4 files changed, 122 insertions, 0 deletions
diff --git a/graphics/dxftoqet/README b/graphics/dxftoqet/README
new file mode 100644
index 0000000000..66bb971756
--- /dev/null
+++ b/graphics/dxftoqet/README
@@ -0,0 +1,2 @@
+dxftoqet is a small utility that converts a DXF element to an elmt
+element, for use with QElectroTech.
diff --git a/graphics/dxftoqet/dxftoqet.SlackBuild b/graphics/dxftoqet/dxftoqet.SlackBuild
new file mode 100644
index 0000000000..1a65154af5
--- /dev/null
+++ b/graphics/dxftoqet/dxftoqet.SlackBuild
@@ -0,0 +1,91 @@
+#!/bin/sh
+
+# Slackware build script for dxftoqet
+
+# Copyright (c) 2017, Axel Bergerhoff <the.druid@arcor.de>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=dxftoqet
+VERSION=${VERSION:-160326}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+qmake-qt5 \
+  QMAKE_CFLAGS+="$SLKCFLAGS" \
+  QMAKE_CXXFLAGS+="$SLKCFLAGS"
+
+make
+
+install -d $PKG/usr/bin
+install -v -m755 DXFtoQET $PKG/usr/bin/
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/graphics/dxftoqet/dxftoqet.info b/graphics/dxftoqet/dxftoqet.info
new file mode 100644
index 0000000000..8b56766672
--- /dev/null
+++ b/graphics/dxftoqet/dxftoqet.info
@@ -0,0 +1,10 @@
+PRGNAM="dxftoqet"
+VERSION="160326"
+HOMEPAGE="https://qelectrotech.org/"
+DOWNLOAD="http://download.tuxfamily.org/qet/builds/dxf_to_elmt/sources/dxftoqet-160326.tar.gz"
+MD5SUM="cb9db33a4709cc9b38b2948136c6c58c"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="qt5"
+MAINTAINER="Axel Bergerhoff"
+EMAIL="the.druid@arcor.de"
diff --git a/graphics/dxftoqet/slack-desc b/graphics/dxftoqet/slack-desc
new file mode 100644
index 0000000000..f34f8a2a40
--- /dev/null
+++ b/graphics/dxftoqet/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+dxftoqet: dxftoqet (Element DXF Converter)
+dxftoqet:
+dxftoqet: This is a utility that converts a DXF element to an elmt element, for
+dxftoqet: use with QElectroTech.
+dxftoqet:
+dxftoqet:
+dxftoqet:
+dxftoqet:
+dxftoqet:
+dxftoqet:
+dxftoqet: