Add m-esr52 at 52.6.0

1 files changed, 337 insertions, 0 deletions

diff --git a/widget/gonk/nativewindow/IGonkGraphicBufferConsumerLL.h b/widget/gonk/nativewindow/IGonkGraphicBufferConsumerLL.h
new file mode 100644
index 0000000000..8a93a08497
--- /dev/null
+++ b/widget/gonk/nativewindow/IGonkGraphicBufferConsumerLL.h
@@ -0,0 +1,337 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef NATIVEWINDOW_IGONKGRAPHICBUFFERCONSUMER_LL_H
+#define NATIVEWINDOW_IGONKGRAPHICBUFFERCONSUMER_LL_H
+
+#include <stdint.h>
+#include <sys/types.h>
+
+#include <utils/Errors.h>
+#include <utils/RefBase.h>
+#include <utils/Timers.h>
+
+#include <binder/IInterface.h>
+#include <ui/Rect.h>
+
+#include "mozilla/RefPtr.h"
+
+class ANativeWindowBuffer;
+
+namespace mozilla {
+namespace layers {
+class TextureClient;
+}
+}
+
+namespace android {
+// ----------------------------------------------------------------------------
+
+class Fence;
+class GraphicBuffer;
+class IConsumerListener;
+class NativeHandle;
+
+class IGonkGraphicBufferConsumer : public IInterface {
+public:
+
+    // public facing structure for BufferSlot
+    class BufferItem : public Flattenable<BufferItem> {
+        friend class Flattenable<BufferItem>;
+        size_t getPodSize() const;
+        size_t getFlattenedSize() const;
+        size_t getFdCount() const;
+        status_t flatten(void*& buffer, size_t& size, int*& fds, size_t& count) const;
+        status_t unflatten(void const*& buffer, size_t& size, int const*& fds, size_t& count);
+
+    public:
+        // The default value of mBuf, used to indicate this doesn't correspond to a slot.
+        enum { INVALID_BUFFER_SLOT = -1 };
+        BufferItem();
+
+        // mGraphicBuffer points to the buffer allocated for this slot, or is NULL
+        // if the buffer in this slot has been acquired in the past (see
+        // BufferSlot.mAcquireCalled).
+        sp<GraphicBuffer> mGraphicBuffer;
+
+        // mFence is a fence that will signal when the buffer is idle.
+        sp<Fence> mFence;
+
+        // mCrop is the current crop rectangle for this buffer slot.
+        Rect mCrop;
+
+        // mTransform is the current transform flags for this buffer slot.
+        // refer to NATIVE_WINDOW_TRANSFORM_* in <window.h>
+        uint32_t mTransform;
+
+        // mScalingMode is the current scaling mode for this buffer slot.
+        // refer to NATIVE_WINDOW_SCALING_* in <window.h>
+        uint32_t mScalingMode;
+
+        // mTimestamp is the current timestamp for this buffer slot. This gets
+        // to set by queueBuffer each time this slot is queued. This value
+        // is guaranteed to be monotonically increasing for each newly
+        // acquired buffer.
+        int64_t mTimestamp;
+
+        // mIsAutoTimestamp indicates whether mTimestamp was generated
+        // automatically when the buffer was queued.
+        bool mIsAutoTimestamp;
+
+        // mFrameNumber is the number of the queued frame for this slot.
+        uint64_t mFrameNumber;
+
+        // mBuf is the slot index of this buffer (default INVALID_BUFFER_SLOT).
+        int mBuf;
+
+        // mIsDroppable whether this buffer was queued with the
+        // property that it can be replaced by a new buffer for the purpose of
+        // making sure dequeueBuffer() won't block.
+        // i.e.: was the BufferQueue in "mDequeueBufferCannotBlock" when this buffer
+        // was queued.
+        bool mIsDroppable;
+
+        // Indicates whether this buffer has been seen by a consumer yet
+        bool mAcquireCalled;
+
+        // Indicates this buffer must be transformed by the inverse transform of the screen
+        // it is displayed onto. This is applied after mTransform.
+        bool mTransformToDisplayInverse;
+    };
+
+    enum {
+        // Returned by releaseBuffer, after which the consumer must
+        // free any references to the just-released buffer that it might have.
+        STALE_BUFFER_SLOT = 1,
+        // Returned by dequeueBuffer if there are no pending buffers available.
+        NO_BUFFER_AVAILABLE,
+        // Returned by dequeueBuffer if it's too early for the buffer to be acquired.
+        PRESENT_LATER,
+    };
+
+    // acquireBuffer attempts to acquire ownership of the next pending buffer in
+    // the BufferQueue.  If no buffer is pending then it returns
+    // NO_BUFFER_AVAILABLE.  If a buffer is successfully acquired, the
+    // information about the buffer is returned in BufferItem.
+    //
+    // If the buffer returned had previously been
+    // acquired then the BufferItem::mGraphicBuffer field of buffer is set to
+    // NULL and it is assumed that the consumer still holds a reference to the
+    // buffer.
+    //
+    // If presentWhen is non-zero, it indicates the time when the buffer will
+    // be displayed on screen.  If the buffer's timestamp is farther in the
+    // future, the buffer won't be acquired, and PRESENT_LATER will be
+    // returned.  The presentation time is in nanoseconds, and the time base
+    // is CLOCK_MONOTONIC.
+    //
+    // Return of NO_ERROR means the operation completed as normal.
+    //
+    // Return of a positive value means the operation could not be completed
+    //    at this time, but the user should try again later:
+    // * NO_BUFFER_AVAILABLE - no buffer is pending (nothing queued by producer)
+    // * PRESENT_LATER - the buffer's timestamp is farther in the future
+    //
+    // Return of a negative value means an error has occurred:
+    // * INVALID_OPERATION - too many buffers have been acquired
+    virtual status_t acquireBuffer(BufferItem* buffer, nsecs_t presentWhen) = 0;
+
+    // detachBuffer attempts to remove all ownership of the buffer in the given
+    // slot from the buffer queue. If this call succeeds, the slot will be
+    // freed, and there will be no way to obtain the buffer from this interface.
+    // The freed slot will remain unallocated until either it is selected to
+    // hold a freshly allocated buffer in dequeueBuffer or a buffer is attached
+    // to the slot. The buffer must have already been acquired.
+    //
+    // Return of a value other than NO_ERROR means an error has occurred:
+    // * BAD_VALUE - the given slot number is invalid, either because it is
+    //               out of the range [0, NUM_BUFFER_SLOTS) or because the slot
+    //               it refers to is not currently acquired.
+    virtual status_t detachBuffer(int slot) = 0;
+
+    // attachBuffer attempts to transfer ownership of a buffer to the buffer
+    // queue. If this call succeeds, it will be as if this buffer was acquired
+    // from the returned slot number. As such, this call will fail if attaching
+    // this buffer would cause too many buffers to be simultaneously acquired.
+    //
+    // If the buffer is successfully attached, its frameNumber is initialized
+    // to 0. This must be passed into the releaseBuffer call or else the buffer
+    // will be deallocated as stale.
+    //
+    // Return of a value other than NO_ERROR means an error has occurred:
+    // * BAD_VALUE - outSlot or buffer were NULL
+    // * INVALID_OPERATION - cannot attach the buffer because it would cause too
+    //                       many buffers to be acquired.
+    // * NO_MEMORY - no free slots available
+    virtual status_t attachBuffer(int *outSlot,
+            const sp<GraphicBuffer>& buffer) = 0;
+
+    // releaseBuffer releases a buffer slot from the consumer back to the
+    // BufferQueue.  This may be done while the buffer's contents are still
+    // being accessed.  The fence will signal when the buffer is no longer
+    // in use. frameNumber is used to indentify the exact buffer returned.
+    //
+    // If releaseBuffer returns STALE_BUFFER_SLOT, then the consumer must free
+    // any references to the just-released buffer that it might have, as if it
+    // had received a onBuffersReleased() call with a mask set for the released
+    // buffer.
+    //
+    // Note that the dependencies on EGL will be removed once we switch to using
+    // the Android HW Sync HAL.
+    //
+    // Return of NO_ERROR means the operation completed as normal.
+    //
+    // Return of a positive value means the operation could not be completed
+    //    at this time, but the user should try again later:
+    // * STALE_BUFFER_SLOT - see above (second paragraph)
+    //
+    // Return of a negative value means an error has occurred:
+    // * BAD_VALUE - one of the following could've happened:
+    //               * the buffer slot was invalid
+    //               * the fence was NULL
+    //               * the buffer slot specified is not in the acquired state
+    virtual status_t releaseBuffer(int buf, uint64_t frameNumber, const sp<Fence>& releaseFence) = 0;
+
+    // consumerConnect connects a consumer to the BufferQueue.  Only one
+    // consumer may be connected, and when that consumer disconnects the
+    // BufferQueue is placed into the "abandoned" state, causing most
+    // interactions with the BufferQueue by the producer to fail.
+    // controlledByApp indicates whether the consumer is controlled by
+    // the application.
+    //
+    // consumer may not be NULL.
+    //
+    // Return of a value other than NO_ERROR means an error has occurred:
+    // * NO_INIT - the buffer queue has been abandoned
+    // * BAD_VALUE - a NULL consumer was provided
+    virtual status_t consumerConnect(const sp<IConsumerListener>& consumer, bool controlledByApp) = 0;
+
+    // consumerDisconnect disconnects a consumer from the BufferQueue. All
+    // buffers will be freed and the BufferQueue is placed in the "abandoned"
+    // state, causing most interactions with the BufferQueue by the producer to
+    // fail.
+    //
+    // Return of a value other than NO_ERROR means an error has occurred:
+    // * BAD_VALUE - no consumer is currently connected
+    virtual status_t consumerDisconnect() = 0;
+
+    // getReleasedBuffers sets the value pointed to by slotMask to a bit set.
+    // Each bit index with a 1 corresponds to a released buffer slot with that
+    // index value.  In particular, a released buffer is one that has
+    // been released by the BufferQueue but have not yet been released by the consumer.
+    //
+    // This should be called from the onBuffersReleased() callback.
+    //
+    // Return of a value other than NO_ERROR means an error has occurred:
+    // * NO_INIT - the buffer queue has been abandoned.
+    virtual status_t getReleasedBuffers(uint64_t* slotMask) = 0;
+
+    // setDefaultBufferSize is used to set the size of buffers returned by
+    // dequeueBuffer when a width and height of zero is requested.  Default
+    // is 1x1.
+    //
+    // Return of a value other than NO_ERROR means an error has occurred:
+    // * BAD_VALUE - either w or h was zero
+    virtual status_t setDefaultBufferSize(uint32_t w, uint32_t h) = 0;
+
+    // setDefaultMaxBufferCount sets the default value for the maximum buffer
+    // count (the initial default is 2). If the producer has requested a
+    // buffer count using setBufferCount, the default buffer count will only
+    // take effect if the producer sets the count back to zero.
+    //
+    // The count must be between 2 and NUM_BUFFER_SLOTS, inclusive.
+    //
+    // Return of a value other than NO_ERROR means an error has occurred:
+    // * BAD_VALUE - bufferCount was out of range (see above).
+    virtual status_t setDefaultMaxBufferCount(int bufferCount) = 0;
+
+    // disableAsyncBuffer disables the extra buffer used in async mode
+    // (when both producer and consumer have set their "isControlledByApp"
+    // flag) and has dequeueBuffer() return WOULD_BLOCK instead.
+    //
+    // This can only be called before consumerConnect().
+    //
+    // Return of a value other than NO_ERROR means an error has occurred:
+    // * INVALID_OPERATION - attempting to call this after consumerConnect.
+    virtual status_t disableAsyncBuffer() = 0;
+
+    // setMaxAcquiredBufferCount sets the maximum number of buffers that can
+    // be acquired by the consumer at one time (default 1).  This call will
+    // fail if a producer is connected to the BufferQueue.
+    //
+    // maxAcquiredBuffers must be (inclusive) between 1 and MAX_MAX_ACQUIRED_BUFFERS.
+    //
+    // Return of a value other than NO_ERROR means an error has occurred:
+    // * BAD_VALUE - maxAcquiredBuffers was out of range (see above).
+    // * INVALID_OPERATION - attempting to call this after a producer connected.
+    virtual status_t setMaxAcquiredBufferCount(int maxAcquiredBuffers) = 0;
+
+    // setConsumerName sets the name used in logging
+    virtual void setConsumerName(const String8& name) = 0;
+
+    // setDefaultBufferFormat allows the BufferQueue to create
+    // GraphicBuffers of a defaultFormat if no format is specified
+    // in dequeueBuffer.  Formats are enumerated in graphics.h; the
+    // initial default is HAL_PIXEL_FORMAT_RGBA_8888.
+    //
+    // Return of a value other than NO_ERROR means an unknown error has occurred.
+    virtual status_t setDefaultBufferFormat(uint32_t defaultFormat) = 0;
+
+    // setConsumerUsageBits will turn on additional usage bits for dequeueBuffer.
+    // These are merged with the bits passed to dequeueBuffer.  The values are
+    // enumerated in gralloc.h, e.g. GRALLOC_USAGE_HW_RENDER; the default is 0.
+    //
+    // Return of a value other than NO_ERROR means an unknown error has occurred.
+    virtual status_t setConsumerUsageBits(uint32_t usage) = 0;
+
+    // setTransformHint bakes in rotation to buffers so overlays can be used.
+    // The values are enumerated in window.h, e.g.
+    // NATIVE_WINDOW_TRANSFORM_ROT_90.  The default is 0 (no transform).
+    //
+    // Return of a value other than NO_ERROR means an unknown error has occurred.
+    virtual status_t setTransformHint(uint32_t hint) = 0;
+
+    // Retrieve the sideband buffer stream, if any.
+    virtual sp<NativeHandle> getSidebandStream() const = 0;
+
+    // dump state into a string
+    virtual void dumpToString(String8& result, const char* prefix) const = 0;
+
+    // Added by mozilla
+    virtual already_AddRefed<mozilla::layers::TextureClient>
+        getTextureClientFromBuffer(ANativeWindowBuffer* buffer) = 0;
+
+    virtual int getSlotFromTextureClientLocked(mozilla::layers::TextureClient* client) const = 0;
+
+public:
+    DECLARE_META_INTERFACE(GonkGraphicBufferConsumer);
+};
+
+// ----------------------------------------------------------------------------
+
+class BnGonkGraphicBufferConsumer : public BnInterface<IGonkGraphicBufferConsumer>
+{
+public:
+    virtual status_t    onTransact( uint32_t code,
+                                    const Parcel& data,
+                                    Parcel* reply,
+                                    uint32_t flags = 0);
+};
+
+// ----------------------------------------------------------------------------
+}; // namespace android
+
+#endif // ANDROID_GUI_IGONKGRAPHICBUFFERCONSUMER_H