6 files changed, 0 insertions, 186 deletions
diff --git a/network/btsync/README b/network/btsync/README
deleted file mode 100644
index 1185cd1890..0000000000
--- a/network/btsync/README
+++ /dev/null
@@ -1,9 +0,0 @@
-BitTorrent Sync easily moves anything, anywhere - all the benefits of the cloud,
-none of the limitations. Available for Windows, Mac, Linux, iOS, and Android.
-
-To start automatic at boot make /etc/rc.d/rc.btsync executable:
-chmod +x /etc/rc.d/rc.btsync
-and add it to /etc/rc.d/rc.local
-btsync will then be started as root using /etc/btsync.conf as config.
-
-Use your browser to configure btsync: http://ip.address:8888/
diff --git a/network/btsync/btsync.SlackBuild b/network/btsync/btsync.SlackBuild
deleted file mode 100644
index 878f2634b9..0000000000
--- a/network/btsync/btsync.SlackBuild
+++ /dev/null
@@ -1,94 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for btsync
-
-# Copyright 2014 Philip van der Hoeven Almere The Netherlands
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=btsync
-SRCNAM=BitTorrent-Sync
-VERSION=${VERSION:-2.3.7}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-if [ "$ARCH" = "i486" ]; then
-	FARCH=i386
-elif [ "$ARCH" = "x86_64" ]; then
-	FARCH=x64
-else
-	echo "Only i386 and x86_64 architectures are supported..."
-	exit 1
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-mkdir $PRGNAM-$VERSION
-cd $PRGNAM-$VERSION
-tar xvf $CWD/${SRCNAM}_$FARCH.tar.gz
-chown -R root:root .
-find -L . \
- \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
-  -o -perm 511 \) -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
-  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
-
-# Install btsync
-mkdir -p $PKG/usr/bin
-install -Dm755 btsync $PKG/usr/bin/btsync
-
-# Install rc script
-mkdir -p $PKG/etc/rc.d
-cat $CWD/rc.btsync > $PKG/etc/rc.d/rc.btsync.new
-
-# Generate config file
-./btsync --dump-sample-config \
-	| sed 's@// "storage_path" : "/home/user/.sync"@"storage_path" : "/var/lib/btsync"@' \
-	| sed 's@// "pid_file"@  "pid_file"@' > $PKG/etc/btsync.conf.new
-
-mkdir -p $PKG/var/lib/btsync
-mkdir -p $PKG/var/run/btsync
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a README LICENSE.TXT $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/btsync/btsync.info b/network/btsync/btsync.info
deleted file mode 100644
index 1d4e5cc2a5..0000000000
--- a/network/btsync/btsync.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="btsync"
-VERSION="2.3.7"
-HOMEPAGE="http://www.getsync.com"
-DOWNLOAD="http://slackware.uk/sbosrcarch/by-name/network/btsync/BitTorrent-Sync_i386.tar.gz"
-MD5SUM="9b04ae3fb56a09f28bfd107f375fcbe5"
-DOWNLOAD_x86_64="http://slackware.uk/sbosrcarch/by-name/network/btsync/BitTorrent-Sync_x64.tar.gz"
-MD5SUM_x86_64="ee773c100fce0c50b477ca9703cfe771"
-REQUIRES=""
-MAINTAINER="Philip van der Hoeven"
-EMAIL="philip@vd-hoeven.nl"
diff --git a/network/btsync/doinst.sh b/network/btsync/doinst.sh
deleted file mode 100644
index 2b138413f8..0000000000
--- a/network/btsync/doinst.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="`dirname $NEW`/`basename $NEW .new`"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-preserve_perms() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  if [ -e $OLD ]; then
-    cp -a $OLD ${NEW}.incoming
-    cat $NEW > ${NEW}.incoming
-    mv ${NEW}.incoming $NEW
-  fi
-  config $NEW
-}
-
-config etc/btsync.conf.new
-preserve_perms etc/rc.d/rc.btsync.new
diff --git a/network/btsync/rc.btsync b/network/btsync/rc.btsync
deleted file mode 100644
index 71bf757e16..0000000000
--- a/network/btsync/rc.btsync
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-#
-# btsync start script
-
-case "$1" in
-	stop)
-		PID=/var/run/btsync/btsync.pid
-		if [ -f $PID ]; then
-        		echo "Stop BitTorrent Sync..."
-        		kill "`cat /var/run/btsync/btsync.pid`"
-		else
-			echo "BitTorrent Sync is not running..."
-			exit 1
-		fi
-        	;;
-	start)
-        	echo "Start BitTorrent Sync..."
-        	/usr/bin/btsync --config /etc/btsync.conf
-        	;;
-	restart)
-        	$0 stop
-        	sleep 1
-        	$0 start
-        	;;
-	*)
-        	echo "usage: $0 { start | stop | restart }" >&2
-        	exit 1
-        	;;
-esac
diff --git a/network/btsync/slack-desc b/network/btsync/slack-desc
deleted file mode 100644
index 3b6eb05b70..0000000000
--- a/network/btsync/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-      |-----handy-ruler------------------------------------------------------|
-btsync: btsync (sync files between your own devices)
-btsync:
-btsync: Sync easily moves anything, anywhere - all the benefits of the cloud,
-btsync: none of the limitations. Available for Windows, Mac, Linux, iOS,
-btsync: and Android.
-btsync:
-btsync: http://www.getsync.com
-btsync:
-btsync:
-btsync:
-btsync: