) { + audiounit_stream_start_internal(stm); + } + } + return CUBEB_OK; +} + +static OSStatus +audiounit_property_listener_callback(AudioObjectID /* id */, UInt32 address_count, + const AudioObjectPropertyAddress * addresses, + void * user) +{ + cubeb_stream * stm = (cubeb_stream*) user; + stm->switching_device = true; + + LOG("(%p) Audio device changed, %d events.", stm, address_count); + for (UInt32 i = 0; i < address_count; i++) { + switch(addresses[i].mSelector) { + case kAudioHardwarePropertyDefaultOutputDevice: { + LOG("Event[%d] - mSelector == kAudioHardwarePropertyDefaultOutputDevice", i); + // Allow restart to choose the new default + stm->output_device = nullptr; + } + break; + case kAudioHardwarePropertyDefaultInputDevice: { + LOG("Event[%d] - mSelector == kAudioHardwarePropertyDefaultInputDevice", i); + // Allow restart to choose the new default + stm->input_device = nullptr; + } + break; + case kAudioDevicePropertyDeviceIsAlive: { + LOG("Event[%d] - mSelector == kAudioDevicePropertyDeviceIsAlive", i); + // If this is the default input device ignore the event, + // kAudioHardwarePropertyDefaultInputDevice will take care of the switch + if (stm->is_default_input) { + LOG("It's the default input device, ignore the event"); + return noErr; + } + // Allow restart to choose the new default. Event register only for input. + stm->input_device = nullptr; + } + break; + case kAudioDevicePropertyDataSource: { + LOG("Event[%d] - mSelector == kAudioHardwarePropertyDataSource", i); + return noErr; + } + } + } + + for (UInt32 i = 0; i < address_count; i++) { + switch(addresses[i].mSelector) { + case kAudioHardwarePropertyDefaultOutputDevice: + case kAudioHardwarePropertyDefaultInputDevice: + case kAudioDevicePropertyDeviceIsAlive: + /* fall through */ + case kAudioDevicePropertyDataSource: { + auto_lock lock(stm->mutex); + if (stm->device_changed_callback) { + stm->device_changed_callback(stm->user_ptr); + } + break; + } + } + } + + // Use a new thread, through the queue, to avoid deadlock when calling + // Get/SetProperties method from inside notify callback + dispatch_async(stm->context->serial_queue, ^() { + if (audiounit_reinit_stream(stm) != CUBEB_OK) { + stm->state_callback(stm, stm->user_ptr, CUBEB_STATE_STOPPED); + LOG("(%p) Could not reopen the stream after switching.", stm); + } + stm->switching_device = false; + }); + + return noErr; +} + +OSStatus +audiounit_add_listener(cubeb_stream * stm, AudioDeviceID id, AudioObjectPropertySelector selector, + AudioObjectPropertyScope scope, AudioObjectPropertyListenerProc listener) +{ + AudioObjectPropertyAddress address = { + selector, + scope, + kAudioObjectPropertyElementMaster + }; + + return AudioObjectAddPropertyListener(id, &address, listener, stm); +} + +OSStatus +audiounit_remove_listener(cubeb_stream * stm, AudioDeviceID id, + AudioObjectPropertySelector selector, + AudioObjectPropertyScope scope, + AudioObjectPropertyListenerProc listener) +{ + AudioObjectPropertyAddress address = { + selector, + scope, + kAudioObjectPropertyElementMaster + }; + + return AudioObjectRemovePropertyListener(id, &address, listener, stm); +} + +static AudioObjectID audiounit_get_default_device_id(cubeb_device_type type); + +static int +audiounit_install_device_changed_callback(cubeb_stream * stm) +{ + OSStatus r; + + if (stm->output_unit) { + /* This event will notify us when the data source on the same device changes, + * for example when the user plugs in a normal (non-usb) headset in the + * headphone jack. */ + AudioDeviceID output_dev_id; + r = audiounit_get_output_device_id(&output_dev_id); + if (r != noErr) { + return CUBEB_ERROR; + } + + r = audiounit_add_listener(stm, output_dev_id, kAudioDevicePropertyDataSource, + kAudioDevicePropertyScopeOutput, &audiounit_property_listener_callback); + if (r != noErr) { + PRINT_ERROR_CODE("AudioObjectAddPropertyListener/output/kAudioDevicePropertyDataSource", r); + return CUBEB_ERROR; + } + } + + if (stm->input_unit) { + /* This event will notify us when the data source on the input device changes. */ + AudioDeviceID input_dev_id; + r = audiounit_get_input_device_id(&input_dev_id); + if (r != noErr) { + return CUBEB_ERROR; + } + + r = audiounit_add_listener(stm, input_dev_id, kAudioDevicePropertyDataSource, + kAudioDevicePropertyScopeInput, &audiounit_property_listener_callback); + if (r != noErr) { + PRINT_ERROR_CODE("AudioObjectAddPropertyListener/input/kAudioDevicePropertyDataSource", r); + return CUBEB_ERROR; + } + + /* Event to notify when the input is going away. */ + AudioDeviceID dev = stm->input_device ? reinterpret_cast<intptr_t>(stm->input_device) : + audiounit_get_default_device_id(CUBEB_DEVICE_TYPE_INPUT); + r = audiounit_add_listener(stm, dev, kAudioDevicePropertyDeviceIsAlive, + kAudioObjectPropertyScopeGlobal, &audiounit_property_listener_callback); + if (r != noErr) { + PRINT_ERROR_CODE("AudioObjectAddPropertyListener/input/kAudioDevicePropertyDeviceIsAlive", r); + return CUBEB_ERROR; + } + } + + return CUBEB_OK; +} + +static int +audiounit_install_system_changed_callback(cubeb_stream * stm) +{ + OSStatus r; + + if (stm->output_unit) { + /* This event will notify us when the default audio device changes, + * for example when the user plugs in a USB headset and the system chooses it + * automatically as the default, or when another device is chosen in the + * dropdown list. */ + r = audiounit_add_listener(stm, kAudioObjectSystemObject, kAudioHardwarePropertyDefaultOutputDevice, + kAudioObjectPropertyScopeGlobal, &audiounit_property_listener_callback); + if (r != noErr) { + LOG("AudioObjectAddPropertyListener/output/kAudioHardwarePropertyDefaultOutputDevice rv=%d", r); + return CUBEB_ERROR; + } + } + + if (stm->input_unit) { + /* This event will notify us when the default input device changes. */ + r = audiounit_add_listener(stm, kAudioObjectSystemObject, kAudioHardwarePropertyDefaultInputDevice, + kAudioObjectPropertyScopeGlobal, &audiounit_property_listener_callback); + if (r != noErr) { + LOG("AudioObjectAddPropertyListener/input/kAudioHardwarePropertyDefaultInputDevice rv=%d", r); + return CUBEB_ERROR; + } + } + + return CUBEB_OK; +} + +static int +audiounit_uninstall_device_changed_callback(cubeb_stream * stm) +{ + OSStatus r; + + if (stm->output_unit) { + AudioDeviceID output_dev_id; + r = audiounit_get_output_device_id(&output_dev_id); + if (r != noErr) { + return CUBEB_ERROR; + } + + r = audiounit_remove_listener(stm, output_dev_id, kAudioDevicePropertyDataSource, + kAudioDevicePropertyScopeOutput, &audiounit_property_listener_callback); + if (r != noErr) { + return CUBEB_ERROR; + } + } + + if (stm->input_unit) { + AudioDeviceID input_dev_id; + r = audiounit_get_input_device_id(&input_dev_id); + if (r != noErr) { + return CUBEB_ERROR; + } + + r = audiounit_remove_listener(stm, input_dev_id, kAudioDevicePropertyDataSource, + kAudioDevicePropertyScopeInput, &audiounit_property_listener_callback); + if (r != noErr) { + return CUBEB_ERROR; + } + } + return CUBEB_OK; +} + +static int +audiounit_uninstall_system_changed_callback(cubeb_stream * stm) +{ + OSStatus r; + + if (stm->output_unit) { + r = audiounit_remove_listener(stm, kAudioObjectSystemObject, kAudioHardwarePropertyDefaultOutputDevice, + kAudioObjectPropertyScopeGlobal, &audiounit_property_listener_callback); + if (r != noErr) { + return CUBEB_ERROR; + } + } + + if (stm->input_unit) { + r = audiounit_remove_listener(stm, kAudioObjectSystemObject, kAudioHardwarePropertyDefaultInputDevice, + kAudioObjectPropertyScopeGlobal, &audiounit_property_listener_callback); + if (r != noErr) { + return CUBEB_ERROR; + } + } + return CUBEB_OK; +} + +/* Get the acceptable buffer size (in frames) that this device can work with. */ +static int +audiounit_get_acceptable_latency_range(AudioValueRange * latency_range) +{ + UInt32 size; + OSStatus r; + AudioDeviceID output_device_id; + AudioObjectPropertyAddress output_device_buffer_size_range = { + kAudioDevicePropertyBufferFrameSizeRange, + kAudioDevicePropertyScopeOutput, + kAudioObjectPropertyElementMaster + }; + + if (audiounit_get_output_device_id(&output_device_id) != CUBEB_OK) { + LOG("Could not get default output device id."); + return CUBEB_ERROR; + } + + /* Get the buffer size range this device supports */ + size = sizeof(*latency_range); + + r = AudioObjectGetPropertyData(output_device_id, + &output_device_buffer_size_range, + 0, + NULL, + &size, + latency_range); + if (r != noErr) { + PRINT_ERROR_CODE("AudioObjectGetPropertyData/buffer size range", r); + return CUBEB_ERROR; + } + + return CUBEB_OK; +} +#endif /* !TARGET_OS_IPHONE */ + +static AudioObjectID +audiounit_get_default_device_id(cubeb_device_type type) +{ + AudioObjectPropertyAddress adr = { 0, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMaster }; + AudioDeviceID devid; + UInt32 size; + + if (type == CUBEB_DEVICE_TYPE_OUTPUT) { + adr.mSelector = kAudioHardwarePropertyDefaultOutputDevice; + } else if (type == CUBEB_DEVICE_TYPE_INPUT) { + adr.mSelector = kAudioHardwarePropertyDefaultInputDevice; + } else { + return kAudioObjectUnknown; + } + + size = sizeof(AudioDeviceID); + if (AudioObjectGetPropertyData(kAudioObjectSystemObject, &adr, 0, NULL, &size, &devid) != noErr) { + return kAudioObjectUnknown; + } + + return devid; +} + +int +audiounit_get_max_channel_count(cubeb * ctx, uint32_t * max_channels) +{ +#if TARGET_OS_IPHONE + //TODO: [[AVAudioSession sharedInstance] maximumOutputNumberOfChannels] + *max_channels = 2; +#else + UInt32 size; + OSStatus r; + AudioDeviceID output_device_id; + AudioStreamBasicDescription stream_format; + AudioObjectPropertyAddress stream_format_address = { + kAudioDevicePropertyStreamFormat, + kAudioDevicePropertyScopeOutput, + kAudioObjectPropertyElementMaster + }; + + assert(ctx && max_channels); + + if (audiounit_get_output_device_id(&output_device_id) != CUBEB_OK) { + return CUBEB_ERROR; + } + + size = sizeof(stream_format); + + r = AudioObjectGetPropertyData(output_device_id, + &stream_format_address, + 0, + NULL, + &size, + &stream_format); + if (r != noErr) { + PRINT_ERROR_CODE("AudioObjectPropertyAddress/StreamFormat", r); + return CUBEB_ERROR; + } + + *max_channels = stream_format.mChannelsPerFrame; +#endif + return CUBEB_OK; +} + +static int +audiounit_get_min_latency(cubeb * /* ctx */, + cubeb_stream_params /* params */, + uint32_t * latency_frames) +{ +#if TARGET_OS_IPHONE + //TODO: [[AVAudioSession sharedInstance] inputLatency] + return CUBEB_ERROR_NOT_SUPPORTED; +#else + AudioValueRange latency_range; + if (audiounit_get_acceptable_latency_range(&latency_range) != CUBEB_OK) { + LOG("Could not get acceptable latency range."); + return CUBEB_ERROR; + } + + *latency_frames = std::max<uint32_t>(latency_range.mMinimum, + SAFE_MIN_LATENCY_FRAMES); +#endif + + return CUBEB_OK; +} + +static int +audiounit_get_preferred_sample_rate(cubeb * /* ctx */, uint32_t * rate) +{ +#if TARGET_OS_IPHONE + //TODO + return CUBEB_ERROR_NOT_SUPPORTED; +#else + UInt32 size; + OSStatus r; + Float64 fsamplerate; + AudioDeviceID output_device_id; + AudioObjectPropertyAddress samplerate_address = { + kAudioDevicePropertyNominalSampleRate, + kAudioObjectPropertyScopeGlobal, + kAudioObjectPropertyElementMaster + }; + + if (audiounit_get_output_device_id(&output_device_id) != CUBEB_OK) { + return CUBEB_ERROR; + } + + size = sizeof(fsamplerate); + r = AudioObjectGetPropertyData(output_device_id, + &samplerate_address, + 0, + NULL, + &size, + &fsamplerate); + + if (r != noErr) { + return CUBEB_ERROR; + } + + *rate = static_cast<uint32_t>(fsamplerate); +#endif + return CUBEB_OK; +} + +static OSStatus audiounit_remove_device_listener(cubeb * context); + +static void +audiounit_destroy(cubeb * ctx) +{ + // Disabling this assert for bug 1083664 -- we seem to leak a stream + // assert(ctx->active_streams == 0); + + { + auto_lock lock(ctx->mutex); + /* Unregister the callback if necessary. */ + if(ctx->collection_changed_callback) { + audiounit_remove_device_listener(ctx); + } + } + + ctx->~cubeb(); + free(ctx); +} + +static void audiounit_stream_destroy(cubeb_stream * stm); + +static int +audio_stream_desc_init(AudioStreamBasicDescription * ss, + const cubeb_stream_params * stream_params) +{ + switch (stream_params->format) { + case CUBEB_SAMPLE_S16LE: + ss->mBitsPerChannel = 16; + ss->mFormatFlags = kAudioFormatFlagIsSignedInteger; + break; + case CUBEB_SAMPLE_S16BE: + ss->mBitsPerChannel = 16; + ss->mFormatFlags = kAudioFormatFlagIsSignedInteger | + kAudioFormatFlagIsBigEndian; + break; + case CUBEB_SAMPLE_FLOAT32LE: + ss->mBitsPerChannel = 32; + ss->mFormatFlags = kAudioFormatFlagIsFloat; + break; + case CUBEB_SAMPLE_FLOAT32BE: + ss->mBitsPerChannel = 32; + ss->mFormatFlags = kAudioFormatFlagIsFloat | + kAudioFormatFlagIsBigEndian; + break; + default: + return CUBEB_ERROR_INVALID_FORMAT; + } + + ss->mFormatID = kAudioFormatLinearPCM; + ss->mFormatFlags |= kLinearPCMFormatFlagIsPacked; + ss->mSampleRate = stream_params->rate; + ss->mChannelsPerFrame = stream_params->channels; + + ss->mBytesPerFrame = (ss->mBitsPerChannel / 8) * ss->mChannelsPerFrame; + ss->mFramesPerPacket = 1; + ss->mBytesPerPacket = ss->mBytesPerFrame * ss->mFramesPerPacket; + + ss->mReserved = 0; + + return CUBEB_OK; +} + +static int +audiounit_create_unit(AudioUnit * unit, + bool is_input, + const cubeb_stream_params * /* stream_params */, + cubeb_devid device) +{ + AudioComponentDescription desc; + AudioComponent comp; + UInt32 enable; + AudioDeviceID devid; + OSStatus rv; + + desc.componentType = kAudioUnitType_Output; +#if TARGET_OS_IPHONE + bool use_default_output = false; + desc.componentSubType = kAudioUnitSubType_RemoteIO; +#else + // Use the DefaultOutputUnit for output when no device is specified + // so we retain automatic output device switching when the default + // changes. Once we have complete support for device notifications + // and switching, we can use the AUHAL for everything. + bool use_default_output = device == NULL && !is_input; + if (use_default_output) { + desc.componentSubType = kAudioUnitSubType_DefaultOutput; + } else { + desc.componentSubType = kAudioUnitSubType_HALOutput; + } +#endif + desc.componentManufacturer = kAudioUnitManufacturer_Apple; + desc.componentFlags = 0; + desc.componentFlagsMask = 0; + comp = AudioComponentFindNext(NULL, &desc); + if (comp == NULL) { + LOG("Could not find matching audio hardware."); + return CUBEB_ERROR; + } + + rv = AudioComponentInstanceNew(comp, unit); + if (rv != noErr) { + PRINT_ERROR_CODE("AudioComponentInstanceNew", rv); + return CUBEB_ERROR; + } + + if (!use_default_output) { + enable = 1; + rv = AudioUnitSetProperty(*unit, kAudioOutputUnitProperty_EnableIO, + is_input ? kAudioUnitScope_Input : kAudioUnitScope_Output, + is_input ? AU_IN_BUS : AU_OUT_BUS, &enable, sizeof(UInt32)); + if (rv != noErr) { + PRINT_ERROR_CODE("AudioUnitSetProperty/kAudioOutputUnitProperty_EnableIO", rv); + return CUBEB_ERROR; + } + + enable = 0; + rv = AudioUnitSetProperty(*unit, kAudioOutputUnitProperty_EnableIO, + is_input ? kAudioUnitScope_Output : kAudioUnitScope_Input, + is_input ? AU_OUT_BUS : AU_IN_BUS, &enable, sizeof(UInt32)); + if (rv != noErr) { + PRINT_ERROR_CODE("AudioUnitSetProperty/kAudioOutputUnitProperty_EnableIO", rv); + return CUBEB_ERROR; + } + + if (device == NULL) { + assert(is_input); + devid = audiounit_get_default_device_id(CUBEB_DEVICE_TYPE_INPUT); + } else { + devid = reinterpret_cast<intptr_t>(device); + } + rv = AudioUnitSetProperty(*unit, kAudioOutputUnitProperty_CurrentDevice, + kAudioUnitScope_Global, + is_input ? AU_IN_BUS : AU_OUT_BUS, + &devid, sizeof(AudioDeviceID)); + if (rv != noErr) { + PRINT_ERROR_CODE("AudioUnitSetProperty/kAudioOutputUnitProperty_CurrentDevice", rv); + return CUBEB_ERROR; + } + } + + return CUBEB_OK; +} + +static int +audiounit_init_input_linear_buffer(cubeb_stream * stream, uint32_t capacity) +{ + if (stream->input_desc.mFormatFlags & kAudioFormatFlagIsSignedInteger) { + stream->input_linear_buffer = new auto_array_wrapper( + new auto_array<short>(capacity * + stream->input_buffer_frames * + stream->input_desc.mChannelsPerFrame) ); + } else { + stream->input_linear_buffer = new auto_array_wrapper( + new auto_array<float>(capacity * + stream->input_buffer_frames * + stream->input_desc.mChannelsPerFrame) ); + } + + if (!stream->input_linear_buffer) { + return CUBEB_ERROR; + } + + assert(stream->input_linear_buffer->length() == 0); + + // Pre-buffer silence if needed + if (capacity != 1) { + size_t silence_size = stream->input_buffer_frames * + stream->input_desc.mChannelsPerFrame; + stream->input_linear_buffer->push_silence(silence_size); + + assert(stream->input_linear_buffer->length() == silence_size); + } + + return CUBEB_OK; +} + +static void +audiounit_destroy_input_linear_buffer(cubeb_stream * stream) +{ + delete stream->input_linear_buffer; +} + +static uint32_t +audiounit_clamp_latency(cubeb_stream * stm, uint32_t latency_frames) +{ + // For the 1st stream set anything within safe min-max + assert(stm->context->active_streams > 0); + if (stm->context->active_streams == 1) { + return std::max(std::min<uint32_t>(latency_frames, SAFE_MAX_LATENCY_FRAMES), + SAFE_MIN_LATENCY_FRAMES); + } + + // If more than one stream operates in parallel + // allow only lower values of latency + int r; + UInt32 output_buffer_size = 0; + UInt32 size = sizeof(output_buffer_size); + if (stm->output_unit) { + r = AudioUnitGetProperty(stm->output_unit, + kAudioDevicePropertyBufferFrameSize, + kAudioUnitScope_Output, + AU_OUT_BUS, + &output_buffer_size, + &size); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitGetProperty/output/kAudioDevicePropertyBufferFrameSize", r); + return 0; + } + + output_buffer_size = std::max(std::min<uint32_t>(output_buffer_size, SAFE_MAX_LATENCY_FRAMES), + SAFE_MIN_LATENCY_FRAMES); + } + + UInt32 input_buffer_size = 0; + if (stm->input_unit) { + r = AudioUnitGetProperty(stm->input_unit, + kAudioDevicePropertyBufferFrameSize, + kAudioUnitScope_Input, + AU_IN_BUS, + &input_buffer_size, + &size); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitGetProperty/input/kAudioDevicePropertyBufferFrameSize", r); + return 0; + } + + input_buffer_size = std::max(std::min<uint32_t>(input_buffer_size, SAFE_MAX_LATENCY_FRAMES), + SAFE_MIN_LATENCY_FRAMES); + } + + // Every following active streams can only set smaller latency + UInt32 upper_latency_limit = 0; + if (input_buffer_size != 0 && output_buffer_size != 0) { + upper_latency_limit = std::min<uint32_t>(input_buffer_size, output_buffer_size); + } else if (input_buffer_size != 0) { + upper_latency_limit = input_buffer_size; + } else if (output_buffer_size != 0) { + upper_latency_limit = output_buffer_size; + } else { + upper_latency_limit = SAFE_MAX_LATENCY_FRAMES; + } + + return std::max(std::min<uint32_t>(latency_frames, upper_latency_limit), + SAFE_MIN_LATENCY_FRAMES); +} + +/* + * Change buffer size is prone to deadlock thus we change it + * following the steps: + * - register a listener for the buffer size property + * - change the property + * - wait until the listener is executed + * - property has changed, remove the listener + * */ +static void +buffer_size_changed_callback(void * inClientData, + AudioUnit inUnit, + AudioUnitPropertyID inPropertyID, + AudioUnitScope inScope, + AudioUnitElement inElement) +{ + cubeb_stream * stm = (cubeb_stream *)inClientData; + + AudioUnit au = inUnit; + AudioUnitScope au_scope = kAudioUnitScope_Input; + AudioUnitElement au_element = inElement; + const char * au_type = "output"; + + if (au == stm->input_unit) { + au_scope = kAudioUnitScope_Output; + au_type = "input"; + } + + switch (inPropertyID) { + + case kAudioDevicePropertyBufferFrameSize: { + if (inScope != au_scope) { + break; + } + UInt32 new_buffer_size; + UInt32 outSize = sizeof(UInt32); + OSStatus r = AudioUnitGetProperty(au, + kAudioDevicePropertyBufferFrameSize, + au_scope, + au_element, + &new_buffer_size, + &outSize); + if (r != noErr) { + LOG("(%p) Event: kAudioDevicePropertyBufferFrameSize: Cannot get current buffer size", stm); + } else { + LOG("(%p) Event: kAudioDevicePropertyBufferFrameSize: New %s buffer size = %d for scope %d", stm, + au_type, new_buffer_size, inScope); + } + stm->buffer_size_change_state = true; + break; + } + } +} + +enum set_buffer_size_side { + INPUT, + OUTPUT, +}; + +static int +audiounit_set_buffer_size(cubeb_stream * stm, uint32_t new_size_frames, set_buffer_size_side set_side) +{ + AudioUnit au = stm->output_unit; + AudioUnitScope au_scope = kAudioUnitScope_Input; + AudioUnitElement au_element = AU_OUT_BUS; + const char * au_type = "output"; + + if (set_side == INPUT) { + au = stm->input_unit; + au_scope = kAudioUnitScope_Output; + au_element = AU_IN_BUS; + au_type = "input"; + } + + uint32_t buffer_frames = 0; + UInt32 size = sizeof(buffer_frames); + int r = AudioUnitGetProperty(au, + kAudioDevicePropertyBufferFrameSize, + au_scope, + au_element, + &buffer_frames, + &size); + if (r != noErr) { + if (set_side == INPUT) { + PRINT_ERROR_CODE("AudioUnitGetProperty/input/kAudioDevicePropertyBufferFrameSize", r); + } else { + PRINT_ERROR_CODE("AudioUnitGetProperty/output/kAudioDevicePropertyBufferFrameSize", r); + } + return CUBEB_ERROR; + } + + if (new_size_frames == buffer_frames) { + LOG("(%p) No need to update %s buffer size already %u frames", stm, au_type, buffer_frames); + return CUBEB_OK; + } + + r = AudioUnitAddPropertyListener(au, + kAudioDevicePropertyBufferFrameSize, + buffer_size_changed_callback, + stm); + if (r != noErr) { + if (set_side == INPUT) { + PRINT_ERROR_CODE("AudioUnitAddPropertyListener/input/kAudioDevicePropertyBufferFrameSize", r); + } else { + PRINT_ERROR_CODE("AudioUnitAddPropertyListener/output/kAudioDevicePropertyBufferFrameSize", r); + } + return CUBEB_ERROR; + } + + stm->buffer_size_change_state = false; + + r = AudioUnitSetProperty(au, + kAudioDevicePropertyBufferFrameSize, + au_scope, + au_element, + &new_size_frames, + sizeof(new_size_frames)); + if (r != noErr) { + if (set_side == INPUT) { + PRINT_ERROR_CODE("AudioUnitSetProperty/input/kAudioDevicePropertyBufferFrameSize", r); + } else { + PRINT_ERROR_CODE("AudioUnitSetProperty/output/kAudioDevicePropertyBufferFrameSize", r); + } + + r = AudioUnitRemovePropertyListenerWithUserData(au, + kAudioDevicePropertyBufferFrameSize, + buffer_size_changed_callback, + stm); + if (r != noErr) { + if (set_side == INPUT) { + PRINT_ERROR_CODE("AudioUnitAddPropertyListener/input/kAudioDevicePropertyBufferFrameSize", r); + } else { + PRINT_ERROR_CODE("AudioUnitAddPropertyListener/output/kAudioDevicePropertyBufferFrameSize", r); + } + } + + return CUBEB_ERROR; + } + + int count = 0; + while (!stm->buffer_size_change_state && count++ < 30) { + struct timespec req, rem; + req.tv_sec = 0; + req.tv_nsec = 100000000L; // 0.1 sec + if (nanosleep(&req , &rem) < 0 ) { + LOG("(%p) Warning: nanosleep call failed or interrupted. Remaining time %ld nano secs \n", stm, rem.tv_nsec); + } + LOG("(%p) audiounit_set_buffer_size : wait count = %d", stm, count); + } + + r = AudioUnitRemovePropertyListenerWithUserData(au, + kAudioDevicePropertyBufferFrameSize, + buffer_size_changed_callback, + stm); + if (r != noErr) { + return CUBEB_ERROR; + if (set_side == INPUT) { + PRINT_ERROR_CODE("AudioUnitAddPropertyListener/input/kAudioDevicePropertyBufferFrameSize", r); + } else { + PRINT_ERROR_CODE("AudioUnitAddPropertyListener/output/kAudioDevicePropertyBufferFrameSize", r); + } + } + + if (!stm->buffer_size_change_state && count >= 30) { + LOG("(%p) Error, did not get buffer size change callback ...", stm); + return CUBEB_ERROR; + } + + LOG("(%p) %s buffer size changed to %u frames.", stm, au_type, new_size_frames); + return CUBEB_OK; +} + +static int +audiounit_configure_input(cubeb_stream * stm) +{ + int r = 0; + UInt32 size; + AURenderCallbackStruct aurcbs_in; + + LOG("(%p) Opening input side: rate %u, channels %u, format %d, latency in frames %u.", + stm, stm->input_stream_params.rate, stm->input_stream_params.channels, + stm->input_stream_params.format, stm->latency_frames); + + /* Get input device sample rate. */ + AudioStreamBasicDescription input_hw_desc; + size = sizeof(AudioStreamBasicDescription); + r = AudioUnitGetProperty(stm->input_unit, + kAudioUnitProperty_StreamFormat, + kAudioUnitScope_Input, + AU_IN_BUS, + &input_hw_desc, + &size); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitGetProperty/input/kAudioUnitProperty_StreamFormat", r); + return CUBEB_ERROR; + } + stm->input_hw_rate = input_hw_desc.mSampleRate; + LOG("(%p) Input device sampling rate: %.2f", stm, stm->input_hw_rate); + + /* Set format description according to the input params. */ + r = audio_stream_desc_init(&stm->input_desc, &stm->input_stream_params); + if (r != CUBEB_OK) { + LOG("(%p) Setting format description for input failed.", stm); + return r; + } + + // Use latency to set buffer size + stm->input_buffer_frames = stm->latency_frames; + r = audiounit_set_buffer_size(stm, stm->input_buffer_frames, INPUT); + if (r != CUBEB_OK) { + LOG("(%p) Error in change input buffer size.", stm); + return CUBEB_ERROR; + } + + AudioStreamBasicDescription src_desc = stm->input_desc; + /* Input AudioUnit must be configured with device's sample rate. + we will resample inside input callback. */ + src_desc.mSampleRate = stm->input_hw_rate; + + r = AudioUnitSetProperty(stm->input_unit, + kAudioUnitProperty_StreamFormat, + kAudioUnitScope_Output, + AU_IN_BUS, + &src_desc, + sizeof(AudioStreamBasicDescription)); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitSetProperty/input/kAudioUnitProperty_StreamFormat", r); + return CUBEB_ERROR; + } + + /* Frames per buffer in the input callback. */ + r = AudioUnitSetProperty(stm->input_unit, + kAudioUnitProperty_MaximumFramesPerSlice, + kAudioUnitScope_Global, + AU_IN_BUS, + &stm->input_buffer_frames, + sizeof(UInt32)); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitSetProperty/input/kAudioUnitProperty_MaximumFramesPerSlice", r); + return CUBEB_ERROR; + } + + // Input only capacity + unsigned int array_capacity = 1; + if (has_output(stm)) { + // Full-duplex increase capacity + array_capacity = 8; + } + if (audiounit_init_input_linear_buffer(stm, array_capacity) != CUBEB_OK) { + return CUBEB_ERROR; + } + + assert(stm->input_unit != NULL); + aurcbs_in.inputProc = audiounit_input_callback; + aurcbs_in.inputProcRefCon = stm; + + r = AudioUnitSetProperty(stm->input_unit, + kAudioOutputUnitProperty_SetInputCallback, + kAudioUnitScope_Global, + AU_OUT_BUS, + &aurcbs_in, + sizeof(aurcbs_in)); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitSetProperty/input/kAudioOutputUnitProperty_SetInputCallback", r); + return CUBEB_ERROR; + } + LOG("(%p) Input audiounit init successfully.", stm); + + return CUBEB_OK; +} + +static int +audiounit_configure_output(cubeb_stream * stm) +{ + int r; + AURenderCallbackStruct aurcbs_out; + UInt32 size; + + + LOG("(%p) Opening output side: rate %u, channels %u, format %d, latency in frames %u.", + stm, stm->output_stream_params.rate, stm->output_stream_params.channels, + stm->output_stream_params.format, stm->latency_frames); + + r = audio_stream_desc_init(&stm->output_desc, &stm->output_stream_params); + if (r != CUBEB_OK) { + LOG("(%p) Could not initialize the audio stream description.", stm); + return r; + } + + /* Get output device sample rate. */ + AudioStreamBasicDescription output_hw_desc; + size = sizeof(AudioStreamBasicDescription); + memset(&output_hw_desc, 0, size); + r = AudioUnitGetProperty(stm->output_unit, + kAudioUnitProperty_StreamFormat, + kAudioUnitScope_Output, + AU_OUT_BUS, + &output_hw_desc, + &size); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitGetProperty/output/tkAudioUnitProperty_StreamFormat", r); + return CUBEB_ERROR; + } + stm->output_hw_rate = output_hw_desc.mSampleRate; + LOG("(%p) Output device sampling rate: %.2f", stm, output_hw_desc.mSampleRate); + + r = AudioUnitSetProperty(stm->output_unit, + kAudioUnitProperty_StreamFormat, + kAudioUnitScope_Input, + AU_OUT_BUS, + &stm->output_desc, + sizeof(AudioStreamBasicDescription)); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitSetProperty/output/kAudioUnitProperty_StreamFormat", r); + return CUBEB_ERROR; + } + + r = audiounit_set_buffer_size(stm, stm->latency_frames, OUTPUT); + if (r != CUBEB_OK) { + LOG("(%p) Error in change output buffer size.", stm); + return CUBEB_ERROR; + } + + /* Frames per buffer in the input callback. */ + r = AudioUnitSetProperty(stm->output_unit, + kAudioUnitProperty_MaximumFramesPerSlice, + kAudioUnitScope_Global, + AU_OUT_BUS, + &stm->latency_frames, + sizeof(UInt32)); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitSetProperty/output/kAudioUnitProperty_MaximumFramesPerSlice", r); + return CUBEB_ERROR; + } + + assert(stm->output_unit != NULL); + aurcbs_out.inputProc = audiounit_output_callback; + aurcbs_out.inputProcRefCon = stm; + r = AudioUnitSetProperty(stm->output_unit, + kAudioUnitProperty_SetRenderCallback, + kAudioUnitScope_Global, + AU_OUT_BUS, + &aurcbs_out, + sizeof(aurcbs_out)); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitSetProperty/output/kAudioUnitProperty_SetRenderCallback", r); + return CUBEB_ERROR; + } + + LOG("(%p) Output audiounit init successfully.", stm); + return CUBEB_OK; +} + +static int +audiounit_setup_stream(cubeb_stream * stm) +{ + stm->mutex.assert_current_thread_owns(); + + int r = 0; + if (has_input(stm)) { + r = audiounit_create_unit(&stm->input_unit, true, + &stm->input_stream_params, + stm->input_device); + if (r != CUBEB_OK) { + LOG("(%p) AudioUnit creation for input failed.", stm); + return r; + } + } + + if (has_output(stm)) { + r = audiounit_create_unit(&stm->output_unit, false, + &stm->output_stream_params, + stm->output_device); + if (r != CUBEB_OK) { + LOG("(%p) AudioUnit creation for output failed.", stm); + return r; + } + } + + /* Latency cannot change if another stream is operating in parallel. In this case + * latecy is set to the other stream value. */ + if (stm->context->active_streams > 1) { + LOG("(%p) More than one active stream, use global latency.", stm); + stm->latency_frames = stm->context->global_latency_frames; + } else { + /* Silently clamp the latency down to the platform default, because we + * synthetize the clock from the callbacks, and we want the clock to update + * often. */ + stm->latency_frames = audiounit_clamp_latency(stm, stm->latency_frames); + assert(stm->latency_frames); // Ungly error check + audiounit_set_global_latency(stm, stm->latency_frames); + } + + /* Setup Input Stream! */ + if (has_input(stm)) { + r = audiounit_configure_input(stm); + if (r != CUBEB_OK) { + LOG("(%p) Configure audiounit input failed.", stm); + return r; + } + } + + /* Setup Output Stream! */ + if (has_output(stm)) { + r = audiounit_configure_output(stm); + if (r != CUBEB_OK) { + LOG("(%p) Configure audiounit output failed.", stm); + return r; + } + } + + // Setting the latency doesn't work well for USB headsets (eg. plantronics). + // Keep the default latency for now. +#if 0 + buffer_size = latency; + + /* Get the range of latency this particular device can work with, and clamp + * the requested latency to this acceptable range. */ +#if !TARGET_OS_IPHONE + if (audiounit_get_acceptable_latency_range(&latency_range) != CUBEB_OK) { + return CUBEB_ERROR; + } + + if (buffer_size < (unsigned int) latency_range.mMinimum) { + buffer_size = (unsigned int) latency_range.mMinimum; + } else if (buffer_size > (unsigned int) latency_range.mMaximum) { + buffer_size = (unsigned int) latency_range.mMaximum; + } + + /** + * Get the default buffer size. If our latency request is below the default, + * set it. Otherwise, use the default latency. + **/ + size = sizeof(default_buffer_size); + if (AudioUnitGetProperty(stm->output_unit, kAudioDevicePropertyBufferFrameSize, + kAudioUnitScope_Output, 0, &default_buffer_size, &size) != 0) { + return CUBEB_ERROR; + } + + if (buffer_size < default_buffer_size) { + /* Set the maximum number of frame that the render callback will ask for, + * effectively setting the latency of the stream. This is process-wide. */ + if (AudioUnitSetProperty(stm->output_unit, kAudioDevicePropertyBufferFrameSize, + kAudioUnitScope_Output, 0, &buffer_size, sizeof(buffer_size)) != 0) { + return CUBEB_ERROR; + } + } +#else // TARGET_OS_IPHONE + //TODO: [[AVAudioSession sharedInstance] inputLatency] + // http://stackoverflow.com/questions/13157523/kaudiodevicepropertybufferframesize-replacement-for-ios +#endif +#endif + + /* We use a resampler because input AudioUnit operates + * reliable only in the capture device sample rate. + * Resampler will convert it to the user sample rate + * and deliver it to the callback. */ + uint32_t target_sample_rate; + if (has_input(stm)) { + target_sample_rate = stm->input_stream_params.rate; + } else { + assert(has_output(stm)); + target_sample_rate = stm->output_stream_params.rate; + } + + cubeb_stream_params input_unconverted_params; + if (has_input(stm)) { + input_unconverted_params = stm->input_stream_params; + /* Use the rate of the input device. */ + input_unconverted_params.rate = stm->input_hw_rate; + } + + /* Create resampler. Output params are unchanged + * because we do not need conversion on the output. */ + stm->resampler = cubeb_resampler_create(stm, + has_input(stm) ? &input_unconverted_params : NULL, + has_output(stm) ? &stm->output_stream_params : NULL, + target_sample_rate, + stm->data_callback, + stm->user_ptr, + CUBEB_RESAMPLER_QUALITY_DESKTOP); + if (!stm->resampler) { + LOG("(%p) Could not create resampler.", stm); + return CUBEB_ERROR; + } + + if (stm->input_unit != NULL) { + r = AudioUnitInitialize(stm->input_unit); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitInitialize/input", r); + return CUBEB_ERROR; + } + } + + if (stm->output_unit != NULL) { + r = AudioUnitInitialize(stm->output_unit); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitInitialize/output", r); + return CUBEB_ERROR; + } + } + + if (stm->input_unit && stm->output_unit) { + // According to the I/O hardware rate it is expected a specific pattern of callbacks + // for example is input is 44100 and output is 48000 we expected no more than 2 + // out callback in a row. + stm->expected_output_callbacks_in_a_row = ceilf(stm->output_hw_rate / stm->input_hw_rate); + } + + r = audiounit_install_device_changed_callback(stm); + if (r != CUBEB_OK) { + LOG("(%p) Could not install the device change callback.", stm); + return r; + } + + return CUBEB_OK; +} + +static int +audiounit_stream_init(cubeb * context, + cubeb_stream ** stream, + char const * /* stream_name */, + cubeb_devid input_device, + cubeb_stream_params * input_stream_params, + cubeb_devid output_device, + cubeb_stream_params * output_stream_params, + unsigned int latency_frames, + cubeb_data_callback data_callback, + cubeb_state_callback state_callback, + void * user_ptr) +{ + cubeb_stream * stm; + int r; + + assert(context); + *stream = NULL; + + assert(latency_frames > 0); + if (context->limit_streams && context->active_streams >= CUBEB_STREAM_MAX) { + LOG("Reached the stream limit of %d", CUBEB_STREAM_MAX); + return CUBEB_ERROR; + } + + stm = (cubeb_stream *) calloc(1, sizeof(cubeb_stream)); + assert(stm); + // Placement new to call the ctors of cubeb_stream members. + new (stm) cubeb_stream(); + + /* These could be different in the future if we have both + * full-duplex stream and different devices for input vs output. */ + stm->context = context; + stm->data_callback = data_callback; + stm->state_callback = state_callback; + stm->user_ptr = user_ptr; + stm->latency_frames = latency_frames; + stm->device_changed_callback = NULL; + if (input_stream_params) { + stm->input_stream_params = *input_stream_params; + stm->input_device = input_device; + stm->is_default_input = input_device == nullptr || + (audiounit_get_default_device_id(CUBEB_DEVICE_TYPE_INPUT) == + reinterpret_cast<intptr_t>(input_device)); + } + if (output_stream_params) { + stm->output_stream_params = *output_stream_params; + stm->output_device = output_device; + } + + /* Init data members where necessary */ + stm->hw_latency_frames = UINT64_MAX; + + stm->switching_device = false; + + auto_lock context_lock(context->mutex); + { + // It's not critical to lock here, because no other thread has been started + // yet, but it allows to assert that the lock has been taken in + // `audiounit_setup_stream`. + context->active_streams += 1; + auto_lock lock(stm->mutex); + r = audiounit_setup_stream(stm); + } + + if (r != CUBEB_OK) { + LOG("(%p) Could not setup the audiounit stream.", stm); + audiounit_stream_destroy(stm); + return r; + } + + r = audiounit_install_system_changed_callback(stm); + if (r != CUBEB_OK) { + LOG("(%p) Could not install the device change callback.", stm); + return r; + } + + *stream = stm; + LOG("Cubeb stream (%p) init successful.", stm); + return CUBEB_OK; +} + +static void +audiounit_close_stream(cubeb_stream *stm) +{ + stm->mutex.assert_current_thread_owns(); + + if (stm->input_unit) { + AudioUnitUninitialize(stm->input_unit); + AudioComponentInstanceDispose(stm->input_unit); + } + + audiounit_destroy_input_linear_buffer(stm); + + if (stm->output_unit) { + AudioUnitUninitialize(stm->output_unit); + AudioComponentInstanceDispose(stm->output_unit); + } + + cubeb_resampler_destroy(stm->resampler); +} + +static void +audiounit_stream_destroy(cubeb_stream * stm) +{ + stm->shutdown = true; + + int r = audiounit_uninstall_system_changed_callback(stm); + if (r != CUBEB_OK) { + LOG("(%p) Could not uninstall the device changed callback", stm); + } + + r = audiounit_uninstall_device_changed_callback(stm); + if (r != CUBEB_OK) { + LOG("(%p) Could not uninstall the device changed callback", stm); + } + + auto_lock context_lock(stm->context->mutex); + audiounit_stream_stop_internal(stm); + + // Execute close in serial queue to avoid collision + // with reinit when un/plug devices + dispatch_sync(stm->context->serial_queue, ^() { + auto_lock lock(stm->mutex); + audiounit_close_stream(stm); + }); + + assert(stm->context->active_streams >= 1); + stm->context->active_streams -= 1; + + LOG("Cubeb stream (%p) destroyed successful.", stm); + + stm->~cubeb_stream(); + free(stm); +} + +void +audiounit_stream_start_internal(cubeb_stream * stm) +{ + OSStatus r; + if (stm->input_unit != NULL) { + r = AudioOutputUnitStart(stm->input_unit); + assert(r == 0); + } + if (stm->output_unit != NULL) { + r = AudioOutputUnitStart(stm->output_unit); + assert(r == 0); + } +} + +static int +audiounit_stream_start(cubeb_stream * stm) +{ + auto_lock context_lock(stm->context->mutex); + stm->shutdown = false; + stm->draining = false; + + audiounit_stream_start_internal(stm); + + stm->state_callback(stm, stm->user_ptr, CUBEB_STATE_STARTED); + + LOG("Cubeb stream (%p) started successfully.", stm); + return CUBEB_OK; +} + +void +audiounit_stream_stop_internal(cubeb_stream * stm) +{ + OSStatus r; + if (stm->input_unit != NULL) { + r = AudioOutputUnitStop(stm->input_unit); + assert(r == 0); + } + if (stm->output_unit != NULL) { + r = AudioOutputUnitStop(stm->output_unit); + assert(r == 0); + } +} + +static int +audiounit_stream_stop(cubeb_stream * stm) +{ + auto_lock context_lock(stm->context->mutex); + stm->shutdown = true; + + audiounit_stream_stop_internal(stm); + + stm->state_callback(stm, stm->user_ptr, CUBEB_STATE_STOPPED); + + LOG("Cubeb stream (%p) stopped successfully.", stm); + return CUBEB_OK; +} + +static int +audiounit_stream_get_position(cubeb_stream * stm, uint64_t * position) +{ + auto_lock lock(stm->mutex); + + *position = stm->frames_played; + return CUBEB_OK; +} + +int +audiounit_stream_get_latency(cubeb_stream * stm, uint32_t * latency) +{ +#if TARGET_OS_IPHONE + //TODO + return CUBEB_ERROR_NOT_SUPPORTED; +#else + auto_lock lock(stm->mutex); + if (stm->hw_latency_frames == UINT64_MAX) { + UInt32 size; + uint32_t device_latency_frames, device_safety_offset; + double unit_latency_sec; + AudioDeviceID output_device_id; + OSStatus r; + AudioObjectPropertyAddress latency_address = { + kAudioDevicePropertyLatency, + kAudioDevicePropertyScopeOutput, + kAudioObjectPropertyElementMaster + }; + AudioObjectPropertyAddress safety_offset_address = { + kAudioDevicePropertySafetyOffset, + kAudioDevicePropertyScopeOutput, + kAudioObjectPropertyElementMaster + }; + + r = audiounit_get_output_device_id(&output_device_id); + if (r != noErr) { + return CUBEB_ERROR; + } + + size = sizeof(unit_latency_sec); + r = AudioUnitGetProperty(stm->output_unit, + kAudioUnitProperty_Latency, + kAudioUnitScope_Global, + 0, + &unit_latency_sec, + &size); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitGetProperty/kAudioUnitProperty_Latency", r); + return CUBEB_ERROR; + } + + size = sizeof(device_latency_frames); + r = AudioObjectGetPropertyData(output_device_id, + &latency_address, + 0, + NULL, + &size, + &device_latency_frames); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitGetPropertyData/latency_frames", r); + return CUBEB_ERROR; + } + + size = sizeof(device_safety_offset); + r = AudioObjectGetPropertyData(output_device_id, + &safety_offset_address, + 0, + NULL, + &size, + &device_safety_offset); + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitGetPropertyData/safety_offset", r); + return CUBEB_ERROR; + } + + /* This part is fixed and depend on the stream parameter and the hardware. */ + stm->hw_latency_frames = + static_cast<uint32_t>(unit_latency_sec * stm->output_desc.mSampleRate) + + device_latency_frames + + device_safety_offset; + } + + *latency = stm->hw_latency_frames + stm->current_latency_frames; + + return CUBEB_OK; +#endif +} + +static int +audiounit_stream_get_volume(cubeb_stream * stm, float * volume) +{ + assert(stm->output_unit); + OSStatus r = AudioUnitGetParameter(stm->output_unit, + kHALOutputParam_Volume, + kAudioUnitScope_Global, + 0, volume); + if (r != noErr) { + LOG("AudioUnitGetParameter/kHALOutputParam_Volume rv=%d", r); + return CUBEB_ERROR; + } + return CUBEB_OK; +} + +int audiounit_stream_set_volume(cubeb_stream * stm, float volume) +{ + OSStatus r; + + r = AudioUnitSetParameter(stm->output_unit, + kHALOutputParam_Volume, + kAudioUnitScope_Global, + 0, volume, 0); + + if (r != noErr) { + PRINT_ERROR_CODE("AudioUnitSetParameter/kHALOutputParam_Volume", r); + return CUBEB_ERROR; + } + return CUBEB_OK; +} + +int audiounit_stream_set_panning(cubeb_stream * stm, float panning) +{ + if (stm->output_desc.mChannelsPerFrame > 2) { + return CUBEB_ERROR_INVALID_PARAMETER; + } + + stm->panning.store(panning, std::memory_order_relaxed); + return CUBEB_OK; +} + +int audiounit_stream_get_current_device(cubeb_stream * stm, + cubeb_device ** const device) +{ +#if TARGET_OS_IPHONE + //TODO + return CUBEB_ERROR_NOT_SUPPORTED; +#else + OSStatus r; + UInt32 size; + UInt32 data; + char strdata[4]; + AudioDeviceID output_device_id; + AudioDeviceID input_device_id; + + AudioObjectPropertyAddress datasource_address = { + kAudioDevicePropertyDataSource, + kAudioDevicePropertyScopeOutput, + kAudioObjectPropertyElementMaster + }; + + AudioObjectPropertyAddress datasource_address_input = { + kAudioDevicePropertyDataSource, + kAudioDevicePropertyScopeInput, + kAudioObjectPropertyElementMaster + }; + + *device = NULL; + + if (audiounit_get_output_device_id(&output_device_id) != CUBEB_OK) { + return CUBEB_ERROR; + } + + *device = new cubeb_device; + if (!*device) { + return CUBEB_ERROR; + } + PodZero(*device, 1); + + size = sizeof(UInt32); + /* This fails with some USB headset, so simply return an empty string. */ + r = AudioObjectGetPropertyData(output_device_id, + &datasource_address, + 0, NULL, &size, &data); + if (r != noErr) { + size = 0; + data = 0; + } + + (*device)->output_name = new char[size + 1]; + if (!(*device)->output_name) { + return CUBEB_ERROR; + } + + // Turn the four chars packed into a uint32 into a string + strdata[0] = (char)(data >> 24); + strdata[1] = (char)(data >> 16); + strdata[2] = (char)(data >> 8); + strdata[3] = (char)(data); + + memcpy((*device)->output_name, strdata, size); + (*device)->output_name[size] = '\0'; + + if (audiounit_get_input_device_id(&input_device_id) != CUBEB_OK) { + return CUBEB_ERROR; + } + + size = sizeof(UInt32); + r = AudioObjectGetPropertyData(input_device_id, &datasource_address_input, 0, NULL, &size, &data); + if (r != noErr) { + LOG("(%p) Error when getting device !", stm); + size = 0; + data = 0; + } + + (*device)->input_name = new char[size + 1]; + if (!(*device)->input_name) { + return CUBEB_ERROR; + } + + // Turn the four chars packed into a uint32 into a string + strdata[0] = (char)(data >> 24); + strdata[1] = (char)(data >> 16); + strdata[2] = (char)(data >> 8); + strdata[3] = (char)(data); + + memcpy((*device)->input_name, strdata, size); + (*device)->input_name[size] = '\0'; + + return CUBEB_OK; +#endif +} + +int audiounit_stream_device_destroy(cubeb_stream * /* stream */, + cubeb_device * device) +{ + delete [] device->output_name; + delete [] device->input_name; + delete device; + return CUBEB_OK; +} + +int audiounit_stream_register_device_changed_callback(cubeb_stream * stream, + cubeb_device_changed_callback device_changed_callback) +{ + /* Note: second register without unregister first causes 'nope' error. + * Current implementation requires unregister before register a new cb. */ + assert(!stream->device_changed_callback); + + auto_lock lock(stream->mutex); + + stream->device_changed_callback = device_changed_callback; + + return CUBEB_OK; +} + +static OSStatus +audiounit_get_devices(AudioObjectID ** devices, uint32_t * count) +{ + OSStatus ret; + UInt32 size = 0; + AudioObjectPropertyAddress adr = { kAudioHardwarePropertyDevices, + kAudioObjectPropertyScopeGlobal, + kAudioObjectPropertyElementMaster }; + + ret = AudioObjectGetPropertyDataSize(kAudioObjectSystemObject, &adr, 0, NULL, &size); + if (ret != noErr) { + return ret; + } + + *count = static_cast<uint32_t>(size / sizeof(AudioObjectID)); + if (size >= sizeof(AudioObjectID)) { + if (*devices != NULL) { + delete [] (*devices); + } + *devices = new AudioObjectID[*count]; + PodZero(*devices, *count); + + ret = AudioObjectGetPropertyData(kAudioObjectSystemObject, &adr, 0, NULL, &size, (void *)*devices); + if (ret != noErr) { + delete [] (*devices); + *devices = NULL; + } + } else { + *devices = NULL; + ret = -1; + } + + return ret; +} + +static char * +audiounit_strref_to_cstr_utf8(CFStringRef strref) +{ + CFIndex len, size; + char * ret; + if (strref == NULL) { + return NULL; + } + + len = CFStringGetLength(strref); + size = CFStringGetMaximumSizeForEncoding(len, kCFStringEncodingUTF8); + ret = static_cast<char *>(malloc(size)); + + if (!CFStringGetCString(strref, ret, size, kCFStringEncodingUTF8)) { + free(ret); + ret = NULL; + } + + return ret; +} + +static uint32_t +audiounit_get_channel_count(AudioObjectID devid, AudioObjectPropertyScope scope) +{ + AudioObjectPropertyAddress adr = { 0, scope, kAudioObjectPropertyElementMaster }; + UInt32 size = 0; + uint32_t i, ret = 0; + + adr.mSelector = kAudioDevicePropertyStreamConfiguration; + + if (AudioObjectGetPropertyDataSize(devid, &adr, 0, NULL, &size) == noErr && size > 0) { + AudioBufferList * list = static_cast<AudioBufferList *>(alloca(size)); + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, list) == noErr) { + for (i = 0; i < list->mNumberBuffers; i++) + ret += list->mBuffers[i].mNumberChannels; + } + } + + return ret; +} + +static void +audiounit_get_available_samplerate(AudioObjectID devid, AudioObjectPropertyScope scope, + uint32_t * min, uint32_t * max, uint32_t * def) +{ + AudioObjectPropertyAddress adr = { 0, scope, kAudioObjectPropertyElementMaster }; + + adr.mSelector = kAudioDevicePropertyNominalSampleRate; + if (AudioObjectHasProperty(devid, &adr)) { + UInt32 size = sizeof(Float64); + Float64 fvalue = 0.0; + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, &fvalue) == noErr) { + *def = fvalue; + } + } + + adr.mSelector = kAudioDevicePropertyAvailableNominalSampleRates; + UInt32 size = 0; + AudioValueRange range; + if (AudioObjectHasProperty(devid, &adr) && + AudioObjectGetPropertyDataSize(devid, &adr, 0, NULL, &size) == noErr) { + uint32_t i, count = size / sizeof(AudioValueRange); + AudioValueRange * ranges = new AudioValueRange[count]; + range.mMinimum = 9999999999.0; + range.mMaximum = 0.0; + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, ranges) == noErr) { + for (i = 0; i < count; i++) { + if (ranges[i].mMaximum > range.mMaximum) + range.mMaximum = ranges[i].mMaximum; + if (ranges[i].mMinimum < range.mMinimum) + range.mMinimum = ranges[i].mMinimum; + } + } + delete [] ranges; + *max = static_cast<uint32_t>(range.mMaximum); + *min = static_cast<uint32_t>(range.mMinimum); + } else { + *min = *max = 0; + } + +} + +static UInt32 +audiounit_get_device_presentation_latency(AudioObjectID devid, AudioObjectPropertyScope scope) +{ + AudioObjectPropertyAddress adr = { 0, scope, kAudioObjectPropertyElementMaster }; + UInt32 size, dev, stream = 0, offset; + AudioStreamID sid[1]; + + adr.mSelector = kAudioDevicePropertyLatency; + size = sizeof(UInt32); + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, &dev) != noErr) { + dev = 0; + } + + adr.mSelector = kAudioDevicePropertyStreams; + size = sizeof(sid); + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, sid) == noErr) { + adr.mSelector = kAudioStreamPropertyLatency; + size = sizeof(UInt32); + AudioObjectGetPropertyData(sid[0], &adr, 0, NULL, &size, &stream); + } + + adr.mSelector = kAudioDevicePropertySafetyOffset; + size = sizeof(UInt32); + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, &offset) != noErr) { + offset = 0; + } + + return dev + stream + offset; +} + +static cubeb_device_info * +audiounit_create_device_from_hwdev(AudioObjectID devid, cubeb_device_type type) +{ + AudioObjectPropertyAddress adr = { 0, 0, kAudioObjectPropertyElementMaster }; + UInt32 size, ch, latency; + cubeb_device_info * ret; + CFStringRef str = NULL; + AudioValueRange range; + + if (type == CUBEB_DEVICE_TYPE_OUTPUT) { + adr.mScope = kAudioDevicePropertyScopeOutput; + } else if (type == CUBEB_DEVICE_TYPE_INPUT) { + adr.mScope = kAudioDevicePropertyScopeInput; + } else { + return NULL; + } + + ch = audiounit_get_channel_count(devid, adr.mScope); + if (ch == 0) { + return NULL; + } + + ret = new cubeb_device_info; + PodZero(ret, 1); + + size = sizeof(CFStringRef); + adr.mSelector = kAudioDevicePropertyDeviceUID; + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, &str) == noErr && str != NULL) { + ret->device_id = audiounit_strref_to_cstr_utf8(str); + ret->devid = (cubeb_devid)(size_t)devid; + ret->group_id = strdup(ret->device_id); + CFRelease(str); + } + + size = sizeof(CFStringRef); + adr.mSelector = kAudioObjectPropertyName; + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, &str) == noErr && str != NULL) { + UInt32 ds; + size = sizeof(UInt32); + adr.mSelector = kAudioDevicePropertyDataSource; + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, &ds) == noErr) { + CFStringRef dsname; + AudioValueTranslation trl = { &ds, sizeof(ds), &dsname, sizeof(dsname) }; + adr.mSelector = kAudioDevicePropertyDataSourceNameForIDCFString; + size = sizeof(AudioValueTranslation); + // If there is a datasource for this device, use it instead of the device + // name. + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, &trl) == noErr) { + CFRelease(str); + str = dsname; + } + } + + ret->friendly_name = audiounit_strref_to_cstr_utf8(str); + CFRelease(str); + } + + size = sizeof(CFStringRef); + adr.mSelector = kAudioObjectPropertyManufacturer; + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, &str) == noErr && str != NULL) { + ret->vendor_name = audiounit_strref_to_cstr_utf8(str); + CFRelease(str); + } + + ret->type = type; + ret->state = CUBEB_DEVICE_STATE_ENABLED; + ret->preferred = (devid == audiounit_get_default_device_id(type)) ? + CUBEB_DEVICE_PREF_ALL : CUBEB_DEVICE_PREF_NONE; + + ret->max_channels = ch; + ret->format = (cubeb_device_fmt)CUBEB_DEVICE_FMT_ALL; /* CoreAudio supports All! */ + /* kAudioFormatFlagsAudioUnitCanonical is deprecated, prefer floating point */ + ret->default_format = CUBEB_DEVICE_FMT_F32NE; + audiounit_get_available_samplerate(devid, adr.mScope, + &ret->min_rate, &ret->max_rate, &ret->default_rate); + + latency = audiounit_get_device_presentation_latency(devid, adr.mScope); + + adr.mSelector = kAudioDevicePropertyBufferFrameSizeRange; + size = sizeof(AudioValueRange); + if (AudioObjectGetPropertyData(devid, &adr, 0, NULL, &size, &range) == noErr) { + ret->latency_lo = latency + range.mMinimum; + ret->latency_hi = latency + range.mMaximum; + } else { + ret->latency_lo = 10 * ret->default_rate / 1000; /* Default to 10ms */ + ret->latency_hi = 100 * ret->default_rate / 1000; /* Default to 100ms */ + } + + return ret; +} + +static int +audiounit_enumerate_devices(cubeb * /* context */, cubeb_device_type type, + cubeb_device_collection ** collection) +{ + AudioObjectID * hwdevs = NULL; + uint32_t i, hwdevcount = 0; + OSStatus err; + + if ((err = audiounit_get_devices(&hwdevs, &hwdevcount)) != noErr) { + return CUBEB_ERROR; + } + + *collection = static_cast<cubeb_device_collection *>(malloc(sizeof(cubeb_device_collection) + + sizeof(cubeb_device_info*) * (hwdevcount > 0 ? hwdevcount - 1 : 0))); + (*collection)->count = 0; + + if (hwdevcount > 0) { + cubeb_device_info * cur; + + if (type & CUBEB_DEVICE_TYPE_OUTPUT) { + for (i = 0; i < hwdevcount; i++) { + if ((cur = audiounit_create_device_from_hwdev(hwdevs[i], CUBEB_DEVICE_TYPE_OUTPUT)) != NULL) + (*collection)->device[(*collection)->count++] = cur; + } + } + + if (type & CUBEB_DEVICE_TYPE_INPUT) { + for (i = 0; i < hwdevcount; i++) { + if ((cur = audiounit_create_device_from_hwdev(hwdevs[i], CUBEB_DEVICE_TYPE_INPUT)) != NULL) + (*collection)->device[(*collection)->count++] = cur; + } + } + } + + delete [] hwdevs; + + return CUBEB_OK; +} + +/* qsort compare method. */ +int compare_devid(const void * a, const void * b) +{ + return (*(AudioObjectID*)a - *(AudioObjectID*)b); +} + +static uint32_t +audiounit_get_devices_of_type(cubeb_device_type devtype, AudioObjectID ** devid_array) +{ + assert(devid_array == NULL || *devid_array == NULL); + + AudioObjectPropertyAddress adr = { kAudioHardwarePropertyDevices, + kAudioObjectPropertyScopeGlobal, + kAudioObjectPropertyElementMaster }; + UInt32 size = 0; + OSStatus ret = AudioObjectGetPropertyDataSize(kAudioObjectSystemObject, &adr, 0, NULL, &size); + if (ret != noErr) { + return 0; + } + /* Total number of input and output devices. */ + uint32_t count = (uint32_t)(size / sizeof(AudioObjectID)); + + AudioObjectID devices[count]; + ret = AudioObjectGetPropertyData(kAudioObjectSystemObject, &adr, 0, NULL, &size, &devices); + if (ret != noErr) { + return 0; + } + /* Expected sorted but did not find anything in the docs. */ + qsort(devices, count, sizeof(AudioObjectID), compare_devid); + + if (devtype == (CUBEB_DEVICE_TYPE_INPUT | CUBEB_DEVICE_TYPE_OUTPUT)) { + if (devid_array) { + *devid_array = new AudioObjectID[count]; + assert(*devid_array); + memcpy(*devid_array, &devices, count * sizeof(AudioObjectID)); + } + return count; + } + + AudioObjectPropertyScope scope = (devtype == CUBEB_DEVICE_TYPE_INPUT) ? + kAudioDevicePropertyScopeInput : + kAudioDevicePropertyScopeOutput; + + uint32_t dev_count = 0; + AudioObjectID devices_in_scope[count]; + for(uint32_t i = 0; i < count; ++i) { + /* For device in the given scope channel must be > 0. */ + if (audiounit_get_channel_count(devices[i], scope) > 0) { + devices_in_scope[dev_count] = devices[i]; + ++dev_count; + } + } + + if (devid_array && dev_count > 0) { + *devid_array = new AudioObjectID[dev_count]; + assert(*devid_array); + memcpy(*devid_array, &devices_in_scope, dev_count * sizeof(AudioObjectID)); + } + return dev_count; +} + +static uint32_t +audiounit_equal_arrays(AudioObjectID * left, AudioObjectID * right, uint32_t size) +{ + /* Expected sorted arrays. */ + for (uint32_t i = 0; i < size; ++i) { + if (left[i] != right[i]) { + return 0; + } + } + return 1; +} + +static OSStatus +audiounit_collection_changed_callback(AudioObjectID /* inObjectID */, + UInt32 /* inNumberAddresses */, + const AudioObjectPropertyAddress * /* inAddresses */, + void * inClientData) +{ + cubeb * context = static_cast<cubeb *>(inClientData); + auto_lock lock(context->mutex); + + if (context->collection_changed_callback == NULL) { + /* Listener removed while waiting in mutex, abort. */ + return noErr; + } + + /* Differentiate input from output changes. */ + if (context->collection_changed_devtype == CUBEB_DEVICE_TYPE_INPUT || + context->collection_changed_devtype == CUBEB_DEVICE_TYPE_OUTPUT) { + AudioObjectID * devices = NULL; + uint32_t new_number_of_devices = audiounit_get_devices_of_type(context->collection_changed_devtype, &devices); + /* When count is the same examine the devid for the case of coalescing. */ + if (context->devtype_device_count == new_number_of_devices && + audiounit_equal_arrays(devices, context->devtype_device_array, new_number_of_devices)) { + /* Device changed for the other scope, ignore. */ + delete [] devices; + return noErr; + } + /* Device on desired scope changed, reset counter and array. */ + context->devtype_device_count = new_number_of_devices; + /* Free the old array before replace. */ + delete [] context->devtype_device_array; + context->devtype_device_array = devices; + } + + context->collection_changed_callback(context, context->collection_changed_user_ptr); + return noErr; +} + +static OSStatus +audiounit_add_device_listener(cubeb * context, + cubeb_device_type devtype, + cubeb_device_collection_changed_callback collection_changed_callback, + void * user_ptr) +{ + /* Note: second register without unregister first causes 'nope' error. + * Current implementation requires unregister before register a new cb. */ + assert(context->collection_changed_callback == NULL); + + AudioObjectPropertyAddress devAddr; + devAddr.mSelector = kAudioHardwarePropertyDevices; + devAddr.mScope = kAudioObjectPropertyScopeGlobal; + devAddr.mElement = kAudioObjectPropertyElementMaster; + + OSStatus ret = AudioObjectAddPropertyListener(kAudioObjectSystemObject, + &devAddr, + audiounit_collection_changed_callback, + context); + if (ret == noErr) { + /* Expected zero after unregister. */ + assert(context->devtype_device_count == 0); + assert(context->devtype_device_array == NULL); + /* Listener works for input and output. + * When requested one of them we need to differentiate. */ + if (devtype == CUBEB_DEVICE_TYPE_INPUT || + devtype == CUBEB_DEVICE_TYPE_OUTPUT) { + /* Used to differentiate input from output device changes. */ + context->devtype_device_count = audiounit_get_devices_of_type(devtype, &context->devtype_device_array); + } + context->collection_changed_devtype = devtype; + context->collection_changed_callback = collection_changed_callback; + context->collection_changed_user_ptr = user_ptr; + } + return ret; +} + +static OSStatus +audiounit_remove_device_listener(cubeb * context) +{ + AudioObjectPropertyAddress devAddr; + devAddr.mSelector = kAudioHardwarePropertyDevices; + devAddr.mScope = kAudioObjectPropertyScopeGlobal; + devAddr.mElement = kAudioObjectPropertyElementMaster; + + /* Note: unregister a non registered cb is not a problem, not checking. */ + OSStatus ret = AudioObjectRemovePropertyListener(kAudioObjectSystemObject, + &devAddr, + audiounit_collection_changed_callback, + context); + if (ret == noErr) { + /* Reset all values. */ + context->collection_changed_devtype = CUBEB_DEVICE_TYPE_UNKNOWN; + context->collection_changed_callback = NULL; + context->collection_changed_user_ptr = NULL; + context->devtype_device_count = 0; + if (context->devtype_device_array) { + delete [] context->devtype_device_array; + context->devtype_device_array = NULL; + } + } + return ret; +} + +int audiounit_register_device_collection_changed(cubeb * context, + cubeb_device_type devtype, + cubeb_device_collection_changed_callback collection_changed_callback, + void * user_ptr) +{ + OSStatus ret; + auto_lock lock(context->mutex); + if (collection_changed_callback) { + ret = audiounit_add_device_listener(context, devtype, + collection_changed_callback, + user_ptr); + } else { + ret = audiounit_remove_device_listener(context); + } + return (ret == noErr) ? CUBEB_OK : CUBEB_ERROR; +} + +cubeb_ops const audiounit_ops = { + /*.init =*/ audiounit_init, + /*.get_backend_id =*/ audiounit_get_backend_id, + /*.get_max_channel_count =*/ audiounit_get_max_channel_count, + /*.get_min_latency =*/ audiounit_get_min_latency, + /*.get_preferred_sample_rate =*/ audiounit_get_preferred_sample_rate, + /*.enumerate_devices =*/ audiounit_enumerate_devices, + /*.destroy =*/ audiounit_destroy, + /*.stream_init =*/ audiounit_stream_init, + /*.stream_destroy =*/ audiounit_stream_destroy, + /*.stream_start =*/ audiounit_stream_start, + /*.stream_stop =*/ audiounit_stream_stop, + /*.stream_get_position =*/ audiounit_stream_get_position, + /*.stream_get_latency =*/ audiounit_stream_get_latency, + /*.stream_set_volume =*/ audiounit_stream_set_volume, + /*.stream_set_panning =*/ audiounit_stream_set_panning, + /*.stream_get_current_device =*/ audiounit_stream_get_current_device, + /*.stream_device_destroy =*/ audiounit_stream_device_destroy, + /*.stream_register_device_changed_callback =*/ audiounit_stream_register_device_changed_callback, + /*.register_device_collection_changed =*/ audiounit_register_device_collection_changed +}; |