From 4bb5a880c77760d71e235715a84b44c2b9f30879 Mon Sep 17 00:00:00 2001
From: mario <mario@slackverse.org>
Date: Thu, 17 Jun 2010 01:17:00 -0500
Subject: network/freeradius-server: Added (Radius protocol server)

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>
---
 network/freeradius-server/README                   |   8 ++
 network/freeradius-server/doinst.sh                |  35 +++++++
 .../freeradius-server/freeradius-server.SlackBuild | 113 +++++++++++++++++++++
 network/freeradius-server/freeradius-server.info   |  10 ++
 network/freeradius-server/slack-desc               |  20 ++++
 5 files changed, 186 insertions(+)
 create mode 100644 network/freeradius-server/README
 create mode 100644 network/freeradius-server/doinst.sh
 create mode 100644 network/freeradius-server/freeradius-server.SlackBuild
 create mode 100644 network/freeradius-server/freeradius-server.info
 create mode 100644 network/freeradius-server/slack-desc

diff --git a/network/freeradius-server/README b/network/freeradius-server/README
new file mode 100644
index 0000000000..813a602bbb
--- /dev/null
+++ b/network/freeradius-server/README
@@ -0,0 +1,8 @@
+FreeRADIUS Server (Radius protocol server)
+
+The FreeRADIUS Server is a daemon for unix and unix like operating systems 
+which allows one to set up a radius protocol server, which can be used for 
+Authentication and Accounting various types of network access.  To use the 
+server, you also need a correctly setup client which will talk to it, 
+including terminal servers, Ethernet Switches, Wireless Access Points or a 
+PC with appropriate software which emulates it (PortSlave, radiusclient etc).
diff --git a/network/freeradius-server/doinst.sh b/network/freeradius-server/doinst.sh
new file mode 100644
index 0000000000..f1d6d8e529
--- /dev/null
+++ b/network/freeradius-server/doinst.sh
@@ -0,0 +1,35 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.radiusd.new
+config etc/raddb/clients.conf.new
+config etc/raddb/eap.conf.new
+config etc/raddb/experimental.conf.new
+config etc/raddb/policy.conf.new
+config etc/raddb/proxy.conf.new
+config etc/raddb/radiusd.conf.new
+config etc/raddb/sql.conf.new
+config etc/raddb/sqlippool.conf.new
+config etc/raddb/templates.conf.new
+
diff --git a/network/freeradius-server/freeradius-server.SlackBuild b/network/freeradius-server/freeradius-server.SlackBuild
new file mode 100644
index 0000000000..8d84f9a02c
--- /dev/null
+++ b/network/freeradius-server/freeradius-server.SlackBuild
@@ -0,0 +1,113 @@
+#!/bin/sh
+
+# Slackware build script for FreeRADIUS Server
+
+# Copyright 2010, mario <mario@slackverse.org>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=freeradius-server
+VERSION=${VERSION:-2.1.9}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar jxvf $CWD/$PRGNAM-$VERSION.tar.bz2
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --with-docdir=/usr/doc/$PRGNAM-$VERSION \
+  --disable-static \
+  --with-system-libtool \
+  --build=$ARCH-slackware-linux
+
+make
+make install R=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# Copy rc script
+install -D -m0644 -oroot -groot scripts/rc.radiusd $PKG/etc/rc.d/rc.radiusd.new
+
+# Append .new to config files
+for i in $PKG/etc/raddb/*.conf ; do mv $i $i.new ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  COPYRIGHT CREDITS INSTALL LICENSE README VERSION \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/freeradius-server/freeradius-server.info b/network/freeradius-server/freeradius-server.info
new file mode 100644
index 0000000000..96bbd2ced7
--- /dev/null
+++ b/network/freeradius-server/freeradius-server.info
@@ -0,0 +1,10 @@
+PRGNAM="freeradius-server"
+VERSION="2.1.9"
+HOMEPAGE="http://www.freeradius.org/"
+DOWNLOAD="ftp://ftp.freeradius.org/pub/freeradius/freeradius-server-2.1.9.tar.bz2"
+MD5SUM="5e16a0869acdf448b191c7e30f6507d8"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="mario"
+EMAIL="mario@slackverse.org"
+APPROVED="rworkman"
diff --git a/network/freeradius-server/slack-desc b/network/freeradius-server/slack-desc
new file mode 100644
index 0000000000..e1afb462c0
--- /dev/null
+++ b/network/freeradius-server/slack-desc
@@ -0,0 +1,20 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                 |-----handy-ruler------------------------------------------------------|
+freeradius-server: FreeRADIUS Server (Radius protocol server)
+freeradius-server:
+freeradius-server: The FreeRADIUS Server is a daemon for unix and unix like operating
+freeradius-server: systems which allows one to set up a radius protocol server, which
+freeradius-server: can be used for Authentication and Accounting various types of
+freeradius-server: network access. To use the server, you also need a correctly setup
+freeradius-server: client which will talk to it, including terminal servers, Ethernet
+freeradius-server: Switches, Wireless Access Points or a PC with appropriate software
+freeradius-server: which emulates it (PortSlave, radiusclient etc).
+freeradius-server:
+freeradius-server: Homepage: http://www.freeradius.org/
+freeradius-server:
-- 
cgit v1.2.3