7 files changed, 0 insertions, 302 deletions
diff --git a/network/zarafa/README b/network/zarafa/README
deleted file mode 100644
index 80323e18ed..0000000000
--- a/network/zarafa/README
+++ /dev/null
@@ -1,7 +0,0 @@
-Zarafa offers a replacement for MS Exchange Server, providing
-Outlook "Look & Feel" webaccess, integration with Linux mailservers,
-mobile phone support, Outlook sharing (100% MAPI) etc.
-
-If you want to upgrade a zarafa 6.x.y database, you will need the
-zarafa7-upgrade tool, which needs the optional dependency
-MySQL-python.
diff --git a/network/zarafa/README.Slackware b/network/zarafa/README.Slackware
deleted file mode 100644
index 569141b247..0000000000
--- a/network/zarafa/README.Slackware
+++ /dev/null
@@ -1,81 +0,0 @@
-README.Slackware
-================
-
-This document gives some basic instructions on setting up Zarafa on Slackware
-
-1) Prepare your MySQL server
-----------------------------
-
-On your MySQL server, enter with an account with full privileges:
-
-  # mysql -u <your_account> -p<your_password>
-
-In MySQL, create the database and user:
-
-  mysql> create database zarafa;
-  mysql> grant all privileges on zarafa.* to zarafa@<your_server> identified by 'zarafa';
-  mysql> flush privileges;
-  mysql> quit
-
-You can change the name of the user and password as you please.
-
-2) Edit Zarafa configuration files
-----------------------------------
-
-The sample configuration files are installed in /etc/zarafa/
-There are files for the server, spooler, gateway, etc.
-
-Change at least the file server.cfg to the correct values for your MySQL
-server:
-
-  mysql_host		(can be localhost if mysql is on the same box)
-  mysql_user		(default is root, not a good idea)
-  mysql_password
-
-3) Starting and stopping services
----------------------------------
-
-For all services a /etc/rc.d/rc.zarafa-* script is installed.
-To start a particular service, make the script executable and include a few
-lines in your /etc/rc.d/rc.local and /etc/rc.d/rc.local_shutdown script.
-
-As an example for the zarafa-server:
-
-  # chmod +x /etc/rc.d/rc.zarafa-server
-
-Include the following lines in /etc/rc.d/rc.local, they will check all
-scripts related to zarafa and start them if the executable bit is set:
-
-  for z in server spooler gateway dagent ical monitor indexer ; do
-    if [ -x /etc/rc.d/rc.zarafa-$z ]; then
-      /etc/rc.d/rc.zarafa-$z start
-    fi
-  done
-
-To stop them at shutting down your server, include these lines in
-/etc/rc.d/rc.local_shutdown:
-
-  for z in indexer monitor ical dagent gateway spooler server ; do
-    if [ -x /etc/rc.d/rc.zarafa-$z ]; then
-      /etc/rc.d/rc.zarafa-$z stop
-    fi
-  done
-
-4) Creating "public store"
---------------------------
-
-To create the public store of shared folders, use:
-
-  # zarafa-admin -s
-
-5) Where to go from here
-------------------------
-
-With these steps, you have concluded the basic setup of Zarafa. For web
-access, install the zarafa-webaccess-ajax package.
-
-More documentation is available in the man-pages and from the Zarafa site:
-http://www.zarafa.com/content/documentation
-On this site, several manuals (including some translations) and whitepapers
-can be downloaded.
-
diff --git a/network/zarafa/doinst.sh b/network/zarafa/doinst.sh
deleted file mode 100644
index ab8d7de91d..0000000000
--- a/network/zarafa/doinst.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-preserve_perms() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  if [ -e $OLD ]; then
-    cp -a $OLD ${NEW}.incoming
-    cat $NEW > ${NEW}.incoming
-    mv ${NEW}.incoming $NEW
-  fi
-  config $NEW
-}
-
-for cnf in etc/zarafa/*.cfg.new; do
-  config $cnf
-done
-
-for rc in etc/rc.d/rc.zarafa-*.new; do
-  preserve_perms $rc
-done
-
diff --git a/network/zarafa/gcc47.patch b/network/zarafa/gcc47.patch
deleted file mode 100644
index 0fff552d50..0000000000
--- a/network/zarafa/gcc47.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -Naur zarafa-7.1.0.orig/inetmapi/outputStreamMAPIAdapter.h zarafa-7.1.0/inetmapi/outputStreamMAPIAdapter.h
---- zarafa-7.1.0.orig/inetmapi/outputStreamMAPIAdapter.h	2012-08-08 17:14:57.000000000 +0200
-+++ zarafa-7.1.0/inetmapi/outputStreamMAPIAdapter.h	2012-09-13 19:37:26.072059371 +0200
-@@ -51,6 +51,7 @@
- #define OUTPUT_STREAM_MAPI_ADAPTER_H
- 
- #include "mapidefs.h"
-+#include <unistd.h>
- #include <vmime/utility/stream.hpp>
- 
- class outputStreamMAPIAdapter : public vmime::utility::outputStream {
diff --git a/network/zarafa/slack-desc b/network/zarafa/slack-desc
deleted file mode 100644
index 2a3f5c465f..0000000000
--- a/network/zarafa/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-      |-----handy-ruler------------------------------------------------------|
-zarafa: zarafa (MS Exchange replacement)
-zarafa:
-zarafa: Zarafa offers a replacement for MS Exchange Server, providing
-zarafa: Outlook "Look & Feel" webaccess, integration with Linux mailservers,
-zarafa: mobile phone support, Outlook sharing (100% MAPI) etc.
-zarafa:
-zarafa: http://www.zarafa.com/
-zarafa:
-zarafa:
-zarafa:
-zarafa:
diff --git a/network/zarafa/zarafa.SlackBuild b/network/zarafa/zarafa.SlackBuild
deleted file mode 100644
index 7a9b6f8949..0000000000
--- a/network/zarafa/zarafa.SlackBuild
+++ /dev/null
@@ -1,142 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for zarafa:
-# an MS Exchange substitute
-
-# Copyright 2009-2011  Niels Horn, Rio de Janeiro, RJ, Brazil
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# revision date 2011/09/16
-
-PRGNAM=zarafa
-VERSION=${VERSION:-7.1.0}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-SRCNAM=zcp
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $TMP/$PRGNAM-$VERSION $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-chmod -R u+w,go+r-w,a-s .
-
-# With gcc-4.7.x we need a little patch
-patch -p1 < $CWD/gcc47.patch
-
-VMIME_LIBS="-lvmime_zarafa" \
-VMIME_CFLAGS="-I/usr/include/vmime_zarafa" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --sysconfdir=/etc \
-  --disable-static \
-  --enable-icu \
-  --with-userscript-prefix=/etc/zarafa/userscripts \
-  --with-quotatemplate-prefix=/etc/zarafa/quotamails \
-  --with-vmime-prefix=/usr/include/vmime_zarafa \
-  --with-clucene-lib-prefix=/usr/lib${LIBDIRSUFFIX} \
-  --build=$ARCH-slackware-linux
-
-# Use our CFLAGS
-for mf in $(find . -name Makefile); do
-  sed -i "/^C[X]*[X]*FLAGS/s/=/+=/" $mf
-done
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-  make
-make install DESTDIR=$PKG
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-# Rename cfg files to .new
-for cfg in $PKG/etc/$PRGNAM/*.cfg; do
-  mv $cfg $cfg.new
-done
-
-# The doc of zarafa-gateway ends up in the wrong directory somehow...
-mv $PKG/usr/doc/zarafa-gateway/* $PKG/usr/doc/$PRGNAM-$VERSION/
-rmdir $PKG/usr/doc/zarafa-gateway
-
-# Remove sysconfig files. We don't use them and they only set the collation,
-# which is taken care of in the rc.* scripts as well
-rm -rf $PKG/etc/sysconfig
-
-# Move /etc/init.d scripts to /etc/rc.d with the correct naming
-mkdir -p $PKG/etc/rc.d
-for script in $PKG/etc/init.d/*; do
-  rc=$(basename $script)
-  mv $script $PKG/etc/rc.d/rc.$rc.new
-  chmod -x $PKG/etc/rc.d/rc.$rc.new
-done
-rm -rf $PKG/etc/init.d
-
-# Directory for log file
-mkdir -p $PKG/var/log/$PRGNAM
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-cat $CWD/README.Slackware > $PKG/usr/doc/$PRGNAM-$VERSION/README.Slackware
-
-mkdir -p $PKG/install
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/zarafa/zarafa.info b/network/zarafa/zarafa.info
deleted file mode 100644
index 14d0b6aba4..0000000000
--- a/network/zarafa/zarafa.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="zarafa"
-VERSION="7.1.0"
-HOMEPAGE="http://www.zarafa.com/"
-DOWNLOAD="http://download.zarafa.com/community/final/7.1/7.1.0-36420/sourcecode/zcp-7.1.0.tar.gz"
-MD5SUM="7c8ecdd77e6e4c8c0644e2e6e8d9e332"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES="kyotocabinet libvmime-zarafa"
-MAINTAINER="Niels Horn"
-EMAIL="niels.horn@gmail.com"