diff options
Diffstat (limited to 'development')
| -rw-r--r-- | development/teensy_loader_cli/49-teensy.rules | 30 | ||||
| -rw-r--r-- | development/teensy_loader_cli/README | 14 | ||||
| -rw-r--r-- | development/teensy_loader_cli/slack-desc | 19 | ||||
| -rw-r--r-- | development/teensy_loader_cli/teensy_loader_cli.SlackBuild | 77 | ||||
| -rw-r--r-- | development/teensy_loader_cli/teensy_loader_cli.info | 12 |
5 files changed, 152 insertions, 0 deletions
diff --git a/development/teensy_loader_cli/49-teensy.rules b/development/teensy_loader_cli/49-teensy.rules new file mode 100644 index 0000000000..b8d3cc7411 --- /dev/null +++ b/development/teensy_loader_cli/49-teensy.rules @@ -0,0 +1,30 @@ +# This file must be placed at: +# +# /etc/udev/rules.d/49-teensy.rules (preferred location) +# or +# /lib/udev/rules.d/49-teensy.rules (req'd on some broken systems) +# +# +SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", MODE:="0666" +KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", SYMLINK+="ttyUSB00%n", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1" +# +# If you share your linux system with other users, or just don't like the +# idea of write permission for everybody, you can replace MODE:="0666" with +# OWNER:="yourusername" to create the device owned by you, or with +# GROUP:="somegroupname" and mange access using standard unix groups. +# +# +# If using USB Serial you get a new device each time (Ubuntu 9.10) +# eg: /dev/ttyACM0, ttyACM1, ttyACM2, ttyACM3, ttyACM4, etc +# apt-get remove --purge modemmanager (reboot may be necessary) +# +# +# Older modem proding (eg, Ubuntu 9.04) caused very slow serial device detection. +# To fix, add this near top of /lib/udev/rules.d/77-nm-probe-modem-capabilities.rules +# SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", GOTO="nm_modem_probe_end" +# +# +# (old udev rules) +#SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="047[78]", MODE:="0666" +#SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="048[02]", MODE:="0666" +#KERNEL=="ttyACM*", SYMLINK+="ttyUSB00%n", MODE:="0666" diff --git a/development/teensy_loader_cli/README b/development/teensy_loader_cli/README new file mode 100644 index 0000000000..2318886f4f --- /dev/null +++ b/development/teensy_loader_cli/README @@ -0,0 +1,14 @@ +The Teensy is a complete USB-based microcontoller development +system, in a very small footprint, capable of implementing many +types of projects. All programming is done via the USB port. No +special programmer is needed, only a standard "Mini-B" USB cable. + +The Teensy Loader program communicates with your Teensy board +when the HalfKay bootloader is running, so you can download new +programs and run them. + +The Teensy Loader is available in a command line version to +automate programming, typically using a Makefile. + +This contains only the cli version of the Teensy Loader. To run +it type: teensy_loader_cli. diff --git a/development/teensy_loader_cli/slack-desc b/development/teensy_loader_cli/slack-desc new file mode 100644 index 0000000000..e168471f56 --- /dev/null +++ b/development/teensy_loader_cli/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +teensy_loader_cli: teensy_loader_cli (Teensy CLI downloader) +teensy_loader_cli: +teensy_loader_cli: The Teensy is a complete USB-based microcontoller development system, +teensy_loader_cli: in a very small footprint, capable of implementing many types of +teensy_loader_cli: projects. All programming is done via the USB port. No special +teensy_loader_cli: programmer is needed, only a standard "Mini-B" USB cable. +teensy_loader_cli: +teensy_loader_cli: The Teensy Loader program communicates with your Teensy board when the +teensy_loader_cli: HalfKay bootloader is running, so you can download new programs and +teensy_loader_cli: run them. The Teensy CLI Loader is a command line version to +teensy_loader_cli: automate programming, typically using a Makefile. diff --git a/development/teensy_loader_cli/teensy_loader_cli.SlackBuild b/development/teensy_loader_cli/teensy_loader_cli.SlackBuild new file mode 100644 index 0000000000..7868ed85f2 --- /dev/null +++ b/development/teensy_loader_cli/teensy_loader_cli.SlackBuild @@ -0,0 +1,77 @@ +#!/bin/sh + +# Slackware build script for teensy + +# Written by Felix Pfeifer (pfeifer [dot] felix [at] googlemail [dot] com) + +PRGNAM=teensy_loader_cli +VERSION=${VERSION:-2.0} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i486 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM +tar xvf $CWD/$PRGNAM.$VERSION.tar.gz +cd $PRGNAM +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +make + +mkdir -p $PKG/usr/bin +cp $PRGNAM $PKG/usr/bin/ + +mkdir -p $PKG/etc/udev/rules.d +cp $CWD/49-teensy.rules $PKG/etc/udev/rules.d + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/example-hex-files +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild +cat gpl3.txt > $PKG/usr/doc/$PRGNAM-$VERSION/COPYING.txt +cp *.hex $PKG/usr/doc/$PRGNAM-$VERSION/example-hex-files + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} + diff --git a/development/teensy_loader_cli/teensy_loader_cli.info b/development/teensy_loader_cli/teensy_loader_cli.info new file mode 100644 index 0000000000..b4048904a4 --- /dev/null +++ b/development/teensy_loader_cli/teensy_loader_cli.info @@ -0,0 +1,12 @@ +PRGNAM="teensy_loader_cli" +VERSION="2.0" +HOMEPAGE="http://www.pjrc.com/teensy/loader_cli.html" +DOWNLOAD="http://www.pjrc.com/teensy/teensy_loader_cli.2.0.tar.gz \ + http://www.pjrc.com/teensy/49-teensy.rules" +MD5SUM="29376dce1b37826c91839a53cff75dc0 \ + a703a15303e4afb20079e297d14fed8e" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +MAINTAINER="Felix Pfeifer" +EMAIL="pfeifer[dot]felix[at]googlemail[dot]com" +APPROVED="Niels Horn" |