6 files changed, 0 insertions, 142 deletions
diff --git a/misc/iscan-firmware/README b/misc/iscan-firmware/README
deleted file mode 100644
index f9cd800fe5..0000000000
--- a/misc/iscan-firmware/README
+++ /dev/null
@@ -1,8 +0,0 @@
-This is the firmware files for EPSON USB scanners, 
-which are required to get them to run with the 
-sane "snapscan" backend.
-
-After installing, you will have to read 
-/usr/doc/iscan-firmware-2.8.0.1/README.Slackware
-and follow the instructions inside, or this package 
-will not work for you.
diff --git a/misc/iscan-firmware/README.Slackware b/misc/iscan-firmware/README.Slackware
deleted file mode 100644
index 791874fdb5..0000000000
--- a/misc/iscan-firmware/README.Slackware
+++ /dev/null
@@ -1,37 +0,0 @@
-README.Slackware	20071120
-rworkman@slackbuilds.org
-
-You will need to append the following to the /etc/sane.d/snapscan.conf
-file on your system if it's not already there.  Note that some (or all)
-of these may already be present if this is an upgrade of iscan-firmware
-or you've previously had it installed.  
-
-You will have uncomment the entry for your scanner.
-
-
-#-------------- EPSON Image Scan! for Linux Scanner-Firmware --------------
-
-# Perfection 2480/2580 PHOTO (esfw41.bin)
-#firmware /usr/share/iscan/esfw41.bin
-
-# Perfection 3170 PHOTO (esfw32.bin)
-#firmware /usr/share/iscan/esfw32.bin
-
-# Perfection 3490/3590 PHOTO (esfw52.bin)
-#firmware /usr/share/iscan/esfw52.bin
-
-# Perfection 4180 PHOTO (esfw43.bin)
-#firmware /usr/share/iscan/esfw43.bin
-
-# Perfection 4490 PHOTO (esfw54.bin)
-#firmware /usr/share/iscan/esfw54.bin
-
-# Perfection V10/V100 PHOTO (esfw66.bin)
-#firmware /usr/share/iscan/esfw66.bin
-
-# Perfection V350 PHOTO (esfw68.bin)
-#firmware /usr/share/iscan/esfw68.bin
-
-# Perfection V200 PHOTO (esfw7A.bin)
-#firmware /usr/share/iscan/esfw7A.bin
-
diff --git a/misc/iscan-firmware/doinst.sh b/misc/iscan-firmware/doinst.sh
deleted file mode 100644
index ee39ba83e6..0000000000
--- a/misc/iscan-firmware/doinst.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-echo
-echo Be sure to read /usr/doc/iscan-firmware-2.8.0.1/README.Slackware
-echo for instructions on adding support for loading firmware to your
-echo /etc/sane.d/snapscan.conf file.
-echo 
diff --git a/misc/iscan-firmware/iscan-firmware.SlackBuild b/misc/iscan-firmware/iscan-firmware.SlackBuild
deleted file mode 100644
index b008405782..0000000000
--- a/misc/iscan-firmware/iscan-firmware.SlackBuild
+++ /dev/null
@@ -1,65 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for iscan-firmware
-
-# Copyright 2006-2007  Manuel Reimer  (Manuel.Reimer@gmx.de)
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=iscan-firmware
-VERSION=2.8.0.1
-RPMBUILD=11 # <-- This is the build number used by OpenSuSE in their RPM
-ARCH=${ARCH:-noarch}
-BUILD=${BUILD:-2}
-TAG=${TAG:-_SBo}
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-mkdir $PRGNAM-$VERSION
-cd $PRGNAM-$VERSION
-rpm2cpio $CWD/$PRGNAM-$VERSION-$RPMBUILD.noarch.rpm | cpio -imdv
-chown -R root:root .
-chmod -R u+w,go+r-w,a-s .
-cd usr/share
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-# All license files are in the directory of the "iscan-plugin-gt-f520-1.0.0"
-# and we only need them once
-cp -a doc/packages/iscan-firmware/iscan-plugin-gt-f520-1.0.0/* \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/README.Slackware > $PKG/usr/doc/$PRGNAM-$VERSION/README.Slackware
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/usr/share/iscan
-cp -a iscan/* $PKG/usr/share/iscan
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/misc/iscan-firmware/iscan-firmware.info b/misc/iscan-firmware/iscan-firmware.info
deleted file mode 100644
index d3f51b76e7..0000000000
--- a/misc/iscan-firmware/iscan-firmware.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="iscan-firmware"
-VERSION="2.8.0.1"
-HOMEPAGE="http://www.avasys.jp/english/linux_e/index.html"
-DOWNLOAD="http://download.opensuse.org/distribution/10.3/repo/non-oss/suse/noarch/iscan-firmware-2.8.0.1-11.noarch.rpm"
-MD5SUM="a6df3bdd35b12cd784b4439fb0b6524c"
-MAINTAINER="Manuel Reimer"
-EMAIL="Manuel.Reimer@gmx.de"
-APPROVED="rworkman"
diff --git a/misc/iscan-firmware/slack-desc b/misc/iscan-firmware/slack-desc
deleted file mode 100644
index 2e2924b86c..0000000000
--- a/misc/iscan-firmware/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-              |-----handy-ruler------------------------------------------------------|
-iscan-firmware: iscan-firmware (firmware files for EPSON USB scanners)
-iscan-firmware: 
-iscan-firmware: This is the firmware files for EPSON USB scanners, which are
-iscan-firmware: required to get them to run with the sane "snapscan" backend.
-iscan-firmware: 
-iscan-firmware: After installing, you have to uncomment the line which matches
-iscan-firmware: for your scanner in the file "/etc/sane.d/snapscan.conf".
-iscan-firmware: 
-iscan-firmware: 
-iscan-firmware: 
-iscan-firmware: