summaryrefslogtreecommitdiff
path: root/network
diff options
context:
space:
mode:
Diffstat (limited to 'network')
-rw-r--r--network/xinetd/README22
-rw-r--r--network/xinetd/doinst.sh34
-rw-r--r--network/xinetd/rc.xinetd103
-rw-r--r--network/xinetd/slack-desc19
-rw-r--r--network/xinetd/xinetd-2.3.14-add_destdir.patch48
-rw-r--r--network/xinetd/xinetd.SlackBuild125
-rw-r--r--network/xinetd/xinetd.info10
7 files changed, 361 insertions, 0 deletions
diff --git a/network/xinetd/README b/network/xinetd/README
new file mode 100644
index 0000000000..8c50f8775b
--- /dev/null
+++ b/network/xinetd/README
@@ -0,0 +1,22 @@
+Xinetd is a powerful inetd replacement. Xinetd has access control mechanisms,
+extensive logging capabilities, the ability to make services available based
+on time, can place limits on the number of servers that can be started,
+and has a configurable defence mechanisms to protect against port scanners,
+among other things.
+
+Before starting xinetd, you may wish to switch inetd off if it is running.
+To do this:
+
+Do a "ps x" as root and look up the pid of inetd. Then do "kill <pid of inetd>"
+
+Stop inetd from starting at boot: chmod 0644 /etc/rc.d/rc.inetd
+Start xinetd on boot by adding the following lines to /etc/rc.d/rc.local:
+
+ if [ ! -x /etc/rc.d/rc.inetd ] && [ -x /etc/rc.d/rc.xinetd ]; then
+ /etc/rc.d/rc.xinetd start
+ fi
+Ensure that /etc/rc.d/{rc.local,rc.xinetd} have executable permissions.
+
+Alternatively, you can avoid all of the edits to rc.local:
+mv /etc/rc.d/rc.xinetd /etc/rc.d/rc.inetd
+
diff --git a/network/xinetd/doinst.sh b/network/xinetd/doinst.sh
new file mode 100644
index 0000000000..1f9319c35c
--- /dev/null
+++ b/network/xinetd/doinst.sh
@@ -0,0 +1,34 @@
+config() {
+ NEW="$1"
+ OLD="$(dirname $NEW)/$(basename $NEW .new)"
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+ rm $NEW
+ fi
+}
+preserve_perms() {
+ NEW="$1"
+ OLD="$(dirname $NEW)/$(basename $NEW .new)"
+ if [ -e $OLD ]; then
+ cp -a $OLD ${NEW}.incoming
+ cat $NEW > ${NEW}.incoming
+ mv ${NEW}.incoming $NEW
+ fi
+ config $NEW
+}
+config etc/xinetd.conf.new
+config etc/xinetd.d/chargen-dgram.new
+config etc/xinetd.d/chargen-stream.new
+config etc/xinetd.d/daytime-dgram.new
+config etc/xinetd.d/daytime-stream.new
+config etc/xinetd.d/discard-dgram.new
+config etc/xinetd.d/discard-stream.new
+config etc/xinetd.d/echo-dgram.new
+config etc/xinetd.d/echo-stream.new
+config etc/xinetd.d/ftp-sensor.new
+config etc/xinetd.d/tcpmux-server.new
+config etc/xinetd.d/time-dgram.new
+config etc/xinetd.d/time-stream.new
+preserve_perms etc/rc.d/rc.xinetd.new
+
diff --git a/network/xinetd/rc.xinetd b/network/xinetd/rc.xinetd
new file mode 100644
index 0000000000..44f153b1ba
--- /dev/null
+++ b/network/xinetd/rc.xinetd
@@ -0,0 +1,103 @@
+#!/bin/sh
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+RETVAL=0
+
+start(){
+ echo "Starting xinetd: /usr/sbin/xinetd -stayalive -reuse -pidfile /var/run/xinetd.pid "
+ # Need to get rid of localization for external services -
+ # it doesn't make much sense to have i18n on the server side here
+ LANG=en_US
+ LC_TIME=en_US
+ LC_ALL=en_US
+ LC_MESSAGES=en_US
+ LC_NUMERIC=en_US
+ LC_MONETARY=en_US
+ LC_COLLATE=en_US
+ export LANG LC_TIME LC_ALL LC_MESSAGES LC_NUMERIC LC_MONETARY LC_COLLATE
+ unset HOME MAIL USER USERNAME
+ /usr/sbin/xinetd -stayalive -reuse -pidfile /var/run/xinetd.pid
+ RETVAL=$?
+ [ "$RETVAL" = 0 ] && touch /var/lock/subsys/xinetd
+ return $RETVAL
+}
+
+stop(){
+ echo "Stopping xinetd... "
+ killall xinetd 2>/dev/null
+ RETVAL=$?
+ rm -f /var/lock/subsys/xinetd
+ return $RETVAL
+}
+
+restart(){
+ stop
+ sleep 1
+ start
+}
+
+reload(){
+ echo "Reloading xinetd configuration..."
+ killall -HUP xinetd 2>/dev/null
+ return $?
+}
+
+dump(){
+ echo -n $"Dumping configuration: "
+ killall -USR1 xinetd
+ RETVAL=$?
+ echo
+ return $RETVAL
+}
+
+check(){
+ echo $"Performing Consistency Check: "
+ /bin/kill -s IOT xinetd
+ RETVAL=$?
+ return $RETVAL
+}
+
+status(){
+ echo -n $"Checking xinetd: "
+ /bin/kill -s IOT xinetd 2>/dev/null
+ RETVAL=$?
+ if [ $RETVAL = 0 ]; then
+ echo "xinetd is running"
+ else
+ echo "xinetd is not running"
+ fi
+ return $RETVAL
+}
+
+# See how we were called.
+case "$1" in
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ restart)
+ restart
+ ;;
+ reload)
+ reload
+ ;;
+ dump)
+ dump
+ ;;
+ check)
+ check
+ ;;
+ status)
+ status
+ ;;
+ *)
+ echo $"Usage: $0 {start|stop|restart|reload|dump|check|status}"
+ RETVAL=1
+esac
+
+exit $RETVAL
+
+
diff --git a/network/xinetd/slack-desc b/network/xinetd/slack-desc
new file mode 100644
index 0000000000..96239399df
--- /dev/null
+++ b/network/xinetd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+ |------handy-ruler------------------------------------------------------|
+xinetd: xinetd -- A better inetd
+xinetd:
+xinetd: Xinetd is a powerful inetd replacement. Xinetd has access control
+xinetd: mechanisms, extensive logging capabilities, the ability to make
+xinetd: services available based on time, can place limits on the number of
+xinetd: servers that can be started, and has a configurable defence mechanisms
+xinetd: to protect against port scanners, among other things.
+xinetd:
+xinetd: Homepage: http://xinetd.org
+xinetd:
+
diff --git a/network/xinetd/xinetd-2.3.14-add_destdir.patch b/network/xinetd/xinetd-2.3.14-add_destdir.patch
new file mode 100644
index 0000000000..6504ef07d6
--- /dev/null
+++ b/network/xinetd/xinetd-2.3.14-add_destdir.patch
@@ -0,0 +1,48 @@
+diff -Nur xinetd-2.3.14.orig//Makefile.in xinetd-2.3.14/Makefile.in
+--- xinetd-2.3.14.orig//Makefile.in 2003-08-15 09:00:45.000000000 -0500
++++ xinetd-2.3.14/Makefile.in 2010-11-24 23:45:57.615587280 -0600
+@@ -75,27 +75,27 @@
+
+ install: build
+ for i in $(DAEMONDIR) $(BINDIR) $(MANDIR)/man5 $(MANDIR)/man8 ; do \
+- test -d $$i || mkdir -p $$i ; done
+- $(INSTALL_CMD) -m 755 xinetd/xinetd $(DAEMONDIR)
+- $(INSTALL_CMD) -m 755 xinetd/itox $(DAEMONDIR)
+- $(INSTALL_CMD) -m 755 $(SRCDIR)/xinetd/xconv.pl $(DAEMONDIR)
+- $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.conf.man $(MANDIR)/man5/xinetd.conf.5
+- $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.log.man $(MANDIR)/man8/xinetd.log.8
+- $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.man $(MANDIR)/man8/xinetd.8
+- $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/itox.8 $(MANDIR)/man8/itox.8
+- $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xconv.pl.8 $(MANDIR)/man8/xconv.pl.8
++ test -d $(DESTDIR)/$$i || mkdir -p $(DESTDIR)/$$i ; done
++ $(INSTALL_CMD) -m 755 xinetd/xinetd $(DESTDIR)/$(DAEMONDIR)
++ $(INSTALL_CMD) -m 755 xinetd/itox $(DESTDIR)/$(DAEMONDIR)
++ $(INSTALL_CMD) -m 755 $(SRCDIR)/xinetd/xconv.pl $(DESTDIR)/$(DAEMONDIR)
++ $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.conf.man $(DESTDIR)/$(MANDIR)/man5/xinetd.conf.5
++ $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.log.man $(DESTDIR)/$(MANDIR)/man8/xinetd.log.8
++ $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xinetd.man $(DESTDIR)/$(MANDIR)/man8/xinetd.8
++ $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/itox.8 $(DESTDIR)/$(MANDIR)/man8/itox.8
++ $(INSTALL_CMD) -m 644 $(SRCDIR)/xinetd/xconv.pl.8 $(DESTDIR)/$(MANDIR)/man8/xconv.pl.8
+ @echo "You must put your xinetd.conf in /etc/xinetd.conf"
+ @echo "There is a sample config file in xinetd/sample.conf and you can"
+ @echo "use xconv.pl to convert your old inetd.conf file to an xinetd format"
+
+ uninstall:
+- rm -f $(DAEMONDIR)/xinetd
+- rm -f $(DAEMONDIR)/itox
+- rm -f $(DAEMONDIR)/xconv.pl
+- rm -f $(MANDIR)/man5/xinetd.conf.5
+- rm -f $(MANDIR)/man8/xinetd.log.8
+- rm -f $(MANDIR)/man8/xinetd.8
+- rm -f $(MANDIR)/man8/itox.8
++ rm -f $(DESTDIR)/$(DAEMONDIR)/xinetd
++ rm -f $(DESTDIR)/$(DAEMONDIR)/itox
++ rm -f $(DESTDIR)/$(DAEMONDIR)/xconv.pl
++ rm -f $(DESTDIR)/$(MANDIR)/man5/xinetd.conf.5
++ rm -f $(DESTDIR)/$(MANDIR)/man8/xinetd.log.8
++ rm -f $(DESTDIR)/$(MANDIR)/man8/xinetd.8
++ rm -f $(DESTDIR)/$(MANDIR)/man8/itox.8
+
+ distclean: clean
+ rm -f config.cache config.log Makefile config.status xinetd/itox
+
diff --git a/network/xinetd/xinetd.SlackBuild b/network/xinetd/xinetd.SlackBuild
new file mode 100644
index 0000000000..7298ba7179
--- /dev/null
+++ b/network/xinetd/xinetd.SlackBuild
@@ -0,0 +1,125 @@
+#!/bin/sh
+
+# Slackware build script for xinetd
+
+# Copyright 2010 Chris Abela <chris.abela@maltats.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=xinetd
+VERSION=${VERSION:-2.3.14}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+ case "$( uname -m )" in
+ i?86) ARCH=i486 ;;
+ arm*) ARCH=arm ;;
+ *) ARCH=$( uname -m ) ;;
+ esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+ SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+ LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+ SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+ LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+ SLKCFLAGS="-O2 -fPIC"
+ LIBDIRSUFFIX="64"
+else
+ SLKCFLAGS="-O2"
+ LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Add DESTDIR support
+patch -p1 < $CWD/xinetd-2.3.14-add_destdir.patch
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+ --prefix=/usr \
+ --libdir=/usr/lib${LIBDIRSUFFIX} \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --mandir=/usr/man \
+ --with-libwrap \
+ --with-loadavg \
+ --build=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+# Install config files
+mkdir -p $PKG/etc/xinetd.d/
+cat contrib/xinetd.conf > $PKG/etc/xinetd.conf.new
+for file in contrib/xinetd.d/* ; do
+ cat $file > $PKG/etc/xinetd.d/$(basename $file).new ;
+done
+
+# Install the Slackware init script
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.xinetd > $PKG/etc/rc.d/rc.xinetd.new
+chmod 0755 $PKG/etc/rc.d/rc.xinetd.new
+
+# Make sure /var/lock/subsys exists and keeps correct permissions
+mkdir -p $PKG/var/lock/subsys
+chmod 1777 $PKG/var/lock
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+ AUDIT CHANGELOG COPYRIGHT INSTALL README TODO contrib \
+ $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
+
diff --git a/network/xinetd/xinetd.info b/network/xinetd/xinetd.info
new file mode 100644
index 0000000000..34fea9b675
--- /dev/null
+++ b/network/xinetd/xinetd.info
@@ -0,0 +1,10 @@
+PRGNAM="xinetd"
+VERSION="2.3.14"
+HOMEPAGE="http://xinetd.org"
+DOWNLOAD="http://xinetd.org/xinetd-2.3.14.tar.gz"
+MD5SUM="567382d7972613090215c6c54f9b82d9"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Chris Abela"
+EMAIL="chris.abela@maltats.com"
+APPROVED="rworkman"
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-30 03:33:32 +0000