Add m-esr52 at 52.6.0

1 files changed, 256 insertions, 0 deletions

diff --git a/xpcom/io/SnappyCompressOutputStream.cpp b/xpcom/io/SnappyCompressOutputStream.cpp
new file mode 100644
index 0000000000..89b8a08081
--- /dev/null
+++ b/xpcom/io/SnappyCompressOutputStream.cpp
@@ -0,0 +1,256 @@
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* vim: set ts=8 sts=2 et sw=2 tw=80: */
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+#include "mozilla/SnappyCompressOutputStream.h"
+
+#include <algorithm>
+#include "nsStreamUtils.h"
+#include "snappy/snappy.h"
+
+namespace mozilla {
+
+NS_IMPL_ISUPPORTS(SnappyCompressOutputStream, nsIOutputStream);
+
+// static
+const size_t
+SnappyCompressOutputStream::kMaxBlockSize = snappy::kBlockSize;
+
+SnappyCompressOutputStream::SnappyCompressOutputStream(nsIOutputStream* aBaseStream,
+                                                       size_t aBlockSize)
+ : mBaseStream(aBaseStream)
+ , mBlockSize(std::min(aBlockSize, kMaxBlockSize))
+ , mNextByte(0)
+ , mCompressedBufferLength(0)
+ , mStreamIdentifierWritten(false)
+{
+  MOZ_ASSERT(mBlockSize > 0);
+
+  // This implementation only supports sync base streams.  Verify this in debug
+  // builds.  Note, this can be simpler than the check in
+  // SnappyUncompressInputStream because we don't have to deal with the
+  // nsStringInputStream oddness of being non-blocking and sync.
+#ifdef DEBUG
+  bool baseNonBlocking;
+  nsresult rv = mBaseStream->IsNonBlocking(&baseNonBlocking);
+  MOZ_ASSERT(NS_SUCCEEDED(rv));
+  MOZ_ASSERT(!baseNonBlocking);
+#endif
+}
+
+size_t
+SnappyCompressOutputStream::BlockSize() const
+{
+  return mBlockSize;
+}
+
+NS_IMETHODIMP
+SnappyCompressOutputStream::Close()
+{
+  if (!mBaseStream) {
+    return NS_OK;
+  }
+
+  nsresult rv = Flush();
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+
+  mBaseStream->Close();
+  mBaseStream = nullptr;
+
+  mBuffer = nullptr;
+  mCompressedBuffer = nullptr;
+
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+SnappyCompressOutputStream::Flush()
+{
+  if (!mBaseStream) {
+    return NS_BASE_STREAM_CLOSED;
+  }
+
+  nsresult rv = FlushToBaseStream();
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+
+  mBaseStream->Flush();
+
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+SnappyCompressOutputStream::Write(const char* aBuf, uint32_t aCount,
+                                  uint32_t* aResultOut)
+{
+  return WriteSegments(NS_CopySegmentToBuffer, const_cast<char*>(aBuf), aCount,
+                       aResultOut);
+}
+
+NS_IMETHODIMP
+SnappyCompressOutputStream::WriteFrom(nsIInputStream*, uint32_t, uint32_t*)
+{
+  return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP
+SnappyCompressOutputStream::WriteSegments(nsReadSegmentFun aReader,
+                                          void* aClosure,
+                                          uint32_t aCount,
+                                          uint32_t* aBytesWrittenOut)
+{
+  *aBytesWrittenOut = 0;
+
+  if (!mBaseStream) {
+    return NS_BASE_STREAM_CLOSED;
+  }
+
+  if (!mBuffer) {
+    mBuffer.reset(new (fallible) char[mBlockSize]);
+    if (NS_WARN_IF(!mBuffer)) {
+      return NS_ERROR_OUT_OF_MEMORY;
+    }
+  }
+
+  while (aCount > 0) {
+    // Determine how much space is left in our flat, uncompressed buffer.
+    MOZ_ASSERT(mNextByte <= mBlockSize);
+    uint32_t remaining = mBlockSize - mNextByte;
+
+    // If it is full, then compress and flush the data to the base stream.
+    if (remaining == 0) {
+      nsresult rv = FlushToBaseStream();
+      if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+
+      // Now the entire buffer should be available for copying.
+      MOZ_ASSERT(!mNextByte);
+      remaining = mBlockSize;
+    }
+
+    uint32_t numToRead = std::min(remaining, aCount);
+    uint32_t numRead = 0;
+
+    nsresult rv = aReader(this, aClosure, &mBuffer[mNextByte],
+                          *aBytesWrittenOut, numToRead, &numRead);
+
+    // As defined in nsIOutputStream.idl, do not pass reader func errors.
+    if (NS_FAILED(rv)) {
+      return NS_OK;
+    }
+
+    // End-of-file
+    if (numRead == 0) {
+      return NS_OK;
+    }
+
+    mNextByte += numRead;
+    *aBytesWrittenOut += numRead;
+    aCount -= numRead;
+  }
+
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+SnappyCompressOutputStream::IsNonBlocking(bool* aNonBlockingOut)
+{
+  *aNonBlockingOut = false;
+  return NS_OK;
+}
+
+SnappyCompressOutputStream::~SnappyCompressOutputStream()
+{
+  Close();
+}
+
+nsresult
+SnappyCompressOutputStream::FlushToBaseStream()
+{
+  MOZ_ASSERT(mBaseStream);
+
+  // Lazily create the compressed buffer on our first flush.  This
+  // allows us to report OOM during stream operation.  This buffer
+  // will then get re-used until the stream is closed.
+  if (!mCompressedBuffer) {
+    mCompressedBufferLength = MaxCompressedBufferLength(mBlockSize);
+    mCompressedBuffer.reset(new (fallible) char[mCompressedBufferLength]);
+    if (NS_WARN_IF(!mCompressedBuffer)) {
+      return NS_ERROR_OUT_OF_MEMORY;
+    }
+  }
+
+  // The first chunk must be a StreamIdentifier chunk.  Write it out
+  // if we have not done so already.
+  nsresult rv = MaybeFlushStreamIdentifier();
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+
+  // Compress the data to our internal compressed buffer.
+  size_t compressedLength;
+  rv = WriteCompressedData(mCompressedBuffer.get(), mCompressedBufferLength,
+                           mBuffer.get(), mNextByte, &compressedLength);
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+  MOZ_ASSERT(compressedLength > 0);
+
+  mNextByte = 0;
+
+  // Write the compressed buffer out to the base stream.
+  uint32_t numWritten = 0;
+  rv = WriteAll(mCompressedBuffer.get(), compressedLength, &numWritten);
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+  MOZ_ASSERT(compressedLength == numWritten);
+
+  return NS_OK;
+}
+
+nsresult
+SnappyCompressOutputStream::MaybeFlushStreamIdentifier()
+{
+  MOZ_ASSERT(mCompressedBuffer);
+
+  if (mStreamIdentifierWritten) {
+    return NS_OK;
+  }
+
+  // Build the StreamIdentifier in our compressed buffer.
+  size_t compressedLength;
+  nsresult rv = WriteStreamIdentifier(mCompressedBuffer.get(),
+                                      mCompressedBufferLength,
+                                      &compressedLength);
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+
+  // Write the compressed buffer out to the base stream.
+  uint32_t numWritten = 0;
+  rv = WriteAll(mCompressedBuffer.get(), compressedLength, &numWritten);
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+  MOZ_ASSERT(compressedLength == numWritten);
+
+  mStreamIdentifierWritten = true;
+
+  return NS_OK;
+}
+
+nsresult
+SnappyCompressOutputStream::WriteAll(const char* aBuf, uint32_t aCount,
+                                     uint32_t* aBytesWrittenOut)
+{
+  *aBytesWrittenOut = 0;
+
+  if (!mBaseStream) {
+    return NS_BASE_STREAM_CLOSED;
+  }
+
+  uint32_t offset = 0;
+  while (aCount > 0) {
+    uint32_t numWritten = 0;
+    nsresult rv = mBaseStream->Write(aBuf + offset, aCount, &numWritten);
+    if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+    offset += numWritten;
+    aCount -= numWritten;
+    *aBytesWrittenOut += numWritten;
+  }
+
+  return NS_OK;
+}
+
+} // namespace mozilla