5 files changed, 162 insertions, 0 deletions
diff --git a/system/motion/README b/system/motion/README
new file mode 100644
index 0000000000..6a8114e181
--- /dev/null
+++ b/system/motion/README
@@ -0,0 +1,16 @@
+Motion is a program that monitors the video signal from one or more
+cameras and is able to detect if a significant part of the picture
+has changed. Or in other words, it can detect motion.
+
+Motion is a command line based tool. It has no graphical user
+interface. Everything is setup via the command line or via a set of
+configuration files.
+
+Optional dependencies are ffmpeg and postgresql.
+
+Once installed, please be sure to read /usr/doc/motion-3.2.11/README for
+any configuration help. You will need to rename /etc/motion-dist.conf to 
+/etc/motion.conf once you have made the changes you deem necessary.
+
+This build has not been tested with the optional postgresql included, but
+you're welcome to give it a go!
diff --git a/system/motion/doinst.sh b/system/motion/doinst.sh
new file mode 100644
index 0000000000..282b54a44c
--- /dev/null
+++ b/system/motion/doinst.sh
@@ -0,0 +1,15 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/motion-dist.conf.new
+
diff --git a/system/motion/motion.SlackBuild b/system/motion/motion.SlackBuild
new file mode 100644
index 0000000000..d039cf6d30
--- /dev/null
+++ b/system/motion/motion.SlackBuild
@@ -0,0 +1,102 @@
+#!/bin/sh
+
+# Slackware build script for motion.
+#
+# Copyright 2009-2010 Pierre Cazenave <pwcazenave> {at} gmail [dot] com
+# Copyright 2007 Martin Lefebvre <dadexter@sekurity.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=motion
+VERSION=3.2.12
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+   SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+elif [ "$ARCH" = "x86_64" ]; then
+   SLKCFLAGS="-O2 -fPIC"
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+   -exec chmod 755 {} \; -o \
+   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+   -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+   --prefix=/usr \
+   --sysconfdir=/etc \
+   --mandir=/usr/man \
+   --localstatedir=/var \
+   --build=$ARCH-slackware-linux \
+   --host=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+( cd $PKG/usr/man
+   find . -type f -exec gzip -9 {} \;
+   for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Let's not clobber the config file
+mv $PKG/etc/motion-dist.conf $PKG/etc/motion-dist.conf.new
+
+mv $PKG/usr/share/doc $PKG/usr/doc
+mv $PKG/usr/share/$PRGNAM-$VERSION/examples $PKG/usr/doc/$PRGNAM-$VERSION/
+rm -rf $PKG/usr/share # We moved the docs from there
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/motion/motion.info b/system/motion/motion.info
new file mode 100644
index 0000000000..5da9427696
--- /dev/null
+++ b/system/motion/motion.info
@@ -0,0 +1,10 @@
+PRGNAM="motion"
+VERSION="3.2.12"
+HOMEPAGE="http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome"
+DOWNLOAD="http://sourceforge.net/projects/motion/files/motion%20-%203.2/motion-3.2.12.tar.gz"
+DOWNLOAD_x86_64=""
+MD5SUM="1ba0065ed50509aaffb171594c689f46"
+MD5SUM_x86_64=""
+MAINTAINER="Pierre Cazenave"
+EMAIL="pwcazenave <at> gmail {dot} com>"
+APPROVED="dsomero"
diff --git a/system/motion/slack-desc b/system/motion/slack-desc
new file mode 100644
index 0000000000..e090ba3621
--- /dev/null
+++ b/system/motion/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+motion: motion (software motion detector)
+motion:
+motion: Motion is a program that monitors the video signal from one or
+motion: more cameras and is able to detect if a significant part of the
+motion: picture has changed. Or in other words, it can detect motion.
+motion:
+motion: Motion is a command line based tool. It has no graphical user
+motion: interface. Everything is setup via the command line or via a set
+motion: of configuration files.
+motion:
+motion: http://www.lavrsen.dk/foswiki/bin/view/Motion/WebHome