5 files changed, 175 insertions, 0 deletions
diff --git a/network/iscsitarget/README b/network/iscsitarget/README
new file mode 100644
index 0000000000..20a52e1e95
--- /dev/null
+++ b/network/iscsitarget/README
@@ -0,0 +1,5 @@
+The aim of the project is to develop an open source iSCSI target with 
+professional features, that works well in enterprise environment under 
+real workload, and is scalable and versatile enough to meet the challenge 
+of future storage needs and developments.  This package makes all bindings 
+that are supported on the system.
diff --git a/network/iscsitarget/doinst.sh b/network/iscsitarget/doinst.sh
new file mode 100644
index 0000000000..5643f528ba
--- /dev/null
+++ b/network/iscsitarget/doinst.sh
@@ -0,0 +1,31 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.iscsi-target.new
+config etc/iet/initiators.allow.new
+config etc/iet/targets.allow.new
+config etc/iet/ietd.conf.new
+
+chroot . /sbin/depmod -a 2>/dev/null 1>/dev/null
+
diff --git a/network/iscsitarget/iscsitarget.SlackBuild b/network/iscsitarget/iscsitarget.SlackBuild
new file mode 100644
index 0000000000..cbcc186dfc
--- /dev/null
+++ b/network/iscsitarget/iscsitarget.SlackBuild
@@ -0,0 +1,110 @@
+#!/bin/sh
+
+# Slackware build script for iSCSI Enterprise Target
+
+# Copyright 2010, mario <mario@slackverse.org>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=iscsitarget
+VERSION=${VERSION:-1.4.20.1}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+KERNEL=${KERNEL:-$(uname -r)}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+else
+  SLKCFLAGS="-O2"
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+make \
+  OPTS="$SLKCFLAGS" \
+  MANDIR=/usr/man \
+  DOCDIR=/usr/doc/$PRGNAM-$VERSION \
+  KSRC=/lib/modules/$KERNEL/build \
+
+make install \
+  MANDIR=/usr/man \
+  DOCDIR=/usr/doc/$PRGNAM-$VERSION \
+  KSRC=/lib/modules/$KERNEL/build \
+  DISTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# Rename init script and don't clobber existing config files on upgrade
+mv $PKG/etc/rc.d/iscsi-target $PKG/etc/rc.d/rc.iscsi-target.new
+mv $PKG/etc/iet/initiators.allow $PKG/etc/iet/initiators.allow.new
+mv $PKG/etc/iet/targets.allow $PKG/etc/iet/targets.allow.new
+mv $PKG/etc/iet/ietd.conf $PKG/etc/iet/ietd.conf.new
+
+# Remove some cruft that shouldn't be in the package
+rm -f $PKG/lib/modules/$KERNEL/modules*
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  COPYING ChangeLog README README.initiators README.mcs README.vmware RELEASE_NOTES \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/iscsitarget/iscsitarget.info b/network/iscsitarget/iscsitarget.info
new file mode 100644
index 0000000000..1ff8f0892b
--- /dev/null
+++ b/network/iscsitarget/iscsitarget.info
@@ -0,0 +1,10 @@
+PRGNAM="iscsitarget"
+VERSION="1.4.20.1"
+HOMEPAGE="http://iscsitarget.sourceforge.net/"
+DOWNLOAD="http://downloads.sourceforge.net/iscsitarget/iscsitarget-1.4.20.1.tar.gz"
+MD5SUM="6e5e641b832d420e030d5efb59eca7ce"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="mario"
+EMAIL="mario@slackverse.org"
+APPROVED="rworkman"
diff --git a/network/iscsitarget/slack-desc b/network/iscsitarget/slack-desc
new file mode 100644
index 0000000000..93722c26b2
--- /dev/null
+++ b/network/iscsitarget/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+iscsitarget: iscsitarget (iSCSI Enterprise Target)
+iscsitarget:
+iscsitarget: iSCSI Enterprise Target is for building an iSCSI storage system 
+iscsitarget: on Linux. It is aimed at developing an iSCSI target satisfying
+iscsitarget: enterprise requirements.
+iscsitarget:
+iscsitarget: http://iscsitarget.sourceforge.net/
+iscsitarget:
+iscsitarget:
+iscsitarget:
+iscsitarget: