5 files changed, 0 insertions, 172 deletions
diff --git a/system/xf86-input-synaptics/README b/system/xf86-input-synaptics/README
deleted file mode 100644
index 25458be286..0000000000
--- a/system/xf86-input-synaptics/README
+++ /dev/null
@@ -1,23 +0,0 @@
-This is a driver for the Synaptics TouchPad for XOrg. A Synaptics touchpad 
-by default operates in compatibility mode by emulating a standard mouse. 
-However, by using a dedicated driver, more advanced features of the touchpad 
-becomes available.
-
-Features:
-  Movement with adjustable, non-linear acceleration and speed.
-  Button events through short touching of the touchpad.
-  Double-Button events through double short touching of the touchpad.
-  Dragging through short touching and holding down on the touchpad.
-  Middle and right button events on the corners of the touchpad.
-  Vertical scrolling through moving on the right side of the touchpad.
-  The up/down button sends button four/five events.
-  Horizontal scrolling through moving on the lower side of the touchpad.
-  The multi-buttons send button events for scrolling.
-  Adjustable finger detection.
-  Multifinger taps (Not all hardware implements this feature.)
-  Run-time configuration using shared memory.
-
-This driver requires manual configuration of X.org/XFree86.
-Review the INSTALL file in /usr/doc/xf86-input-synaptics-0.99.1 for details,
-and also see /usr/doc/xf86-input-synaptics-0.99.1/README-SLACKWARE
-for a hint.
diff --git a/system/xf86-input-synaptics/README.SLACKWARE b/system/xf86-input-synaptics/README.SLACKWARE
deleted file mode 100644
index 7b20b722a5..0000000000
--- a/system/xf86-input-synaptics/README.SLACKWARE
+++ /dev/null
@@ -1,28 +0,0 @@
-/usr/doc/xf86-input-synaptics-0.99.1/README.SLACKWARE
-
-Last modified 20081113 - rworkman@slackbuilds.org
-
-On every system I've tested, the synaptics xorg module requires that
-the psmouse kernel module be loaded without any special options.
-This poses a problem on a default Slackware 12.1 installation, as
-/etc/modprobe.d/psmouse causes the psmouse module to load with the
-imps protocol.  This is easily fixed though :-)
-
-First, edit /etc/modprobe.d/psmouse so that it looks like this (note 
-that we're simply commenting out the last line):
-  # PS/2 mouse support:
-  # The default options when the psmouse module is loaded will completely
-  # break the mouse if you change consoles with several models of KVM
-  # switches.  Therefore, we'll have it use the imps protocol here, which
-  # is a more basic protocol that is less likely to cause problems with
-  # the mouse.  If you'd rather use the kernel default options, just
-  # comment out the line below.  If you'd rather choose your own options,
-  # then edit the line below as desired.
-  #options psmouse proto=imps
-
-Next, unload and reload the psmouse module (do this as root):
-  modprobe -r psmouse
-  modprobe psmouse
-
-That's it - now just follow the instructions for editing your xorg.conf!
-
diff --git a/system/xf86-input-synaptics/slack-desc b/system/xf86-input-synaptics/slack-desc
deleted file mode 100644
index 156b83ed15..0000000000
--- a/system/xf86-input-synaptics/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                    |-----handy-ruler----------------------------------------|
-xf86-input-synaptics: xf86-input-synaptics (Synaptics touchpad driver)
-xf86-input-synaptics:
-xf86-input-synaptics: This is a driver for the Synaptics TouchPad for XOrg.
-xf86-input-synaptics:
-xf86-input-synaptics: A Synaptics touchpad by default operates in 
-xf86-input-synaptics: compatibility mode by emulating a standard mouse.
-xf86-input-synaptics: However, by using a dedicated driver, more advanced
-xf86-input-synaptics: features of the touchpad become available.
-xf86-input-synaptics:
-xf86-input-synaptics:
-xf86-input-synaptics:
diff --git a/system/xf86-input-synaptics/xf86-input-synaptics.SlackBuild b/system/xf86-input-synaptics/xf86-input-synaptics.SlackBuild
deleted file mode 100644
index c75a23a834..0000000000
--- a/system/xf86-input-synaptics/xf86-input-synaptics.SlackBuild
+++ /dev/null
@@ -1,94 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008  Robby Workman  Northport, AL, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Modified by Heinz Wiesinger <hmwiesinger@gmx.at>
-#  -- no additional license terms added
-
-NAME=xf86-input-synaptics
-VERSION=0.99.1
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$NAME
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-tar xvf $CWD/$NAME-$VERSION.tar.bz2
-cd $NAME-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --sysconfdir=/etc/X11 \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --build=$ARCH-slackware-linux
-
-make
-make install DESTDIR=$PKG
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/doc/$NAME-$VERSION/fdi
-cp -a ChangeLog COPYING INSTALL NEWS README TODO \
-  $PKG/usr/doc/$NAME-$VERSION
-cat $CWD/$NAME.SlackBuild > $PKG/usr/doc/$NAME-$VERSION/$NAME.SlackBuild
-cat $CWD/README.SLACKWARE > $PKG/usr/doc/$NAME-$VERSION/README.SLACKWARE
-# Put the example fdi file in here and change the manpage to reference
-# the correct directory
-cp fdi/11-x11-synaptics.fdi $PKG/usr/doc/$NAME-$VERSION/fdi
-sed -i s%\$\{sourcecode\}%/usr/doc/$NAME-$VERSION% \
-  $PKG/usr/man/man4/synaptics.4
-
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n -p $OUTPUT/$NAME-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/xf86-input-synaptics/xf86-input-synaptics.info b/system/xf86-input-synaptics/xf86-input-synaptics.info
deleted file mode 100644
index 85096dd420..0000000000
--- a/system/xf86-input-synaptics/xf86-input-synaptics.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="xf86-input-synaptics"
-VERSION="0.99.1"
-HOMEPAGE="http://xorg.freedesktop.org/"
-DOWNLOAD="http://xorg.freedesktop.org/archive/individual/driver/xf86-input-synaptics-0.99.1.tar.bz2"
-MD5SUM="25e73c67f24cf65fa0283018cf631f32"
-MAINTAINER="Robby Workman"
-EMAIL="rw@rlworkman.net"
-APPROVED="dsomero"