diff options
Diffstat (limited to 'system')
| -rw-r--r-- | system/virtualbox-ose/README | 38 | ||||
| -rw-r--r-- | system/virtualbox-ose/doinst.sh | 4 | ||||
| -rw-r--r-- | system/virtualbox-ose/virtualbox-ose.SlackBuild | 58 | ||||
| -rw-r--r-- | system/virtualbox-ose/virtualbox-ose.info | 6 |
4 files changed, 43 insertions, 63 deletions
diff --git a/system/virtualbox-ose/README b/system/virtualbox-ose/README index 1952e95230..184f4ebd20 100644 --- a/system/virtualbox-ose/README +++ b/system/virtualbox-ose/README @@ -2,20 +2,13 @@ VirtualBox Open Source Edition (OSE) is a general-purpose full virtualizer for x86 hardware. You'll probably want to add the following lines to your rc.local: - # Start vboxdrv if [ -x /etc/rc.d/rc.vboxdrv ]; then /etc/rc.d/rc.vboxdrv start fi - # Start vboxnet - if [ -x /etc/rc.d/rc.vboxnet ]; then - /etc/rc.d/rc.vboxnet start - fi - -This will load the support kernel module and will setup the network -configuration for VirtualBox. You should add similar "stop" lines to -your rc.local_shutdown. +This will load the support kernel module for VirtualBox. You should add +similar "stop" lines to your rc.local_shutdown. By default you have to create a vboxusers group, for example with groupadd -g 215 vboxusers @@ -33,16 +26,17 @@ If the VirtualBox Additions ISO is available in the same directory as the build script, it will be included in the package and placed under /usr/share/virtualbox/. Same goes for the UserManual They can be downloaded from: - http://download.virtualbox.org/virtualbox/2.0.6/VBoxGuestAdditions_2.0.6.iso - http://download.virtualbox.org/virtualbox/2.0.6/UserManual.pdf - -Since 2.0.0 there is a Qt4 GUI, which at this point of time is still a little -bit buggy and therefore disabled by default. To enable it pass QT4=yes -to the script. The Qt3 GUI is enabled by default, though that might -change with the next version as it is no longer maintained and likely -to be removed sometime soon. To disable it, pass QT3=no to the script. - -If you want pulseaudio support, you have to pass PULSE=yes to the -build script. Additionally VirtualBox requires acpica and dev86. The -virtualbox-kernel package is required at runtime. All dependencies -are available from SlackBuilds.org + http://download.virtualbox.org/virtualbox/2.1.4/VBoxGuestAdditions_2.1.4.iso + http://download.virtualbox.org/virtualbox/2.1.4/UserManual.pdf + +Since 2.0.0 there is a Qt4 GUI, which is enabled by default. To disable it pass +QT4=no to the script. An older, no longer maintained Qt3 GUI is also available +but disabled by default (no new features have been added to this since 2.0). +To enable it, pass QT3=yes to the script. +Beware: the Qt3 GUI has already been removed from svn trunk, and 2.2.0 will +only have a Qt4 GUI available. + +For pulseaudio support, pass PULSE=yes to the build script. This requires +pulseaudio to be installed. + +This requires acpica, and the virtualbox-kernel package is needed at runtime. diff --git a/system/virtualbox-ose/doinst.sh b/system/virtualbox-ose/doinst.sh index 478e3d3460..965ee68a04 100644 --- a/system/virtualbox-ose/doinst.sh +++ b/system/virtualbox-ose/doinst.sh @@ -1,5 +1,3 @@ -#!/bin/sh - config() { NEW="$1" OLD="$(dirname $NEW)/$(basename $NEW .new)" @@ -19,7 +17,7 @@ fi # Prepare the new configuration files config etc/vbox/vbox.cfg.new -for file in etc/rc.d/rc.vboxdrv.new etc/rc.d/rc.vboxnet.new ; do +for file in etc/rc.d/rc.vboxdrv.new ; do if [ -e $(dirname $file)/$(basename $file .new) -a -x $(dirname $file)/$(basename $file .new) ]; then chmod 0755 $file else diff --git a/system/virtualbox-ose/virtualbox-ose.SlackBuild b/system/virtualbox-ose/virtualbox-ose.SlackBuild index 90b1faef35..5251b92707 100644 --- a/system/virtualbox-ose/virtualbox-ose.SlackBuild +++ b/system/virtualbox-ose/virtualbox-ose.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for virtualbox-ose -# Copyright 2008 Heinz Wiesinger <pprkut@liwjatan.at> +# Copyright 2008-2009 Heinz Wiesinger <pprkut@liwjatan.at> # Copyright 2008 Mauro Giachero <mauro.giachero@gmail.com> # All rights reserved. # @@ -25,9 +25,9 @@ PRGNAM=virtualbox-ose SRCNAM=VirtualBox -VERSION=2.0.6 +VERSION=2.1.4 ARCH=${ARCH:-i486} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} TAG=${TAG:-_SBo} CWD=$(pwd) @@ -55,14 +55,13 @@ VBOXUSERS=${VBOXUSERS:-yes} if [ "$VBOXUSERS" = "yes" ]; then # Check for vboxusers group here if ! grep ^vboxusers: /etc/group 2>&1 > /dev/null; then - echo " Must have a vboxusers group to run this script." + echo " You must have a vboxusers group to run this script." echo " # groupadd -g 215 vboxusers" - echo " Or something similar." exit 1 fi fi -# Enable Hardeing - Defaulting to yes as requested by upstream +# Enable Hardening - Defaulting to yes as requested by upstream if [ "${HARDENING:-yes}" = "yes" ]; then harden="--enable-hardening" VBOXUSERS="yes" @@ -83,63 +82,60 @@ set -e rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP -rm -rf $SRCNAM-$VERSION -tar xvf $CWD/$SRCNAM-${VERSION}-OSE.tar.bz2 -cd $SRCNAM-$VERSION -patch -d src/VBox/Installer/linux -i $CWD/VBox.diff +rm -rf $SRCNAM-${VERSION}_OSE +tar xvf $CWD/$SRCNAM-${VERSION}-3-OSE.tar.bz2 +cd $SRCNAM-${VERSION}_OSE chown -R root:root . chmod -R u+w,go+r-w,a-s . +patch -d src/VBox/Installer/linux -i $CWD/VBox.diff + # The Innotek init script tries to set the device nodes' permissions. # This is problematic with VBOXUSERS=no, but you probably still want # this for security reasons when using the vboxusers-group if [ "$VBOXUSERS" = "yes" ]; then GROUP="vboxusers" MODE="750" - mkdir -p $PKG/etc/udev/rules.d + mkdir -p $PKG/lib/udev/rules.d echo 'KERNEL=="vboxdrv", NAME="vboxdrv", OWNER="root", GROUP="vboxusers", MODE="0660"' \ - > $PKG/etc/udev/rules.d/60-vboxdrv.rules + > $PKG/lib/udev/rules.d/60-vboxdrv.rules else patch -d src/VBox/Installer/linux -i $CWD/vboxdrv.sh.in.diff GROUP="root" MODE="755" - mkdir -p $PKG/etc/udev/rules.d + mkdir -p $PKG/lib/udev/rules.d echo 'KERNEL=="vboxdrv", NAME="vboxdrv", MODE="0666"' \ - > $PKG/etc/udev/rules.d/60-vboxdrv.rules + > $PKG/lib/udev/rules.d/60-vboxdrv.rules fi # Support for the qt3-frontend -if [ "${QT3:-yes}" = "yes" ]; then +if [ "${QT3:-no}" = "no" ]; then + qtgui+=" --disable-qt3" +else qtgui+=" --with-qt-dir=/usr/lib/qt" GUI+=" VirtualBox3" mkdir -p $PKG/usr/share/applications cp -f $CWD/VirtualBox3.desktop $PKG/usr/share/applications/ sed -i "s|\$VBOX_DOC_PATH|/usr/share/virtualbox|" \ $PKG/usr/share/applications/VirtualBox3.desktop -else - qtgui+=" --disable-qt3" fi # Support for the qt4-frontend -if [ "${QT4:-no}" = "no" ]; then - qtgui+=" --disable-qt4" -else +if [ "${QT4:-yes}" = "yes" ]; then GUI+=" VirtualBox" mkdir -p $PKG/usr/share/applications cp -f src/VBox/Installer/linux/VirtualBox.desktop $PKG/usr/share/applications/ sed -i "s|\$VBOX_DOC_PATH|/usr/share/virtualbox|" \ $PKG/usr/share/applications/VirtualBox.desktop +else + qtgui+=" --disable-qt4" fi -cd src/VBox/Frontends/VirtualBox - sed -i "s/VirtualBox3_QT_TRANSLATIONS/VirtualBox_QT_TRANSLATIONS/" \ - Makefile.kmk -cd - - CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --ose \ + --disable-kmods \ $harden \ $qtgui \ $do_pulse @@ -153,15 +149,13 @@ mkdir -p $PKG/usr/{lib,share}/virtualbox \ $PKG/usr/share/pixmaps \ $PKG/etc/{rc.d,vbox} -cp -f src/VBox/Installer/linux/vboxnet.sh.in $PKG/etc/rc.d/rc.vboxnet.new cp -f src/VBox/Installer/linux/vboxdrv.sh.in $PKG/etc/rc.d/rc.vboxdrv.new cp -f $CWD/vbox.cfg $PKG/etc/vbox/vbox.cfg.new -install -m $MODE -g $GROUP src/VBox/Installer/linux/VBoxAddIF.sh $PKG/usr/lib/virtualbox/VBoxTap cd out/linux.x86/release/bin/ - rm -f vboxdrv.ko + rm -f vboxdrv.ko VirtualBox.desktop mv VBox.png $PKG/usr/share/pixmaps/ - mv src $PKG/usr/src/vboxdrv-$VERSION + mv src $PKG/usr/src/virtualbox-kernel-$VERSION mv sdk nls* *.tar.gz $PKG/usr/share/virtualbox/ install -m $MODE -g $GROUP VBoxSysInfo.sh $PKG/usr/share/virtualbox/ install -m $MODE -g $GROUP VBoxTunctl $PKG/usr/bin/ @@ -176,12 +170,6 @@ for i in $GUI VBoxManage VBoxSDL VBoxHeadless VBoxVRDP; do ln -s /usr/lib/virtualbox/VBox $PKG/usr/bin/$i ; done -for i in VBoxAddIF VBoxDeleteIF; do - ln -s /usr/lib/virtualbox/VBoxTap $PKG/usr/bin/$i -done - -ln -s /usr/lib/virtualbox/vditool $PKG/usr/bin/vditool - if [ "$harden" = "--enable-hardening" ]; then for i in $GUI VBoxSDL VBoxHeadless; do chmod 4${MODE} $PKG/usr/lib/virtualbox/$i diff --git a/system/virtualbox-ose/virtualbox-ose.info b/system/virtualbox-ose/virtualbox-ose.info index b2cfe916b6..323fa24c7d 100644 --- a/system/virtualbox-ose/virtualbox-ose.info +++ b/system/virtualbox-ose/virtualbox-ose.info @@ -1,8 +1,8 @@ PRGNAM="virtualbox-ose" -VERSION="2.0.6" +VERSION="2.1.4" HOMEPAGE="http://www.virtualbox.org" -DOWNLOAD="http://download.virtualbox.org/virtualbox/2.0.6/VirtualBox-2.0.6-OSE.tar.bz2" -MD5SUM="455253532b5128bb5c2ff4c76b9751a7" +DOWNLOAD="http://download.virtualbox.org/virtualbox/2.1.4/VirtualBox-2.1.4-3-OSE.tar.bz2" +MD5SUM="54548336d61b33e2a01b210b314927cd" MAINTAINER="ppr:kut" EMAIL="pprkut@liwjatan.at" APPROVED="dsomero" |