4 files changed, 144 insertions, 0 deletions
diff --git a/perl/perl-Image-Info/README b/perl/perl-Image-Info/README
new file mode 100644
index 0000000000..3068061bd9
--- /dev/null
+++ b/perl/perl-Image-Info/README
@@ -0,0 +1,3 @@
+perl-Image-Info extracts meta information from image files
+
+This is recommended with spamassassin.
diff --git a/perl/perl-Image-Info/perl-Image-Info.SlackBuild b/perl/perl-Image-Info/perl-Image-Info.SlackBuild
new file mode 100644
index 0000000000..cd2f64c9e9
--- /dev/null
+++ b/perl/perl-Image-Info/perl-Image-Info.SlackBuild
@@ -0,0 +1,112 @@
+#!/bin/sh
+
+# Slackware Package Build Script for perl modules: Image::Info
+# Home Page http://search.cpan.org/dist/Image-Info/
+
+# Copyright (c) 2009-2010, Nishant Limbachia, Hoffman Estates, IL, USA
+# (nishant _AT_ mnspace _DOT_ net)
+# All rights reserved.
+
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+
+# 1. Redistributions of script must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Modified by the SlackBuilds.org project.
+
+SRCNAM=Image-Info
+PRGNAM=perl-$SRCNAM
+VERSION=${VERSION:-1.31}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e
+
+DOCS="CHANGES README"
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -fr $TMP/$SRCNAM-$VERSION $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $TMP/$SRCNAM-$VERSION
+chown -R root.root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor INSTALLVENDORMAN3DIR=/usr/man/man3
+
+make
+make install DESTDIR=$PKG
+
+### putting essential docs
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+# Remove perlocal.pod and .packlist from $PKG
+( cd $PKG
+  find . -name "perllocal.pod" -o -name ".packlist"  -o -name "*.bs"  | xargs rm -f
+)
+
+# Remove empty directories
+find $PKG -depth -type d -empty -exec rm -rf {} \;
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+( cd $PKG/usr/man
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/perl/perl-Image-Info/perl-Image-Info.info b/perl/perl-Image-Info/perl-Image-Info.info
new file mode 100644
index 0000000000..36e9ead907
--- /dev/null
+++ b/perl/perl-Image-Info/perl-Image-Info.info
@@ -0,0 +1,10 @@
+PRGNAM="perl-Image-Info"
+VERSION="1.31"
+HOMEPAGE="http://search.cpan.org/dist/Image-Info/"
+DOWNLOAD="http://search.cpan.org/CPAN/authors/id/S/SR/SREZIC/Image-Info-1.31.tar.gz"
+MD5SUM="4c5fa82385643e5153aa76090be0bbf4"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Nishant Limbachia"
+EMAIL="nishant@mnspace.net"
+APPROVED="dsomero"
diff --git a/perl/perl-Image-Info/slack-desc b/perl/perl-Image-Info/slack-desc
new file mode 100644
index 0000000000..90ff979930
--- /dev/null
+++ b/perl/perl-Image-Info/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+perl-Image-Info: perl-Image-Info (Image::Info)
+perl-Image-Info:
+perl-Image-Info: perl-Image-Info extracts meta information from image files.
+perl-Image-Info:
+perl-Image-Info:
+perl-Image-Info:
+perl-Image-Info: Homepage: http://search.cpan.org/dist/Image-Info/
+perl-Image-Info:
+perl-Image-Info:
+perl-Image-Info:
+perl-Image-Info: