5 files changed, 163 insertions, 0 deletions
diff --git a/development/gnustep-make/README b/development/gnustep-make/README
new file mode 100644
index 0000000000..e0d549855a
--- /dev/null
+++ b/development/gnustep-make/README
@@ -0,0 +1,9 @@
+GNUstep is a free, object-oriented, cross-platform development environment
+that strives for simplicity and elegance.  GNUstep is based on and completely
+compatible with the OpenStep specification developed by NeXT (now Apple
+Computer Inc.) as well as implementing the extensions added by Apple in the
+form of Cocoa.
+
+This package contains GNUstep-make component of the core libraries needed to
+write non-graphic tools in Objective-C.  It allows you to setup a simple and
+powerful system for building, installing and packaging your tools.
diff --git a/development/gnustep-make/doinst.sh b/development/gnustep-make/doinst.sh
new file mode 100644
index 0000000000..60f3167d48
--- /dev/null
+++ b/development/gnustep-make/doinst.sh
@@ -0,0 +1,15 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/GNUstep/GNUstep.conf.new
+
diff --git a/development/gnustep-make/gnustep-make.SlackBuild b/development/gnustep-make/gnustep-make.SlackBuild
new file mode 100644
index 0000000000..48ff3f0a01
--- /dev/null
+++ b/development/gnustep-make/gnustep-make.SlackBuild
@@ -0,0 +1,110 @@
+#!/bin/sh
+
+# Slackware build script for gnustep-make
+#
+# Copyright 2013 Christopher Walker Copperas Cove, TX
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=gnustep-make
+VERSION=${VERSION:-2.6.3}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+chmod -R a-s,u+rw,go+r-w .
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --with-layout=fhs-system \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --with-config-file=/etc/GNUstep/GNUstep.conf \
+  --with-library-combo=gnu-gnu-gnu \
+  --build=$ARCH-slackware-linux
+
+# I guess those configure flags are worthless
+sed -i GNUstep.conf \
+ -e "s,/usr/share/man,/usr/man,g" \
+ -e "s,/usr/local/share/man,/usr/local/man,g" \
+ -e "s,/usr/share/info,/usr/info,g" \
+ -e "s,/usr/local/share/info,/usr/local/info,g" \
+ -e "s,/usr/lib,/usr/lib${LIBDIRSUFFIX},g" \
+ -e "s,/usr/local/lib,/usr/local/lib${LIBDIRSUFFIX},g"
+
+make
+make install DESTDIR=$PKG
+
+mv $PKG/etc/GNUstep/GNUstep.conf $PKG/etc/GNUstep/GNUstep.conf.new
+
+# Move man pages to correct spot
+mv $PKG/usr/share/man $PKG/usr
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  ANNOUNCE COPYING ChangeLog FAQ GNUstep-HOWTO INSTALL NEWS README README.Packaging RELEASENOTES \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/development/gnustep-make/gnustep-make.info b/development/gnustep-make/gnustep-make.info
new file mode 100644
index 0000000000..b2251a075f
--- /dev/null
+++ b/development/gnustep-make/gnustep-make.info
@@ -0,0 +1,10 @@
+PRGNAM="gnustep-make"
+VERSION="2.6.3"
+HOMEPAGE="http://www.gnustep.org"
+DOWNLOAD="ftp://ftp.gnustep.org/pub/gnustep/core/gnustep-make-2.6.3.tar.gz"
+MD5SUM="a1606e33317b956aa6b34ce47557ccfb"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Christopher Walker"
+EMAIL="kris240376@gmail.com"
diff --git a/development/gnustep-make/slack-desc b/development/gnustep-make/slack-desc
new file mode 100644
index 0000000000..929f57e90c
--- /dev/null
+++ b/development/gnustep-make/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+gnustep-make: gnustep-make (GNUstep build/setup/packaging tool)
+gnustep-make:
+gnustep-make: GNUstep is a free, object-oriented, cross-platform development
+gnustep-make: environment that strives for simplicity and elegance.  GNUstep is
+gnustep-make: based on and completely compatible with the OpenStep specification
+gnustep-make: developed by NeXT (now Apple Computer Inc.) as well as implementing
+gnustep-make: the extensions added by Apple in the form of Cocoa.
+gnustep-make:
+gnustep-make: The make package allows you to setup a simple and powerful system for
+gnustep-make: building, installing, and packaging your tools.
+gnustep-make: