5 files changed, 0 insertions, 162 deletions
diff --git a/network/ebtables/README b/network/ebtables/README
deleted file mode 100644
index 6dba3d2098..0000000000
--- a/network/ebtables/README
+++ /dev/null
@@ -1,10 +0,0 @@
-The ebtables program is a filtering tool for a Linux-based bridging firewall. It
-enables transparent filtering of network traffic passing through a Linux bridge.
-The filtering possibilities are limited to link layer filtering and some basic
-filtering on higher network layers. Advanced logging, MAC DNAT/SNAT and brouter
-facilities are also included.
-
-The ebtables tool can be combined with the other Linux filtering tools (iptables,
-ip6tables and arptables) to make a bridging firewall that is also capable of
-filtering these higher network layers. This is enabled through the
-bridge-netfilter architecture which is a part of the standard Linux kernel.
diff --git a/network/ebtables/doinst.sh b/network/ebtables/doinst.sh
deleted file mode 100644
index 092a869b6b..0000000000
--- a/network/ebtables/doinst.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-config etc/ethertypes.new
-
diff --git a/network/ebtables/ebtables.SlackBuild b/network/ebtables/ebtables.SlackBuild
deleted file mode 100644
index 758a3521a5..0000000000
--- a/network/ebtables/ebtables.SlackBuild
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for ebtables
-
-# Copyright 2011, mario <mario@slackverse.org>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=ebtables
-VERSION=${VERSION:-2.0.10}
-BUILD=${BUILD:-3}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-v$VERSION-4
-tar xvf $CWD/$PRGNAM-v$VERSION-4.tar.gz
-cd $PRGNAM-v$VERSION-4
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Set our CFLAGS and avoid a "warning-as-error" that breaks build
-sed -i \
-  -e "s|-fPIC -O3|${SLKCFLAGS}|" \
-  -e "s|-Wunused|-Wno-error=unused-but-set-variable|" \
-  Makefile
-
-make
-
-make install DESTDIR=$PKG \
-LIBDIR=/usr/lib${LIBDIRSUFFIX} \
-MANDIR=/usr/man \
-BINDIR=/usr/sbin \
-ETCDIR=/etc \
-INITDIR=/etc/rc.d/init.d \
-SYSCONFIGDIR=/etc/sysconfig
-
-find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-mv $PKG/etc/ethertypes $PKG/etc/ethertypes.new
-
-# Remove Red Hat junk
-rm -rf $PKG/etc/rc.d $PKG/etc/sysconfig
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a COPYING ChangeLog INSTALL THANKS $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh  > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/ebtables/ebtables.info b/network/ebtables/ebtables.info
deleted file mode 100644
index e929269cfc..0000000000
--- a/network/ebtables/ebtables.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="ebtables"
-VERSION="2.0.10"
-HOMEPAGE="http://ebtables.sourceforge.net/"
-DOWNLOAD="http://downloads.sourceforge.net/ebtables/ebtables-v2.0.10-4.tar.gz"
-MD5SUM="506742a3d44b9925955425a659c1a8d0"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="mario"
-EMAIL="mario@slackverse.org"
diff --git a/network/ebtables/slack-desc b/network/ebtables/slack-desc
deleted file mode 100644
index eedf63c699..0000000000
--- a/network/ebtables/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-        |-----handy-ruler------------------------------------------------------|
-ebtables: ebtables (Ethernet frame filtering on a Linux bridge)
-ebtables:
-ebtables: The ebtables utility enables basic Ethernet frame filtering on a
-ebtables: Linux bridge, logging, MAC NAT and brouting. It only provides basic
-ebtables: IP filtering, the full-fledged IP filtering on a Linux bridge is
-ebtables: done with iptables.
-ebtables:
-ebtables: Homepage: http://ebtables.sourceforge.net/
-ebtables:
-ebtables:
-ebtables: