From 2cbbb85ddb88d186881111c52c5604289770ea97 Mon Sep 17 00:00:00 2001 From: Sean Donner Date: Tue, 11 May 2010 20:01:42 +0200 Subject: network/radvd: Added to 12.0 repository --- network/radvd/README | 22 +++++++++++ network/radvd/doinst.sh | 23 +++++++++++ network/radvd/radvd.SlackBuild | 88 ++++++++++++++++++++++++++++++++++++++++++ network/radvd/radvd.info | 8 ++++ network/radvd/rc.radvd.new | 44 +++++++++++++++++++++ network/radvd/slack-desc | 19 +++++++++ 6 files changed, 204 insertions(+) create mode 100644 network/radvd/README create mode 100644 network/radvd/doinst.sh create mode 100644 network/radvd/radvd.SlackBuild create mode 100644 network/radvd/radvd.info create mode 100644 network/radvd/rc.radvd.new create mode 100644 network/radvd/slack-desc (limited to 'network') diff --git a/network/radvd/README b/network/radvd/README new file mode 100644 index 0000000000..9dc84d056d --- /dev/null +++ b/network/radvd/README @@ -0,0 +1,22 @@ +The router advertisement daemon (radvd) is run by Linux or BSD systems +acting as IPv6 routers. It sends Router Advertisement messages, +specified by RFC 2461, to a local Ethernet LAN periodically and when +requested by a node sending a Router Solicitation message. These +messages are required for IPv6 stateless autoconfiguration. + +Radvd is dependant upon IPv6 support in the Linux Kernel; this comes +enabled by default with Slackware 12's 'generic' kernel. To enable +IPv6 support manually, you must set the following entry in your +kernel's '.config' file and recompile: + CONFIG_IPV6=m + +Once the Slackware package is installed, edit /etc/radvd.conf to +reflect your current IPv6 configuration. + +An init script has been provided at /etc/rc.d/rc.radvd. +To have radvd start at each boot, add the following lines to your +/etc/rc.d/rc.local file: + # Start the radvd daemon: + if [ -x /etc/rc.d/rc.radvd ]; then + /etc/rc.d/rc.radvd start + fi diff --git a/network/radvd/doinst.sh b/network/radvd/doinst.sh new file mode 100644 index 0000000000..d3f1e88aaa --- /dev/null +++ b/network/radvd/doinst.sh @@ -0,0 +1,23 @@ +#!/bin/sh + +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +# Keep same perms on rc.radvd.new: +if [ -e etc/rc.d/rc.radvd ]; then + cp -a etc/rc.d/rc.radvd etc/rc.d/rc.radvd.new.incoming + cat etc/rc.d/rc.radvd.new > etc/rc.d/rc.radvd.new.incoming + mv etc/rc.d/rc.radvd.new.incoming etc/rc.d/rc.radvd.new +fi + +config etc/rc.d/rc.radvd.new +config etc/radvd.conf.new diff --git a/network/radvd/radvd.SlackBuild b/network/radvd/radvd.SlackBuild new file mode 100644 index 0000000000..2a724363ea --- /dev/null +++ b/network/radvd/radvd.SlackBuild @@ -0,0 +1,88 @@ +#!/bin/sh + +# Slackware build script for radvd + +# Copyright 2007-2008 Sean Donner (sean.donner@sbcglobal.net) +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=radvd +VERSION=1.0 +ARCH=${ARCH:-i486} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz || exit 1 +cd $PRGNAM-$VERSION +chown -R root:root . +chmod -R u+w,go+r-w,a-s . + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --with-configfile=/etc/radvd.conf \ + --with-pidfile=/var/run/radvd/radvd.pid + +make all || exit 1 +make install DESTDIR=$PKG || exit 1 + +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs strip --strip-debug 2> /dev/null +) + +( cd $PKG/usr/man + find . -type f -exec gzip -9 {} \; +) + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a CHANGES COPYRIGHT INTRO.html README TODO VERSION \ + $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/etc/rc.d +install -m 0755 $CWD/rc.radvd.new $PKG/etc/rc.d/rc.radvd.new +mv $TMP/$PRGNAM-$VERSION/radvd.conf.example $PKG/etc/radvd.conf.new + +mkdir -p $PKG/var/run/radvd/ +chown daemon:daemon $PKG/var/run/radvd/ + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz diff --git a/network/radvd/radvd.info b/network/radvd/radvd.info new file mode 100644 index 0000000000..6e12569710 --- /dev/null +++ b/network/radvd/radvd.info @@ -0,0 +1,8 @@ +PRGNAM="radvd" +VERSION="1.0" +HOMEPAGE="http://www.litech.org/radvd" +DOWNLOAD="http://www.litech.org/radvd/dist/radvd-1.0.tar.gz" +MD5SUM="8bce4a21757cf069f5a69e2f9bee9e5b" +MAINTAINER="Sean Donner" +EMAIL="sean.donner@sbcglobal.net" +APPROVED="rworkman" diff --git a/network/radvd/rc.radvd.new b/network/radvd/rc.radvd.new new file mode 100644 index 0000000000..617a82b543 --- /dev/null +++ b/network/radvd/rc.radvd.new @@ -0,0 +1,44 @@ +#!/bin/sh +# +# /etc/rc.d/rc.radvd +# +# Start/stop/restart the radvd daemon. +# + +if ! [ -f /proc/net/if_inet6 ]; then + echo "IPv6 support not found; exiting..." + exit 1 +fi + +radvd_start() { + if [ -x /usr/sbin/radvd ]; then + echo "Starting radvd..." + echo 1 > /proc/sys/net/ipv6/conf/all/forwarding + /usr/sbin/radvd -u daemon + fi +} + +radvd_stop() { + /bin/kill $(cat /var/run/radvd/radvd.pid) + rm -f /var/run/radvd/radvd.pid +} + +radvd_restart() { + radvd_stop + sleep 2 + radvd_start +} + +case "$1" in +'start') + radvd_start + ;; +'stop') + radvd_stop + ;; +'restart') + radvd_restart + ;; +*) + echo "usage $0 start|stop|restart" +esac diff --git a/network/radvd/slack-desc b/network/radvd/slack-desc new file mode 100644 index 0000000000..c032d8df60 --- /dev/null +++ b/network/radvd/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +radvd: Linux IPv6 Router Advertisement Daemon (radvd) +radvd: +radvd: The router advertisement daemon (radvd) is run by Linux or BSD systems +radvd: acting as IPv6 routers. It sends Router Advertisement messages, +radvd: specified by RFC 2461, to a local Ethernet LAN periodically and when +radvd: requested by a node sending a Router Solicitation message. These +radvd: messages are required for IPv6 stateless autoconfiguration. +radvd: +radvd: +radvd: +radvd: -- cgit v1.2.3