diff options
Diffstat (limited to 'network/netqmail')
22 files changed, 1191 insertions, 0 deletions
diff --git a/network/netqmail/LWQ_scripts/inst_check b/network/netqmail/LWQ_scripts/inst_check new file mode 100644 index 0000000000..dec4627ccc --- /dev/null +++ b/network/netqmail/LWQ_scripts/inst_check @@ -0,0 +1,305 @@ +#!/bin/sh + +# Dave Sill, 2003-11-10 +# http://lifewithqmail.org/inst_check + +# set to n if you're not running a pop3 server, y if you are +CHECKPOP=n + +QMHOME=/var/qmail +LBIN=/usr/bin + +OK=1 + +if [ $# -eq 1 ]; then + if [ "$1" = "-v" ]; then + VERB=y + else + VERB=n + fi +fi + +if [ ! -d $QMHOME ]; then + echo "! Couldn't find qmail's home directory, $QMHOME!" +else + if [ "$VERB" = y ]; then + echo "$QMHOME exists" + fi + for i in alias bin boot control queue supervise users; do + if [ ! -d $QMHOME/$i ]; then + echo "! Couldn't find $QMHOME/$i!" + OK=0 + elif [ "$VERB" = y ]; then + echo "$QMHOME/$i exists" + fi + done + + if [ ! -f $QMHOME/rc ]; then + echo "! $QMHOME/rc is missing" + OK=0 + elif [ ! -x $QMHOME/rc ]; then + echo "! $QMHOME/rc is not executable" + echo "...try: chmod 755 $QMHOME/rc" + OK=0 + elif [ `head -1 $QMHOME/rc|cat -vet` != '#!/bin/sh$' ]; then + echo "! $QMHOME/rc has bad magic cookie" + echo "...try: dos2unix $QMHOME/rc" + OK=0 + elif [ "$VERB" = y ]; then + echo "$QMHOME/rc is executable and has a valid magic cookie" + fi +fi + +for i in alias qmaild qmaill qmailp qmailq qmailr qmails; do + grep "^$i:" /etc/passwd >/dev/null + if [ $? -ne 0 ]; then + echo "! Couldn't find $i user in /etc/passwd" + OK=0 + elif [ "$VERB" = y ]; then + echo "$i user exists" + fi +done + +for i in qmail nofiles; do + grep "^$i:" /etc/group >/dev/null + if [ $? -ne 0 ]; then + echo "! Couldn't find $i group in /etc/group" + OK=0 + elif [ "$VERB" = y ]; then + echo "$i group exists" + fi +done + +for i in tcprules tcpserver; do + if [ ! -x $LBIN/$i ]; then + echo "! Couldn't find $LBIN/$i from ucspi-tcp" + OK=0 + elif [ "$VERB" = y ]; then + echo "$i from ucspi-tcp is installed" + fi +done + +for i in multilog softlimit setuidgid supervise svok svscan tai64nlocal; do + if [ ! -x $LBIN/$i ]; then + echo "! Couldn't find $LBIN/$i from daemontools" + OK=0 + elif [ "$VERB" = y ]; then + echo "$i from daemontools is installed" +fi +done + +if [ ! -d /service ]; then + echo "! /service directory is missing" + OK=0 +elif [ "$VERB" = y ]; then + echo "/service directory exists" +fi + +if [ -f /etc/inittab ]; then + grep "^SV" /etc/inittab >/dev/null + if [ $? -ne 0 ]; then + echo "! Couldn't find SV entry in inittab" + OK=0 + elif [ "$VERB" = y ]; then + echo "svscan /service is configured to run via /etc/inittab" + fi + PS="ps -ef" +else + grep "svscanboot" /etc/rc.local >/dev/null + if [ $? -ne 0 ]; then + echo "! Couldn't find 'csh -cf '/command/svscanboot &' in /etc/rc.local" + OK=0 + elif [ "$VERB" = y ]; then + echo "/command/svscanboot is configured to run via /etc/rc.local" + fi + PS="ps -waux" +fi + +SVRUN=`$PS | grep "svscan /service" | grep -v grep` +if [ -z "$SVRUN" ]; then + echo "'! svscan /service' doesn't seem to be running" + OK=0 +elif [ "$VERB" = y ]; then + echo "svscan /service is running" +fi + +if [ ! -f $QMHOME/control/defaultdelivery ]; then + echo "! Couldn't find $QMHOME/control/defaultdelivery" + OK=0 +elif [ ! -s $QMHOME/control/defaultdelivery ]; then + echo "! $QMHOME/control/defaultdelivery is empty" + OK=0 +elif [ "$VERB" = y ]; then + echo "$QMHOME/control/defaultdelivery looks OK" +fi + +if [ ! -f $QMHOME/bin/qmailctl ]; then + echo "! $QMHOME/bin/qmailctl is missing" + OK=0 +elif [ ! -s $QMHOME/bin/qmailctl ]; then + echo "! $QMHOME/bin/qmailctl is empty" + OK=0 +elif [ `head -1 $QMHOME/bin/qmailctl|cat -vet` != '#!/bin/sh$' ]; then + echo "! $QMHOME/bin/qmailctl has bad magic cookie" + echo "...try: dos2unix $QMHOME/bin/qmailctl" + OK=0 +elif [ ! -x $QMHOME/bin/qmailctl ]; then + echo "! $QMHOME/bin/qmailctl is not executable" + echo "...try: chmod 755 $QMHOME/bin/qmailctl" + OK=0 +elif [ "$VERB" = y ]; then + echo "$QMHOME/bin/qmailctl looks OK" +fi +if [ ! -L /usr/bin/qmailctl ]; then + echo "! /usr/bin/qmailctl is missing" + echo "...try: ln -s $QMHOME/bin/qmailctl /usr/bin" + OK=0 +elif [ "$VERB" = y ]; then + echo "/usr/bin/qmailctl exists" +fi + +SVCDIRS="qmail-send qmail-send/log qmail-smtpd qmail-smtpd/log" +if [ "$CHECKPOP" = "y" ]; then + SVCDIRS="$SVCDIRS qmail-pop3d qmail-pop3d/log" +fi +for i in $SVCDIRS; do + if [ ! -f $QMHOME/supervise/$i/run ]; then + echo "! $QMHOME/supervise/$i/run file is missing" + OK=0 + elif [ `head -1 $QMHOME/supervise/$i/run|cat -vet` != '#!/bin/sh$' ]; then + echo "! $QMHOME/supervise/$i/run has bad magic cookie" + echo "...try: dos2unix $QMHOME/supervise/$i/run" + OK=0 + elif [ ! -x $QMHOME/supervise/$i/run ]; then + echo "! $QMHOME/supervise/$i/run file is not executable" + OK=0 + elif [ "$VERB" = y ]; then + echo "$QMHOME/supervise/$i/run looks OK" + fi +done + +if [ ! -f $QMHOME/control/concurrencyincoming ]; then + echo "! $QMHOME/control/concurrencyincoming is missing" + echo "...try: echo 20 >$QMHOME/control/concurrencyincoming" + OK=0 +elif [ "$VERB" = y ]; then + echo "$QMHOME/control/concurrencyincoming looks OK" +fi + +LOGDIRS="/var/log/qmail /var/log/qmail/smtpd" +if [ "$CHECKPOP" = "y" ]; then + LOGDIRS="$LOGDIRS /var/log/qmail/pop3d" +fi +for i in $LOGDIRS; do + if [ ! -d $i ]; then + echo "! $i is missing" + echo "...try: mkdir -p $i" + OK=0 + elif [ "`ls -ld $i|awk '{print $3}'`" != "qmaill" ]; then + echo "! $i has wrong owner, should be qmaill" + echo "...try: chown qmaill $i" + OK=0 + elif [ "`ls -ld $i|awk '{print $1}'`" != "drwxr-xr-x" ]; then + echo "! $i has wrong mode, should be 755" + echo "...try: chmod 755 $i" + OK=0 + elif [ "$VERB" = y ]; then + echo "$i looks OK" + fi +done + +SVCLINKS="/service/qmail-send /service/qmail-smtpd" +if [ "$CHECKPOP" = "y" ]; then + SVCLINKS="$SVCLINKS /service/qmail-pop3d" +fi +for i in $SVCLINKS; do + if [ ! -L $i ]; then + echo "! $i is missing" + echo "...try: ln -s $QMHOME$i $i" + OK=0 + elif [ "$VERB" = y ]; then + echo "$i exists" + fi +done + +if [ ! -f /etc/tcp.smtp ]; then + echo "! /etc/tcp.smtp is missing" + echo "...try: echo '127.:allow,RELAYCLIENT=\"\"' >>/etc/tcp.smtp" + OK=0 +elif [ "$VERB" = y ]; then + echo "/etc/tcp.smtp exists" +fi + +if [ ! -f /etc/tcp.smtp.cdb ]; then + echo "! /etc/tcp.smtp.cdb is missing" + echo "...try: $QMHOME/bin/qmailctl cdb" + OK=0 +elif [ "$VERB" = y ]; then + echo "/etc/tcp.smtp.cdb exists" +fi + +AHOME=`grep "^alias:" /etc/passwd | awk -F: '{print $6}'` +if [ -z "$AHOME" ]; then + echo "! Couldn't find user alias's home directory" + OK=0 +else + for i in root postmaster mailer-daemon; do + if [ ! -f $AHOME/.qmail-$i ]; then + echo "! Alias for $i is missing" + echo "...try: echo me >$AHOME/.qmail-$i" + OK=0 + elif [ "$VERB" = y ]; then + echo "$i alias exists" + fi + done +fi + +if netstat -a | grep smtp | grep -i listen >/dev/null; then + if $PS | grep sendmail | grep -v grep >/dev/null; then + echo "! Sendmail is still running" + echo "...try: $RCDIR/init.d/sendmail stop" + OK=0 + elif $LBIN/svok /service/qmail-smtpd; then + if [ "$VERB" = y ]; then + echo "/service/qmail-smtpd is running" + fi + else + echo "! Something is listening on port 25 (not tcpserver/qmail-smtpd)" + echo "...try: disabling current MTA" + OK=0 + fi +fi + +if [ "$CHECKPOP" = "y" ]; then + if netstat -a | grep pop | grep -i listen >/dev/null; then + if $LBIN/svok /service/qmail-pop3d; then + if [ "$VERB" = y ]; then + echo "/service/qmail-pop3d is running" + fi + else + echo "! Something is listening on port 110 (not tcpserver/qmail-pop3d)" + echo "...try: disabling other POP server" + OK=0 + fi + fi +fi + +for i in /usr/lib/sendmail /usr/sbin/sendmail; do + if [ -f $i -a ! -L $i ]; then + echo "! $i is a file, should be a link" + echo "...try: uninstalling current MTA or: mv $i $i.old; ln -s $QMHOME/bin/sendmail $i" + OK=0 + elif [ ! -f $i ];then + echo "! $i is missing" + echo "...try: ln -s $QMHOME/bin/sendmail $i" + OK=0 + elif [ "$VERB" = y ]; then + echo "$i exists" + fi +done + +if [ $OK -eq 1 ]; then + echo "Congratulations, your LWQ installation looks good!" +elif [ "$VERB" = y ]; then + echo "! Potential problems were found with your LWQ installation" +fi diff --git a/network/netqmail/LWQ_scripts/qmail-send-log-run b/network/netqmail/LWQ_scripts/qmail-send-log-run new file mode 100644 index 0000000000..515baf3836 --- /dev/null +++ b/network/netqmail/LWQ_scripts/qmail-send-log-run @@ -0,0 +1,2 @@ +#!/bin/sh +exec /usr/bin/setuidgid qmaill /usr/bin/multilog t /var/log/qmail diff --git a/network/netqmail/LWQ_scripts/qmail-send-run b/network/netqmail/LWQ_scripts/qmail-send-run new file mode 100644 index 0000000000..8dbd3adf52 --- /dev/null +++ b/network/netqmail/LWQ_scripts/qmail-send-run @@ -0,0 +1,2 @@ +#!/bin/sh +exec /var/qmail/rc diff --git a/network/netqmail/LWQ_scripts/qmail-smtpd-log-run b/network/netqmail/LWQ_scripts/qmail-smtpd-log-run new file mode 100644 index 0000000000..a7a7d4fd37 --- /dev/null +++ b/network/netqmail/LWQ_scripts/qmail-smtpd-log-run @@ -0,0 +1,2 @@ +#!/bin/sh +exec /usr/bin/setuidgid qmaill /usr/bin/multilog t /var/log/qmail/smtpd diff --git a/network/netqmail/LWQ_scripts/qmail-smtpd-run b/network/netqmail/LWQ_scripts/qmail-smtpd-run new file mode 100644 index 0000000000..b72b52f98b --- /dev/null +++ b/network/netqmail/LWQ_scripts/qmail-smtpd-run @@ -0,0 +1,22 @@ +#!/bin/sh + +QMAILDUID=`id -u qmaild` +NOFILESGID=`id -g qmaild` +MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` +LOCAL=`head -1 /var/qmail/control/me` + +if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" -o -z "$LOCAL" ]; then + echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in + echo /var/qmail/supervise/qmail-smtpd/run + exit 1 +fi + +if [ ! -f /var/qmail/control/rcpthosts ]; then + echo "No /var/qmail/control/rcpthosts!" + echo "Refusing to start SMTP listener because it'll create an open relay" + exit 1 +fi + +exec /usr/bin/softlimit -m 20000000 \ + /usr/bin/tcpserver -v -R -l "$LOCAL" -x /etc/tcp.smtp.cdb -c "$MAXSMTPD" \ + -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp /var/qmail/bin/qmail-smtpd 2>&1 diff --git a/network/netqmail/LWQ_scripts/qmailctl-script-dt70 b/network/netqmail/LWQ_scripts/qmailctl-script-dt70 new file mode 100644 index 0000000000..6fd795ca24 --- /dev/null +++ b/network/netqmail/LWQ_scripts/qmailctl-script-dt70 @@ -0,0 +1,109 @@ +#!/bin/sh + +# For Red Hat chkconfig +# chkconfig: - 80 30 +# description: the qmail MTA + +PATH=/var/qmail/bin:/bin:/usr/bin:/usr/local/bin:/usr/local/sbin +export PATH + +QMAILDUID=`id -u qmaild` +NOFILESGID=`id -g qmaild` + +case "$1" in + start) + echo "Starting qmail" + if svok /service/qmail-send ; then + svc -u /service/qmail-send /service/qmail-send/log + else + echo "qmail-send supervise not running" + fi + if svok /service/qmail-smtpd ; then + svc -u /service/qmail-smtpd /service/qmail-smtpd/log + else + echo "qmail-smtpd supervise not running" + fi + if [ -d /var/lock/subsys ]; then + touch /var/lock/subsys/qmail + fi + ;; + stop) + echo "Stopping qmail..." + echo " qmail-smtpd" + svc -d /service/qmail-smtpd /service/qmail-smtpd/log + echo " qmail-send" + svc -d /service/qmail-send /service/qmail-send/log + if [ -f /var/lock/subsys/qmail ]; then + rm /var/lock/subsys/qmail + fi + ;; + stat) + svstat /service/qmail-send + svstat /service/qmail-send/log + svstat /service/qmail-smtpd + svstat /service/qmail-smtpd/log + qmail-qstat + ;; + doqueue|alrm|flush) + echo "Flushing timeout table and sending ALRM signal to qmail-send." + /var/qmail/bin/qmail-tcpok + svc -a /service/qmail-send + ;; + queue) + qmail-qstat + qmail-qread + ;; + reload|hup) + echo "Sending HUP signal to qmail-send." + svc -h /service/qmail-send + ;; + pause) + echo "Pausing qmail-send" + svc -p /service/qmail-send + echo "Pausing qmail-smtpd" + svc -p /service/qmail-smtpd + ;; + cont) + echo "Continuing qmail-send" + svc -c /service/qmail-send + echo "Continuing qmail-smtpd" + svc -c /service/qmail-smtpd + ;; + restart) + echo "Restarting qmail:" + echo "* Stopping qmail-smtpd." + svc -d /service/qmail-smtpd /service/qmail-smtpd/log + echo "* Sending qmail-send SIGTERM and restarting." + svc -t /service/qmail-send /service/qmail-send/log + echo "* Restarting qmail-smtpd." + svc -u /service/qmail-smtpd /service/qmail-smtpd/log + ;; + cdb) + tcprules /etc/tcp.smtp.cdb /etc/tcp.smtp.tmp < /etc/tcp.smtp + chmod 644 /etc/tcp.smtp.cdb + echo "Reloaded /etc/tcp.smtp." + ;; + help) + cat <<HELP + stop -- stops mail service (smtp connections refused, nothing goes out) + start -- starts mail service (smtp connection accepted, mail can go out) + pause -- temporarily stops mail service (connections accepted, nothing leaves) + cont -- continues paused mail service + stat -- displays status of mail service + cdb -- rebuild the tcpserver cdb file for smtp +restart -- stops and restarts smtp, sends qmail-send a TERM & restarts it +doqueue -- schedules queued messages for immediate delivery + reload -- sends qmail-send HUP, rereading locals and virtualdomains + queue -- shows status of queue + alrm -- same as doqueue + flush -- same as doqueue + hup -- same as reload +HELP + ;; + *) + echo "Usage: $0 {start|stop|restart|doqueue|flush|reload|stat|pause|cont|cdb|queue|help}" + exit 1 + ;; +esac + +exit 0 diff --git a/network/netqmail/LWQ_scripts/rc b/network/netqmail/LWQ_scripts/rc new file mode 100644 index 0000000000..5af8ced80b --- /dev/null +++ b/network/netqmail/LWQ_scripts/rc @@ -0,0 +1,7 @@ +#!/bin/sh + +# Using stdout for logging +# Using control/defaultdelivery from qmail-local to deliver messages by default + +exec env - PATH="/var/qmail/bin:$PATH" \ +qmail-start "`cat /var/qmail/control/defaultdelivery`" diff --git a/network/netqmail/README b/network/netqmail/README new file mode 100644 index 0000000000..bc385cb16b --- /dev/null +++ b/network/netqmail/README @@ -0,0 +1,17 @@ +netqmail - djb's qmail mta. + +This package is intended for folk who are using qmail now and might +like a clean way to install and remove the latest version there is. + +daemontools is an optional dependency, highly recommended. + +The following 2 changes are made to the installed layout: + +1. man pages formerly under /var/qmail/man are moved to /usr/man, and +2. documentation formerly under /var/qmail/doc is moved to the usual + Slackware documentation location. + +Please see README.SBo for important information on how to build and +install this package. + +You can perform test installs to a chroot environment - see tests/README. diff --git a/network/netqmail/README.SBo b/network/netqmail/README.SBo new file mode 100644 index 0000000000..95ae23c2ca --- /dev/null +++ b/network/netqmail/README.SBo @@ -0,0 +1,88 @@ +You must stop your running MTA before installing or upgrading netqmail, +unless you built with DO_CONFIG=no (see below) +If your running MTA is qmail, you can stop it by entering "qmailctl stop". + +The principal reference for how to install and configure qmail is "Life +with qmail" herinafter referred to as LWQ. URL is +http://www.lifewithqmail.org/lwq.html. + +This SlackBuild can be configured to perform all the steps in LWQ +section 2 (Installation) except 2.9 (Test the Installation). + +SETTING TMP + +This SlackBuild uses mkchroot, which runs best if the TMP directory is on the +same file system as /usr. If you normally mount /tmp, you may want to use + + TMP=/usr/localtmp ./netqmail.SlackBuild + +otherwise if you are going to build using a mounted /tmp then put + + MKCHROOT_IGNORE_LN_ERRORS=yes ./netqmail.SlackBuild + +to prevent copious error messages. The build will use >200M of file space. +(when mkchroot fails to make a hard link, it does a "cp -a" instead. The errors +are not suppressed so the user can ^C out and make the target somewhere else). + +QMAIL USERS AND GROUPS + +Qmail needs 7 users and 2 groups. By default, installing netqmail will create +them if they do not already exist on the target system. To prevent this: + + INSTALL_USERS=no ./netqmail.SlackBuild + +User and group ids have been assigned by SBo. However if usrs or groups already +exist on the build system then their ids are used instead. If they don't exist +on the build system, you can force them to be other than the default bu e.g.: + + NOFILES_GROUP=1001 ALIAS_USER=1001 ./netqmail.SlackBuild + +At least some of the qmail users and groups are compiled into the C code. The +compile is done in a chroot environment so the build system's /etc/passwd can +be left untouched. uids & gids defined, discovered or defaulted as above are +used in the chroot build. + +QMAIL CONFIGURATION + +By default, the SlackBuild implements a number of other steps from LWQ section 2 +(in addition to creating users, above). To completely disable this: + + DO_CONFIG=no ./netqmail.SlackBuild + +If uou specified the above, the rest of this README does not apply: stop +reading now. + +MAIL ADMININISTRATOR + +RFC 2821 requires that "postmaster" be a real user who can receive mail. +qmail implements this requirement via its aliasing system. LWQ uses the example +user "dave": + + ADMIN_USER=dave ./netqmail.SlackBuild + +mail to postmaster will now be sent to dave. Mail to root is also sent to dave, +via a separate entry in /var/wmail/alias. To see these, use "ls -A" since all +files in /var/wmail/alias are hidden. +User "mailer-daemon" is a de-facto standard recipient for some bounces. User +"abuse" is a de facto standard recipient for abuse complaints. These 2 names are +symlinked to the postmaster entry in /var/wmail/alias. + +AUTOMATIC START UP + +qmail was written to be controllable by daemontools. To configure that +daemontools will start qmail, put: + + ADMIN_USER=dave SYMLINK_SERVICE=yes ./netqmail.SlackBuild + +Note that it is an error to request automatic start up without specifying a +mail admininistrator. +With this option enabled, qmail should start by itself soon after installation. + +DEFAULT MAIL DELIVERY METHOD + +qmail supports delivery to the traditional mbox format (1 file per user) or the +newer Maildir format (1 file per email). Users can set their preference in +~/.qmail; otherwise they get the system default. The default built default +method is mbox. To change this to Maildir, put: + + MAILDIR=yes ./netqmail.SlackBuild diff --git a/network/netqmail/doinst.sh b/network/netqmail/doinst.sh new file mode 100644 index 0000000000..729611d432 --- /dev/null +++ b/network/netqmail/doinst.sh @@ -0,0 +1 @@ +chroot . /bin/sh /usr/doc/netqmail-1.06/install_scripts/doinst_sh diff --git a/network/netqmail/doinst_config b/network/netqmail/doinst_config new file mode 100644 index 0000000000..d19f9a636a --- /dev/null +++ b/network/netqmail/doinst_config @@ -0,0 +1,30 @@ +# LWQ 2.5.5 +cd /usr/doc/netqmail-1.06/install_scripts +./config +cd /var/qmail/control +for i in me defaultdomain plusdomain locals rcpthosts +do + config $i.new +done + +#LWQ 2.8.2.3 +grep -q '127.:allow,RELAYCLIENT=""' /etc/tcp.smtp 2>/dev/null || + echo '127.:allow,RELAYCLIENT=""' >>/etc/tcp.smtp +qmailctl cdb + +# LWQ 2.8.3 +for i in /usr/lib /usr/sbin +do + if [ -e $i/sendmail ] + then + if [ $(readlink -f $i/sendmail) != /var/qmail/bin/sendmail ] + then + mv $i/sendmail $i/sendmail.old + chmod 0 $i/sendmail.old + ln -s /var/qmail/bin/sendmail $i + fi + else + rm -f $i/sendmail # Could be a dangling symlink + ln -s /var/qmail/bin/sendmail $i + fi +done diff --git a/network/netqmail/doinst_new b/network/netqmail/doinst_new new file mode 100644 index 0000000000..d99dba1aac --- /dev/null +++ b/network/netqmail/doinst_new @@ -0,0 +1,9 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + rm $NEW + fi +} diff --git a/network/netqmail/doinst_service b/network/netqmail/doinst_service new file mode 100644 index 0000000000..d08423b01b --- /dev/null +++ b/network/netqmail/doinst_service @@ -0,0 +1,12 @@ +# LWQ 2.8.2.2 +if [ -d /service ] +then + for i in qmail-send qmail-smtpd + do + [ -L /service/$i -o -e /service/$i ] || + ln -s /var/qmail/supervise/$i /service + done +else + echo "There is no /service directory" >&2 + echo "Did you install daemontools?" >&2 +fi diff --git a/network/netqmail/doinst_users b/network/netqmail/doinst_users new file mode 100644 index 0000000000..f8e4c0b82f --- /dev/null +++ b/network/netqmail/doinst_users @@ -0,0 +1,18 @@ +grep -q ^nofiles: /etc/group || + groupadd -g 340 nofiles +grep -q ^alias: /etc/passwd || + useradd -r -g nofiles -d /var/qmail/alias -u 339 -s "" alias +grep -q ^qmaild: /etc/passwd || + useradd -r -g nofiles -d /var/qmail -u 340 -s "" qmaild +grep -q ^qmaill: /etc/passwd || + useradd -r -g nofiles -d /var/qmail -u 341 -s "" qmaill +grep -q ^qmailp: /etc/passwd || + useradd -r -g nofiles -d /var/qmail -u 342 -s "" qmailp +grep -q ^qmail: /etc/group || + groupadd -g 339 qmail +grep -q ^qmailq: /etc/passwd || + useradd -r -g qmail -d /var/qmail -u 343 -s "" qmailq +grep -q ^qmailr: /etc/passwd || + useradd -r -g qmail -d /var/qmail -u 344 -s "" qmailr +grep -q ^qmails: /etc/passwd || + useradd -r -g qmail -d /var/qmail -u 345 -s "" qmails diff --git a/network/netqmail/dot_new.patch b/network/netqmail/dot_new.patch new file mode 100644 index 0000000000..f5f4485067 --- /dev/null +++ b/network/netqmail/dot_new.patch @@ -0,0 +1,97 @@ +--- config-fast.sh 1998/06/15 10:53:16 1.1 ++++ config-fast.sh 2017/02/07 01:58:27 +@@ -2,29 +2,29 @@ + echo Your fully qualified host name is "$fqdn". + + echo Putting "$fqdn" into control/me... +-echo "$fqdn" > QMAIL/control/me +-chmod 644 QMAIL/control/me ++echo "$fqdn" > QMAIL/control/me.new ++chmod 644 QMAIL/control/me.new + + ( echo "$fqdn" | sed 's/^\([^\.]*\)\.\([^\.]*\)\./\2\./' | ( + read ddom + echo Putting "$ddom" into control/defaultdomain... +- echo "$ddom" > QMAIL/control/defaultdomain +- chmod 644 QMAIL/control/defaultdomain ++ echo "$ddom" > QMAIL/control/defaultdomain.new ++ chmod 644 QMAIL/control/defaultdomain.new + ) ) + + ( echo "$fqdn" | sed 's/^.*\.\([^\.]*\)\.\([^\.]*\)$/\1.\2/' | ( + read pdom + echo Putting "$pdom" into control/plusdomain... +- echo "$pdom" > QMAIL/control/plusdomain +- chmod 644 QMAIL/control/plusdomain ++ echo "$pdom" > QMAIL/control/plusdomain.new ++ chmod 644 QMAIL/control/plusdomain.new + ) ) + + echo Putting "$fqdn" into control/locals... +-echo "$fqdn" >> QMAIL/control/locals +-chmod 644 QMAIL/control/locals ++echo "$fqdn" >> QMAIL/control/locals.new ++chmod 644 QMAIL/control/locals.new + + echo Putting "$fqdn" into control/rcpthosts... +-echo "$fqdn" >> QMAIL/control/rcpthosts +-chmod 644 QMAIL/control/rcpthosts ++echo "$fqdn" >> QMAIL/control/rcpthosts.new ++chmod 644 QMAIL/control/rcpthosts.new + echo "Now qmail will refuse to accept SMTP messages except to $fqdn." + echo 'Make sure to change rcpthosts if you add hosts to locals or virtualdomains!' +--- config.sh 1998/06/15 10:53:16 1.1 ++++ config.sh 2017/02/07 01:51:04 +@@ -7,24 +7,24 @@ + then + echo Your host\'s fully qualified name in DNS is "$fqdn". + echo Putting "$fqdn" into control/me... +- echo "$fqdn" > QMAIL/control/me +- chmod 644 QMAIL/control/me ++ echo "$fqdn" > QMAIL/control/me.new ++ chmod 644 QMAIL/control/me.new + ( echo "$fqdn" | sed 's/^\([^\.]*\)\.\([^\.]*\)\./\2\./' | ( + read ddom + echo Putting "$ddom" into control/defaultdomain... +- echo "$ddom" > QMAIL/control/defaultdomain +- chmod 644 QMAIL/control/defaultdomain ++ echo "$ddom" > QMAIL/control/defaultdomain.new ++ chmod 644 QMAIL/control/defaultdomain.new + ) ) + ( echo "$fqdn" | sed 's/^.*\.\([^\.]*\)\.\([^\.]*\)$/\1.\2/' | ( + read pdom + echo Putting "$pdom" into control/plusdomain... +- echo "$pdom" > QMAIL/control/plusdomain +- chmod 644 QMAIL/control/plusdomain ++ echo "$pdom" > QMAIL/control/plusdomain.new ++ chmod 644 QMAIL/control/plusdomain.new + ) ) + echo ' ' + echo Checking local IP addresses: +- : > QMAIL/control/locals +- chmod 644 QMAIL/control/locals ++ : > QMAIL/control/locals.new ++ chmod 644 QMAIL/control/locals.new + ( ./dnsip "$fqdn" + ./ipmeprint ) | sort -u | \ + ( +@@ -35,7 +35,7 @@ + if read local + then + echo Adding "$local" to control/locals... +- echo "$local" >> QMAIL/control/locals ++ echo "$local" >> QMAIL/control/locals.new + else + echo PTR lookup failed. I assume this address has no DNS name. + fi +@@ -48,8 +48,8 @@ + echo You don\'t have to worry about aliases, i.e., domains with CNAME records. + echo ' ' + echo Copying QMAIL/control/locals to QMAIL/control/rcpthosts... +- cp QMAIL/control/locals QMAIL/control/rcpthosts +- chmod 644 QMAIL/control/rcpthosts ++ cp QMAIL/control/locals.new QMAIL/control/rcpthosts.new ++ chmod 644 QMAIL/control/rcpthosts.new + echo 'Now qmail will refuse to accept SMTP messages except to those hosts.' + echo 'Make sure to change rcpthosts if you add hosts to locals or virtualdomains!' + else diff --git a/network/netqmail/fix_paths.patch b/network/netqmail/fix_paths.patch new file mode 100644 index 0000000000..c1ca92e790 --- /dev/null +++ b/network/netqmail/fix_paths.patch @@ -0,0 +1,55 @@ +--- INSTALL.vsm 1998/06/15 10:53:16 1.1 ++++ INSTALL.vsm 2017/02/20 08:47:19 +@@ -43,7 +43,7 @@ + 3. Using sendmail's delivery agent + + sendmail uses binmail to deliver to /var/spool/mail. binmail is shipped +-with the operating system as /bin/mail or /usr/libexec/mail.local. ++with the operating system as /bin/mail or /usr/sbin/mail.local. + + There is some variation in binmail syntax among systems. The most common + interfaces are shown in /var/qmail/boot/binm1, /var/qmail/boot/binm2, +--- REMOVE.binmail 1998/06/15 10:53:16 1.1 ++++ REMOVE.binmail 2017/02/20 08:47:19 +@@ -2,11 +2,11 @@ + configured qmail to use binmail for local delivery. + + +-1. Find the binmail binary on your system: /usr/libexec/mail.local if ++1. Find the binmail binary on your system: /usr/sbin/mail.local if + that exists, otherwise /bin/mail. + + 2. Remove permissions from the binmail binary: +- # chmod 0 /usr/libexec/mail.local ++ # chmod 0 /usr/sbin/mail.local + + 3. If the binmail binary was /bin/mail, make sure that ``mail'' still + invokes a usable mailer. Under SVR4 you may want to link mail to +--- binm1+df.sh 1998/06/15 10:53:16 1.1 ++++ binm1+df.sh 2017/02/20 08:47:19 +@@ -3,9 +3,9 @@ + # Using splogger to send the log through syslog. + # Using dot-forward to support sendmail-style ~/.forward files. + # Using binmail to deliver messages to /var/spool/mail/$USER by default. +-# Using BSD 4.4 binmail interface: /usr/libexec/mail.local -r ++# Using BSD 4.4 binmail interface: /usr/sbin/mail.local -r + + exec env - PATH="QMAIL/bin:$PATH" \ + qmail-start '|dot-forward .forward +-|preline -f /usr/libexec/mail.local -r "${SENDER:-MAILER-DAEMON}" -d "$USER"' \ ++|preline -f /usr/sbin/mail.local -r "${SENDER:-MAILER-DAEMON}" -d "$USER"' \ + splogger qmail +--- binm1.sh 1998/06/15 10:53:16 1.1 ++++ binm1.sh 2017/02/20 08:47:19 +@@ -2,9 +2,9 @@ + + # Using splogger to send the log through syslog. + # Using binmail to deliver messages to /var/spool/mail/$USER by default. +-# Using BSD 4.4 binmail interface: /usr/libexec/mail.local -r ++# Using BSD 4.4 binmail interface: /usr/sbin/mail.local -r + + exec env - PATH="QMAIL/bin:$PATH" \ + qmail-start \ +-'|preline -f /usr/libexec/mail.local -r "${SENDER:-MAILER-DAEMON}" -d "$USER"' \ ++'|preline -f /usr/sbin/mail.local -r "${SENDER:-MAILER-DAEMON}" -d "$USER"' \ + splogger qmail diff --git a/network/netqmail/netqmail.SlackBuild b/network/netqmail/netqmail.SlackBuild new file mode 100644 index 0000000000..fb16eef4a2 --- /dev/null +++ b/network/netqmail/netqmail.SlackBuild @@ -0,0 +1,271 @@ +#!/bin/sh + +# Slackware build script for netqmail + +# Copyright 2017 Duncan Roe, Melbourne, Australia +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=netqmail +VERSION=${VERSION:-1.06} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i586 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} +DOCDIR=$PKG/usr/doc/$PRGNAM-$VERSION +CHROOT=$TMP/$PRGNAM +DO_CONFIG=${DO_CONFIG:-yes} +MAILDIR=${MAILDIR:-no} +SYMLINK_SERVICE=${SYMLINK_SERVICE:-no} +ADMIN_USER=${ADMIN_USER:-nobody} +INSTALL_USERS=${INSTALL_USERS:-yes} +VERBOSE_ADDCHROOT=${VERBOSE_ADDCHROOT:-yes} +export VERBOSE_ADDCHROOT + +# Put here rather than /var/log/setup to keep different build variants +INSTDIR=$DOCDIR/install_scripts + +[ "$ARCH" = "x86_64" ] && LIBDIRSUFFIX="64" || LIBDIRSUFFIX="" + +# These are the user and group ids allocated by SBo +NOFILES_GROUP=${NOFILES_GROUP:-340} +QMAIL_GROUP=${QMAIL_GROUP:-339} +ALIAS_USER=${ALIAS_USER:-339} +QMAILD_USER=${QMAILD_USER:-340} +QMAILL_USER=${QMAILL_USER:-341} +QMAILP_USER=${QMAILP_USER:-342} +QMAILQ_USER=${QMAILQ_USER:-343} +QMAILR_USER=${QMAILR_USER:-344} +QMAILS_USER=${QMAILS_USER:-345} + +# It's an error to request to start qmail w/out specifying an admin user +[ $SYMLINK_SERVICE = no -o $ADMIN_USER != nobody ] || + { echo "You must provide an admin user to start qmail"; exit 1; } + +# If any users or groups are already configured, use their id instead +for i in nofiles qmail +do + grep -q ^$i: /etc/group && + eval $(echo $i|tr a-z A-Z)_GROUP=$(grep ^$i: /etc/group|cut -f3 -d:) +done +for i in alias qmail{d,l,p,q,r,s} +do + grep -q ^$i: /etc/passwd && + eval $(echo $i|tr a-z A-Z)_USER=$(grep ^$i: /etc/passwd|cut -f3 -d:) +done + +set -e + +rm -rf $PKG $CHROOT +mkdir -p $INSTDIR $OUTPUT $CHROOT + +# Create doinst.sh fragment to add users & groups +# (-r option stops creation of mailboxes) +if [ "$INSTALL_USERS" = yes ]; then + cat >$INSTDIR/doinst_users <<//// +grep -q ^nofiles: /etc/group || + groupadd -g $NOFILES_GROUP nofiles +grep -q ^alias: /etc/passwd || + useradd -r -g nofiles -d /var/qmail/alias -u $ALIAS_USER -s "" alias +grep -q ^qmaild: /etc/passwd || + useradd -r -g nofiles -d /var/qmail -u $QMAILD_USER -s "" qmaild +grep -q ^qmaill: /etc/passwd || + useradd -r -g nofiles -d /var/qmail -u $QMAILL_USER -s "" qmaill +grep -q ^qmailp: /etc/passwd || + useradd -r -g nofiles -d /var/qmail -u $QMAILP_USER -s "" qmailp +grep -q ^qmail: /etc/group || + groupadd -g $QMAIL_GROUP qmail +grep -q ^qmailq: /etc/passwd || + useradd -r -g qmail -d /var/qmail -u $QMAILQ_USER -s "" qmailq +grep -q ^qmailr: /etc/passwd || + useradd -r -g qmail -d /var/qmail -u $QMAILR_USER -s "" qmailr +grep -q ^qmails: /etc/passwd || + useradd -r -g qmail -d /var/qmail -u $QMAILS_USER -s "" qmails +//// +else + cat /dev/null >$INSTDIR/doinst_users +fi + +cd $CHROOT +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +cd $PRGNAM-$VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +for i in $CWD/*.patch +do + cat $i|patch -p0 +done + +############################################################################ +# The build process requires all the qmail users to be registered, # +# so do it in a chroot to avoid messing with the build system's etc/passwd # +############################################################################ + +cd $CHROOT +export MKCHROOT_FOR_GCC=yes +mkchroot . + +# need make + groff + sed +addchroot . make guile gc libffi libunistring groff sed + +# need gcc, kernel headers, flex +addchroot . binutils gcc libmpc kernel-headers flex + +mkdir -p var/qmail + +# install the qmail users and groups for chroot +cat >>etc/group <<//// +nofiles:x:$NOFILES_GROUP: +qmail:x:$QMAIL_GROUP: +//// +cat >>etc/passwd <<//// +root:x:0:0::/root:/bin/bash +alias:x:$ALIAS_USER:$NOFILES_GROUP::/var/qmail/alias:/bin/true +qmaild:x:$QMAILD_USER:$NOFILES_GROUP::/var/qmail:/bin/true +qmaill:x:$QMAILL_USER:$NOFILES_GROUP::/var/qmail:/bin/true +qmailp:x:$QMAILP_USER:$NOFILES_GROUP::/var/qmail:/bin/true +qmailq:x:$QMAILQ_USER:$QMAIL_GROUP::/var/qmail:/bin/true +qmailr:x:$QMAILR_USER:$QMAIL_GROUP::/var/qmail:/bin/true +qmails:x:$QMAILS_USER:$QMAIL_GROUP::/var/qmail:/bin/true +//// + +# Set up the commands to run in the chroot jail +cat >commands <<//// +cd /$PRGNAM-$VERSION +make +make setup check +//// + +# Run the chroot commands +chroot . /bin/sh /commands + +rm -r var/qmail/man/cat* +mv var/qmail/doc/* $DOCDIR +rmdir var/qmail/doc +mv var/qmail/man $PKG/usr +mv var $PKG + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +find $PKG/usr/man -type f -exec gzip -9 {} \; +for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done + +cat $CWD/$PRGNAM.SlackBuild > $DOCDIR/$PRGNAM.SlackBuild +cp -a $CHROOT/$PRGNAM-$VERSION/{BLURB*,CHANGES,COPYRIGHT,INTERNALS,README} $DOCDIR + +chown -R root: $PKG/usr + +mkdir -p $PKG/install +cat $INSTDIR/doinst_users $CWD/doinst_new > $INSTDIR/doinst_sh + +########################################################################### +# doinst.sh implements the configure advice in "Life with qmail" (LWQ). # +# You can skip this step by secifying DO_CONFIG=no on the SlackBuild line # +########################################################################### + +if [ $DO_CONFIG = yes ] +then + # LWQ 2.5.5 + cd $CHROOT/$PRGNAM-$VERSION + cp config hostname dnsfq dnsip ipmeprint dnsptr $INSTDIR + cat $CWD/doinst_config >> $INSTDIR/doinst_sh + + # LWQ 2.8.1 + cd $PKG + cat $CWD/LWQ_scripts/rc > var/qmail/rc + chmod 755 var/qmail/rc + mkdir -p var/log/qmail + [ "$MAILDIR" = no ] && i=./Mailbox || i=./Maildir/ + echo $i > var/qmail/control/defaultdelivery + + # LWQ 2.8.2.1 + cat $CWD/LWQ_scripts/qmailctl-script-dt70 > var/qmail/bin/qmailctl + chmod 755 var/qmail/bin/qmailctl + cat $CWD/LWQ_scripts/inst_check > var/qmail/bin/inst_check + chmod 755 var/qmail/bin/inst_check # LWQ 2.9 + mkdir usr/bin + ln -s ../../var/qmail/bin/{qmailctl,inst_check} usr/bin + + # LWQ 2.8.2.2 + mkdir -p var/qmail/supervise/qmail-send/log + mkdir -p var/qmail/supervise/qmail-smtpd/log + cat $CWD/LWQ_scripts/qmail-send-run > var/qmail/supervise/qmail-send/run + cat $CWD/LWQ_scripts/qmail-send-log-run \ + > var/qmail/supervise/qmail-send/log/run + cat $CWD/LWQ_scripts/qmail-smtpd-run > var/qmail/supervise/qmail-smtpd/run + echo 20 > var/qmail/control/concurrencyincoming + chmod 644 var/qmail/control/concurrencyincoming + cat $CWD/LWQ_scripts/qmail-smtpd-log-run \ + > var/qmail/supervise/qmail-smtpd/log/run + chmod 755 var/qmail/supervise/qmail-send/run + chmod 755 var/qmail/supervise/qmail-send/log/run + chmod 755 var/qmail/supervise/qmail-smtpd/run + chmod 755 var/qmail/supervise/qmail-smtpd/log/run + mkdir -p var/log/qmail/smtpd + chown $QMAILL_USER:$NOFILES_GROUP var/log/qmail var/log/qmail/smtpd + [ $SYMLINK_SERVICE = no ] || cat $CWD/doinst_service >> $INSTDIR/doinst_sh + + # 2.8.3 is done in doinst_config + + # LWQ 2.8.4 + if [ $ADMIN_USER != nobody ] + then + echo $ADMIN_USER > var/qmail/alias/.qmail-root + echo $ADMIN_USER > var/qmail/alias/.qmail-postmaster + ln -s .qmail-postmaster var/qmail/alias/.qmail-mailer-daemon + ln -s .qmail-postmaster var/qmail/alias/.qmail-abuse + chmod 644 var/qmail/alias/.qmail-root var/qmail/alias/.qmail-postmaster + fi +fi + +# qmail installer likes to put a sendmail symlink in /usr/lib +mkdir -p $PKG/usr/lib + +# symlink useful programs to usr/bin +mkdir -p $PKG/usr/bin +ln -s ../../var/qmail/bin/maildirmake $PKG/usr/bin + +# Distribute the installer test suite +mkdir $INSTDIR/tests +cp -a $CWD/tests/{README,makechroot} $INSTDIR/tests/ +chown -R root: $INSTDIR/tests + +cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l n -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/network/netqmail/netqmail.info b/network/netqmail/netqmail.info new file mode 100644 index 0000000000..7dd37b7c4f --- /dev/null +++ b/network/netqmail/netqmail.info @@ -0,0 +1,10 @@ +PRGNAM="netqmail" +VERSION="1.06" +HOMEPAGE="http://qmail.ii.net/netqmail/" +DOWNLOAD="http://qmail.ii.net/netqmail-1.06.tar.gz" +MD5SUM="c922f776140b2c83043a6195901c67d3" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="ucspi-tcp mkchroot" +MAINTAINER="Duncan Roe" +EMAIL="duncan_roe@optusnet.com.au" diff --git a/network/netqmail/slack-desc b/network/netqmail/slack-desc new file mode 100644 index 0000000000..3cb9a631bd --- /dev/null +++ b/network/netqmail/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +netqmail: netqmail (the qmail MTA) +netqmail: +netqmail: netqmail is a source distribution of qmail 1.0.3. qmail is a secure, +netqmail: reliable, efficient, simple message transfer agent. It is designed +netqmail: for typical Internet-connected UNIX hosts. As of October 2001, qmail +netqmail: was the second most common SMTP server on the Internet, and had by +netqmail: far the fastest growth of any SMTP server. Nowadays its Internet +netqmail: usage is about 10%. +netqmail: qmail home page: http://qmail.ii.net/top.html +netqmail: a gentler introduction: http://www.lifewithqmail.org/lwq.html +netqmail: diff --git a/network/netqmail/tests/README b/network/netqmail/tests/README new file mode 100644 index 0000000000..02b5e5286f --- /dev/null +++ b/network/netqmail/tests/README @@ -0,0 +1,31 @@ +makechroot + +Make a chroot-able tree in which to run installpkg or explodepkg netqmail (i.e. +from an interactive instance of chroot). +Can also test installpkg --root to this tree. + +Whatever you do, you can step through the script commands in a root window. +After explodepkg, you can step through the install scripts. + +See ../README.SBo for mkchroot caveats. Approximate disk usage: 1.5MB local +$CHROOT, 131MB mounted $CHROOT. + +Set CHROOT to dir to buid (will be removed & re-created) (default is /tmp/t5). +Set PKGDIR to directory containing SBo packages (default is /usr/packages). +Set STRIP_INITTAB_SV=no to leave the SV line added by daemontools (dflt yes). +Set INSTALL_DAEMONTOOLS=yes to install daemontools (default is no). +Set STRIP_QMAIL_USERS_GROUPS=no to retain qmail users and groups (dflt yes). +Set VERBOSE_ADDCHROOT=false to suppress install progress reporting (dflt true). +Set MKCHROOT_IGNORE_LN_ERRORS=yes to suppress error messages from mounted chroot + +If you specified INSTALL_DAEMONTOOLS=yes, you can try running inst_check from an +interactive chroot instance (qmail installation checker). +inst_check will tell you to mount /proc - be sure to umount it afterwards. +*if* the main system is running svscanboot, *and* the main system is not running +an MTA, on re-running inst_check you should see + + Congratulations, your LWQ installation looks good! + +Otherwise you should see a self-explanatory error message. If the main system is +not runninmg svscanboot, you can start it in the chroot environment. +Remember to umount /proc before exitting chroot. diff --git a/network/netqmail/tests/makechroot b/network/netqmail/tests/makechroot new file mode 100644 index 0000000000..06435ef2d3 --- /dev/null +++ b/network/netqmail/tests/makechroot @@ -0,0 +1,74 @@ +#!/bin/sh +#set -x + +# A function to make a file local (not hard-linked to the real file) +# One should run this on any file that the test might modify +make_local() +{ + while [ $# -gt 0 ] + do + cp -a $CHROOT/$1 $CHROOT/$1.new + mv $CHROOT/$1.new $CHROOT/$1 + shift + done +} + +CHROOT=${CHROOT:-/tmp/t5} +VERBOSE_ADDCHROOT=${VERBOSE_ADDCHROOT:-true} +export VERBOSE_ADDCHROOT +PKGDIR=${PKGDIR:-/usr/packages} +[ -n "$MKCHROOT_IGNORE_LN_ERRORS" ] && LNE='2>/dev/null' || LNE= + +# These are options +INSTALL_DAEMONTOOLS=${INSTALL_DAEMONTOOLS:-no} +STRIP_INITTAB_SV=${STRIP_INITTAB_SV:-yes} +STRIP_QMAIL_USERS_GROUPS=${STRIP_QMAIL_USERS_GROUPS:-yes} + +[ ! -d $CHROOT/proc/1 ] || umount $CHROOT/proc +rm -rf $CHROOT +mkchroot $CHROOT +addchroot $CHROOT tar pkgtools +mkdir -p $CHROOT$PKGDIR +eval ln $PKGDIR/netqmail* $PKGDIR/daemontools* $CHROOT$PKGDIR $LNE \|\| \ + cp -a $PKGDIR/netqmail* $PKGDIR/daemontools* $CHROOT$PKGDIR +addchroot $CHROOT ucspi-tcp mkchroot + +# Set up Slackware install DB for mkchroot +for i in packages scripts +do + mkdir $CHROOT/var/log/$i + (cd /var/log/$i; ls -1 | while read j; do [ -d $j ] || + eval ln $j $CHROOT/var/log/$i $LNE \|\| cp -a $j $CHROOT/var/log/$i; done) +done + +addchroot $CHROOT etc +make_local etc/{group,gshadow,passwd,shadow} +addchroot $CHROOT sysvinit +addchroot $CHROOT sysvinit-scripts +make_local etc/inittab +[ $STRIP_INITTAB_SV != yes ] || +{ + cat $CHROOT/etc/inittab | grep -E -v '^SV:' >$CHROOT/etc/inittab.new + mv $CHROOT/etc/inittab.new $CHROOT/etc/inittab +} +addchroot $CHROOT sed util-linux gzip network-scripts shadow ncurses +mkdir $CHROOT/root $CHROOT/proc +[ $INSTALL_DAEMONTOOLS = no ] || addchroot $CHROOT daemontools + +[ $STRIP_QMAIL_USERS_GROUPS != yes ] || +{ + mount -tproc proc $CHROOT/proc + + for i in alias qmail{d,l,p,q,r,s} + do + grep -q ^$i: $CHROOT/etc/passwd && chroot $CHROOT userdel $i + done + for i in nofiles qmail + do + grep -q ^$i: $CHROOT/etc/group && chroot $CHROOT groupdel $i + done + umount $CHROOT/proc +} + +# inst_check needs these +addchroot $CHROOT procps-ng gawk net-tools diff --git a/network/netqmail/useradd_functions b/network/netqmail/useradd_functions new file mode 100644 index 0000000000..b7711224d1 --- /dev/null +++ b/network/netqmail/useradd_functions @@ -0,0 +1,10 @@ +useradd() +{ + ADDED_USERS=$ADDED_USERS' '$(echo "$@"|rev|cut -f1 -d' '|rev) + /usr/sbin/useradd "$@" +} +groupadd() +{ + ADDED_GROUPS=$ADDED_GROUPS' '$(echo "$@"|rev|cut -f1 -d' '|rev) + /usr/sbin/groupadd "$@" +} |