5 files changed, 138 insertions, 0 deletions
diff --git a/system/etckeeper/README b/system/etckeeper/README
new file mode 100644
index 0000000000..c41e73f6d3
--- /dev/null
+++ b/system/etckeeper/README
@@ -0,0 +1,13 @@
+Etckeeper is a collection of tools to let /etc be stored in a git,
+mercurial, darcs, or bzr repository. It tracks file metadata that
+revison control systems do not normally support, but that is
+important for /etc, such as the permissions of /etc/shadow. It's
+quite modular and configurable, while also being simple to use if
+you understand the basics of working with revision control.
+
+Etckeeper will use git by default although you can change that in
+/etc/etckeeper/etckeeper.conf, assuming you have other version control
+tools installed. After installing etckeeper the first time you will
+need to run "etckeeper init" once to initialize the repository.
+
+bzr and darcs are optional dependencies.
diff --git a/system/etckeeper/doinst.sh b/system/etckeeper/doinst.sh
new file mode 100644
index 0000000000..1b2ea4b4ad
--- /dev/null
+++ b/system/etckeeper/doinst.sh
@@ -0,0 +1,14 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/etckeeper/etckeeper.conf.new
diff --git a/system/etckeeper/etckeeper.SlackBuild b/system/etckeeper/etckeeper.SlackBuild
new file mode 100644
index 0000000000..b2d762d1bd
--- /dev/null
+++ b/system/etckeeper/etckeeper.SlackBuild
@@ -0,0 +1,82 @@
+#!/bin/sh
+
+# Slackware build script for etckeeper
+
+# Copyright (c) 2013, David Sullins
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=etckeeper
+VERSION=${VERSION:-1.10}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+ -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# By default etckeeper is configured for an apt/dpkg based system. Change
+# that so it won't pollute /etc with files we don't need on Slackware.
+sed -i 's/apt$//g;s/dpkg$//g' ./etckeeper.conf
+
+make install DESTDIR=$PKG
+
+mv $PKG/etc/etckeeper/etckeeper.conf $PKG/etc/etckeeper/etckeeper.conf.new
+
+mv $PKG/usr/share/man $PKG/usr/man
+rmdir $PKG/usr/share
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  GPL INSTALL README TODO \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/etckeeper/etckeeper.info b/system/etckeeper/etckeeper.info
new file mode 100644
index 0000000000..52375890ad
--- /dev/null
+++ b/system/etckeeper/etckeeper.info
@@ -0,0 +1,10 @@
+PRGNAM="etckeeper"
+VERSION="1.10"
+HOMEPAGE="http://joeyh.name/code/etckeeper/"
+DOWNLOAD="https://github.com/joeyh/etckeeper/archive/1.10/etckeeper-1.10.tar.gz"
+MD5SUM="a89a6d4afb92d0a5a64b60f693fe64f9"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="David Sullins"
+EMAIL="david.sullins@gmail.com"
diff --git a/system/etckeeper/slack-desc b/system/etckeeper/slack-desc
new file mode 100644
index 0000000000..0a7ea93db8
--- /dev/null
+++ b/system/etckeeper/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+         |-----handy-ruler------------------------------------------------------|
+etckeeper: etckeeper (version control for /etc)
+etckeeper:
+etckeeper: etckeeper is a collection of tools to let /etc be stored in a git,
+etckeeper: mercurial, darcs, or bzr repository. It tracks file metadata that
+etckeeper: revison control systems do not normally support, but that is
+etckeeper: important for /etc, such as the permissions of /etc/shadow. It's
+etckeeper: quite modular and configurable, while also being simple to use if
+etckeeper: you understand the basics of working with revision control.
+etckeeper:
+etckeeper:
+etckeeper: homepage: http://joeyh.name/code/etckeeper