6 files changed, 251 insertions, 0 deletions
diff --git a/ham/aprx/README b/ham/aprx/README
new file mode 100644
index 0000000000..ed741bf033
--- /dev/null
+++ b/ham/aprx/README
@@ -0,0 +1,28 @@
+aprx was originally a receive-only APRS iGate software, now extended to do 
+digipeating, and Tx-iGate. It works on any UNIX-like systems with minimal 
+requirements of system services, or system libraries beyond basic POSIX libc.
+
+The software is to be installed on a suitable UNIX-like system, and its 
+configuration file is then to be adjusted. Then it can:
+* Handle arbitrary number of radio modems connected to itself
+* Optionally relay APRS packets from radio receivers to APRS-IS 
+  (http://www.aprs-is.net) network
+* Optionally digipeat AX.25 packets with and without APRS NEWn-N 
+  paradigm rules
+* Optionally relay APRS packets from APRS-IS network to radio channel 
+  (Tx-iGate)
+
+This software is intended for very limited resources environment, like small 
+embedded-like machines barely able to run the operating system with TCP/IP 
+networking.
+A receive-only Rx-iGate does not need any sort of licenses in most parts of 
+the world where radio amateur hobby is permitted to begin with.
+
+On version 2, aprx has gotten the ability to do APRS Digipeater function, 
+Aprx Tx-iGate, as well as a variation of that called Viscous APRS Digipeater, 
+which is an excellent choice for a Fill-In digipeater like on a mobile 
+station. Viscousness means that it will listen for other copies of same 
+packet for a small configurable number of seconds, and if it hears same 
+packet only once, it will do normal digipeating for it.
+
+aprx can optionall be used with soundmodem in place of a hardware TNC.
diff --git a/ham/aprx/aprx.SlackBuild b/ham/aprx/aprx.SlackBuild
new file mode 100644
index 0000000000..a6ba117547
--- /dev/null
+++ b/ham/aprx/aprx.SlackBuild
@@ -0,0 +1,109 @@
+#!/bin/sh
+# Slackbuild for aprx
+# Written by JK Wood <joshuakwood@gmail.com>
+
+# Slackbuild is released under the Dog-on-Fire License:
+# If use of this script causes your dog to catch on fire,
+# you agree to send me five dollars.  Or a picture
+# of the dog on fire.
+# Otherwise, you're on your own.  I've tested the script
+# on my own computer, and it hasn't broken anything.
+# So if it does it on your computer, that falls in
+# the realm of "Not my problem."
+#
+# Of course, if you'll send a bug report to the above
+# email address, I may be able to see what you did
+# wrong and prevent it from happening in the future.
+# In which case, I may just send YOU five dollars.
+
+# Oh, and feel free to copy it and modify it as you
+# see fit. Or as I see fit. Or as I fit. Although
+# that is unlikely, as I am rather tall.
+
+PRGNAM=aprx
+VERSION=${VERSION:-2.08.svn593}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar -xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --mandir=/usr/man \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --build=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+mv $PKG/etc/aprx.conf $PKG/etc/aprx.conf.new
+mkdir -p $PKG/etc/rc.d
+install -m 644 $CWD/rc.aprx.new $PKG/etc/rc.d
+
+mkdir -p $PKG/usr/share/$PRGNAM/
+cp -a firmware $PKG/usr/share/$PRGNAM
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a ChangeLog INSTALL LICENSE PROTOCOLS README ROADMAP TIMESTAMP-AT-APRSIS TODO \
+  ViscousDigipeater.README ViscousDigipeaterTxEffect.png aprx-complex.conf doc/* \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+find $PKG/usr/doc -name "Makefile" -exec rm {} \;
+find $PKG/usr/doc -type f -exec chmod 644 {} \;
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG${PKGTYPE:-.tgz}
diff --git a/ham/aprx/aprx.info b/ham/aprx/aprx.info
new file mode 100644
index 0000000000..9e274a45b6
--- /dev/null
+++ b/ham/aprx/aprx.info
@@ -0,0 +1,10 @@
+PRGNAM="aprx"
+VERSION="2.08.svn593"
+HOMEPAGE="http://wiki.ham.fi/Aprx.en"
+DOWNLOAD="http://ham.zmailer.org/oh2mqk/aprx/aprx-2.08.svn593.tar.gz"
+MD5SUM="f1b82e728736ca818c34b04bd9fd21dc"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="JK Wood"
+EMAIL="joshuakwood@gmail.com"
diff --git a/ham/aprx/doinst.sh b/ham/aprx/doinst.sh
new file mode 100644
index 0000000000..514791d8bb
--- /dev/null
+++ b/ham/aprx/doinst.sh
@@ -0,0 +1,16 @@
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+# Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/aprx.conf.new
+config etc/rc.d/rc.aprx.new
diff --git a/ham/aprx/rc.aprx.new b/ham/aprx/rc.aprx.new
new file mode 100644
index 0000000000..d5cc498eca
--- /dev/null
+++ b/ham/aprx/rc.aprx.new
@@ -0,0 +1,69 @@
+#!/bin/sh
+#
+# aprx daemon control script.
+# Written for Slackware Linux by JK Wood <joshuakwood@gmail.com>
+
+BIN=/sbin/aprx
+CONF=/etc/aprx.conf
+PID=/var/run/aprx.pid
+
+aprx_start() {
+  # Sanity checks.
+  if [ ! -r $CONF ]; then # no config file, exit:
+    echo "$CONF does not appear to exist. Abort."
+    exit 1
+  fi
+
+  if [ -s $PID ]; then
+    echo "aprx appears to already be running?"
+    exit 1
+  fi
+
+  echo "Starting aprx daemon..."
+  if [ -x $BIN ]; then
+    $BIN -f $CONF
+  fi
+}
+
+aprx_stop() {
+  echo "Shutdown aprx gracefully..."
+  if [ -r $PID ]; then
+    kill -HUP $(cat $PID)
+    rm -f $PID
+  else
+    killall -HUP -q aprx
+  fi
+  echo
+}
+
+aprx_restart() {
+  aprx_stop
+  sleep 3
+  aprx_start
+}
+
+aprx_status() {
+  if [ -e $PID ]; then
+    echo "aprx is running."
+  else
+    echo "arpx is stopped."
+    exit 1
+  fi
+}
+
+case "$1" in
+  start)
+    aprx_start
+    ;;
+  stop)
+    aprx_stop
+    ;;
+  restart)
+    aprx_restart
+    ;;
+  status)
+    aprx_status
+    ;;
+  *)
+  echo "usage: `basename $0` {start|stop|restart|status}"
+esac
diff --git a/ham/aprx/slack-desc b/ham/aprx/slack-desc
new file mode 100644
index 0000000000..df8b8c60cc
--- /dev/null
+++ b/ham/aprx/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+    |-----handy-ruler------------------------------------------------------|
+aprx: aprx (APRS software package)
+aprx:
+aprx: Aprx was originally a receive-only APRS iGate software, now extended 
+aprx: to do digipeating, and Tx-iGate. It works on any UNIX-like systems 
+aprx: with minimal requirements of system services, or system libraries 
+aprx: beyond basic POSIX libc. 
+aprx:
+aprx:
+aprx:
+aprx: Homepage: http://wiki.ham.fi/Aprx.en 
+aprx: