7 files changed, 144 insertions, 0 deletions
diff --git a/network/fping6/README b/network/fping6/README
new file mode 100644
index 0000000000..f989e116d1
--- /dev/null
+++ b/network/fping6/README
@@ -0,0 +1,4 @@
+fping is a ping(1) like program which uses the Internet Control Message
+Protocol (ICMP) echo request to determine if a host is up. fping is
+different from ping in that you can specify any number of hosts on the
+command line, or specify a file containing the lists of hosts to ping.
diff --git a/network/fping6/README.SLACKWARE b/network/fping6/README.SLACKWARE
new file mode 100644
index 0000000000..b6e36445f0
--- /dev/null
+++ b/network/fping6/README.SLACKWARE
@@ -0,0 +1,6 @@
+The download link points to Debian server, as the package on the original site
+actually is missing IPv6 support - while it claims to be version 2.4b2_to-ipv6,
+it's actually 2.4b2_to.
+Additionally, patches from Debian are applied to make IPv6 compile time flag,
+introduce source IP support, improve manpage and other things.
+To avoid conflicts with standard fping, this version is installed as fping6.
diff --git a/network/fping6/fping.8.diff.gz b/network/fping6/fping.8.diff.gz
new file mode 100644
index 0000000000..2c37b3f0c9
--- /dev/null
+++ b/network/fping6/fping.8.diff.gz
diff --git a/network/fping6/fping.c.diff.gz b/network/fping6/fping.c.diff.gz
new file mode 100644
index 0000000000..26c053c9c0
--- /dev/null
+++ b/network/fping6/fping.c.diff.gz
diff --git a/network/fping6/fping6.SlackBuild b/network/fping6/fping6.SlackBuild
new file mode 100644
index 0000000000..4f22991fc6
--- /dev/null
+++ b/network/fping6/fping6.SlackBuild
@@ -0,0 +1,104 @@
+#!/bin/sh
+
+# Slackware build script for fping with IPv6 and source IP setting
+# support
+# Copyright (c) 2008, Written by Mark Walling <mark@markwalling.org>
+# IPv6 modifications by Richlv
+
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# * Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=fping6
+VERSION=2.4b2_to_ipv6
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+PRGNAM_ARCHIVE=fping
+VERSION_ARCHIVE=2.4b2-to-ipv6
+VERSION_SOURCE=2.4b2_to-ipv6
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686 -DIPV6=1"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -DIPV6=1"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC -DIPV6=1"
+  LIBDIRSUFFIX="64"
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar -xvf $CWD/${PRGNAM_ARCHIVE}_$VERSION_ARCHIVE.orig.tar.gz
+cd ${PRGNAM_ARCHIVE}-$VERSION_SOURCE
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+zcat $CWD/fping.c.diff.gz | patch || exit
+zcat $CWD/fping.8.diff.gz | patch || exit
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man
+
+make
+make install DESTDIR=$PKG
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null || true
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null || true
+)
+
+mv $PKG/usr/man/man8/$PRGNAM_ARCHIVE.8 $PKG/usr/man/man8/$PRGNAM.8
+mv $PKG/usr/sbin/$PRGNAM_ARCHIVE $PKG/usr/sbin/$PRGNAM
+
+( cd $PKG/usr/man
+  find . -type f -exec gzip -9 {} \;
+  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+)
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a COPYING ChangeLog README INSTALL $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/fping6/fping6.info b/network/fping6/fping6.info
new file mode 100644
index 0000000000..fb04db67ee
--- /dev/null
+++ b/network/fping6/fping6.info
@@ -0,0 +1,10 @@
+PRGNAM="fping6"
+VERSION="2.4b2_to-ipv6"
+HOMEPAGE="http://www.fping.com"
+DOWNLOAD="http://ftp.de.debian.org/debian/pool/main/f/fping/fping_2.4b2-to-ipv6.orig.tar.gz"
+DOWNLOAD_x86_64=""
+MD5SUM="3ad516765514249a40d3c5b6caab812a"
+MD5SUM_x86_64=""
+MAINTAINER="Richlv"
+EMAIL="richlv@nakts.net"
+APPROVED="dsomero"
diff --git a/network/fping6/slack-desc b/network/fping6/slack-desc
new file mode 100644
index 0000000000..19be9845ba
--- /dev/null
+++ b/network/fping6/slack-desc
@@ -0,0 +1,20 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler--------------------------------------------------------|
+fping6: fping6 (a ping like program to send ICMP echo requests to IPv6 hosts)
+fping6:
+fping6: fping6 is a ping(1) like program which uses the Internet Control
+fping6: Message Protocol (ICMP) echo request to determine if a host is up.
+fping6: fping6 is different from ping in that you can specify any number of
+fping6: hosts on the command line, or specify a file containing the lists of
+fping6: hosts to ping.
+fping6: This version of fping is compiled with IPv6 support, and additional
+fping6: changes from Debian patch (including source address support).
+fping6:
+fping6: http://www.fping.com/
+fping6: http://packages.debian.org/sid/fping