diff options
Diffstat (limited to 'audio/tuneit')
| -rw-r--r-- | audio/tuneit/README | 17 | ||||
| -rw-r--r-- | audio/tuneit/fix_manpage.diff | 108 | ||||
| -rw-r--r-- | audio/tuneit/jack_optional.diff | 10075 | ||||
| -rw-r--r-- | audio/tuneit/slack-desc | 19 | ||||
| -rw-r--r-- | audio/tuneit/tuneit.SlackBuild | 89 | ||||
| -rw-r--r-- | audio/tuneit/tuneit.info | 10 |
6 files changed, 0 insertions, 10318 deletions
diff --git a/audio/tuneit/README b/audio/tuneit/README deleted file mode 100644 index 7bac128c9a..0000000000 --- a/audio/tuneit/README +++ /dev/null @@ -1,17 +0,0 @@ -tuneit (A simple command-line instrument tuner) - -Tune-it uses two different algorithms for pitch detection. By default, -a simple and fast Schmitt Trigger based algorithm is used to detect the -fundamental frequency of an instrument. For better and more reliable -results, there is an alternative FFT based algorithm which is much more -CPU intensive. - -As audio capture backends, ALSA and JACK are supported. By default, tuneit -will try to use the hw:0,0 ALSA device. - -This uses jack an optional dependency, but it is enabled by default in this -build script. If you don't want jack support, then run the script with -USE_JACK=no in the build environment. - -Tip: Unless you're on a really slow ancient system, you probably want -to always run tuneit with the -f option. diff --git a/audio/tuneit/fix_manpage.diff b/audio/tuneit/fix_manpage.diff deleted file mode 100644 index 7a7755c744..0000000000 --- a/audio/tuneit/fix_manpage.diff +++ /dev/null @@ -1,108 +0,0 @@ -diff -Naur tuneit-0.3/src/tuneit.1 tuneit-0.3.patched/src/tuneit.1 ---- tuneit-0.3/src/tuneit.1 2005-01-27 14:30:50.000000000 -0500 -+++ tuneit-0.3.patched/src/tuneit.1 2009-12-25 12:47:26.000000000 -0500 -@@ -1,4 +1,4 @@ --.TH TUNEIT 1 "January 27, 2005" -+.TH TUNEIT 1 "December 25, 2009" - .SH NAME - tuneit \- Simple command line instrument tuner - .SH SYNOPSIS -@@ -6,41 +6,72 @@ - .RI [ options ] - .I captureDevice - .SH DESCRIPTION --\fBtuneit\fP plays Vorbis and MPEG audio files while allowing the user --to choose a new tempo without changing the pitch. -+Tune\-It is a very simple command-line based instrument tuner for Linux. - .PP --The tempo can be interactively controlled by pressing '+' or '-', incrementing --and decrementing the playback tempo by 1 percent respectively. --Use "q" to stop playback. -+It uses two different algorithms for pitch detection. By default, -+a simple and fast Schmitt Trigger based algorithm is used to detect -+the fundamental frequency of an instrument. For better and more reliable -+results, there is an alternative FFT based algorithm which is much more CPU -+intensive. -+.PP -+As audio capture backends, ALSA and JACK are supported. By default, \fBtuneit\fR -+will try to use the hw:0,0 ALSA device. -+.PP -+\fBtuneit\fR captures audio from an audio device and determines the note -+being played, including the distance in cents from the nearest note in -+standard (well\-tempered) tuning. Example display: -+.PP -+Note E ( 329.628Hz): +8 cents ( 331.106Hz) -+.PP -+The example was made by connecting an electric guitar to the sound -+card's mic input and playing the high E string (which was tuned slightly -+sharp). The first Hz value is the standard frequency of the E note, and -+the second is the actual frequency being sampled from the audio device. -+In the example, we need to tune the high E string down slightly. When it -+is correct, \fI+0 cents\fR will be displayed. -+.PP -+To exit, interrupt the program (usually control\-C). -+.PP -+If \fBtuneit\fR's output seems to jump around and never settle on a note, -+try one or more of: -+.PP -+\- Run \fBtuneit\fR with the \fB\-f\fR option. -+.PP -+\- Adjust the volume and/or tone controls of your instrument. -+.PP -+\- If your instrument has more than one pickup (such as an electric -+guitar or bass), try the other pickup. -+.PP -+\- For stringed instruments, try the center harmonic of each string -+(for guitar or bass, this would be the harmonic at the 12th fret). -+.PP -+\- For miked acoustic instruments, try a different microphone, or different -+mic placement. - .SH OPTIONS --\fByatm\fP accepts the following options: --.TP --.BR -b --Begin playing at --.IR time , --given as an offset from the beginning of the file --.RB ( 0:00:00 ). -+\fBtuneit\fR accepts the following options: - .TP --.BR -e --Stop after --.IR duration --seconds of audio have been decoded. -+\-f -+Use the more CPU intensive FFT based algorithm. This is highly recommended, -+unless your system is too slow to support it. - .TP --.BR -t --Specify initial tempo as a floating point value, 1.0 is the default. -+\-i -+List available input ports and exit. - .TP --.BR -q --Inhibit usual output. -+\-j -+Use JACK as the audio transport system (default is to use ALSA). - .TP --.B -v, --verbose --Print more information. -+.B \-l \fILATENCY\fR -+Measurement window size in 1/N seconds (default is 10). - .TP --.B \-h, \-\-help --Show summary of options. -+.B \-r \fIRATE\fR -+Set sample rate (default is 48000). - .TP --.B \-V, \-\-version --Show version of program. -+.B \-t \fIHERTZ\fR -+Tune the A note of the scale (default is 440.0) - .SH "SEE ALSO" - .BR jackd (1), amixer (1). - .SH AUTHOR - Mario Lang <mlang@delysid.org>. -+.PP -+This manual page was written by B. Watson for the SlackBuilds.org -+project, but may be used by others. diff --git a/audio/tuneit/jack_optional.diff b/audio/tuneit/jack_optional.diff deleted file mode 100644 index 77553d11d9..0000000000 --- a/audio/tuneit/jack_optional.diff +++ /dev/null @@ -1,10075 +0,0 @@ -diff -Naur tuneit-0.3/Makefile.in tuneit-0.3.patched/Makefile.in ---- tuneit-0.3/Makefile.in 2005-01-27 14:35:46.000000000 -0500 -+++ tuneit-0.3.patched/Makefile.in 2009-12-25 13:40:33.000000000 -0500 -@@ -1,8 +1,8 @@ --# Makefile.in generated by automake 1.7.9 from Makefile.am. -+# Makefile.in generated by automake 1.10.1 from Makefile.am. - # @configure_input@ - --# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 --# Free Software Foundation, Inc. -+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - # This Makefile.in is free software; the Free Software Foundation - # gives unlimited permission to copy and/or distribute it, - # with or without modifications, as long as this notice is preserved. -@@ -13,17 +13,11 @@ - # PARTICULAR PURPOSE. - - @SET_MAKE@ -- --srcdir = @srcdir@ --top_srcdir = @top_srcdir@ - VPATH = @srcdir@ - pkgdatadir = $(datadir)/@PACKAGE@ - pkglibdir = $(libdir)/@PACKAGE@ - pkgincludedir = $(includedir)/@PACKAGE@ --top_builddir = . -- - am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd --INSTALL = @INSTALL@ - install_sh_DATA = $(install_sh) -c -m 644 - install_sh_PROGRAM = $(install_sh) -c - install_sh_SCRIPT = $(install_sh) -c -@@ -35,9 +29,47 @@ - NORMAL_UNINSTALL = : - PRE_UNINSTALL = : - POST_UNINSTALL = : -+subdir = . -+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ -+ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ -+ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ -+ config.guess config.sub depcomp install-sh missing \ -+ mkinstalldirs -+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -+am__aclocal_m4_deps = $(top_srcdir)/configure.in -+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ -+ $(ACLOCAL_M4) -+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ -+ configure.lineno config.status.lineno -+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -+CONFIG_HEADER = config.h -+CONFIG_CLEAN_FILES = -+SOURCES = -+DIST_SOURCES = -+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ -+ html-recursive info-recursive install-data-recursive \ -+ install-dvi-recursive install-exec-recursive \ -+ install-html-recursive install-info-recursive \ -+ install-pdf-recursive install-ps-recursive install-recursive \ -+ installcheck-recursive installdirs-recursive pdf-recursive \ -+ ps-recursive uninstall-recursive -+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ -+ distclean-recursive maintainer-clean-recursive -+ETAGS = etags -+CTAGS = ctags -+DIST_SUBDIRS = $(SUBDIRS) -+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -+distdir = $(PACKAGE)-$(VERSION) -+top_distdir = $(distdir) -+am__remove_distdir = \ -+ { test ! -d $(distdir) \ -+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ -+ && rm -fr $(distdir); }; } -+DIST_ARCHIVES = $(distdir).tar.gz -+GZIP_ENV = --best -+distuninstallcheck_listfiles = find . -type f -print -+distcleancheck_listfiles = find . -type f -print - ACLOCAL = @ACLOCAL@ --AMDEP_FALSE = @AMDEP_FALSE@ --AMDEP_TRUE = @AMDEP_TRUE@ - AMTAR = @AMTAR@ - AUTOCONF = @AUTOCONF@ - AUTOHEADER = @AUTOHEADER@ -@@ -56,6 +88,8 @@ - ECHO_T = @ECHO_T@ - EGREP = @EGREP@ - EXEEXT = @EXEEXT@ -+GREP = @GREP@ -+INSTALL = @INSTALL@ - INSTALL_DATA = @INSTALL_DATA@ - INSTALL_PROGRAM = @INSTALL_PROGRAM@ - INSTALL_SCRIPT = @INSTALL_SCRIPT@ -@@ -65,6 +99,7 @@ - LIBS = @LIBS@ - LTLIBOBJS = @LTLIBOBJS@ - MAKEINFO = @MAKEINFO@ -+MKDIR_P = @MKDIR_P@ - OBJEXT = @OBJEXT@ - PACKAGE = @PACKAGE@ - PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -@@ -77,88 +112,103 @@ - SHELL = @SHELL@ - STRIP = @STRIP@ - VERSION = @VERSION@ -+abs_builddir = @abs_builddir@ -+abs_srcdir = @abs_srcdir@ -+abs_top_builddir = @abs_top_builddir@ -+abs_top_srcdir = @abs_top_srcdir@ - ac_ct_CC = @ac_ct_CC@ --ac_ct_STRIP = @ac_ct_STRIP@ --am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ --am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ - am__include = @am__include@ - am__leading_dot = @am__leading_dot@ - am__quote = @am__quote@ -+am__tar = @am__tar@ -+am__untar = @am__untar@ - bindir = @bindir@ - build_alias = @build_alias@ -+builddir = @builddir@ - datadir = @datadir@ -+datarootdir = @datarootdir@ -+docdir = @docdir@ -+dvidir = @dvidir@ - exec_prefix = @exec_prefix@ - host_alias = @host_alias@ -+htmldir = @htmldir@ - includedir = @includedir@ - infodir = @infodir@ - install_sh = @install_sh@ - libdir = @libdir@ - libexecdir = @libexecdir@ -+localedir = @localedir@ - localstatedir = @localstatedir@ - mandir = @mandir@ -+mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -+pdfdir = @pdfdir@ - prefix = @prefix@ - program_transform_name = @program_transform_name@ -+psdir = @psdir@ - sbindir = @sbindir@ - sharedstatedir = @sharedstatedir@ -+srcdir = @srcdir@ - sysconfdir = @sysconfdir@ - target_alias = @target_alias@ -+top_build_prefix = @top_build_prefix@ -+top_builddir = @top_builddir@ -+top_srcdir = @top_srcdir@ - SUBDIRS = src --subdir = . --ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 --mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs --CONFIG_HEADER = config.h --CONFIG_CLEAN_FILES = --DIST_SOURCES = -- --RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ -- ps-recursive install-info-recursive uninstall-info-recursive \ -- all-recursive install-data-recursive install-exec-recursive \ -- installdirs-recursive install-recursive uninstall-recursive \ -- check-recursive installcheck-recursive --DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure AUTHORS \ -- COPYING ChangeLog INSTALL Makefile.am NEWS aclocal.m4 \ -- config.guess config.h.in config.sub configure configure.in \ -- depcomp install-sh missing mkinstalldirs --DIST_SUBDIRS = $(SUBDIRS) - all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - - .SUFFIXES: -- --am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ -- configure.lineno --$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) -+am--refresh: -+ @: -+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) -+ @for dep in $?; do \ -+ case '$(am__configure_deps)' in \ -+ *$$dep*) \ -+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ -+ cd $(srcdir) && $(AUTOMAKE) --gnu \ -+ && exit 0; \ -+ exit 1;; \ -+ esac; \ -+ done; \ -+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile --Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status -- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) -+.PRECIOUS: Makefile -+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status -+ @case '$?' in \ -+ *config.status*) \ -+ echo ' $(SHELL) ./config.status'; \ -+ $(SHELL) ./config.status;; \ -+ *) \ -+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ -+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ -+ esac; - --$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) -+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck --$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) -- cd $(srcdir) && $(AUTOCONF) - --$(ACLOCAL_M4): configure.in -+$(top_srcdir)/configure: $(am__configure_deps) -+ cd $(srcdir) && $(AUTOCONF) -+$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - - config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ -- $(MAKE) stamp-h1; \ -+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi - - stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -- --$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) -+$(srcdir)/config.h.in: $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) -- touch $(srcdir)/config.h.in -+ rm -f stamp-h1 -+ touch $@ - - distclean-hdr: - -rm -f config.h stamp-h1 --uninstall-info-am: - - # This directory's subdirectories are mostly independent; you can cd - # into them and run `make' without going through this Makefile. -@@ -167,7 +217,13 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @set fnord $$MAKEFLAGS; amf=$$2; \ -+ @failcom='exit 1'; \ -+ for f in x $$MAKEFLAGS; do \ -+ case $$f in \ -+ *=* | --[!k]*);; \ -+ *k*) failcom='fail=yes';; \ -+ esac; \ -+ done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ -@@ -179,15 +235,20 @@ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ -- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ -+ || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - --mostlyclean-recursive clean-recursive distclean-recursive \ --maintainer-clean-recursive: -- @set fnord $$MAKEFLAGS; amf=$$2; \ -+$(RECURSIVE_CLEAN_TARGETS): -+ @failcom='exit 1'; \ -+ for f in x $$MAKEFLAGS; do \ -+ case $$f in \ -+ *=* | --[!k]*);; \ -+ *k*) failcom='fail=yes';; \ -+ esac; \ -+ done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ -@@ -208,7 +269,7 @@ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ -- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ -+ || eval $$failcom; \ - done && test -z "$$fail" - tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ -@@ -219,35 +280,30 @@ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - --ETAGS = etags --ETAGSFLAGS = -- --CTAGS = ctags --CTAGSFLAGS = -- --tags: TAGS -- - ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -+ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -+tags: TAGS - - TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ -- if (etags --etags-include --version) >/dev/null 2>&1; then \ -+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ -+ empty_fix=.; \ - else \ - include_option=--include; \ -+ empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ -- test -f $$subdir/TAGS && \ -+ test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ -@@ -255,23 +311,23 @@ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -- test -z "$(ETAGS_ARGS)$$tags$$unique" \ -- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -- $$tags $$unique -- -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ -+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ -+ test -n "$$unique" || unique=$$empty_fix; \ -+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -+ $$tags $$unique; \ -+ fi - ctags: CTAGS - CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ -- here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique -@@ -283,39 +339,25 @@ - - distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags --DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -- --top_distdir = . --distdir = $(PACKAGE)-$(VERSION) -- --am__remove_distdir = \ -- { test ! -d $(distdir) \ -- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ -- && rm -fr $(distdir); }; } -- --GZIP_ENV = --best --distuninstallcheck_listfiles = find . -type f -print --distcleancheck_listfiles = find . -type f -print - - distdir: $(DISTFILES) - $(am__remove_distdir) -- mkdir $(distdir) -- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ -- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ -- list='$(DISTFILES)'; for file in $$list; do \ -- case $$file in \ -- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ -- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ -- esac; \ -+ test -d $(distdir) || mkdir $(distdir) -+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ list='$(DISTFILES)'; \ -+ dist_files=`for file in $$list; do echo $$file; done | \ -+ sed -e "s|^$$srcdirstrip/||;t" \ -+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ -+ case $$dist_files in \ -+ */*) $(MKDIR_P) `echo "$$dist_files" | \ -+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ -+ sort -u` ;; \ -+ esac; \ -+ for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ -- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ -- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ -- dir="/$$dir"; \ -- $(mkinstalldirs) "$(distdir)$$dir"; \ -- else \ -- dir=''; \ -- fi; \ - if test -d $$d/$$file; then \ -+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ -@@ -326,15 +368,19 @@ - || exit 1; \ - fi; \ - done -- list='$(SUBDIRS)'; for subdir in $$list; do \ -+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ -- test -d $(distdir)/$$subdir \ -- || mkdir $(distdir)/$$subdir \ -+ test -d "$(distdir)/$$subdir" \ -+ || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ -+ distdir=`$(am__cd) $(distdir) && pwd`; \ -+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ -- top_distdir="$(top_distdir)" \ -- distdir=../$(distdir)/$$subdir \ -+ top_distdir="$$top_distdir" \ -+ distdir="$$distdir/$$subdir" \ -+ am__remove_distdir=: \ -+ am__skip_length_check=: \ - distdir) \ - || exit 1; \ - fi; \ -@@ -342,22 +388,55 @@ - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ -- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ -+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) - dist-gzip: distdir -- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz -+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz -+ $(am__remove_distdir) -+ -+dist-bzip2: distdir -+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 -+ $(am__remove_distdir) -+ -+dist-lzma: distdir -+ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma -+ $(am__remove_distdir) -+ -+dist-tarZ: distdir -+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z -+ $(am__remove_distdir) -+ -+dist-shar: distdir -+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz -+ $(am__remove_distdir) -+ -+dist-zip: distdir -+ -rm -f $(distdir).zip -+ zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - - dist dist-all: distdir -- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz -+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - - # This target untars the dist file and tries a VPATH configuration. Then - # it guarantees that the distribution is self-contained by making another - # tarfile. - distcheck: dist -- $(am__remove_distdir) -- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - -+ case '$(DIST_ARCHIVES)' in \ -+ *.tar.gz*) \ -+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ -+ *.tar.bz2*) \ -+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ -+ *.tar.lzma*) \ -+ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ -+ *.tar.Z*) \ -+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ -+ *.shar.gz*) \ -+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ -+ *.zip*) \ -+ unzip $(distdir).zip ;;\ -+ esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst -@@ -377,19 +456,20 @@ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ -- (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \ -+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ -- && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ -- && rm -f $(distdir).tar.gz \ -+ && $(MAKE) $(AM_MAKEFLAGS) dist \ -+ && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) -- @echo "$(distdir).tar.gz is ready for distribution" | \ -- sed 'h;s/./=/g;p;x;p;x' -+ @(echo "$(distdir) archives ready for distribution: "; \ -+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ -+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' - distuninstallcheck: - @cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ -@@ -413,7 +493,6 @@ - all-am: Makefile config.h - installdirs: installdirs-recursive - installdirs-am: -- - install: install-recursive - install-exec: install-exec-recursive - install-data: install-data-recursive -@@ -433,7 +512,7 @@ - clean-generic: - - distclean-generic: -- -rm -f $(CONFIG_CLEAN_FILES) -+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - - maintainer-clean-generic: - @echo "This command is intended for maintainers to use" -@@ -451,18 +530,28 @@ - - dvi-am: - -+html: html-recursive -+ - info: info-recursive - - info-am: - - install-data-am: - -+install-dvi: install-dvi-recursive -+ - install-exec-am: - -+install-html: install-html-recursive -+ - install-info: install-info-recursive - - install-man: - -+install-pdf: install-pdf-recursive -+ -+install-ps: install-ps-recursive -+ - installcheck-am: - - maintainer-clean: maintainer-clean-recursive -@@ -483,26 +572,25 @@ - - ps-am: - --uninstall-am: uninstall-info-am -+uninstall-am: - --uninstall-info: uninstall-info-recursive -+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ -+ install-strip - --.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \ -- clean-generic clean-recursive ctags ctags-recursive dist \ -- dist-all dist-gzip distcheck distclean distclean-generic \ -- distclean-hdr distclean-recursive distclean-tags distcleancheck \ -- distdir distuninstallcheck dvi dvi-am dvi-recursive info \ -- info-am info-recursive install install-am install-data \ -- install-data-am install-data-recursive install-exec \ -- install-exec-am install-exec-recursive install-info \ -- install-info-am install-info-recursive install-man \ -- install-recursive install-strip installcheck installcheck-am \ -- installdirs installdirs-am installdirs-recursive \ -- maintainer-clean maintainer-clean-generic \ -- maintainer-clean-recursive mostlyclean mostlyclean-generic \ -- mostlyclean-recursive pdf pdf-am pdf-recursive ps ps-am \ -- ps-recursive tags tags-recursive uninstall uninstall-am \ -- uninstall-info-am uninstall-info-recursive uninstall-recursive -+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ -+ all all-am am--refresh check check-am clean clean-generic \ -+ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ -+ dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \ -+ distclean-generic distclean-hdr distclean-tags distcleancheck \ -+ distdir distuninstallcheck dvi dvi-am html html-am info \ -+ info-am install install-am install-data install-data-am \ -+ install-dvi install-dvi-am install-exec install-exec-am \ -+ install-html install-html-am install-info install-info-am \ -+ install-man install-pdf install-pdf-am install-ps \ -+ install-ps-am install-strip installcheck installcheck-am \ -+ installdirs installdirs-am maintainer-clean \ -+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ -+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am - - # Tell versions [3.59,3.63) of GNU make to not export all variables. - # Otherwise a system limit (for SysV at least) may be exceeded. -diff -Naur tuneit-0.3/aclocal.m4 tuneit-0.3.patched/aclocal.m4 ---- tuneit-0.3/aclocal.m4 2005-01-27 14:34:43.000000000 -0500 -+++ tuneit-0.3.patched/aclocal.m4 2009-12-25 13:40:33.000000000 -0500 -@@ -1,7 +1,7 @@ --# generated automatically by aclocal 1.7.9 -*- Autoconf -*- -+# generated automatically by aclocal 1.10.1 -*- Autoconf -*- - --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002 --# Free Software Foundation, Inc. -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -+# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - # This file is free software; the Free Software Foundation - # gives unlimited permission to copy and/or distribute it, - # with or without modifications, as long as this notice is preserved. -@@ -11,332 +11,57 @@ - # even the implied warranty of MERCHANTABILITY or FITNESS FOR A - # PARTICULAR PURPOSE. - --# Do all the work for Automake. -*- Autoconf -*- -- --# This macro actually does too much some checks are only needed if --# your package does certain things. But this isn't really a big deal. -- --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 --# Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- --# serial 10 -- --AC_PREREQ([2.54]) -- --# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow --# the ones we care about. --m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -- --# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) --# AM_INIT_AUTOMAKE([OPTIONS]) --# ----------------------------------------------- --# The call with PACKAGE and VERSION arguments is the old style --# call (pre autoconf-2.50), which is being phased out. PACKAGE --# and VERSION should now be passed to AC_INIT and removed from --# the call to AM_INIT_AUTOMAKE. --# We support both call styles for the transition. After --# the next Automake release, Autoconf can make the AC_INIT --# arguments mandatory, and then we can depend on a new Autoconf --# release and drop the old call support. --AC_DEFUN([AM_INIT_AUTOMAKE], --[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -- AC_REQUIRE([AC_PROG_INSTALL])dnl --# test to see if srcdir already configured --if test "`cd $srcdir && pwd`" != "`pwd`" && -- test -f $srcdir/config.status; then -- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) --fi -- --# test whether we have cygpath --if test -z "$CYGPATH_W"; then -- if (cygpath --version) >/dev/null 2>/dev/null; then -- CYGPATH_W='cygpath -w' -- else -- CYGPATH_W=echo -- fi --fi --AC_SUBST([CYGPATH_W]) -- --# Define the identity of the package. --dnl Distinguish between old-style and new-style calls. --m4_ifval([$2], --[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl -- AC_SUBST([PACKAGE], [$1])dnl -- AC_SUBST([VERSION], [$2])], --[_AM_SET_OPTIONS([$1])dnl -- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl -- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl -- --_AM_IF_OPTION([no-define],, --[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) -- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl -- --# Some tools Automake needs. --AC_REQUIRE([AM_SANITY_CHECK])dnl --AC_REQUIRE([AC_ARG_PROGRAM])dnl --AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) --AM_MISSING_PROG(AUTOCONF, autoconf) --AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) --AM_MISSING_PROG(AUTOHEADER, autoheader) --AM_MISSING_PROG(MAKEINFO, makeinfo) --AM_MISSING_PROG(AMTAR, tar) --AM_PROG_INSTALL_SH --AM_PROG_INSTALL_STRIP --# We need awk for the "check" target. The system "awk" is bad on --# some platforms. --AC_REQUIRE([AC_PROG_AWK])dnl --AC_REQUIRE([AC_PROG_MAKE_SET])dnl --AC_REQUIRE([AM_SET_LEADING_DOT])dnl -- --_AM_IF_OPTION([no-dependencies],, --[AC_PROVIDE_IFELSE([AC_PROG_CC], -- [_AM_DEPENDENCIES(CC)], -- [define([AC_PROG_CC], -- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl --AC_PROVIDE_IFELSE([AC_PROG_CXX], -- [_AM_DEPENDENCIES(CXX)], -- [define([AC_PROG_CXX], -- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl --]) --]) -- -- --# When config.status generates a header, we must update the stamp-h file. --# This file resides in the same directory as the config header --# that is generated. The stamp files are numbered to have different names. -- --# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the --# loop where config.status creates the headers, so we can generate --# our stamp files there. --AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], --[# Compute $1's index in $config_headers. --_am_stamp_count=1 --for _am_header in $config_headers :; do -- case $_am_header in -- $1 | $1:* ) -- break ;; -- * ) -- _am_stamp_count=`expr $_am_stamp_count + 1` ;; -- esac --done --echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) -- --# Copyright 2002 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+m4_ifndef([AC_AUTOCONF_VERSION], -+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -+m4_if(AC_AUTOCONF_VERSION, [2.63],, -+[m4_warning([this file was generated for autoconf 2.63. -+You have another version of autoconf. It may work, but is not guaranteed to. -+If you have problems, you may need to regenerate the build system entirely. -+To do so, use the procedure documented by the package, typically `autoreconf'.])]) - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -+# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - - # AM_AUTOMAKE_VERSION(VERSION) - # ---------------------------- - # Automake X.Y traces this macro to ensure aclocal.m4 has been - # generated from the m4 files accompanying Automake X.Y. --AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"]) -+# (This private macro should not be called outside this file.) -+AC_DEFUN([AM_AUTOMAKE_VERSION], -+[am__api_version='1.10' -+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -+dnl require some minimum version. Point them to the right macro. -+m4_if([$1], [1.10.1], [], -+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -+]) -+ -+# _AM_AUTOCONF_VERSION(VERSION) -+# ----------------------------- -+# aclocal traces this macro to find the Autoconf version. -+# This is a private macro too. Using m4_define simplifies -+# the logic in aclocal, which can simply ignore this definition. -+m4_define([_AM_AUTOCONF_VERSION], []) - - # AM_SET_CURRENT_AUTOMAKE_VERSION - # ------------------------------- --# Call AM_AUTOMAKE_VERSION so it can be traced. -+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. - # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. - AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -- [AM_AUTOMAKE_VERSION([1.7.9])]) -- --# Helper functions for option handling. -*- Autoconf -*- -- --# Copyright 2001, 2002 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- --# serial 2 -- --# _AM_MANGLE_OPTION(NAME) --# ----------------------- --AC_DEFUN([_AM_MANGLE_OPTION], --[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) -- --# _AM_SET_OPTION(NAME) --# ------------------------------ --# Set option NAME. Presently that only means defining a flag for this option. --AC_DEFUN([_AM_SET_OPTION], --[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) -- --# _AM_SET_OPTIONS(OPTIONS) --# ---------------------------------- --# OPTIONS is a space-separated list of Automake options. --AC_DEFUN([_AM_SET_OPTIONS], --[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) -+[AM_AUTOMAKE_VERSION([1.10.1])dnl -+m4_ifndef([AC_AUTOCONF_VERSION], -+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -+_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) - --# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) --# ------------------------------------------- --# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. --AC_DEFUN([_AM_IF_OPTION], --[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -+# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. - # --# Check to make sure that the build environment is sane. --# -- --# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- --# serial 3 -- --# AM_SANITY_CHECK --# --------------- --AC_DEFUN([AM_SANITY_CHECK], --[AC_MSG_CHECKING([whether build environment is sane]) --# Just in case --sleep 1 --echo timestamp > conftest.file --# Do `set' in a subshell so we don't clobber the current shell's --# arguments. Must try -L first in case configure is actually a --# symlink; some systems play weird games with the mod time of symlinks --# (eg FreeBSD returns the mod time of the symlink's containing --# directory). --if ( -- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` -- if test "$[*]" = "X"; then -- # -L didn't work. -- set X `ls -t $srcdir/configure conftest.file` -- fi -- rm -f conftest.file -- if test "$[*]" != "X $srcdir/configure conftest.file" \ -- && test "$[*]" != "X conftest.file $srcdir/configure"; then -- -- # If neither matched, then we have a broken ls. This can happen -- # if, for instance, CONFIG_SHELL is bash and it inherits a -- # broken ls alias from the environment. This has actually -- # happened. Such a system could not be considered "sane". -- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken --alias in your environment]) -- fi -- -- test "$[2]" = conftest.file -- ) --then -- # Ok. -- : --else -- AC_MSG_ERROR([newly created file is older than distributed files! --Check your system clock]) --fi --AC_MSG_RESULT(yes)]) -- --# -*- Autoconf -*- -- -- --# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- --# serial 3 -- --# AM_MISSING_PROG(NAME, PROGRAM) --# ------------------------------ --AC_DEFUN([AM_MISSING_PROG], --[AC_REQUIRE([AM_MISSING_HAS_RUN]) --$1=${$1-"${am_missing_run}$2"} --AC_SUBST($1)]) -- -- --# AM_MISSING_HAS_RUN --# ------------------ --# Define MISSING if not defined so far and test if it supports --run. --# If it does, set am_missing_run to use it, otherwise, to nothing. --AC_DEFUN([AM_MISSING_HAS_RUN], --[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl --test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" --# Use eval to expand $SHELL --if eval "$MISSING --run true"; then -- am_missing_run="$MISSING --run " --else -- am_missing_run= -- AC_MSG_WARN([`missing' script is too old or missing]) --fi --]) -- --# AM_AUX_DIR_EXPAND -- --# Copyright 2001 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - - # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets - # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -@@ -376,131 +101,56 @@ - # absolute PATH. The drawback is that using absolute paths prevent a - # configured tree to be moved without reconfiguration. - --# Rely on autoconf to set up CDPATH properly. --AC_PREREQ([2.50]) -- --AC_DEFUN([AM_AUX_DIR_EXPAND], [ -+AC_DEFUN([AM_AUX_DIR_EXPAND], -+[dnl Rely on autoconf to set up CDPATH properly. -+AC_PREREQ([2.50])dnl - # expand $ac_aux_dir to an absolute path - am_aux_dir=`cd $ac_aux_dir && pwd` - ]) - --# AM_PROG_INSTALL_SH --# ------------------ --# Define $install_sh. -- --# Copyright 2001 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# AM_CONDITIONAL -*- Autoconf -*- - --AC_DEFUN([AM_PROG_INSTALL_SH], --[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl --install_sh=${install_sh-"$am_aux_dir/install-sh"} --AC_SUBST(install_sh)]) -+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# AM_PROG_INSTALL_STRIP -+# serial 8 - --# Copyright 2001 Free Software Foundation, Inc. -+# AM_CONDITIONAL(NAME, SHELL-CONDITION) -+# ------------------------------------- -+# Define a conditional. -+AC_DEFUN([AM_CONDITIONAL], -+[AC_PREREQ(2.52)dnl -+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], -+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -+AC_SUBST([$1_TRUE])dnl -+AC_SUBST([$1_FALSE])dnl -+_AM_SUBST_NOTMAKE([$1_TRUE])dnl -+_AM_SUBST_NOTMAKE([$1_FALSE])dnl -+if $2; then -+ $1_TRUE= -+ $1_FALSE='#' -+else -+ $1_TRUE='#' -+ $1_FALSE= -+fi -+AC_CONFIG_COMMANDS_PRE( -+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then -+ AC_MSG_ERROR([[conditional "$1" was never defined. -+Usually this means the macro was only invoked conditionally.]]) -+fi])]) - --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- --# One issue with vendor `install' (even GNU) is that you can't --# specify the program used to strip binaries. This is especially --# annoying in cross-compiling environments, where the build's strip --# is unlikely to handle the host's binaries. --# Fortunately install-sh will honor a STRIPPROG variable, so we --# always use install-sh in `make install-strip', and initialize --# STRIPPROG with the value of the STRIP variable (set by the user). --AC_DEFUN([AM_PROG_INSTALL_STRIP], --[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl --# Installed binaries are usually stripped using `strip' when the user --# run `make install-strip'. However `strip' might not be the right --# tool to use in cross-compilation environments, therefore Automake --# will honor the `STRIP' environment variable to overrule this program. --dnl Don't test for $cross_compiling = yes, because it might be `maybe'. --if test "$cross_compiling" != no; then -- AC_CHECK_TOOL([STRIP], [strip], :) --fi --INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" --AC_SUBST([INSTALL_STRIP_PROGRAM])]) -- --# -*- Autoconf -*- --# Copyright (C) 2003 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- --# serial 1 -- --# Check whether the underlying file-system supports filenames --# with a leading dot. For instance MS-DOS doesn't. --AC_DEFUN([AM_SET_LEADING_DOT], --[rm -rf .tst 2>/dev/null --mkdir .tst 2>/dev/null --if test -d .tst; then -- am__leading_dot=. --else -- am__leading_dot=_ --fi --rmdir .tst 2>/dev/null --AC_SUBST([am__leading_dot])]) -- --# serial 5 -*- Autoconf -*- -- --# Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - -+# serial 9 - - # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be - # written in clear, in which case automake, when reading aclocal.m4, -@@ -509,7 +159,6 @@ - # CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -- - # _AM_DEPENDENCIES(NAME) - # ---------------------- - # See how the compiler implements dependency checking. -@@ -529,6 +178,7 @@ - ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], -+ [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -@@ -568,7 +218,9 @@ - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c -- : > sub/conftst$i.h -+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with -+ # Solaris 8's {/usr,}/bin/sh. -+ touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - -@@ -592,13 +244,19 @@ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && -+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings -- # (even with -Werror). So we grep stderr for any message -- # that says an option was ignored. -- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else -+ # or remarks (even with -Werror). So we grep stderr for any message -+ # that says an option was ignored or not supported. -+ # When given -MP, icc 7.0 and 7.1 complain thusly: -+ # icc: Command line warning: ignoring option '-M'; no argument required -+ # The diagnosis changed in icc 8.0: -+ # icc: Command line remark: option '-MP' not supported -+ if (grep 'ignoring option' conftest.err || -+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi -@@ -632,36 +290,27 @@ - # ------------ - AC_DEFUN([AM_DEP_TRACK], - [AC_ARG_ENABLE(dependency-tracking, --[ --disable-dependency-tracking Speeds up one-time builds -- --enable-dependency-tracking Do not reject slow dependency extractors]) -+[ --disable-dependency-tracking speeds up one-time build -+ --enable-dependency-tracking do not reject slow dependency extractors]) - if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - fi - AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) --AC_SUBST([AMDEPBACKSLASH]) -+AC_SUBST([AMDEPBACKSLASH])dnl -+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl - ]) - --# Generate code to set up dependency tracking. -*- Autoconf -*- -+# Generate code to set up dependency tracking. -*- Autoconf -*- - --# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --#serial 2 -+#serial 3 - - # _AM_OUTPUT_DEPENDENCY_COMMANDS - # ------------------------------ -@@ -674,33 +323,28 @@ - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. -- # So let's grep whole file. -- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then -+ # Grep'ing the whole file is not good either: AIX grep has a line -+ # limit of 2048, but all sed's we know have understand at least 4000. -+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi -- grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue -- # Extract the definition of DEP_FILES from the Makefile without -- # running `make'. -- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` -+ # Extract the definition of DEPDIR, am__include, and am__quote -+ # from the Makefile without running `make'. -+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue -+ am__include=`sed -n 's/^am__include = //p' < "$mf"` -+ test -z "am__include" && continue -+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it -- U=`sed -n -e '/^U = / s///p' < "$mf"` -- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" -- # We invoke sed twice because it is the simplest approach to -- # changing $(DEPDIR) to its actual value in the expansion. -- for file in `sed -n -e ' -- /^DEP_FILES = .*\\\\$/ { -- s/^DEP_FILES = // -- :loop -- s/\\\\$// -- p -- n -- /\\\\$/ b loop -- p -- } -- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ -+ U=`sed -n 's/^U = //p' < "$mf"` -+ # Find all dependency output files, they are included files with -+ # $(DEPDIR) in their names. We invoke sed twice because it is the -+ # simplest approach to changing $(DEPDIR) to its actual value in the -+ # expansion. -+ for file in `sed -n " -+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue -@@ -726,27 +370,189 @@ - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) - ]) - --# Check to see how 'make' treats includes. -*- Autoconf -*- -+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. -+# serial 8 - --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Do all the work for Automake. -*- Autoconf -*- -+ -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -+# 2005, 2006, 2008 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# serial 13 -+ -+# This macro actually does too much. Some checks are only needed if -+# your package does certain things. But this isn't really a big deal. -+ -+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -+# AM_INIT_AUTOMAKE([OPTIONS]) -+# ----------------------------------------------- -+# The call with PACKAGE and VERSION arguments is the old style -+# call (pre autoconf-2.50), which is being phased out. PACKAGE -+# and VERSION should now be passed to AC_INIT and removed from -+# the call to AM_INIT_AUTOMAKE. -+# We support both call styles for the transition. After -+# the next Automake release, Autoconf can make the AC_INIT -+# arguments mandatory, and then we can depend on a new Autoconf -+# release and drop the old call support. -+AC_DEFUN([AM_INIT_AUTOMAKE], -+[AC_PREREQ([2.60])dnl -+dnl Autoconf wants to disallow AM_ names. We explicitly allow -+dnl the ones we care about. -+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -+AC_REQUIRE([AC_PROG_INSTALL])dnl -+if test "`cd $srcdir && pwd`" != "`pwd`"; then -+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output -+ # is not polluted with repeated "-I." -+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl -+ # test to see if srcdir already configured -+ if test -f $srcdir/config.status; then -+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -+ fi -+fi -+ -+# test whether we have cygpath -+if test -z "$CYGPATH_W"; then -+ if (cygpath --version) >/dev/null 2>/dev/null; then -+ CYGPATH_W='cygpath -w' -+ else -+ CYGPATH_W=echo -+ fi -+fi -+AC_SUBST([CYGPATH_W]) -+ -+# Define the identity of the package. -+dnl Distinguish between old-style and new-style calls. -+m4_ifval([$2], -+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl -+ AC_SUBST([PACKAGE], [$1])dnl -+ AC_SUBST([VERSION], [$2])], -+[_AM_SET_OPTIONS([$1])dnl -+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, -+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl -+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl -+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl -+ -+_AM_IF_OPTION([no-define],, -+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) -+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl -+ -+# Some tools Automake needs. -+AC_REQUIRE([AM_SANITY_CHECK])dnl -+AC_REQUIRE([AC_ARG_PROGRAM])dnl -+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -+AM_MISSING_PROG(AUTOCONF, autoconf) -+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -+AM_MISSING_PROG(AUTOHEADER, autoheader) -+AM_MISSING_PROG(MAKEINFO, makeinfo) -+AM_PROG_INSTALL_SH -+AM_PROG_INSTALL_STRIP -+AC_REQUIRE([AM_PROG_MKDIR_P])dnl -+# We need awk for the "check" target. The system "awk" is bad on -+# some platforms. -+AC_REQUIRE([AC_PROG_AWK])dnl -+AC_REQUIRE([AC_PROG_MAKE_SET])dnl -+AC_REQUIRE([AM_SET_LEADING_DOT])dnl -+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], -+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], -+ [_AM_PROG_TAR([v7])])]) -+_AM_IF_OPTION([no-dependencies],, -+[AC_PROVIDE_IFELSE([AC_PROG_CC], -+ [_AM_DEPENDENCIES(CC)], -+ [define([AC_PROG_CC], -+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -+AC_PROVIDE_IFELSE([AC_PROG_CXX], -+ [_AM_DEPENDENCIES(CXX)], -+ [define([AC_PROG_CXX], -+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -+AC_PROVIDE_IFELSE([AC_PROG_OBJC], -+ [_AM_DEPENDENCIES(OBJC)], -+ [define([AC_PROG_OBJC], -+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -+]) -+]) -+ -+ -+# When config.status generates a header, we must update the stamp-h file. -+# This file resides in the same directory as the config header -+# that is generated. The stamp files are numbered to have different names. -+ -+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -+# loop where config.status creates the headers, so we can generate -+# our stamp files there. -+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -+[# Compute $1's index in $config_headers. -+_am_arg=$1 -+_am_stamp_count=1 -+for _am_header in $config_headers :; do -+ case $_am_header in -+ $_am_arg | $_am_arg:* ) -+ break ;; -+ * ) -+ _am_stamp_count=`expr $_am_stamp_count + 1` ;; -+ esac -+done -+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -+ -+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# AM_PROG_INSTALL_SH -+# ------------------ -+# Define $install_sh. -+AC_DEFUN([AM_PROG_INSTALL_SH], -+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} -+AC_SUBST(install_sh)]) -+ -+# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - - # serial 2 - -+# Check whether the underlying file-system supports filenames -+# with a leading dot. For instance MS-DOS doesn't. -+AC_DEFUN([AM_SET_LEADING_DOT], -+[rm -rf .tst 2>/dev/null -+mkdir .tst 2>/dev/null -+if test -d .tst; then -+ am__leading_dot=. -+else -+ am__leading_dot=_ -+fi -+rmdir .tst 2>/dev/null -+AC_SUBST([am__leading_dot])]) -+ -+# Check to see how 'make' treats includes. -*- Autoconf -*- -+ -+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# serial 3 -+ - # AM_MAKE_INCLUDE() - # ----------------- - # Check to see how make treats includes. -@@ -789,73 +595,286 @@ - rm -f confinc confmf - ]) - --# AM_CONDITIONAL -*- Autoconf -*- -+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - --# Copyright 1997, 2000, 2001 Free Software Foundation, Inc. -+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+# serial 5 - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# AM_MISSING_PROG(NAME, PROGRAM) -+# ------------------------------ -+AC_DEFUN([AM_MISSING_PROG], -+[AC_REQUIRE([AM_MISSING_HAS_RUN]) -+$1=${$1-"${am_missing_run}$2"} -+AC_SUBST($1)]) - --# serial 5 - --AC_PREREQ(2.52) -+# AM_MISSING_HAS_RUN -+# ------------------ -+# Define MISSING if not defined so far and test if it supports --run. -+# If it does, set am_missing_run to use it, otherwise, to nothing. -+AC_DEFUN([AM_MISSING_HAS_RUN], -+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -+AC_REQUIRE_AUX_FILE([missing])dnl -+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -+# Use eval to expand $SHELL -+if eval "$MISSING --run true"; then -+ am_missing_run="$MISSING --run " -+else -+ am_missing_run= -+ AC_MSG_WARN([`missing' script is too old or missing]) -+fi -+]) - --# AM_CONDITIONAL(NAME, SHELL-CONDITION) --# ------------------------------------- --# Define a conditional. --AC_DEFUN([AM_CONDITIONAL], --[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], -- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl --AC_SUBST([$1_TRUE]) --AC_SUBST([$1_FALSE]) --if $2; then -- $1_TRUE= -- $1_FALSE='#' -+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# AM_PROG_MKDIR_P -+# --------------- -+# Check for `mkdir -p'. -+AC_DEFUN([AM_PROG_MKDIR_P], -+[AC_PREREQ([2.60])dnl -+AC_REQUIRE([AC_PROG_MKDIR_P])dnl -+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -+dnl while keeping a definition of mkdir_p for backward compatibility. -+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -+dnl Makefile.ins that do not define MKDIR_P, so we do our own -+dnl adjustment using top_builddir (which is defined more often than -+dnl MKDIR_P). -+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -+case $mkdir_p in -+ [[\\/$]]* | ?:[[\\/]]*) ;; -+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -+esac -+]) -+ -+# Helper functions for option handling. -*- Autoconf -*- -+ -+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# serial 3 -+ -+# _AM_MANGLE_OPTION(NAME) -+# ----------------------- -+AC_DEFUN([_AM_MANGLE_OPTION], -+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) -+ -+# _AM_SET_OPTION(NAME) -+# ------------------------------ -+# Set option NAME. Presently that only means defining a flag for this option. -+AC_DEFUN([_AM_SET_OPTION], -+[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) -+ -+# _AM_SET_OPTIONS(OPTIONS) -+# ---------------------------------- -+# OPTIONS is a space-separated list of Automake options. -+AC_DEFUN([_AM_SET_OPTIONS], -+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) -+ -+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -+# ------------------------------------------- -+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -+AC_DEFUN([_AM_IF_OPTION], -+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -+ -+# Check to make sure that the build environment is sane. -*- Autoconf -*- -+ -+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# serial 4 -+ -+# AM_SANITY_CHECK -+# --------------- -+AC_DEFUN([AM_SANITY_CHECK], -+[AC_MSG_CHECKING([whether build environment is sane]) -+# Just in case -+sleep 1 -+echo timestamp > conftest.file -+# Do `set' in a subshell so we don't clobber the current shell's -+# arguments. Must try -L first in case configure is actually a -+# symlink; some systems play weird games with the mod time of symlinks -+# (eg FreeBSD returns the mod time of the symlink's containing -+# directory). -+if ( -+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` -+ if test "$[*]" = "X"; then -+ # -L didn't work. -+ set X `ls -t $srcdir/configure conftest.file` -+ fi -+ rm -f conftest.file -+ if test "$[*]" != "X $srcdir/configure conftest.file" \ -+ && test "$[*]" != "X conftest.file $srcdir/configure"; then -+ -+ # If neither matched, then we have a broken ls. This can happen -+ # if, for instance, CONFIG_SHELL is bash and it inherits a -+ # broken ls alias from the environment. This has actually -+ # happened. Such a system could not be considered "sane". -+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -+alias in your environment]) -+ fi -+ -+ test "$[2]" = conftest.file -+ ) -+then -+ # Ok. -+ : - else -- $1_TRUE='#' -- $1_FALSE= -+ AC_MSG_ERROR([newly created file is older than distributed files! -+Check your system clock]) - fi --AC_CONFIG_COMMANDS_PRE( --[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then -- AC_MSG_ERROR([conditional "$1" was never defined. --Usually this means the macro was only invoked conditionally.]) --fi])]) -+AC_MSG_RESULT(yes)]) - --# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- -+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# AM_PROG_INSTALL_STRIP -+# --------------------- -+# One issue with vendor `install' (even GNU) is that you can't -+# specify the program used to strip binaries. This is especially -+# annoying in cross-compiling environments, where the build's strip -+# is unlikely to handle the host's binaries. -+# Fortunately install-sh will honor a STRIPPROG variable, so we -+# always use install-sh in `make install-strip', and initialize -+# STRIPPROG with the value of the STRIP variable (set by the user). -+AC_DEFUN([AM_PROG_INSTALL_STRIP], -+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -+# Installed binaries are usually stripped using `strip' when the user -+# run `make install-strip'. However `strip' might not be the right -+# tool to use in cross-compilation environments, therefore Automake -+# will honor the `STRIP' environment variable to overrule this program. -+dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -+if test "$cross_compiling" != no; then -+ AC_CHECK_TOOL([STRIP], [strip], :) -+fi -+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -+AC_SUBST([INSTALL_STRIP_PROGRAM])]) -+ -+# Copyright (C) 2006 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. -+# _AM_SUBST_NOTMAKE(VARIABLE) -+# --------------------------- -+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -+# This macro is traced by Automake. -+AC_DEFUN([_AM_SUBST_NOTMAKE]) - --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+# Check how to create a tarball. -*- Autoconf -*- - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 2004, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --AC_PREREQ([2.52]) -+# serial 2 - --# serial 6 -+# _AM_PROG_TAR(FORMAT) -+# -------------------- -+# Check how to create a tarball in format FORMAT. -+# FORMAT should be one of `v7', `ustar', or `pax'. -+# -+# Substitute a variable $(am__tar) that is a command -+# writing to stdout a FORMAT-tarball containing the directory -+# $tardir. -+# tardir=directory && $(am__tar) > result.tar -+# -+# Substitute a variable $(am__untar) that extract such -+# a tarball read from stdin. -+# $(am__untar) < result.tar -+AC_DEFUN([_AM_PROG_TAR], -+[# Always define AMTAR for backward compatibility. -+AM_MISSING_PROG([AMTAR], [tar]) -+m4_if([$1], [v7], -+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], -+ [m4_case([$1], [ustar],, [pax],, -+ [m4_fatal([Unknown tar format])]) -+AC_MSG_CHECKING([how to create a $1 tar archive]) -+# Loop over all known methods to create a tar archive until one works. -+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -+_am_tools=${am_cv_prog_tar_$1-$_am_tools} -+# Do not fold the above two line into one, because Tru64 sh and -+# Solaris sh will not grok spaces in the rhs of `-'. -+for _am_tool in $_am_tools -+do -+ case $_am_tool in -+ gnutar) -+ for _am_tar in tar gnutar gtar; -+ do -+ AM_RUN_LOG([$_am_tar --version]) && break -+ done -+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' -+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' -+ am__untar="$_am_tar -xf -" -+ ;; -+ plaintar) -+ # Must skip GNU tar: if it does not support --format= it doesn't create -+ # ustar tarball either. -+ (tar --version) >/dev/null 2>&1 && continue -+ am__tar='tar chf - "$$tardir"' -+ am__tar_='tar chf - "$tardir"' -+ am__untar='tar xf -' -+ ;; -+ pax) -+ am__tar='pax -L -x $1 -w "$$tardir"' -+ am__tar_='pax -L -x $1 -w "$tardir"' -+ am__untar='pax -r' -+ ;; -+ cpio) -+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' -+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' -+ am__untar='cpio -i -H $1 -d' -+ ;; -+ none) -+ am__tar=false -+ am__tar_=false -+ am__untar=false -+ ;; -+ esac - --# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. --AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) -+ # If the value was cached, stop now. We just wanted to have am__tar -+ # and am__untar set. -+ test -n "${am_cv_prog_tar_$1}" && break -+ -+ # tar/untar a dummy directory, and stop if the command works -+ rm -rf conftest.dir -+ mkdir conftest.dir -+ echo GrepMe > conftest.dir/file -+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) -+ rm -rf conftest.dir -+ if test -s conftest.tar; then -+ AM_RUN_LOG([$am__untar <conftest.tar]) -+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break -+ fi -+done -+rm -rf conftest.dir -+ -+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -+AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -+AC_SUBST([am__tar]) -+AC_SUBST([am__untar]) -+]) # _AM_PROG_TAR - -diff -Naur tuneit-0.3/configure tuneit-0.3.patched/configure ---- tuneit-0.3/configure 2005-01-27 14:35:45.000000000 -0500 -+++ tuneit-0.3.patched/configure 2009-12-25 13:40:33.000000000 -0500 -@@ -1,27 +1,84 @@ - #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. --# Generated by GNU Autoconf 2.59 for tuneit 0.3. -+# Generated by GNU Autoconf 2.63 for tuneit 0.3. - # - # Report bugs to <Mario Lang <mlang@delysid.org>>. - # --# Copyright (C) 2003 Free Software Foundation, Inc. -+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - # This configure script is free software; the Free Software Foundation - # gives unlimited permission to copy, distribute and modify it. - ## --------------------- ## - ## M4sh Initialization. ## - ## --------------------- ## - --# Be Bourne compatible -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh - if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: -- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' --elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -- set -o posix -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+as_nl=' -+' -+export as_nl -+# Printing a long string crashes Solaris 7 /usr/bin/printf. -+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then -+ as_echo='printf %s\n' -+ as_echo_n='printf %s' -+else -+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then -+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' -+ as_echo_n='/usr/ucb/echo -n' -+ else -+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' -+ as_echo_n_body='eval -+ arg=$1; -+ case $arg in -+ *"$as_nl"*) -+ expr "X$arg" : "X\\(.*\\)$as_nl"; -+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; -+ esac; -+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" -+ ' -+ export as_echo_n_body -+ as_echo_n='sh -c $as_echo_n_body as_echo' -+ fi -+ export as_echo_body -+ as_echo='sh -c $as_echo_body as_echo' -+fi -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ PATH_SEPARATOR=: -+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { -+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || -+ PATH_SEPARATOR=';' -+ } - fi --DUALCASE=1; export DUALCASE # for MKS sh - - # Support unset when possible. - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -@@ -31,33 +88,60 @@ - fi - - -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ - # Work around bugs in pre-3.0 UWIN ksh. --$as_unset ENV MAIL MAILPATH -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done - PS1='$ ' - PS2='> ' - PS4='+ ' - - # NLS nuisances. --for as_var in \ -- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -- LC_TELEPHONE LC_TIME --do -- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -- eval $as_var=C; export $as_var -- else -- $as_unset $as_var -- fi --done -+LC_ALL=C -+export LC_ALL -+LANGUAGE=C -+export LANGUAGE - - # Required to use basename. --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - --if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename - else - as_basename=false -@@ -65,157 +149,391 @@ - - - # Name of the executable. --as_me=`$as_basename "$0" || -+as_me=`$as_basename -- "$0" || - $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)$' \| \ -- . : '\(.\)' 2>/dev/null || --echo X/"$0" | -- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -- /^X\/\(\/\/\)$/{ s//\1/; q; } -- /^X\/\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+$as_echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - -+# CDPATH. -+$as_unset CDPATH - --# PATH needs CR, and LINENO needs CR and PATH. --# Avoid depending upon Character Ranges. --as_cr_letters='abcdefghijklmnopqrstuvwxyz' --as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' --as_cr_Letters=$as_cr_letters$as_cr_LETTERS --as_cr_digits='0123456789' --as_cr_alnum=$as_cr_Letters$as_cr_digits - --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- echo "#! /bin/sh" >conf$$.sh -- echo "exit 0" >>conf$$.sh -- chmod +x conf$$.sh -- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -- PATH_SEPARATOR=';' -- else -- PATH_SEPARATOR=: -- fi -- rm -f conf$$.sh -+if test "x$CONFIG_SHELL" = x; then -+ if (eval ":") 2>/dev/null; then -+ as_have_required=yes -+else -+ as_have_required=no - fi - -+ if test $as_have_required = yes && (eval ": -+(as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} - -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" || { -- # Find who we are. Look in the path if we contain no path at all -- # relative or not. -- case $0 in -- *[\\/]* ) as_myself=$0 ;; -- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break --done -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi - -- ;; -- esac -- # We did not find ourselves, most probably we were run as `sh COMMAND' -- # in which case we are not to be found in the path. -- if test "x$as_myself" = x; then -- as_myself=$0 -- fi -- if test ! -f "$as_myself"; then -- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 -- { (exit 1); exit 1; }; } -- fi -- case $CONFIG_SHELL in -- '') -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=\$LINENO -+ as_lineno_2=\$LINENO -+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && -+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -+") 2> /dev/null; then -+ : -+else -+ as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for as_base in sh bash ksh sh5; do -- case $as_dir in -+ case $as_dir in - /*) -- if ("$as_dir/$as_base" -c ' -+ for as_base in sh bash ksh sh5; do -+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" -+ done;; -+ esac -+done -+IFS=$as_save_IFS -+ -+ -+ for as_shell in $as_candidate_shells $SHELL; do -+ # Try only shells that exist, to save several forks. -+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && -+ { ("$as_shell") 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+_ASEOF -+}; then -+ CONFIG_SHELL=$as_shell -+ as_have_required=yes -+ if { "$as_shell" 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+(as_func_return () { -+ (exit $1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = "$1" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test $exitcode = 0) || { (exit 1); exit 1; } -+ -+( - as_lineno_1=$LINENO - as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -- CONFIG_SHELL=$as_dir/$as_base -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$0" ${1+"$@"} -- fi;; -- esac -- done --done --;; -- esac -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } -+ -+_ASEOF -+}; then -+ break -+fi -+ -+fi -+ -+ done -+ -+ if test "x$CONFIG_SHELL" != x; then -+ for as_var in BASH_ENV ENV -+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ done -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -+fi -+ -+ -+ if test $as_have_required = no; then -+ echo This script requires a shell more modern than all the -+ echo shells that I found on your system. Please install a -+ echo modern shell, or manually run the script under such a -+ echo shell if you do have one. -+ { (exit 1); exit 1; } -+fi -+ -+ -+fi -+ -+fi -+ -+ -+ -+(eval "as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0") || { -+ echo No shell found that supports shell functions. -+ echo Please tell bug-autoconf@gnu.org about your system, -+ echo including any error possibly output before this message. -+ echo This can help us improve future autoconf versions. -+ echo Configuration will now proceed without shell functions. -+} -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a -- # line-number line before each line; the second 'sed' does the real -- # work. The second script uses 'N' to pair each line-number line -- # with the numbered line, and appends trailing '-' during -- # substitution so that $LINENO is not a special case at line end. -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -- sed '=' <$as_myself | -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | - sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno - N -- s,$,-, -- : loop -- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop -- s,-$,, -- s,^['$as_cr_digits']*\n,, -+ s/-\n.*// - ' >$as_me.lineno && -- chmod +x $as_me.lineno || -- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -+ chmod +x "$as_me.lineno" || -+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensible to this). -- . ./$as_me.lineno -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" - # Exit status is that of the last command. - exit - } - - --case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -- *c*,-n*) ECHO_N= ECHO_C=' --' ECHO_T=' ' ;; -- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; --esac -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi - --if expr a : '\(a\)' >/dev/null 2>&1; then -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - - rm -f conf$$ conf$$.exe conf$$.file --echo >conf$$.file --if ln -s conf$$.file conf$$ 2>/dev/null; then -- # We could just check for DJGPP; but this test a) works b) is more generic -- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -- if test -f conf$$.exe; then -- # Don't use ln at all; we don't have any links -- as_ln_s='cp -p' -- else -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir 2>/dev/null -+fi -+if (echo >conf$$.file) 2>/dev/null; then -+ if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+ elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+ else -+ as_ln_s='cp -p' - fi --elif ln conf$$.file conf$$ 2>/dev/null; then -- as_ln_s=ln - else - as_ln_s='cp -p' - fi --rm -f conf$$ conf$$.exe conf$$.file -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null - - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -@@ -224,7 +542,28 @@ - as_mkdir_p=false - fi - --as_executable_p="test -f" -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x - - # Sed expression to map a string onto a valid CPP name. - as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -@@ -233,39 +572,27 @@ - as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - --# IFS --# We need space, tab and new line, in precisely that order. --as_nl=' --' --IFS=" $as_nl" -- --# CDPATH. --$as_unset CDPATH - -+exec 7<&0 </dev/null 6>&1 - - # Name of the host. - # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, - # so uname gets run too. - ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - --exec 6>&1 -- - # - # Initializations. - # - ac_default_prefix=/usr/local -+ac_clean_files= - ac_config_libobj_dir=. -+LIBOBJS= - cross_compiling=no - subdirs= - MFLAGS= - MAKEFLAGS= - SHELL=${CONFIG_SHELL-/bin/sh} - --# Maximum number of lines to put in a shell here document. --# This variable seems obsolete. It should probably be removed, and --# only ac_max_sed_lines should be used. --: ${ac_max_here_lines=38} -- - # Identity of this package. - PACKAGE_NAME='tuneit' - PACKAGE_TARNAME='tuneit' -@@ -277,46 +604,142 @@ - # Factoring default headers for most tests. - ac_includes_default="\ - #include <stdio.h> --#if HAVE_SYS_TYPES_H -+#ifdef HAVE_SYS_TYPES_H - # include <sys/types.h> - #endif --#if HAVE_SYS_STAT_H -+#ifdef HAVE_SYS_STAT_H - # include <sys/stat.h> - #endif --#if STDC_HEADERS -+#ifdef STDC_HEADERS - # include <stdlib.h> - # include <stddef.h> - #else --# if HAVE_STDLIB_H -+# ifdef HAVE_STDLIB_H - # include <stdlib.h> - # endif - #endif --#if HAVE_STRING_H --# if !STDC_HEADERS && HAVE_MEMORY_H -+#ifdef HAVE_STRING_H -+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H - # include <memory.h> - # endif - # include <string.h> - #endif --#if HAVE_STRINGS_H -+#ifdef HAVE_STRINGS_H - # include <strings.h> - #endif --#if HAVE_INTTYPES_H -+#ifdef HAVE_INTTYPES_H - # include <inttypes.h> --#else --# if HAVE_STDINT_H --# include <stdint.h> --# endif - #endif --#if HAVE_UNISTD_H -+#ifdef HAVE_STDINT_H -+# include <stdint.h> -+#endif -+#ifdef HAVE_UNISTD_H - # include <unistd.h> - #endif" - --ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP LIBOBJS LTLIBOBJS' -+ac_subst_vars='LTLIBOBJS -+LIBOBJS -+EGREP -+GREP -+CPP -+am__fastdepCC_FALSE -+am__fastdepCC_TRUE -+CCDEPMODE -+AMDEPBACKSLASH -+AMDEP_FALSE -+AMDEP_TRUE -+am__quote -+am__include -+DEPDIR -+OBJEXT -+EXEEXT -+ac_ct_CC -+CPPFLAGS -+LDFLAGS -+CFLAGS -+CC -+am__untar -+am__tar -+AMTAR -+am__leading_dot -+SET_MAKE -+AWK -+mkdir_p -+MKDIR_P -+INSTALL_STRIP_PROGRAM -+STRIP -+install_sh -+MAKEINFO -+AUTOHEADER -+AUTOMAKE -+AUTOCONF -+ACLOCAL -+VERSION -+PACKAGE -+CYGPATH_W -+am__isrc -+INSTALL_DATA -+INSTALL_SCRIPT -+INSTALL_PROGRAM -+target_alias -+host_alias -+build_alias -+LIBS -+ECHO_T -+ECHO_N -+ECHO_C -+DEFS -+mandir -+localedir -+libdir -+psdir -+pdfdir -+dvidir -+htmldir -+infodir -+docdir -+oldincludedir -+includedir -+localstatedir -+sharedstatedir -+sysconfdir -+datadir -+datarootdir -+libexecdir -+sbindir -+bindir -+program_transform_name -+prefix -+exec_prefix -+PACKAGE_BUGREPORT -+PACKAGE_STRING -+PACKAGE_VERSION -+PACKAGE_TARNAME -+PACKAGE_NAME -+PATH_SEPARATOR -+SHELL' - ac_subst_files='' -+ac_user_opts=' -+enable_option_checking -+enable_dependency_tracking -+enable_jack -+' -+ ac_precious_vars='build_alias -+host_alias -+target_alias -+CC -+CFLAGS -+LDFLAGS -+LIBS -+CPPFLAGS -+CPP' -+ - - # Initialize some variables set by options. - ac_init_help= - ac_init_version=false -+ac_unrecognized_opts= -+ac_unrecognized_sep= - # The variables have the same names as the options, with - # dashes changed to underlines. - cache_file=/dev/null -@@ -339,34 +762,48 @@ - # and all the variables that are supposed to be based on exec_prefix - # by default will actually change. - # Use braces instead of parens because sh, perl, etc. also accept them. -+# (The list follows the same order as the GNU Coding Standards.) - bindir='${exec_prefix}/bin' - sbindir='${exec_prefix}/sbin' - libexecdir='${exec_prefix}/libexec' --datadir='${prefix}/share' -+datarootdir='${prefix}/share' -+datadir='${datarootdir}' - sysconfdir='${prefix}/etc' - sharedstatedir='${prefix}/com' - localstatedir='${prefix}/var' --libdir='${exec_prefix}/lib' - includedir='${prefix}/include' - oldincludedir='/usr/include' --infodir='${prefix}/info' --mandir='${prefix}/man' -+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -+infodir='${datarootdir}/info' -+htmldir='${docdir}' -+dvidir='${docdir}' -+pdfdir='${docdir}' -+psdir='${docdir}' -+libdir='${exec_prefix}/lib' -+localedir='${datarootdir}/locale' -+mandir='${datarootdir}/man' - - ac_prev= -+ac_dashdash= - for ac_option - do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then -- eval "$ac_prev=\$ac_option" -+ eval $ac_prev=\$ac_option - ac_prev= - continue - fi - -- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` -+ case $ac_option in -+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -+ *) ac_optarg=yes ;; -+ esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - -- case $ac_option in -+ case $ac_dashdash$ac_option in -+ --) -+ ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; -@@ -388,33 +825,61 @@ - --config-cache | -C) - cache_file=config.cache ;; - -- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) -+ -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; -- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ -- | --da=*) -+ -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - -+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ -+ | --dataroo | --dataro | --datar) -+ ac_prev=datarootdir ;; -+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ -+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) -+ datarootdir=$ac_optarg ;; -+ - -disable-* | --disable-*) -- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` -+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- eval "enable_$ac_feature=no" ;; -+ ac_useropt_orig=$ac_useropt -+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -+ case $ac_user_opts in -+ *" -+"enable_$ac_useropt" -+"*) ;; -+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" -+ ac_unrecognized_sep=', ';; -+ esac -+ eval enable_$ac_useropt=no ;; -+ -+ -docdir | --docdir | --docdi | --doc | --do) -+ ac_prev=docdir ;; -+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) -+ docdir=$ac_optarg ;; -+ -+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) -+ ac_prev=dvidir ;; -+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) -+ dvidir=$ac_optarg ;; - - -enable-* | --enable-*) -- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` -+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -- *) ac_optarg=yes ;; -+ ac_useropt_orig=$ac_useropt -+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -+ case $ac_user_opts in -+ *" -+"enable_$ac_useropt" -+"*) ;; -+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" -+ ac_unrecognized_sep=', ';; - esac -- eval "enable_$ac_feature='$ac_optarg'" ;; -+ eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -@@ -441,6 +906,12 @@ - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - -+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) -+ ac_prev=htmldir ;; -+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ -+ | --ht=*) -+ htmldir=$ac_optarg ;; -+ - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; -@@ -465,13 +936,16 @@ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - -+ -localedir | --localedir | --localedi | --localed | --locale) -+ ac_prev=localedir ;; -+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) -+ localedir=$ac_optarg ;; -+ - -localstatedir | --localstatedir | --localstatedi | --localstated \ -- | --localstate | --localstat | --localsta | --localst \ -- | --locals | --local | --loca | --loc | --lo) -+ | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ -- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ -- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) -+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) -@@ -536,6 +1010,16 @@ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - -+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) -+ ac_prev=pdfdir ;; -+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) -+ pdfdir=$ac_optarg ;; -+ -+ -psdir | --psdir | --psdi | --psd | --ps) -+ ac_prev=psdir ;; -+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) -+ psdir=$ac_optarg ;; -+ - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; -@@ -586,26 +1070,38 @@ - ac_init_version=: ;; - - -with-* | --with-*) -- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` -+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } -- ac_package=`echo $ac_package| sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -- *) ac_optarg=yes ;; -+ ac_useropt_orig=$ac_useropt -+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -+ case $ac_user_opts in -+ *" -+"with_$ac_useropt" -+"*) ;; -+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" -+ ac_unrecognized_sep=', ';; - esac -- eval "with_$ac_package='$ac_optarg'" ;; -+ eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) -- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` -+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } -- ac_package=`echo $ac_package | sed 's/-/_/g'` -- eval "with_$ac_package=no" ;; -+ ac_useropt_orig=$ac_useropt -+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -+ case $ac_user_opts in -+ *" -+"with_$ac_useropt" -+"*) ;; -+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" -+ ac_unrecognized_sep=', ';; -+ esac -+ eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. -@@ -625,7 +1121,7 @@ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - -- -*) { echo "$as_me: error: unrecognized option: $ac_option -+ -*) { $as_echo "$as_me: error: unrecognized option: $ac_option - Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; -@@ -634,17 +1130,16 @@ - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 -+ { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } -- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` -- eval "$ac_envvar='$ac_optarg'" -+ eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. -- echo "$as_me: WARNING: you should use --build, --host, --target" >&2 -+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && -- echo "$as_me: WARNING: invalid host type: $ac_option" >&2 -+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - -@@ -653,31 +1148,39 @@ - - if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` -- { echo "$as_me: error: missing argument to $ac_option" >&2 -+ { $as_echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } - fi - --# Be sure to have absolute paths. --for ac_var in exec_prefix prefix --do -- eval ac_val=$`echo $ac_var` -- case $ac_val in -- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -+if test -n "$ac_unrecognized_opts"; then -+ case $enable_option_checking in -+ no) ;; -+ fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 -+ { (exit 1); exit 1; }; } ;; -+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac --done -+fi - --# Be sure to have absolute paths. --for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ -- localstatedir libdir includedir oldincludedir infodir mandir -+# Check all directory arguments for consistency. -+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ -+ datadir sysconfdir sharedstatedir localstatedir includedir \ -+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ -+ libdir localedir mandir - do -- eval ac_val=$`echo $ac_var` -+ eval ac_val=\$$ac_var -+ # Remove trailing slashes. - case $ac_val in -- [\\/$]* | ?:[\\/]* ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -+ */ ) -+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` -+ eval $ac_var=\$ac_val;; -+ esac -+ # Be sure to have absolute directory names. -+ case $ac_val in -+ [\\/$]* | ?:[\\/]* ) continue;; -+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac -+ { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -+ { (exit 1); exit 1; }; } - done - - # There might be people who depend on the old broken behavior: `$host' -@@ -691,7 +1194,7 @@ - if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe -- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. -+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes -@@ -704,74 +1207,76 @@ - test "$silent" = yes && exec 6>/dev/null - - -+ac_pwd=`pwd` && test -n "$ac_pwd" && -+ac_ls_di=`ls -di .` && -+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || -+ { $as_echo "$as_me: error: working directory cannot be determined" >&2 -+ { (exit 1); exit 1; }; } -+test "X$ac_ls_di" = "X$ac_pwd_ls_di" || -+ { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 -+ { (exit 1); exit 1; }; } -+ -+ - # Find the source files, if location was not specified. - if test -z "$srcdir"; then - ac_srcdir_defaulted=yes -- # Try the directory containing this script, then its parent. -- ac_confdir=`(dirname "$0") 2>/dev/null || --$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$0" : 'X\(//\)[^/]' \| \ -- X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$0" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ # Try the directory containing this script, then the parent directory. -+ ac_confdir=`$as_dirname -- "$as_myself" || -+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$as_myself" : 'X\(//\)[^/]' \| \ -+ X"$as_myself" : 'X\(//\)$' \| \ -+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -+$as_echo X"$as_myself" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - srcdir=$ac_confdir -- if test ! -r $srcdir/$ac_unique_file; then -+ if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi - else - ac_srcdir_defaulted=no - fi --if test ! -r $srcdir/$ac_unique_file; then -- if test "$ac_srcdir_defaulted" = yes; then -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 -- { (exit 1); exit 1; }; } -- else -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -+if test ! -r "$srcdir/$ac_unique_file"; then -+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." -+ { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } -- fi - fi --(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || -- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 -+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -+ac_abs_confdir=`( -+ cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } --srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` --ac_env_build_alias_set=${build_alias+set} --ac_env_build_alias_value=$build_alias --ac_cv_env_build_alias_set=${build_alias+set} --ac_cv_env_build_alias_value=$build_alias --ac_env_host_alias_set=${host_alias+set} --ac_env_host_alias_value=$host_alias --ac_cv_env_host_alias_set=${host_alias+set} --ac_cv_env_host_alias_value=$host_alias --ac_env_target_alias_set=${target_alias+set} --ac_env_target_alias_value=$target_alias --ac_cv_env_target_alias_set=${target_alias+set} --ac_cv_env_target_alias_value=$target_alias --ac_env_CC_set=${CC+set} --ac_env_CC_value=$CC --ac_cv_env_CC_set=${CC+set} --ac_cv_env_CC_value=$CC --ac_env_CFLAGS_set=${CFLAGS+set} --ac_env_CFLAGS_value=$CFLAGS --ac_cv_env_CFLAGS_set=${CFLAGS+set} --ac_cv_env_CFLAGS_value=$CFLAGS --ac_env_LDFLAGS_set=${LDFLAGS+set} --ac_env_LDFLAGS_value=$LDFLAGS --ac_cv_env_LDFLAGS_set=${LDFLAGS+set} --ac_cv_env_LDFLAGS_value=$LDFLAGS --ac_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_env_CPPFLAGS_value=$CPPFLAGS --ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_cv_env_CPPFLAGS_value=$CPPFLAGS --ac_env_CPP_set=${CPP+set} --ac_env_CPP_value=$CPP --ac_cv_env_CPP_set=${CPP+set} --ac_cv_env_CPP_value=$CPP -+ pwd)` -+# When building in place, set srcdir=. -+if test "$ac_abs_confdir" = "$ac_pwd"; then -+ srcdir=. -+fi -+# Remove unnecessary trailing slashes from srcdir. -+# Double slashes in file names in object file debugging info -+# mess up M-x gdb in Emacs. -+case $srcdir in -+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -+esac -+for ac_var in $ac_precious_vars; do -+ eval ac_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_env_${ac_var}_value=\$${ac_var} -+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_cv_env_${ac_var}_value=\$${ac_var} -+done - - # - # Report the --help message. -@@ -800,14 +1305,11 @@ - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - --_ACEOF -- -- cat <<_ACEOF - Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX -- [$ac_default_prefix] -+ [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -- [PREFIX] -+ [PREFIX] - - By default, \`make install' will install all the files in - \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -@@ -817,18 +1319,25 @@ - For better control, use the options below. - - Fine tuning of the installation directories: -- --bindir=DIR user executables [EPREFIX/bin] -- --sbindir=DIR system admin executables [EPREFIX/sbin] -- --libexecdir=DIR program executables [EPREFIX/libexec] -- --datadir=DIR read-only architecture-independent data [PREFIX/share] -- --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -- --localstatedir=DIR modifiable single-machine data [PREFIX/var] -- --libdir=DIR object code libraries [EPREFIX/lib] -- --includedir=DIR C header files [PREFIX/include] -- --oldincludedir=DIR C header files for non-gcc [/usr/include] -- --infodir=DIR info documentation [PREFIX/info] -- --mandir=DIR man documentation [PREFIX/man] -+ --bindir=DIR user executables [EPREFIX/bin] -+ --sbindir=DIR system admin executables [EPREFIX/sbin] -+ --libexecdir=DIR program executables [EPREFIX/libexec] -+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -+ --localstatedir=DIR modifiable single-machine data [PREFIX/var] -+ --libdir=DIR object code libraries [EPREFIX/lib] -+ --includedir=DIR C header files [PREFIX/include] -+ --oldincludedir=DIR C header files for non-gcc [/usr/include] -+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] -+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] -+ --infodir=DIR info documentation [DATAROOTDIR/info] -+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] -+ --mandir=DIR man documentation [DATAROOTDIR/man] -+ --docdir=DIR documentation root [DATAROOTDIR/doc/tuneit] -+ --htmldir=DIR html documentation [DOCDIR] -+ --dvidir=DIR dvi documentation [DOCDIR] -+ --pdfdir=DIR pdf documentation [DOCDIR] -+ --psdir=DIR ps documentation [DOCDIR] - _ACEOF - - cat <<\_ACEOF -@@ -847,18 +1356,21 @@ - cat <<\_ACEOF - - Optional Features: -+ --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] -- --disable-dependency-tracking Speeds up one-time builds -- --enable-dependency-tracking Do not reject slow dependency extractors -+ --disable-dependency-tracking speeds up one-time build -+ --enable-dependency-tracking do not reject slow dependency extractors -+ --enable-jack turn on JACK support (default=yes) - - Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> -- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have -- headers in a nonstandard directory <include dir> -+ LIBS libraries to pass to the linker, e.g. -l<library> -+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if -+ you have headers in a nonstandard directory <include dir> - CPP C preprocessor - - Use these variables to override the choices made by `configure' or to help -@@ -866,120 +1378,88 @@ - - Report bugs to <Mario Lang <mlang@delysid.org>>. - _ACEOF -+ac_status=$? - fi - - if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. -- ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -- test -d $ac_dir || continue -+ test -d "$ac_dir" || -+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || -+ continue - ac_builddir=. - --if test "$ac_dir" != .; then -- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - - case $srcdir in -- .) # No --srcdir option. We are building in place. -+ .) # We are building in place. - ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -- --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; - esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - -- cd $ac_dir -- # Check for guested configure; otherwise get Cygnus style configure. -- if test -f $ac_srcdir/configure.gnu; then -- echo -- $SHELL $ac_srcdir/configure.gnu --help=recursive -- elif test -f $ac_srcdir/configure; then -- echo -- $SHELL $ac_srcdir/configure --help=recursive -- elif test -f $ac_srcdir/configure.ac || -- test -f $ac_srcdir/configure.in; then -- echo -- $ac_configure --help -+ cd "$ac_dir" || { ac_status=$?; continue; } -+ # Check for guested configure. -+ if test -f "$ac_srcdir/configure.gnu"; then -+ echo && -+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive -+ elif test -f "$ac_srcdir/configure"; then -+ echo && -+ $SHELL "$ac_srcdir/configure" --help=recursive - else -- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -- fi -- cd "$ac_popdir" -+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -+ fi || ac_status=$? -+ cd "$ac_pwd" || { ac_status=$?; break; } - done - fi - --test -n "$ac_init_help" && exit 0 -+test -n "$ac_init_help" && exit $ac_status - if $ac_init_version; then - cat <<\_ACEOF - tuneit configure 0.3 --generated by GNU Autoconf 2.59 -+generated by GNU Autoconf 2.63 - --Copyright (C) 2003 Free Software Foundation, Inc. -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - This configure script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it. - _ACEOF -- exit 0 -+ exit - fi --exec 5>config.log --cat >&5 <<_ACEOF -+cat >config.log <<_ACEOF - This file contains any messages produced by compilers while - running configure, to aid debugging if configure makes a mistake. - - It was created by tuneit $as_me 0.3, which was --generated by GNU Autoconf 2.59. Invocation command line was -+generated by GNU Autoconf 2.63. Invocation command line was - - $ $0 $@ - - _ACEOF -+exec 5>>config.log - { - cat <<_ASUNAME - ## --------- ## -@@ -998,7 +1478,7 @@ - /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` - /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` - /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` --hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` - /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` - /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` - /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -@@ -1010,8 +1490,9 @@ - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- echo "PATH: $as_dir" -+ $as_echo "PATH: $as_dir" - done -+IFS=$as_save_IFS - - } >&5 - -@@ -1033,7 +1514,6 @@ - ac_configure_args= - ac_configure_args0= - ac_configure_args1= --ac_sep= - ac_must_keep_next=false - for ac_pass in 1 2 - do -@@ -1044,8 +1524,8 @@ - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *\'*) -+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; -@@ -1066,9 +1546,7 @@ - -* ) ac_must_keep_next=true ;; - esac - fi -- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" -- # Get rid of the leading space. -- ac_sep=" " -+ ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - esac - done -@@ -1079,8 +1557,8 @@ - # When interrupted or exit'd, cleanup temporary files, and complete - # config.log. We remove comments because anyway the quotes in there - # would cause problems or look ugly. --# WARNING: Be sure not to use single quotes in there, as some shells, --# such as our DU 5.0 friend, will then `close' the trap. -+# WARNING: Use '\'' to represent an apostrophe within the trap. -+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. - trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { -@@ -1093,20 +1571,35 @@ - _ASBOX - echo - # The following way of writing the cache mishandles newlines in values, --{ -+( -+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 -+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done - (set) 2>&1 | -- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) - sed -n \ -- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; -- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" -- ;; -+ "s/'\''/'\''\\\\'\'''\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" -+ ;; #( - *) -- sed -n \ -- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; -- esac; --} -+ esac | -+ sort -+) - echo - - cat <<\_ASBOX -@@ -1117,22 +1610,28 @@ - echo - for ac_var in $ac_subst_vars - do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX --## ------------- ## --## Output files. ## --## ------------- ## -+## ------------------- ## -+## File substitutions. ## -+## ------------------- ## - _ASBOX - echo - for ac_var in $ac_subst_files - do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi -@@ -1144,26 +1643,24 @@ - ## ----------- ## - _ASBOX - echo -- sed "/^$/d" confdefs.h | sort -+ cat confdefs.h - echo - fi - test "$ac_signal" != 0 && -- echo "$as_me: caught signal $ac_signal" -- echo "$as_me: exit $exit_status" -+ $as_echo "$as_me: caught signal $ac_signal" -+ $as_echo "$as_me: exit $exit_status" - } >&5 -- rm -f core *.core && -- rm -rf conftest* confdefs* conf$$* $ac_clean_files && -+ rm -f core *.core core.conftest.* && -+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -- ' 0 -+' 0 - for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal - done - ac_signal=0 - - # confdefs.h avoids OS command line length limits that DEFS can exceed. --rm -rf conftest* confdefs.h --# AIX cpp loses on an empty file, so make sure it contains at least a newline. --echo >confdefs.h -+rm -f -r conftest* confdefs.h - - # Predefined preprocessor variables. - -@@ -1193,18 +1690,24 @@ - - - # Let the site file select an alternate cache file if it wants to. --# Prefer explicitly selected file to automatically selected ones. --if test -z "$CONFIG_SITE"; then -- if test "x$prefix" != xNONE; then -- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" -- else -- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" -- fi -+# Prefer an explicitly selected file to automatically selected ones. -+ac_site_file1=NONE -+ac_site_file2=NONE -+if test -n "$CONFIG_SITE"; then -+ ac_site_file1=$CONFIG_SITE -+elif test "x$prefix" != xNONE; then -+ ac_site_file1=$prefix/share/config.site -+ ac_site_file2=$prefix/etc/config.site -+else -+ ac_site_file1=$ac_default_prefix/share/config.site -+ ac_site_file2=$ac_default_prefix/etc/config.site - fi --for ac_site_file in $CONFIG_SITE; do -+for ac_site_file in "$ac_site_file1" "$ac_site_file2" -+do -+ test "x$ac_site_file" = xNONE && continue - if test -r "$ac_site_file"; then -- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 --echo "$as_me: loading site script $ac_site_file" >&6;} -+ { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -+$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -@@ -1214,54 +1717,61 @@ - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then -- { echo "$as_me:$LINENO: loading cache $cache_file" >&5 --echo "$as_me: loading cache $cache_file" >&6;} -+ { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 -+$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in -- [\\/]* | ?:[\\/]* ) . $cache_file;; -- *) . ./$cache_file;; -+ [\\/]* | ?:[\\/]* ) . "$cache_file";; -+ *) . "./$cache_file";; - esac - fi - else -- { echo "$as_me:$LINENO: creating cache $cache_file" >&5 --echo "$as_me: creating cache $cache_file" >&6;} -+ { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 -+$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file - fi - - # Check that the precious variables saved in the cache have kept the same - # value. - ac_cache_corrupted=false --for ac_var in `(set) 2>&1 | -- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do -+for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set -- eval ac_old_val="\$ac_cv_env_${ac_var}_value" -- eval ac_new_val="\$ac_env_${ac_var}_value" -+ eval ac_old_val=\$ac_cv_env_${ac_var}_value -+ eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) -- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 --echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} -+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) -- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 --echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} -+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then -- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 --echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 --echo "$as_me: former value: $ac_old_val" >&2;} -- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 --echo "$as_me: current value: $ac_new_val" >&2;} -- ac_cache_corrupted=: -+ # differences in whitespace do not lead to failure. -+ ac_old_val_w=`echo x $ac_old_val` -+ ac_new_val_w=`echo x $ac_new_val` -+ if test "$ac_old_val_w" != "$ac_new_val_w"; then -+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -+ ac_cache_corrupted=: -+ else -+ { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} -+ eval $ac_var=\$ac_old_val -+ fi -+ { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 -+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} -+ { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 -+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in -@@ -1271,18 +1781,15 @@ - fi - done - if $ac_cache_corrupted; then -- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 --echo "$as_me: error: changes in the environment can compromise the build" >&2;} -- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 --echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} -+ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+ { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} -+ { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } - fi - --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -@@ -1307,34 +1814,45 @@ - - - -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -+am__api_version='1.10' - --am__api_version="1.7" - ac_aux_dir= --for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do -- if test -f $ac_dir/install-sh; then -+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do -+ if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break -- elif test -f $ac_dir/install.sh; then -+ elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break -- elif test -f $ac_dir/shtool; then -+ elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi - done - if test -z "$ac_aux_dir"; then -- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 --echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} -+ { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 -+$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} - { (exit 1); exit 1; }; } - fi --ac_config_guess="$SHELL $ac_aux_dir/config.guess" --ac_config_sub="$SHELL $ac_aux_dir/config.sub" --ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. -+ -+# These three variables are undocumented and unsupported, -+# and are intended to be withdrawn in a future Autoconf release. -+# They can cause serious problems if a builder's source tree is in a directory -+# whose full name contains unusual characters. -+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -+ - - # Find a good install program. We prefer a C program (faster), - # so one script is as good as another. But avoid the broken or -@@ -1349,11 +1867,12 @@ - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" - # OS/2's system install, which has a completely different semantic - # ./install, which can be erroneously created by make from ./install.sh. --echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 --echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -+# Reject install programs that cannot install multiple files. -+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+$as_echo_n "checking for a BSD-compatible install... " >&6; } - if test -z "$INSTALL"; then - if test "${ac_cv_path_install+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH -@@ -1372,7 +1891,7 @@ - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. -@@ -1382,30 +1901,43 @@ - # program-specific install script used by HP pwplus--don't use. - : - else -- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -- break 3 -+ rm -rf conftest.one conftest.two conftest.dir -+ echo one > conftest.one -+ echo two > conftest.two -+ mkdir conftest.dir -+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && -+ test -s conftest.one && test -s conftest.two && -+ test -s conftest.dir/conftest.one && -+ test -s conftest.dir/conftest.two -+ then -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 -+ fi - fi - fi - done - done - ;; - esac -+ - done -+IFS=$as_save_IFS - -+rm -rf conftest.one conftest.two conftest.dir - - fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else -- # As a last resort, use the slow shell script. We don't cache a -- # path for INSTALL within a source directory, because that will -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is -- # removed, or if the path is relative. -+ # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi - fi --echo "$as_me:$LINENO: result: $INSTALL" >&5 --echo "${ECHO_T}$INSTALL" >&6 -+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 -+$as_echo "$INSTALL" >&6; } - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. -@@ -1415,8 +1947,8 @@ - - test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - --echo "$as_me:$LINENO: checking whether build environment is sane" >&5 --echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -+$as_echo_n "checking whether build environment is sane... " >&6; } - # Just in case - sleep 1 - echo timestamp > conftest.file -@@ -1439,9 +1971,9 @@ - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". -- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -+ { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken - alias in your environment" >&5 --echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -+$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken - alias in your environment" >&2;} - { (exit 1); exit 1; }; } - fi -@@ -1452,27 +1984,23 @@ - # Ok. - : - else -- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -+ { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! - Check your system clock" >&5 --echo "$as_me: error: newly created file is older than distributed files! -+$as_echo "$as_me: error: newly created file is older than distributed files! - Check your system clock" >&2;} - { (exit 1); exit 1; }; } - fi --echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+{ $as_echo "$as_me:$LINENO: result: yes" >&5 -+$as_echo "yes" >&6; } - test "$program_prefix" != NONE && -- program_transform_name="s,^,$program_prefix,;$program_transform_name" -+ program_transform_name="s&^&$program_prefix&;$program_transform_name" - # Use a double $ so make ignores it. - test "$program_suffix" != NONE && -- program_transform_name="s,\$,$program_suffix,;$program_transform_name" --# Double any \ or $. echo might interpret backslashes. -+ program_transform_name="s&\$&$program_suffix&;$program_transform_name" -+# Double any \ or $. - # By default was `s,x,x', remove it if useless. --cat <<\_ACEOF >conftest.sed --s/[\\$]/&&/g;s/;s,x,x,$// --_ACEOF --program_transform_name=`echo $program_transform_name | sed -f conftest.sed` --rm conftest.sed -- -+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - - # expand $ac_aux_dir to an absolute path - am_aux_dir=`cd $ac_aux_dir && pwd` -@@ -1483,18 +2011,66 @@ - am_missing_run="$MISSING --run " - else - am_missing_run= -- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 --echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -+fi -+ -+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 -+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -+if test -z "$MKDIR_P"; then -+ if test "${ac_cv_path_mkdir+set}" = set; then -+ $as_echo_n "(cached) " >&6 -+else -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in mkdir gmkdir; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue -+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( -+ 'mkdir (GNU coreutils) '* | \ -+ 'mkdir (coreutils) '* | \ -+ 'mkdir (fileutils) '4.1*) -+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext -+ break 3;; -+ esac -+ done -+ done -+done -+IFS=$as_save_IFS -+ -+fi -+ -+ if test "${ac_cv_path_mkdir+set}" = set; then -+ MKDIR_P="$ac_cv_path_mkdir -p" -+ else -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for MKDIR_P within a source directory, because that will -+ # break other packages using the cache if that directory is -+ # removed, or if the value is a relative name. -+ test -d ./--version && rmdir ./--version -+ MKDIR_P="$ac_install_sh -d" -+ fi - fi -+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 -+$as_echo "$MKDIR_P" >&6; } -+ -+mkdir_p="$MKDIR_P" -+case $mkdir_p in -+ [\\/$]* | ?:[\\/]*) ;; -+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -+esac - - for ac_prog in gawk mawk nawk awk - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } - if test "${ac_cv_prog_AWK+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -@@ -1505,54 +2081,58 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AWK=$ac_cv_prog_AWK - if test -n "$AWK"; then -- echo "$as_me:$LINENO: result: $AWK" >&5 --echo "${ECHO_T}$AWK" >&6 -+ { $as_echo "$as_me:$LINENO: result: $AWK" >&5 -+$as_echo "$AWK" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - test -n "$AWK" && break - done - --echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 --echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 --set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` --if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -+set x ${MAKE-make} -+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then -+ $as_echo_n "(cached) " >&6 - else - cat >conftest.make <<\_ACEOF -+SHELL = /bin/sh - all: -- @echo 'ac_maketemp="$(MAKE)"' -+ @echo '@@@%%%=$(MAKE)=@@@%%%' - _ACEOF - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. --eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` --if test -n "$ac_maketemp"; then -- eval ac_cv_prog_make_${ac_make}_set=yes --else -- eval ac_cv_prog_make_${ac_make}_set=no --fi -+case `${MAKE-make} -f conftest.make 2>/dev/null` in -+ *@@@%%%=?*=@@@%%%*) -+ eval ac_cv_prog_make_${ac_make}_set=yes;; -+ *) -+ eval ac_cv_prog_make_${ac_make}_set=no;; -+esac - rm -f conftest.make - fi --if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then -+ { $as_echo "$as_me:$LINENO: result: yes" >&5 -+$as_echo "yes" >&6; } - SET_MAKE= - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" - fi - -@@ -1565,12 +2145,16 @@ - fi - rmdir .tst 2>/dev/null - -- # test to see if srcdir already configured --if test "`cd $srcdir && pwd`" != "`pwd`" && -- test -f $srcdir/config.status; then -- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 --echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} -+if test "`cd $srcdir && pwd`" != "`pwd`"; then -+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output -+ # is not polluted with repeated "-I." -+ am__isrc=' -I$(srcdir)' -+ # test to see if srcdir already configured -+ if test -f $srcdir/config.status; then -+ { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } -+ fi - fi - - # test whether we have cygpath -@@ -1613,10 +2197,7 @@ - - MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -- --AMTAR=${AMTAR-"${am_missing_run}tar"} -- --install_sh=${install_sh-"$am_aux_dir/install-sh"} -+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} - - # Installed binaries are usually stripped using `strip' when the user - # run `make install-strip'. However `strip' might not be the right -@@ -1626,10 +2207,10 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. - set dummy ${ac_tool_prefix}strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } - if test "${ac_cv_prog_STRIP+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -@@ -1640,34 +2221,36 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - STRIP=$ac_cv_prog_STRIP - if test -n "$STRIP"; then -- echo "$as_me:$LINENO: result: $STRIP" >&5 --echo "${ECHO_T}$STRIP" >&6 -+ { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 -+$as_echo "$STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. - set dummy strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } - if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -@@ -1678,41 +2261,58 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" - fi - fi - ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP - if test -n "$ac_ct_STRIP"; then -- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 --echo "${ECHO_T}$ac_ct_STRIP" >&6 -+ { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -+$as_echo "$ac_ct_STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - fi - -- STRIP=$ac_ct_STRIP -+ if test "x$ac_ct_STRIP" = x; then -+ STRIP=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ STRIP=$ac_ct_STRIP -+ fi - else - STRIP="$ac_cv_prog_STRIP" - fi - - fi --INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - - # We need awk for the "check" target. The system "awk" is bad on - # some platforms. -+# Always define AMTAR for backward compatibility. -+ -+AMTAR=${AMTAR-"${am_missing_run}tar"} -+ -+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - -- ac_config_headers="$ac_config_headers config.h" -+ -+ -+ac_config_headers="$ac_config_headers config.h" - - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' -@@ -1722,10 +2322,10 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. - set dummy ${ac_tool_prefix}gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } - if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -1736,34 +2336,36 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { $as_echo "$as_me:$LINENO: result: $CC" >&5 -+$as_echo "$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. - set dummy gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } - if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -@@ -1774,38 +2376,49 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_CC=$ac_cv_prog_ac_ct_CC - if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+$as_echo "$ac_ct_CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - fi - -- CC=$ac_ct_CC -+ if test "x$ac_ct_CC" = x; then -+ CC="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ CC=$ac_ct_CC -+ fi - else - CC="$ac_cv_prog_CC" - fi - - if test -z "$CC"; then -- if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. - set dummy ${ac_tool_prefix}cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } - if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -1816,76 +2429,36 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- --fi --if test -z "$ac_cv_prog_CC"; then -- ac_ct_CC=$CC -- # Extract the first word of "cc", so it can be a program name with args. --set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$ac_ct_CC"; then -- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_CC="cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- --fi --fi --ac_ct_CC=$ac_cv_prog_ac_ct_CC --if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { $as_echo "$as_me:$LINENO: result: $CC" >&5 -+$as_echo "$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - fi - -- CC=$ac_ct_CC --else -- CC="$ac_cv_prog_CC" --fi - -+ fi - fi - if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. - set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } - if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -1897,17 +2470,18 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. -@@ -1925,24 +2499,25 @@ - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { $as_echo "$as_me:$LINENO: result: $CC" >&5 -+$as_echo "$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - fi - if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then -- for ac_prog in cl -+ for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } - if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -1953,38 +2528,40 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { $as_echo "$as_me:$LINENO: result: $CC" >&5 -+$as_echo "$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - test -n "$CC" && break - done - fi - if test -z "$CC"; then - ac_ct_CC=$CC -- for ac_prog in cl -+ for ac_prog in cl.exe - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } - if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -@@ -1995,58 +2572,90 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_CC=$ac_cv_prog_ac_ct_CC - if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+$as_echo "$ac_ct_CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - test -n "$ac_ct_CC" && break - done - -- CC=$ac_ct_CC -+ if test "x$ac_ct_CC" = x; then -+ CC="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ CC=$ac_ct_CC -+ fi - fi - - fi - - --test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -+test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH - See \`config.log' for more details." >&5 --echo "$as_me: error: no acceptable C compiler found in \$PATH -+$as_echo "$as_me: error: no acceptable C compiler found in \$PATH - See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+ { (exit 1); exit 1; }; }; } - - # Provide some information about the compiler. --echo "$as_me:$LINENO:" \ -- "checking for C compiler version" >&5 --ac_compiler=`set X $ac_compile; echo $2` --{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 -- (eval $ac_compiler --version </dev/null >&5) 2>&5 -+$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 -+set X $ac_compile -+ac_compiler=$2 -+{ (ac_try="$ac_compiler --version >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 -- (eval $ac_compiler -v </dev/null >&5) 2>&5 -+{ (ac_try="$ac_compiler -v >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 -- (eval $ac_compiler -V </dev/null >&5) 2>&5 -+{ (ac_try="$ac_compiler -V >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - - cat >conftest.$ac_ext <<_ACEOF -@@ -2065,111 +2674,150 @@ - } - _ACEOF - ac_clean_files_save=$ac_clean_files --ac_clean_files="$ac_clean_files a.out a.exe b.out" -+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" - # Try to create an executable without -o first, disregard a.out. - # It will help us diagnose broken compilers, and finding out an intuition - # of exeext. --echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 --echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 --ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` --if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 -- (eval $ac_link_default) 2>&5 -+{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -+$as_echo_n "checking for C compiler default output file name... " >&6; } -+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -+ -+# The possible output files: -+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" -+ -+ac_rmfiles= -+for ac_file in $ac_files -+do -+ case $ac_file in -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; -+ * ) ac_rmfiles="$ac_rmfiles $ac_file";; -+ esac -+done -+rm -f $ac_rmfiles -+ -+if { (ac_try="$ac_link_default" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_link_default") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then -- # Find the output, starting from the most likely. This scheme is --# not robust to junk in `.', hence go to wildcards (a.*) only as a last --# resort. -- --# Be careful to initialize this variable, since it used to be cached. --# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. --ac_cv_exeext= --# b.out is created by i960 compilers. --for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -+# in a Makefile. We should not override ac_cv_exeext if it was cached, -+# so that the user can short-circuit this test for compilers unknown to -+# Autoconf. -+for ac_file in $ac_files '' - do - test -f "$ac_file" || continue - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) -- ;; -- conftest.$ac_ext ) -- # This is the source file. -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) -- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -- # FIXME: I believe we export ac_cv_exeext for Libtool, -- # but it would be cool to find out if it's true. Does anybody -- # maintain Libtool? --akim. -- export ac_cv_exeext -+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; -+ then :; else -+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -+ fi -+ # We set ac_cv_exeext here because the later test for it is not -+ # safe: cross compilers may not add the suffix if given an `-o' -+ # argument, so we may need to know it at that point already. -+ # Even if this section looks crufty: it has the advantage of -+ # actually working. - break;; - * ) - break;; - esac - done -+test "$ac_cv_exeext" = no && ac_cv_exeext= -+ - else -- echo "$as_me: failed program was:" >&5 -+ ac_file='' -+fi -+ -+{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 -+$as_echo "$ac_file" >&6; } -+if test -z "$ac_file"; then -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables - See \`config.log' for more details." >&5 --echo "$as_me: error: C compiler cannot create executables -+$as_echo "$as_me: error: C compiler cannot create executables - See \`config.log' for more details." >&2;} -- { (exit 77); exit 77; }; } -+ { (exit 77); exit 77; }; }; } - fi - - ac_exeext=$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_file" >&5 --echo "${ECHO_T}$ac_file" >&6 - --# Check the compiler produces executables we can run. If not, either -+# Check that the compiler produces executables we can run. If not, either - # the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether the C compiler works" >&5 --echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -+$as_echo_n "checking whether the C compiler works... " >&6; } - # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 - # If not cross compiling, check that we can run a simple program. - if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ { (case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_try") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else -- { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. - If you meant to cross compile, use \`--host'. - See \`config.log' for more details." >&5 --echo "$as_me: error: cannot run C compiled programs. -+$as_echo "$as_me: error: cannot run C compiled programs. - If you meant to cross compile, use \`--host'. - See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+ { (exit 1); exit 1; }; }; } - fi - fi - fi --echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+{ $as_echo "$as_me:$LINENO: result: yes" >&5 -+$as_echo "yes" >&6; } - --rm -f a.out a.exe conftest$ac_cv_exeext b.out -+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out - ac_clean_files=$ac_clean_files_save --# Check the compiler produces executables we can run. If not, either -+# Check that the compiler produces executables we can run. If not, either - # the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 --echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 --echo "$as_me:$LINENO: result: $cross_compiling" >&5 --echo "${ECHO_T}$cross_compiling" >&6 -- --echo "$as_me:$LINENO: checking for suffix of executables" >&5 --echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -+{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -+$as_echo_n "checking whether we are cross compiling... " >&6; } -+{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 -+$as_echo "$cross_compiling" >&6; } -+ -+{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 -+$as_echo_n "checking for suffix of executables... " >&6; } -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_link") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) - # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -@@ -2178,32 +2826,33 @@ - for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -- export ac_cv_exeext - break;; - * ) break;; - esac - done - else -- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link - See \`config.log' for more details." >&5 --echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -+$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link - See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+ { (exit 1); exit 1; }; }; } - fi - - rm -f conftest$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 --echo "${ECHO_T}$ac_cv_exeext" >&6 -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -+$as_echo "$ac_cv_exeext" >&6; } - - rm -f conftest.$ac_ext - EXEEXT=$ac_cv_exeext - ac_exeext=$EXEEXT --echo "$as_me:$LINENO: checking for suffix of object files" >&5 --echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 -+$as_echo_n "checking for suffix of object files... " >&6; } - if test "${ac_cv_objext+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -2221,39 +2870,48 @@ - } - _ACEOF - rm -f conftest.o conftest.obj --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then -- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do -+ for ac_file in conftest.o conftest.obj conftest.*; do -+ test -f "$ac_file" || continue; - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac - done - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile - See \`config.log' for more details." >&5 --echo "$as_me: error: cannot compute suffix of object files: cannot compile -+$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile - See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+ { (exit 1); exit 1; }; }; } - fi - - rm -f conftest.$ac_cv_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 --echo "${ECHO_T}$ac_cv_objext" >&6 -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -+$as_echo "$ac_cv_objext" >&6; } - OBJEXT=$ac_cv_objext - ac_objext=$OBJEXT --echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 --echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } - if test "${ac_cv_c_compiler_gnu+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -2274,49 +2932,54 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_compiler_gnu=no -+ ac_compiler_gnu=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_c_compiler_gnu=$ac_compiler_gnu - - fi --echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 --echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 --GCC=`test $ac_compiler_gnu = yes && echo yes` -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -+$as_echo "$ac_cv_c_compiler_gnu" >&6; } -+if test $ac_compiler_gnu = yes; then -+ GCC=yes -+else -+ GCC= -+fi - ac_test_CFLAGS=${CFLAGS+set} - ac_save_CFLAGS=$CFLAGS --CFLAGS="-g" --echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 --echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -+$as_echo_n "checking whether $CC accepts -g... " >&6; } - if test "${ac_cv_prog_cc_g+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF -+ ac_save_c_werror_flag=$ac_c_werror_flag -+ ac_c_werror_flag=yes -+ ac_cv_prog_cc_g=no -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ - _ACEOF - cat confdefs.h >>conftest.$ac_ext -@@ -2332,37 +2995,121 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ ac_cv_prog_cc_g=yes -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ CFLAGS="" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ : -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_c_werror_flag=$ac_save_c_werror_flag -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_prog_cc_g=no -+ -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ ac_c_werror_flag=$ac_save_c_werror_flag - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -+$as_echo "$ac_cv_prog_cc_g" >&6; } - if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS - elif test $ac_cv_prog_cc_g = yes; then -@@ -2378,12 +3125,12 @@ - CFLAGS= - fi - fi --echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 --echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 --if test "${ac_cv_prog_cc_stdc+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -+if test "${ac_cv_prog_cc_c89+set}" = set; then -+ $as_echo_n "(cached) " >&6 - else -- ac_cv_prog_cc_stdc=no -+ ac_cv_prog_cc_c89=no - ac_save_CC=$CC - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -2417,12 +3164,17 @@ - /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated -- as 'x'. The following induces an error, until -std1 is added to get -+ as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something -- that's true only with -std1. */ -+ that's true only with -std. */ - int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters -+ inside strings and character constants. */ -+#define FOO(x) 'x' -+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; -+ - int test (int i, double x); - struct s1 {int (*f) (int a);}; - struct s2 {int (*f) (double a);}; -@@ -2437,201 +3189,58 @@ - return 0; - } - _ACEOF --# Don't try gcc -ansi; that turns off useful extensions and --# breaks some systems' header files. --# AIX -qlanglvl=ansi --# Ultrix and OSF/1 -std1 --# HP-UX 10.20 and later -Ae --# HP-UX older versions -Aa -D_HPUX_SOURCE --# SVR4 -Xc -D__EXTENSIONS__ --for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" - do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_prog_cc_stdc=$ac_arg --break -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ ac_cv_prog_cc_c89=$ac_arg - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext -+ -+rm -f core conftest.err conftest.$ac_objext -+ test "x$ac_cv_prog_cc_c89" != "xno" && break - done --rm -f conftest.$ac_ext conftest.$ac_objext -+rm -f conftest.$ac_ext - CC=$ac_save_CC - - fi -- --case "x$ac_cv_prog_cc_stdc" in -- x|xno) -- echo "$as_me:$LINENO: result: none needed" >&5 --echo "${ECHO_T}none needed" >&6 ;; -+# AC_CACHE_VAL -+case "x$ac_cv_prog_cc_c89" in -+ x) -+ { $as_echo "$as_me:$LINENO: result: none needed" >&5 -+$as_echo "none needed" >&6; } ;; -+ xno) -+ { $as_echo "$as_me:$LINENO: result: unsupported" >&5 -+$as_echo "unsupported" >&6; } ;; - *) -- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 -- CC="$CC $ac_cv_prog_cc_stdc" ;; -+ CC="$CC $ac_cv_prog_cc_c89" -+ { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; - esac - --# Some people use a C++ compiler to compile C. Since we use `exit', --# in C++ we need to declare it. In case someone uses the same compiler --# for both compiling C and C++ we need to have the C++ compiler decide --# the declaration of exit, since it's the most demanding environment. --cat >conftest.$ac_ext <<_ACEOF --#ifndef __cplusplus -- choke me --#endif --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- for ac_declaration in \ -- '' \ -- 'extern "C" void std::exit (int) throw (); using std::exit;' \ -- 'extern "C" void std::exit (int); using std::exit;' \ -- 'extern "C" void exit (int) throw ();' \ -- 'extern "C" void exit (int);' \ -- 'void exit (int);' --do -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_declaration --#include <stdlib.h> --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- : --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --continue --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_declaration --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- break --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --done --rm -f conftest* --if test -n "$ac_declaration"; then -- echo '#ifdef __cplusplus' >>confdefs.h -- echo $ac_declaration >>confdefs.h -- echo '#endif' >>confdefs.h --fi -- --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -@@ -2639,7 +3248,7 @@ - ac_compiler_gnu=$ac_cv_c_compiler_gnu - DEPDIR="${am__leading_dot}deps" - -- ac_config_commands="$ac_config_commands depfiles" -+ac_config_commands="$ac_config_commands depfiles" - - - am_make=${MAKE-make} -@@ -2649,8 +3258,8 @@ - .PHONY: am__doit - END - # If we don't find an include directive, just comment out the code. --echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 --echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -+$as_echo_n "checking for style of include used by $am_make... " >&6; } - am__include="#" - am__quote= - _am_result=none -@@ -2677,22 +3286,20 @@ - fi - - --echo "$as_me:$LINENO: result: $_am_result" >&5 --echo "${ECHO_T}$_am_result" >&6 -+{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 -+$as_echo "$_am_result" >&6; } - rm -f confinc confmf - --# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. -+# Check whether --enable-dependency-tracking was given. - if test "${enable_dependency_tracking+set}" = set; then -- enableval="$enable_dependency_tracking" -+ enableval=$enable_dependency_tracking; -+fi - --fi; - if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - fi -- -- --if test "x$enable_dependency_tracking" != xno; then -+ if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' - else -@@ -2702,13 +3309,12 @@ - - - -- - depcc="$CC" am_compiler_list= - --echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 --echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -+$as_echo_n "checking dependency style of $depcc... " >&6; } - if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up -@@ -2744,7 +3350,9 @@ - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c -- : > sub/conftst$i.h -+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with -+ # Solaris 8's {/usr,}/bin/sh. -+ touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - -@@ -2768,13 +3376,19 @@ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && -+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings -- # (even with -Werror). So we grep stderr for any message -- # that says an option was ignored. -- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else -+ # or remarks (even with -Werror). So we grep stderr for any message -+ # that says an option was ignored or not supported. -+ # When given -MP, icc 7.0 and 7.1 complain thusly: -+ # icc: Command line warning: ignoring option '-M'; no argument required -+ # The diagnosis changed in icc 8.0: -+ # icc: Command line remark: option '-MP' not supported -+ if (grep 'ignoring option' conftest.err || -+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi -@@ -2788,13 +3402,11 @@ - fi - - fi --echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 --echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -+{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } - CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - -- -- --if -+ if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= -@@ -2818,11 +3430,12 @@ - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" - # OS/2's system install, which has a completely different semantic - # ./install, which can be erroneously created by make from ./install.sh. --echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 --echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -+# Reject install programs that cannot install multiple files. -+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+$as_echo_n "checking for a BSD-compatible install... " >&6; } - if test -z "$INSTALL"; then - if test "${ac_cv_path_install+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH -@@ -2841,7 +3454,7 @@ - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. -@@ -2851,30 +3464,43 @@ - # program-specific install script used by HP pwplus--don't use. - : - else -- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -- break 3 -+ rm -rf conftest.one conftest.two conftest.dir -+ echo one > conftest.one -+ echo two > conftest.two -+ mkdir conftest.dir -+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && -+ test -s conftest.one && test -s conftest.two && -+ test -s conftest.dir/conftest.one && -+ test -s conftest.dir/conftest.two -+ then -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 -+ fi - fi - fi - done - done - ;; - esac -+ - done -+IFS=$as_save_IFS - -+rm -rf conftest.one conftest.two conftest.dir - - fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else -- # As a last resort, use the slow shell script. We don't cache a -- # path for INSTALL within a source directory, because that will -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is -- # removed, or if the path is relative. -+ # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi - fi --echo "$as_me:$LINENO: result: $INSTALL" >&5 --echo "${ECHO_T}$INSTALL" >&6 -+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 -+$as_echo "$INSTALL" >&6; } - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. -@@ -2886,10 +3512,10 @@ - - - --echo "$as_me:$LINENO: checking for snd_pcm_open in -lasound" >&5 --echo $ECHO_N "checking for snd_pcm_open in -lasound... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for snd_pcm_open in -lasound" >&5 -+$as_echo_n "checking for snd_pcm_open in -lasound... " >&6; } - if test "${ac_cv_lib_asound_snd_pcm_open+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS - LIBS="-lasound $LIBS" -@@ -2900,56 +3526,58 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char snd_pcm_open (); - int - main () - { --snd_pcm_open (); -+return snd_pcm_open (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && { -+ test "$cross_compiling" = yes || -+ $as_test_x conftest$ac_exeext -+ }; then - ac_cv_lib_asound_snd_pcm_open=yes - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_asound_snd_pcm_open=no -+ ac_cv_lib_asound_snd_pcm_open=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -rf conftest.dSYM -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_asound_snd_pcm_open" >&5 --echo "${ECHO_T}$ac_cv_lib_asound_snd_pcm_open" >&6 --if test $ac_cv_lib_asound_snd_pcm_open = yes; then -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_asound_snd_pcm_open" >&5 -+$as_echo "$ac_cv_lib_asound_snd_pcm_open" >&6; } -+if test "x$ac_cv_lib_asound_snd_pcm_open" = x""yes; then - cat >>confdefs.h <<_ACEOF - #define HAVE_LIBASOUND 1 - _ACEOF -@@ -2957,16 +3585,16 @@ - LIBS="-lasound $LIBS" - - else -- { { echo "$as_me:$LINENO: error: Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6" >&5 --echo "$as_me: error: Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6" >&2;} -+ { { $as_echo "$as_me:$LINENO: error: Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6" >&5 -+$as_echo "$as_me: error: Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6" >&2;} - { (exit 1); exit 1; }; } - fi - - --echo "$as_me:$LINENO: checking for fftwf_plan_dft_r2c_1d in -lfftw3f" >&5 --echo $ECHO_N "checking for fftwf_plan_dft_r2c_1d in -lfftw3f... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for fftwf_plan_dft_r2c_1d in -lfftw3f" >&5 -+$as_echo_n "checking for fftwf_plan_dft_r2c_1d in -lfftw3f... " >&6; } - if test "${ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS - LIBS="-lfftw3f $LIBS" -@@ -2977,56 +3605,58 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char fftwf_plan_dft_r2c_1d (); - int - main () - { --fftwf_plan_dft_r2c_1d (); -+return fftwf_plan_dft_r2c_1d (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && { -+ test "$cross_compiling" = yes || -+ $as_test_x conftest$ac_exeext -+ }; then - ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d=yes - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d=no -+ ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -rf conftest.dSYM -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" >&5 --echo "${ECHO_T}$ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" >&6 --if test $ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d = yes; then -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" >&5 -+$as_echo "$ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" >&6; } -+if test "x$ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" = x""yes; then - cat >>confdefs.h <<_ACEOF - #define HAVE_LIBFFTW3F 1 - _ACEOF -@@ -3034,102 +3664,38 @@ - LIBS="-lfftw3f $LIBS" - - else -- { { echo "$as_me:$LINENO: error: Couldn't find FFTW3 library. You must install it first." >&5 --echo "$as_me: error: Couldn't find FFTW3 library. You must install it first." >&2;} -+ { { $as_echo "$as_me:$LINENO: error: Couldn't find FFTW3 library. You must install it first." >&5 -+$as_echo "$as_me: error: Couldn't find FFTW3 library. You must install it first." >&2;} - { (exit 1); exit 1; }; } - fi - -- --echo "$as_me:$LINENO: checking for jack_client_new in -ljack" >&5 --echo $ECHO_N "checking for jack_client_new in -ljack... $ECHO_C" >&6 --if test "${ac_cv_lib_jack_jack_client_new+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ljack $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -- --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char jack_client_new (); --int --main () --{ --jack_client_new (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_jack_jack_client_new=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_cv_lib_jack_jack_client_new=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_jack_jack_client_new" >&5 --echo "${ECHO_T}$ac_cv_lib_jack_jack_client_new" >&6 --if test $ac_cv_lib_jack_jack_client_new = yes; then -- cat >>confdefs.h <<_ACEOF --#define HAVE_LIBJACK 1 --_ACEOF -- -- LIBS="-ljack $LIBS" -- --else -- { { echo "$as_me:$LINENO: error: Couldn't find JACK library. You must install it first." >&5 --echo "$as_me: error: Couldn't find JACK library. You must install it first." >&2;} -- { (exit 1); exit 1; }; } -+{ $as_echo "$as_me:$LINENO: checking whether to enable JACK" >&5 -+$as_echo_n "checking whether to enable JACK... " >&6; } -+# Check whether --enable-jack was given. -+if test "${enable_jack+set}" = set; then -+ enableval=$enable_jack; enable_jack=$enableval -+else -+ enable_jack=yes - fi - --ac_ext=c -+if test "x$enable_jack" = "xyes"; then -+ { $as_echo "$as_me:$LINENO: result: yes" >&5 -+$as_echo "yes" >&6; } -+ CFLAGS="$CFLAGS -DHAVE_JACK" -+ ac_ext=c - ac_cpp='$CPP $CPPFLAGS' - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' - ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' - ac_compiler_gnu=$ac_cv_c_compiler_gnu --echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 --echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -+$as_echo_n "checking how to run the C preprocessor... " >&6; } - # On Suns, sometimes $CPP names a directory. - if test -n "$CPP" && test -d "$CPP"; then - CPP= - fi - if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" -@@ -3156,35 +3722,35 @@ - #endif - Syntax error - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - : - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. - continue - fi -+ - rm -f conftest.err conftest.$ac_ext - -- # OK, works on sane cases. Now check whether non-existent headers -+ # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -3194,34 +3760,34 @@ - /* end confdefs.h. */ - #include <ac_nonexistent.h> - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - # Broken: success on invalid input. - continue - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. - ac_preproc_ok=: - break - fi -+ - rm -f conftest.err conftest.$ac_ext - - done -@@ -3239,8 +3805,8 @@ - else - ac_cv_prog_CPP=$CPP - fi --echo "$as_me:$LINENO: result: $CPP" >&5 --echo "${ECHO_T}$CPP" >&6 -+{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 -+$as_echo "$CPP" >&6; } - ac_preproc_ok=false - for ac_c_preproc_warn_flag in '' yes - do -@@ -3263,35 +3829,35 @@ - #endif - Syntax error - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - : - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. - continue - fi -+ - rm -f conftest.err conftest.$ac_ext - -- # OK, works on sane cases. Now check whether non-existent headers -+ # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -3301,34 +3867,34 @@ - /* end confdefs.h. */ - #include <ac_nonexistent.h> - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - # Broken: success on invalid input. - continue - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. - ac_preproc_ok=: - break - fi -+ - rm -f conftest.err conftest.$ac_ext - - done -@@ -3337,11 +3903,13 @@ - if $ac_preproc_ok; then - : - else -- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check - See \`config.log' for more details." >&5 --echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -+$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check - See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+ { (exit 1); exit 1; }; }; } - fi - - ac_ext=c -@@ -3351,25 +3919,144 @@ - ac_compiler_gnu=$ac_cv_c_compiler_gnu - - --echo "$as_me:$LINENO: checking for egrep" >&5 --echo $ECHO_N "checking for egrep... $ECHO_C" >&6 --if test "${ac_cv_prog_egrep+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 -- then ac_cv_prog_egrep='grep -E' -- else ac_cv_prog_egrep='egrep' -+{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 -+$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -+if test "${ac_cv_path_GREP+set}" = set; then -+ $as_echo_n "(cached) " >&6 -+else -+ if test -z "$GREP"; then -+ ac_path_GREP_found=false -+ # Loop through the user's path and test for each of PROGNAME-LIST -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in grep ggrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -+# Check for GNU ac_path_GREP and select it if it is found. -+ # Check for GNU $ac_path_GREP -+case `"$ac_path_GREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -+*) -+ ac_count=0 -+ $as_echo_n 0123456789 >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ $as_echo 'GREP' >> "conftest.nl" -+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_GREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_GREP="$ac_path_GREP" -+ ac_path_GREP_max=$ac_count -+ fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ $ac_path_GREP_found && break 3 -+ done -+ done -+done -+IFS=$as_save_IFS -+ if test -z "$ac_cv_path_GREP"; then -+ { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -+$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} -+ { (exit 1); exit 1; }; } -+ fi -+else -+ ac_cv_path_GREP=$GREP -+fi -+ -+fi -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 -+$as_echo "$ac_cv_path_GREP" >&6; } -+ GREP="$ac_cv_path_GREP" -+ -+ -+{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 -+$as_echo_n "checking for egrep... " >&6; } -+if test "${ac_cv_path_EGREP+set}" = set; then -+ $as_echo_n "(cached) " >&6 -+else -+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 -+ then ac_cv_path_EGREP="$GREP -E" -+ else -+ if test -z "$EGREP"; then -+ ac_path_EGREP_found=false -+ # Loop through the user's path and test for each of PROGNAME-LIST -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in egrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -+# Check for GNU ac_path_EGREP and select it if it is found. -+ # Check for GNU $ac_path_EGREP -+case `"$ac_path_EGREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -+*) -+ ac_count=0 -+ $as_echo_n 0123456789 >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ $as_echo 'EGREP' >> "conftest.nl" -+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_EGREP="$ac_path_EGREP" -+ ac_path_EGREP_max=$ac_count - fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ $ac_path_EGREP_found && break 3 -+ done -+ done -+done -+IFS=$as_save_IFS -+ if test -z "$ac_cv_path_EGREP"; then -+ { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -+$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} -+ { (exit 1); exit 1; }; } -+ fi -+else -+ ac_cv_path_EGREP=$EGREP - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 --echo "${ECHO_T}$ac_cv_prog_egrep" >&6 -- EGREP=$ac_cv_prog_egrep - -+ fi -+fi -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 -+$as_echo "$ac_cv_path_EGREP" >&6; } -+ EGREP="$ac_cv_path_EGREP" - --echo "$as_me:$LINENO: checking for ANSI C header files" >&5 --echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -+ -+{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -+$as_echo_n "checking for ANSI C header files... " >&6; } - if test "${ac_cv_header_stdc+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ $as_echo_n "(cached) " >&6 - else - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -3391,34 +4078,32 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_header_stdc=no -+ ac_cv_header_stdc=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - - if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -@@ -3474,6 +4159,7 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - #include <ctype.h> -+#include <stdlib.h> - #if ((' ' & 0x0FF) == 0x020) - # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') - # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -@@ -3493,36 +4179,50 @@ - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) -- exit(2); -- exit (0); -+ return 2; -+ return 0; - } - _ACEOF - rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_link") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ { (case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_try") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : - else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: program exited with status $ac_status" >&5 -+$as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - - ( exit $ac_status ) - ac_cv_header_stdc=no - fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -+rm -rf conftest.dSYM -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext - fi -+ -+ - fi - fi --echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 --echo "${ECHO_T}$ac_cv_header_stdc" >&6 -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -+$as_echo "$ac_cv_header_stdc" >&6; } - if test $ac_cv_header_stdc = yes; then - - cat >>confdefs.h <<\_ACEOF -@@ -3544,11 +4244,11 @@ - for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h - do --as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -+$as_echo_n "checking for $ac_header... " >&6; } -+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then -+ $as_echo_n "(cached) " >&6 - else - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -3561,40 +4261,42 @@ - #include <$ac_header> - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --eval "$as_ac_Header=no" -+ eval "$as_ac_Header=no" - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 --if test `eval echo '${'$as_ac_Header'}'` = yes; then -+ac_res=`eval 'as_val=${'$as_ac_Header'} -+ $as_echo "$as_val"'` -+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -+$as_echo "$ac_res" >&6; } -+as_val=`eval 'as_val=${'$as_ac_Header'} -+ $as_echo "$as_val"'` -+ if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 - _ACEOF - - fi -@@ -3602,18 +4304,18 @@ - done - - --if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then -- echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 --echo $ECHO_N "checking for alsa/asoundlib.h... $ECHO_C" >&6 --if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+if test "${ac_cv_header_jack_jack_h+set}" = set; then -+ { $as_echo "$as_me:$LINENO: checking for jack/jack.h" >&5 -+$as_echo_n "checking for jack/jack.h... " >&6; } -+if test "${ac_cv_header_jack_jack_h+set}" = set; then -+ $as_echo_n "(cached) " >&6 - fi --echo "$as_me:$LINENO: result: $ac_cv_header_alsa_asoundlib_h" >&5 --echo "${ECHO_T}$ac_cv_header_alsa_asoundlib_h" >&6 -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_jack_jack_h" >&5 -+$as_echo "$ac_cv_header_jack_jack_h" >&6; } - else - # Is the header compilable? --echo "$as_me:$LINENO: checking alsa/asoundlib.h usability" >&5 --echo $ECHO_N "checking alsa/asoundlib.h usability... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking jack/jack.h usability" >&5 -+$as_echo_n "checking jack/jack.h usability... " >&6; } - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ - _ACEOF -@@ -3621,184 +4323,419 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - $ac_includes_default --#include <alsa/asoundlib.h> -+#include <jack/jack.h> - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_header_compiler=yes - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_header_compiler=no -+ ac_header_compiler=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 --echo "${ECHO_T}$ac_header_compiler" >&6 -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -+$as_echo "$ac_header_compiler" >&6; } - - # Is the header present? --echo "$as_me:$LINENO: checking alsa/asoundlib.h presence" >&5 --echo $ECHO_N "checking alsa/asoundlib.h presence... $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking jack/jack.h presence" >&5 -+$as_echo_n "checking jack/jack.h presence... " >&6; } - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ - _ACEOF - cat confdefs.h >>conftest.$ac_ext - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ --#include <alsa/asoundlib.h> -+#include <jack/jack.h> - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - ac_header_preproc=yes - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no - fi -+ - rm -f conftest.err conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 --echo "${ECHO_T}$ac_header_preproc" >&6 -+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -+$as_echo "$ac_header_preproc" >&6; } - - # So? What about this header? - case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) -- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 --echo "$as_me: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} -- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&5 --echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: accepted by the compiler, rejected by the preprocessor!" >&5 -+$as_echo "$as_me: WARNING: jack/jack.h: accepted by the compiler, rejected by the preprocessor!" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: proceeding with the compiler's result" >&5 -+$as_echo "$as_me: WARNING: jack/jack.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) -- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&5 --echo "$as_me: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&2;} -- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&5 --echo "$as_me: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&2;} -- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&5 --echo "$as_me: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&2;} -- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&5 --echo "$as_me: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&2;} -- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&5 --echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;} -- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&5 --echo "$as_me: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&2;} -- ( -- cat <<\_ASBOX -+ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: present but cannot be compiled" >&5 -+$as_echo "$as_me: WARNING: jack/jack.h: present but cannot be compiled" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: check for missing prerequisite headers?" >&5 -+$as_echo "$as_me: WARNING: jack/jack.h: check for missing prerequisite headers?" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: see the Autoconf documentation" >&5 -+$as_echo "$as_me: WARNING: jack/jack.h: see the Autoconf documentation" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: section \"Present But Cannot Be Compiled\"" >&5 -+$as_echo "$as_me: WARNING: jack/jack.h: section \"Present But Cannot Be Compiled\"" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: proceeding with the preprocessor's result" >&5 -+$as_echo "$as_me: WARNING: jack/jack.h: proceeding with the preprocessor's result" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: in the future, the compiler will take precedence" >&5 -+$as_echo "$as_me: WARNING: jack/jack.h: in the future, the compiler will take precedence" >&2;} -+ ( cat <<\_ASBOX - ## --------------------------------------------- ## - ## Report this to Mario Lang <mlang@delysid.org> ## - ## --------------------------------------------- ## - _ASBOX -- ) | -- sed "s/^/$as_me: WARNING: /" >&2 -+ ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; - esac --echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 --echo $ECHO_N "checking for alsa/asoundlib.h... $ECHO_C" >&6 --if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:$LINENO: checking for jack/jack.h" >&5 -+$as_echo_n "checking for jack/jack.h... " >&6; } -+if test "${ac_cv_header_jack_jack_h+set}" = set; then -+ $as_echo_n "(cached) " >&6 - else -- ac_cv_header_alsa_asoundlib_h=$ac_header_preproc -+ ac_cv_header_jack_jack_h=$ac_header_preproc - fi --echo "$as_me:$LINENO: result: $ac_cv_header_alsa_asoundlib_h" >&5 --echo "${ECHO_T}$ac_cv_header_alsa_asoundlib_h" >&6 -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_jack_jack_h" >&5 -+$as_echo "$ac_cv_header_jack_jack_h" >&6; } - - fi --if test $ac_cv_header_alsa_asoundlib_h = yes; then -+if test "x$ac_cv_header_jack_jack_h" = x""yes; then - : - else -- { { echo "$as_me:$LINENO: error: Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers" >&5 --echo "$as_me: error: Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers" >&2;} -+ { { $as_echo "$as_me:$LINENO: error: JACK headers not found." >&5 -+$as_echo "$as_me: error: JACK headers not found." >&2;} - { (exit 1); exit 1; }; } - fi - - -- ac_config_files="$ac_config_files Makefile src/Makefile" --cat >confcache <<\_ACEOF --# This file is a shell script that caches the results of configure --# tests run on this system so they can be shared between configure --# scripts and configure runs, see configure's option --config-cache. --# It is not useful on other systems. If it contains results you don't --# want to keep, you may remove or edit it. --# --# config.status only pays attention to the cache file if you give it --# the --recheck option to rerun configure. --# --# `ac_cv_env_foo' variables (set or unset) will be overridden when --# loading this file, other *unset* `ac_cv_foo' will be assigned the --# following values. - -+{ $as_echo "$as_me:$LINENO: checking for main in -ljack" >&5 -+$as_echo_n "checking for main in -ljack... " >&6; } -+if test "${ac_cv_lib_jack_main+set}" = set; then -+ $as_echo_n "(cached) " >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-ljack $LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ - _ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --# The following way of writing the cache mishandles newlines in values, --# but we know of no workaround that is simple, portable, and efficient. --# So, don't put newlines in cache variables' values. --# Ultrix sh set writes to stderr and can't be redirected directly, --# and sets the high bit in the cache file unless we assign to the vars. -+ -+int -+main () - { -- (set) 2>&1 | -- case `(ac_space=' '; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -- # `set' does not quote correctly, so add quotes (double-quote -- # substitution turns \\\\ into \\, and sed turns \\ into \). -- sed -n \ -- "s/'/'\\\\''/g; -- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" -- ;; -- *) -- # `set' quotes correctly as required by POSIX, so do not add quotes. -- sed -n \ -- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" -+return main (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_link") 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && { -+ test "$cross_compiling" = yes || -+ $as_test_x conftest$ac_exeext -+ }; then -+ ac_cv_lib_jack_main=yes -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_cv_lib_jack_main=no -+fi -+ -+rm -rf conftest.dSYM -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_jack_main" >&5 -+$as_echo "$ac_cv_lib_jack_main" >&6; } -+if test "x$ac_cv_lib_jack_main" = x""yes; then -+ cat >>confdefs.h <<_ACEOF -+#define HAVE_LIBJACK 1 -+_ACEOF -+ -+ LIBS="-ljack $LIBS" -+ -+else -+ { { $as_echo "$as_me:$LINENO: error: JACK library not found." >&5 -+$as_echo "$as_me: error: JACK library not found." >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+else -+ { $as_echo "$as_me:$LINENO: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then -+ { $as_echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 -+$as_echo_n "checking for alsa/asoundlib.h... " >&6; } -+if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then -+ $as_echo_n "(cached) " >&6 -+fi -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_alsa_asoundlib_h" >&5 -+$as_echo "$ac_cv_header_alsa_asoundlib_h" >&6; } -+else -+ # Is the header compilable? -+{ $as_echo "$as_me:$LINENO: checking alsa/asoundlib.h usability" >&5 -+$as_echo_n "checking alsa/asoundlib.h usability... " >&6; } -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+$ac_includes_default -+#include <alsa/asoundlib.h> -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_compile") 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ ac_header_compiler=yes -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_header_compiler=no -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -+$as_echo "$ac_header_compiler" >&6; } -+ -+# Is the header present? -+{ $as_echo "$as_me:$LINENO: checking alsa/asoundlib.h presence" >&5 -+$as_echo_n "checking alsa/asoundlib.h presence... " >&6; } -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <alsa/asoundlib.h> -+_ACEOF -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -+$as_echo "$ac_try_echo") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then -+ ac_header_preproc=yes -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_header_preproc=no -+fi -+ -+rm -f conftest.err conftest.$ac_ext -+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -+$as_echo "$ac_header_preproc" >&6; } -+ -+# So? What about this header? -+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in -+ yes:no: ) -+ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 -+$as_echo "$as_me: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&5 -+$as_echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&2;} -+ ac_header_preproc=yes -+ ;; -+ no:yes:* ) -+ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&5 -+$as_echo "$as_me: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&5 -+$as_echo "$as_me: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&5 -+$as_echo "$as_me: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&5 -+$as_echo "$as_me: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&5 -+$as_echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;} -+ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&5 -+$as_echo "$as_me: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&2;} -+ ( cat <<\_ASBOX -+## --------------------------------------------- ## -+## Report this to Mario Lang <mlang@delysid.org> ## -+## --------------------------------------------- ## -+_ASBOX -+ ) | sed "s/^/$as_me: WARNING: /" >&2 -+ ;; -+esac -+{ $as_echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 -+$as_echo_n "checking for alsa/asoundlib.h... " >&6; } -+if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then -+ $as_echo_n "(cached) " >&6 -+else -+ ac_cv_header_alsa_asoundlib_h=$ac_header_preproc -+fi -+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_alsa_asoundlib_h" >&5 -+$as_echo "$ac_cv_header_alsa_asoundlib_h" >&6; } -+ -+fi -+if test "x$ac_cv_header_alsa_asoundlib_h" = x""yes; then -+ : -+else -+ { { $as_echo "$as_me:$LINENO: error: Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers" >&5 -+$as_echo "$as_me: error: Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+ -+ac_config_files="$ac_config_files Makefile src/Makefile" -+ -+cat >confcache <<\_ACEOF -+# This file is a shell script that caches the results of configure -+# tests run on this system so they can be shared between configure -+# scripts and configure runs, see configure's option --config-cache. -+# It is not useful on other systems. If it contains results you don't -+# want to keep, you may remove or edit it. -+# -+# config.status only pays attention to the cache file if you give it -+# the --recheck option to rerun configure. -+# -+# `ac_cv_env_foo' variables (set or unset) will be overridden when -+# loading this file, other *unset* `ac_cv_foo' will be assigned the -+# following values. -+ -+_ACEOF -+ -+# The following way of writing the cache mishandles newlines in values, -+# but we know of no workaround that is simple, portable, and efficient. -+# So, we kill variables containing newlines. -+# Ultrix sh set writes to stderr and can't be redirected directly, -+# and sets the high bit in the cache file unless we assign to the vars. -+( -+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 -+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done -+ -+ (set) 2>&1 | -+ case $as_nl`(ac_space=' '; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) -+ # `set' does not quote correctly, so add quotes (double-quote -+ # substitution turns \\\\ into \\, and sed turns \\ into \). -+ sed -n \ -+ "s/'/'\\\\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" -+ ;; #( -+ *) -+ # `set' quotes correctly as required by POSIX, so do not add quotes. -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; -- esac; --} | -+ esac | -+ sort -+) | - sed ' -+ /^ac_cv_env_/b end - t clear -- : clear -+ :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end -- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -- : end' >>confcache --if diff $cache_file confcache >/dev/null 2>&1; then :; else -- if test -w $cache_file; then -- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" -+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -+ :end' >>confcache -+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else -+ if test -w "$cache_file"; then -+ test "x$cache_file" != "x/dev/null" && -+ { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 -+$as_echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else -- echo "not updating unwritable cache $cache_file" -+ { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi - fi - rm -f confcache -@@ -3807,32 +4744,18 @@ - # Let make expand exec_prefix. - test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - --# VPATH may cause trouble with some makes, so we remove $(srcdir), --# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and --# trailing colons and then remove the whole line if VPATH becomes empty --# (actually we leave an empty line to preserve line numbers). --if test "x$srcdir" = x.; then -- ac_vpsub='/^[ ]*VPATH[ ]*=/{ --s/:*\$(srcdir):*/:/; --s/:*\${srcdir}:*/:/; --s/:*@srcdir@:*/:/; --s/^\([^=]*=[ ]*\):*/\1/; --s/:*$//; --s/^[^=]*=[ ]*$//; --}' --fi -- - DEFS=-DHAVE_CONFIG_H - - ac_libobjs= - ac_ltlibobjs= - for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. -- ac_i=`echo "$ac_i" | -- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` -- # 2. Add them. -- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" -- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' -+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"` -+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR -+ # will be set to the directory where LIBOBJS objects are built. -+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" -+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' - done - LIBOBJS=$ac_libobjs - -@@ -3840,26 +4763,27 @@ - - - if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then -- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -+ { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. - Usually this means the macro was only invoked conditionally." >&5 --echo "$as_me: error: conditional \"AMDEP\" was never defined. -+$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. - Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } - fi - if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then -- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -+ { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. - Usually this means the macro was only invoked conditionally." >&5 --echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -+$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. - Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } - fi - - : ${CONFIG_STATUS=./config.status} -+ac_write_fail=0 - ac_clean_files_save=$ac_clean_files - ac_clean_files="$ac_clean_files $CONFIG_STATUS" --{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 --echo "$as_me: creating $CONFIG_STATUS" >&6;} --cat >$CONFIG_STATUS <<_ACEOF -+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - #! $SHELL - # Generated by $as_me. - # Run this file to recreate the current configuration. -@@ -3872,22 +4796,78 @@ - SHELL=\${CONFIG_SHELL-$SHELL} - _ACEOF - --cat >>$CONFIG_STATUS <<\_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - ## --------------------- ## - ## M4sh Initialization. ## - ## --------------------- ## - --# Be Bourne compatible -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh - if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: -- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' --elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -- set -o posix -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+as_nl=' -+' -+export as_nl -+# Printing a long string crashes Solaris 7 /usr/bin/printf. -+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then -+ as_echo='printf %s\n' -+ as_echo_n='printf %s' -+else -+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then -+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' -+ as_echo_n='/usr/ucb/echo -n' -+ else -+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' -+ as_echo_n_body='eval -+ arg=$1; -+ case $arg in -+ *"$as_nl"*) -+ expr "X$arg" : "X\\(.*\\)$as_nl"; -+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; -+ esac; -+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" -+ ' -+ export as_echo_n_body -+ as_echo_n='sh -c $as_echo_n_body as_echo' -+ fi -+ export as_echo_body -+ as_echo='sh -c $as_echo_body as_echo' -+fi -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ PATH_SEPARATOR=: -+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { -+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || -+ PATH_SEPARATOR=';' -+ } - fi --DUALCASE=1; export DUALCASE # for MKS sh - - # Support unset when possible. - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -@@ -3897,33 +4877,60 @@ - fi - - -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ - # Work around bugs in pre-3.0 UWIN ksh. --$as_unset ENV MAIL MAILPATH -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done - PS1='$ ' - PS2='> ' - PS4='+ ' - - # NLS nuisances. --for as_var in \ -- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -- LC_TELEPHONE LC_TIME --do -- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -- eval $as_var=C; export $as_var -- else -- $as_unset $as_var -- fi --done -+LC_ALL=C -+export LC_ALL -+LANGUAGE=C -+export LANGUAGE - - # Required to use basename. --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - --if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename - else - as_basename=false -@@ -3931,159 +4938,122 @@ - - - # Name of the executable. --as_me=`$as_basename "$0" || -+as_me=`$as_basename -- "$0" || - $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)$' \| \ -- . : '\(.\)' 2>/dev/null || --echo X/"$0" | -- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -- /^X\/\(\/\/\)$/{ s//\1/; q; } -- /^X\/\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+$as_echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - --# PATH needs CR, and LINENO needs CR and PATH. --# Avoid depending upon Character Ranges. --as_cr_letters='abcdefghijklmnopqrstuvwxyz' --as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' --as_cr_Letters=$as_cr_letters$as_cr_LETTERS --as_cr_digits='0123456789' --as_cr_alnum=$as_cr_Letters$as_cr_digits -+# CDPATH. -+$as_unset CDPATH - --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- echo "#! /bin/sh" >conf$$.sh -- echo "exit 0" >>conf$$.sh -- chmod +x conf$$.sh -- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -- PATH_SEPARATOR=';' -- else -- PATH_SEPARATOR=: -- fi -- rm -f conf$$.sh --fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" || { -- # Find who we are. Look in the path if we contain no path at all -- # relative or not. -- case $0 in -- *[\\/]* ) as_myself=$0 ;; -- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break --done -- -- ;; -- esac -- # We did not find ourselves, most probably we were run as `sh COMMAND' -- # in which case we are not to be found in the path. -- if test "x$as_myself" = x; then -- as_myself=$0 -- fi -- if test ! -f "$as_myself"; then -- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 --echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} -- { (exit 1); exit 1; }; } -- fi -- case $CONFIG_SHELL in -- '') -- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for as_base in sh bash ksh sh5; do -- case $as_dir in -- /*) -- if ("$as_dir/$as_base" -c ' -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -- CONFIG_SHELL=$as_dir/$as_base -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$0" ${1+"$@"} -- fi;; -- esac -- done --done --;; -- esac -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a -- # line-number line before each line; the second 'sed' does the real -- # work. The second script uses 'N' to pair each line-number line -- # with the numbered line, and appends trailing '-' during -- # substitution so that $LINENO is not a special case at line end. -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -- sed '=' <$as_myself | -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | - sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno - N -- s,$,-, -- : loop -- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop -- s,-$,, -- s,^['$as_cr_digits']*\n,, -+ s/-\n.*// - ' >$as_me.lineno && -- chmod +x $as_me.lineno || -- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 --echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} -+ chmod +x "$as_me.lineno" || -+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensible to this). -- . ./$as_me.lineno -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" - # Exit status is that of the last command. - exit - } - - --case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -- *c*,-n*) ECHO_N= ECHO_C=' --' ECHO_T=' ' ;; -- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; --esac -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi - --if expr a : '\(a\)' >/dev/null 2>&1; then -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - - rm -f conf$$ conf$$.exe conf$$.file --echo >conf$$.file --if ln -s conf$$.file conf$$ 2>/dev/null; then -- # We could just check for DJGPP; but this test a) works b) is more generic -- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -- if test -f conf$$.exe; then -- # Don't use ln at all; we don't have any links -- as_ln_s='cp -p' -- else -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir 2>/dev/null -+fi -+if (echo >conf$$.file) 2>/dev/null; then -+ if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+ elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+ else -+ as_ln_s='cp -p' - fi --elif ln conf$$.file conf$$ 2>/dev/null; then -- as_ln_s=ln - else - as_ln_s='cp -p' - fi --rm -f conf$$ conf$$.exe conf$$.file -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null - - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -@@ -4092,7 +5062,28 @@ - as_mkdir_p=false - fi - --as_executable_p="test -f" -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x - - # Sed expression to map a string onto a valid CPP name. - as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -@@ -4101,31 +5092,14 @@ - as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - --# IFS --# We need space, tab and new line, in precisely that order. --as_nl=' --' --IFS=" $as_nl" -- --# CDPATH. --$as_unset CDPATH -- - exec 6>&1 - --# Open the log real soon, to keep \$[0] and so on meaningful, and to -+# Save the log message, to keep $[0] and so on meaningful, and to - # report actual input values of CONFIG_FILES etc. instead of their --# values after options handling. Logging --version etc. is OK. --exec 5>>config.log --{ -- echo -- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX --## Running $as_me. ## --_ASBOX --} >&5 --cat >&5 <<_CSEOF -- -+# values after options handling. -+ac_log=" - This file was extended by tuneit $as_me 0.3, which was --generated by GNU Autoconf 2.59. Invocation command line was -+generated by GNU Autoconf 2.63. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS -@@ -4133,45 +5107,45 @@ - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - --_CSEOF --echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 --echo >&5 -+on `(hostname || uname -n) 2>/dev/null | sed 1q` -+" -+ - _ACEOF - --# Files that config.status was made for. --if test -n "$ac_config_files"; then -- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS --fi -+case $ac_config_files in *" -+"*) set x $ac_config_files; shift; ac_config_files=$*;; -+esac - --if test -n "$ac_config_headers"; then -- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS --fi -+case $ac_config_headers in *" -+"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -+esac - --if test -n "$ac_config_links"; then -- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS --fi - --if test -n "$ac_config_commands"; then -- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS --fi -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+# Files that config.status was made for. -+config_files="$ac_config_files" -+config_headers="$ac_config_headers" -+config_commands="$ac_config_commands" - --cat >>$CONFIG_STATUS <<\_ACEOF -+_ACEOF - -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - ac_cs_usage="\ - \`$as_me' instantiates files from templates according to the - current configuration. - --Usage: $0 [OPTIONS] [FILE]... -+Usage: $0 [OPTION]... [FILE]... - - -h, --help print this help, then exit -- -V, --version print version number, then exit -- -q, --quiet do not print progress messages -+ -V, --version print version number and configuration settings, then exit -+ -q, --quiet, --silent -+ do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions -- --file=FILE[:TEMPLATE] -- instantiate the configuration file FILE -- --header=FILE[:TEMPLATE] -- instantiate the configuration header FILE -+ --file=FILE[:TEMPLATE] -+ instantiate the configuration file FILE -+ --header=FILE[:TEMPLATE] -+ instantiate the configuration header FILE - - Configuration files: - $config_files -@@ -4183,83 +5157,84 @@ - $config_commands - - Report bugs to <bug-autoconf@gnu.org>." --_ACEOF - --cat >>$CONFIG_STATUS <<_ACEOF -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_cs_version="\\ - tuneit config.status 0.3 --configured by $0, generated by GNU Autoconf 2.59, -- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" -+configured by $0, generated by GNU Autoconf 2.63, -+ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" - --Copyright (C) 2003 Free Software Foundation, Inc. -+Copyright (C) 2008 Free Software Foundation, Inc. - This config.status script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it." --srcdir=$srcdir --INSTALL="$INSTALL" -+ -+ac_pwd='$ac_pwd' -+srcdir='$srcdir' -+INSTALL='$INSTALL' -+MKDIR_P='$MKDIR_P' -+AWK='$AWK' -+test -n "\$AWK" || AWK=awk - _ACEOF - --cat >>$CONFIG_STATUS <<\_ACEOF --# If no file are specified by the user, then we need to provide default --# value. By we need to know if files were specified by the user. -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+# The default lists apply if the user does not specify any file. - ac_need_defaults=: - while test $# != 0 - do - case $1 in - --*=*) -- ac_option=`expr "x$1" : 'x\([^=]*\)='` -- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` -+ ac_option=`expr "X$1" : 'X\([^=]*\)='` -+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; -- -*) -+ *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; -- *) # This is not an option, so the user has probably given explicit -- # arguments. -- ac_option=$1 -- ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. --_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; -- --version | --vers* | -V ) -- echo "$ac_cs_version"; exit 0 ;; -- --he | --h) -- # Conflict between --help and --header -- { { echo "$as_me:$LINENO: error: ambiguous option: $1 --Try \`$0 --help' for more information." >&5 --echo "$as_me: error: ambiguous option: $1 --Try \`$0 --help' for more information." >&2;} -- { (exit 1); exit 1; }; };; -- --help | --hel | -h ) -- echo "$ac_cs_usage"; exit 0 ;; -- --debug | --d* | -d ) -+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) -+ $as_echo "$ac_cs_version"; exit ;; -+ --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift -- CONFIG_FILES="$CONFIG_FILES $ac_optarg" -+ case $ac_optarg in -+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ esac -+ CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift -- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" -+ case $ac_optarg in -+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ esac -+ CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" - ac_need_defaults=false;; -+ --he | --h) -+ # Conflict between --help and --header -+ { $as_echo "$as_me: error: ambiguous option: $1 -+Try \`$0 --help' for more information." >&2 -+ { (exit 1); exit 1; }; };; -+ --help | --hel | -h ) -+ $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. -- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 --Try \`$0 --help' for more information." >&5 --echo "$as_me: error: unrecognized option: $1 --Try \`$0 --help' for more information." >&2;} -+ -*) { $as_echo "$as_me: error: unrecognized option: $1 -+Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; - -- *) ac_config_targets="$ac_config_targets $1" ;; -+ *) ac_config_targets="$ac_config_targets $1" -+ ac_need_defaults=false ;; - - esac - shift -@@ -4273,40 +5248,54 @@ - fi - - _ACEOF --cat >>$CONFIG_STATUS <<_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - if \$ac_cs_recheck; then -- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -+ shift -+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 -+ CONFIG_SHELL='$SHELL' -+ export CONFIG_SHELL -+ exec "\$@" - fi - - _ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+exec 5>>config.log -+{ -+ echo -+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -+## Running $as_me. ## -+_ASBOX -+ $as_echo "$ac_log" -+} >&5 - --cat >>$CONFIG_STATUS <<_ACEOF -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - # --# INIT-COMMANDS section. -+# INIT-COMMANDS - # -- - AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - _ACEOF - -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -- --cat >>$CONFIG_STATUS <<\_ACEOF -+# Handling of arguments. - for ac_config_target in $ac_config_targets - do -- case "$ac_config_target" in -- # Handling of arguments. -- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; -- "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; -- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; -- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; -- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 --echo "$as_me: error: invalid argument: $ac_config_target" >&2;} -+ case $ac_config_target in -+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; -+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; -+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; -+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; -+ -+ *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac - done - -+ - # If the user did not use the arguments to specify the items to instantiate, - # then the envvar interface is used. Set only those that are not. - # We use the long form for the default assignment because of an extremely -@@ -4318,712 +5307,642 @@ - fi - - # Have a temporary directory for convenience. Make it in the build tree --# simply because there is no reason to put it here, and in addition, -+# simply because there is no reason against having it here, and in addition, - # creating and moving files from /tmp can sometimes cause problems. --# Create a temporary directory, and hook for its removal unless debugging. -+# Hook for its removal unless debugging. -+# Note that there is a small window in which the directory will not be cleaned: -+# after its creation but before its name has been assigned to `$tmp'. - $debug || - { -- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 -+ tmp= -+ trap 'exit_status=$? -+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -+' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 - } -- - # Create a (secure) tmp directory for tmp files. - - { -- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && -+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" - } || - { -- tmp=./confstat$$-$RANDOM -- (umask 077 && mkdir $tmp) -+ tmp=./conf$$-$RANDOM -+ (umask 077 && mkdir "$tmp") - } || - { -- echo "$me: cannot create a temporary directory in ." >&2 -+ $as_echo "$as_me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } - } - -+# Set up the scripts for CONFIG_FILES section. -+# No need to generate them if there are no CONFIG_FILES. -+# This happens for instance with `./config.status config.h'. -+if test -n "$CONFIG_FILES"; then -+ -+ -+ac_cr='
' -+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` -+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then -+ ac_cs_awk_cr='\\r' -+else -+ ac_cs_awk_cr=$ac_cr -+fi -+ -+echo 'BEGIN {' >"$tmp/subs1.awk" && - _ACEOF - --cat >>$CONFIG_STATUS <<_ACEOF - --# --# CONFIG_FILES section. --# -+{ -+ echo "cat >conf$$subs.awk <<_ACEOF" && -+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && -+ echo "_ACEOF" -+} >conf$$subs.sh || -+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` -+ac_delim='%!_!# ' -+for ac_last_try in false false false false false :; do -+ . ./conf$$subs.sh || -+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } - --# No need to generate the scripts if there are no CONFIG_FILES. --# This happens for instance when ./config.status config.h --if test -n "\$CONFIG_FILES"; then -- # Protect against being on the right side of a sed subst in config.status. -- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; -- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF --s,@SHELL@,$SHELL,;t t --s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t --s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t --s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t --s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t --s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t --s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t --s,@exec_prefix@,$exec_prefix,;t t --s,@prefix@,$prefix,;t t --s,@program_transform_name@,$program_transform_name,;t t --s,@bindir@,$bindir,;t t --s,@sbindir@,$sbindir,;t t --s,@libexecdir@,$libexecdir,;t t --s,@datadir@,$datadir,;t t --s,@sysconfdir@,$sysconfdir,;t t --s,@sharedstatedir@,$sharedstatedir,;t t --s,@localstatedir@,$localstatedir,;t t --s,@libdir@,$libdir,;t t --s,@includedir@,$includedir,;t t --s,@oldincludedir@,$oldincludedir,;t t --s,@infodir@,$infodir,;t t --s,@mandir@,$mandir,;t t --s,@build_alias@,$build_alias,;t t --s,@host_alias@,$host_alias,;t t --s,@target_alias@,$target_alias,;t t --s,@DEFS@,$DEFS,;t t --s,@ECHO_C@,$ECHO_C,;t t --s,@ECHO_N@,$ECHO_N,;t t --s,@ECHO_T@,$ECHO_T,;t t --s,@LIBS@,$LIBS,;t t --s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t --s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t --s,@INSTALL_DATA@,$INSTALL_DATA,;t t --s,@CYGPATH_W@,$CYGPATH_W,;t t --s,@PACKAGE@,$PACKAGE,;t t --s,@VERSION@,$VERSION,;t t --s,@ACLOCAL@,$ACLOCAL,;t t --s,@AUTOCONF@,$AUTOCONF,;t t --s,@AUTOMAKE@,$AUTOMAKE,;t t --s,@AUTOHEADER@,$AUTOHEADER,;t t --s,@MAKEINFO@,$MAKEINFO,;t t --s,@AMTAR@,$AMTAR,;t t --s,@install_sh@,$install_sh,;t t --s,@STRIP@,$STRIP,;t t --s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t --s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t --s,@AWK@,$AWK,;t t --s,@SET_MAKE@,$SET_MAKE,;t t --s,@am__leading_dot@,$am__leading_dot,;t t --s,@CC@,$CC,;t t --s,@CFLAGS@,$CFLAGS,;t t --s,@LDFLAGS@,$LDFLAGS,;t t --s,@CPPFLAGS@,$CPPFLAGS,;t t --s,@ac_ct_CC@,$ac_ct_CC,;t t --s,@EXEEXT@,$EXEEXT,;t t --s,@OBJEXT@,$OBJEXT,;t t --s,@DEPDIR@,$DEPDIR,;t t --s,@am__include@,$am__include,;t t --s,@am__quote@,$am__quote,;t t --s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t --s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t --s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t --s,@CCDEPMODE@,$CCDEPMODE,;t t --s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t --s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t --s,@CPP@,$CPP,;t t --s,@EGREP@,$EGREP,;t t --s,@LIBOBJS@,$LIBOBJS,;t t --s,@LTLIBOBJS@,$LTLIBOBJS,;t t --CEOF -- --_ACEOF -- -- cat >>$CONFIG_STATUS <<\_ACEOF -- # Split the substitutions into bite-sized pieces for seds with -- # small command number limits, like on Digital OSF/1 and HP-UX. -- ac_max_sed_lines=48 -- ac_sed_frag=1 # Number of current file. -- ac_beg=1 # First line for current file. -- ac_end=$ac_max_sed_lines # Line after last line for current file. -- ac_more_lines=: -- ac_sed_cmds= -- while $ac_more_lines; do -- if test $ac_beg -gt 1; then -- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -- else -- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -- fi -- if test ! -s $tmp/subs.frag; then -- ac_more_lines=false -- else -- # The purpose of the label and of the branching condition is to -- # speed up the sed processing (if there are no `@' at all, there -- # is no need to browse any of the substitutions). -- # These are the two extra sed commands mentioned above. -- (echo ':t -- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed -- if test -z "$ac_sed_cmds"; then -- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" -- else -- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" -- fi -- ac_sed_frag=`expr $ac_sed_frag + 1` -- ac_beg=$ac_end -- ac_end=`expr $ac_end + $ac_max_sed_lines` -- fi -- done -- if test -z "$ac_sed_cmds"; then -- ac_sed_cmds=cat -+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` -+ if test $ac_delim_n = $ac_delim_num; then -+ break -+ elif $ac_last_try; then -+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -+done -+rm -f conf$$subs.sh -+ -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+cat >>"\$tmp/subs1.awk" <<\\_ACAWK && -+_ACEOF -+sed -n ' -+h -+s/^/S["/; s/!.*/"]=/ -+p -+g -+s/^[^!]*!// -+:repl -+t repl -+s/'"$ac_delim"'$// -+t delim -+:nl -+h -+s/\(.\{148\}\).*/\1/ -+t more1 -+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -+p -+n -+b repl -+:more1 -+s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -+p -+g -+s/.\{148\}// -+t nl -+:delim -+h -+s/\(.\{148\}\).*/\1/ -+t more2 -+s/["\\]/\\&/g; s/^/"/; s/$/"/ -+p -+b -+:more2 -+s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -+p -+g -+s/.\{148\}// -+t delim -+' <conf$$subs.awk | sed ' -+/^[^""]/{ -+ N -+ s/\n// -+} -+' >>$CONFIG_STATUS || ac_write_fail=1 -+rm -f conf$$subs.awk -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+_ACAWK -+cat >>"\$tmp/subs1.awk" <<_ACAWK && -+ for (key in S) S_is_set[key] = 1 -+ FS = "" -+ -+} -+{ -+ line = $ 0 -+ nfields = split(line, field, "@") -+ substed = 0 -+ len = length(field[1]) -+ for (i = 2; i < nfields; i++) { -+ key = field[i] -+ keylen = length(key) -+ if (S_is_set[key]) { -+ value = S[key] -+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) -+ len += length(value) + length(field[++i]) -+ substed = 1 -+ } else -+ len += 1 + keylen -+ } -+ -+ print line -+} -+ -+_ACAWK -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then -+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -+else -+ cat -+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ -+ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 -+$as_echo "$as_me: error: could not setup config files machinery" >&2;} -+ { (exit 1); exit 1; }; } -+_ACEOF -+ -+# VPATH may cause trouble with some makes, so we remove $(srcdir), -+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -+# trailing colons and then remove the whole line if VPATH becomes empty -+# (actually we leave an empty line to preserve line numbers). -+if test "x$srcdir" = x.; then -+ ac_vpsub='/^[ ]*VPATH[ ]*=/{ -+s/:*\$(srcdir):*/:/ -+s/:*\${srcdir}:*/:/ -+s/:*@srcdir@:*/:/ -+s/^\([^=]*=[ ]*\):*/\1/ -+s/:*$// -+s/^[^=]*=[ ]*$// -+}' -+fi -+ -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - fi # test -n "$CONFIG_FILES" - -+# Set up the scripts for CONFIG_HEADERS section. -+# No need to generate them if there are no CONFIG_HEADERS. -+# This happens for instance with `./config.status Makefile'. -+if test -n "$CONFIG_HEADERS"; then -+cat >"$tmp/defines.awk" <<\_ACAWK || -+BEGIN { -+_ACEOF -+ -+# Transform confdefs.h into an awk script `defines.awk', embedded as -+# here-document in config.status, that substitutes the proper values into -+# config.h.in to produce config.h. -+ -+# Create a delimiter string that does not exist in confdefs.h, to ease -+# handling of long lines. -+ac_delim='%!_!# ' -+for ac_last_try in false false :; do -+ ac_t=`sed -n "/$ac_delim/p" confdefs.h` -+ if test -z "$ac_t"; then -+ break -+ elif $ac_last_try; then -+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 -+$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} -+ { (exit 1); exit 1; }; } -+ else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " -+ fi -+done -+ -+# For the awk script, D is an array of macro values keyed by name, -+# likewise P contains macro parameters if any. Preserve backslash -+# newline sequences. -+ -+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -+sed -n ' -+s/.\{148\}/&'"$ac_delim"'/g -+t rset -+:rset -+s/^[ ]*#[ ]*define[ ][ ]*/ / -+t def -+d -+:def -+s/\\$// -+t bsnl -+s/["\\]/\\&/g -+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -+D["\1"]=" \3"/p -+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -+d -+:bsnl -+s/["\\]/\\&/g -+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -+D["\1"]=" \3\\\\\\n"\\/p -+t cont -+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -+t cont -+d -+:cont -+n -+s/.\{148\}/&'"$ac_delim"'/g -+t clear -+:clear -+s/\\$// -+t bsnlc -+s/["\\]/\\&/g; s/^/"/; s/$/"/p -+d -+:bsnlc -+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -+b cont -+' <confdefs.h | sed ' -+s/'"$ac_delim"'/"\\\ -+"/g' >>$CONFIG_STATUS || ac_write_fail=1 -+ -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+ for (key in D) D_is_set[key] = 1 -+ FS = "" -+} -+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { -+ line = \$ 0 -+ split(line, arg, " ") -+ if (arg[1] == "#") { -+ defundef = arg[2] -+ mac1 = arg[3] -+ } else { -+ defundef = substr(arg[1], 2) -+ mac1 = arg[2] -+ } -+ split(mac1, mac2, "(") #) -+ macro = mac2[1] -+ prefix = substr(line, 1, index(line, defundef) - 1) -+ if (D_is_set[macro]) { -+ # Preserve the white space surrounding the "#". -+ print prefix "define", macro P[macro] D[macro] -+ next -+ } else { -+ # Replace #undef with comments. This is necessary, for example, -+ # in the case of _POSIX_SOURCE, which is predefined and required -+ # on some systems where configure will not decide to define it. -+ if (defundef == "undef") { -+ print "/*", prefix defundef, macro, "*/" -+ next -+ } -+ } -+} -+{ print } -+_ACAWK - _ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF --for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue -- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". -- case $ac_file in -- - | *:- | *:-:* ) # input from stdin -- cat >$tmp/stdin -- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- * ) ac_file_in=$ac_file.in ;; -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+ { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 -+$as_echo "$as_me: error: could not setup config headers machinery" >&2;} -+ { (exit 1); exit 1; }; } -+fi # test -n "$CONFIG_HEADERS" -+ -+ -+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -+shift -+for ac_tag -+do -+ case $ac_tag in -+ :[FHLC]) ac_mode=$ac_tag; continue;; - esac -+ case $ac_mode$ac_tag in -+ :[FHL]*:*);; -+ :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 -+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} -+ { (exit 1); exit 1; }; };; -+ :[FH]-) ac_tag=-:-;; -+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; -+ esac -+ ac_save_IFS=$IFS -+ IFS=: -+ set x $ac_tag -+ IFS=$ac_save_IFS -+ shift -+ ac_file=$1 -+ shift - -- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. -- ac_dir=`(dirname "$ac_file") 2>/dev/null || -+ case $ac_mode in -+ :L) ac_source=$1;; -+ :[FH]) -+ ac_file_inputs= -+ for ac_f -+ do -+ case $ac_f in -+ -) ac_f="$tmp/stdin";; -+ *) # Look for the file first in the build tree, then in the source tree -+ # (if the path is not absolute). The absolute path cannot be DOS-style, -+ # because $ac_f cannot contain `:'. -+ test -f "$ac_f" || -+ case $ac_f in -+ [\\/$]*) false;; -+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; -+ esac || -+ { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac -+ ac_file_inputs="$ac_file_inputs '$ac_f'" -+ done -+ -+ # Let's still pretend it is `configure' which instantiates (i.e., don't -+ # use $as_me), people would be surprised to read: -+ # /* config.h. Generated by config.status. */ -+ configure_input='Generated from '` -+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' -+ `' by configure.' -+ if test x"$ac_file" != x-; then -+ configure_input="$ac_file. $configure_input" -+ { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 -+$as_echo "$as_me: creating $ac_file" >&6;} -+ fi -+ # Neutralize special characters interpreted by sed in replacement strings. -+ case $configure_input in #( -+ *\&* | *\|* | *\\* ) -+ ac_sed_conf_input=`$as_echo "$configure_input" | -+ sed 's/[\\\\&|]/\\\\&/g'`;; #( -+ *) ac_sed_conf_input=$configure_input;; -+ esac -+ -+ case $ac_tag in -+ *:-:* | *:-) cat >"$tmp/stdin" \ -+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -+$as_echo "$as_me: error: could not create $ac_file" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+ ;; -+ esac -+ -+ ac_dir=`$as_dirname -- "$ac_file" || - $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ -- X"$ac_file" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$ac_file" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -+$as_echo X"$ac_file" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ { as_dir="$ac_dir" -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || - $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -+$as_echo X"$as_dir" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break - done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } -- - ac_builddir=. - --if test "$ac_dir" != .; then -- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - - case $srcdir in -- .) # No --srcdir option. We are building in place. -+ .) # We are building in place. - ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; - esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; --esac - -+ case $ac_mode in -+ :F) -+ # -+ # CONFIG_FILE -+ # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; -- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; -+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac -+ ac_MKDIR_P=$MKDIR_P -+ case $MKDIR_P in -+ [\\/$]* | ?:[\\/]* ) ;; -+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; -+ esac -+_ACEOF - -- # Let's still pretend it is `configure' which instantiates (i.e., don't -- # use $as_me), people would be surprised to read: -- # /* config.h. Generated by config.status. */ -- if test x"$ac_file" = x-; then -- configure_input= -- else -- configure_input="$ac_file. " -- fi -- configure_input=$configure_input"Generated from `echo $ac_file_in | -- sed 's,.*/,,'` by configure." -- -- # First look for the input files in the build tree, otherwise in the -- # src tree. -- ac_file_inputs=`IFS=: -- for f in $ac_file_in; do -- case $f in -- -) echo $tmp/stdin ;; -- [\\/$]*) -- # Absolute (can't be DOS-style, as IFS=:) -- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- echo "$f";; -- *) # Relative -- if test -f "$f"; then -- # Build tree -- echo "$f" -- elif test -f "$srcdir/$f"; then -- # Source tree -- echo "$srcdir/$f" -- else -- # /dev/null tree -- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- fi;; -- esac -- done` || { (exit 1); exit 1; } -- -- if test x"$ac_file" != x-; then -- { echo "$as_me:$LINENO: creating $ac_file" >&5 --echo "$as_me: creating $ac_file" >&6;} -- rm -f "$ac_file" -- fi -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+# If the template does not know about datarootdir, expand it. -+# FIXME: This hack should be removed a few years after 2.60. -+ac_datarootdir_hack=; ac_datarootdir_seen= -+ -+ac_sed_dataroot=' -+/datarootdir/ { -+ p -+ q -+} -+/@datadir@/p -+/@docdir@/p -+/@infodir@/p -+/@localedir@/p -+/@mandir@/p -+' -+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -+*datarootdir*) ac_datarootdir_seen=yes;; -+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) -+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+ ac_datarootdir_hack=' -+ s&@datadir@&$datadir&g -+ s&@docdir@&$docdir&g -+ s&@infodir@&$infodir&g -+ s&@localedir@&$localedir&g -+ s&@mandir@&$mandir&g -+ s&\\\${datarootdir}&$datarootdir&g' ;; -+esac - _ACEOF --cat >>$CONFIG_STATUS <<_ACEOF -- sed "$ac_vpsub -+ -+# Neutralize VPATH when `$srcdir' = `.'. -+# Shell code in configure.ac might set extrasub. -+# FIXME: do we really want to maintain this feature? -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+ac_sed_extra="$ac_vpsub - $extrasub - _ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - :t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b --s,@configure_input@,$configure_input,;t t --s,@srcdir@,$ac_srcdir,;t t --s,@abs_srcdir@,$ac_abs_srcdir,;t t --s,@top_srcdir@,$ac_top_srcdir,;t t --s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t --s,@builddir@,$ac_builddir,;t t --s,@abs_builddir@,$ac_abs_builddir,;t t --s,@top_builddir@,$ac_top_builddir,;t t --s,@abs_top_builddir@,$ac_abs_top_builddir,;t t --s,@INSTALL@,$ac_INSTALL,;t t --" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out -- rm -f $tmp/stdin -- if test x"$ac_file" != x-; then -- mv $tmp/out $ac_file -- else -- cat $tmp/out -- rm -f $tmp/out -- fi -- --done --_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF -- --# --# CONFIG_HEADER section. --# -+s|@configure_input@|$ac_sed_conf_input|;t t -+s&@top_builddir@&$ac_top_builddir_sub&;t t -+s&@top_build_prefix@&$ac_top_build_prefix&;t t -+s&@srcdir@&$ac_srcdir&;t t -+s&@abs_srcdir@&$ac_abs_srcdir&;t t -+s&@top_srcdir@&$ac_top_srcdir&;t t -+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -+s&@builddir@&$ac_builddir&;t t -+s&@abs_builddir@&$ac_abs_builddir&;t t -+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -+s&@INSTALL@&$ac_INSTALL&;t t -+s&@MKDIR_P@&$ac_MKDIR_P&;t t -+$ac_datarootdir_hack -+" -+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ -+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -+$as_echo "$as_me: error: could not create $ac_file" >&2;} -+ { (exit 1); exit 1; }; } - --# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where --# NAME is the cpp macro being defined and VALUE is the value it is being given. --# --# ac_d sets the value in "#define NAME VALUE" lines. --ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' --ac_dB='[ ].*$,\1#\2' --ac_dC=' ' --ac_dD=',;t' --# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". --ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' --ac_uB='$,\1#\2define\3' --ac_uC=' ' --ac_uD=',;t' -+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && -+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && -+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && -+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&5 -+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&2;} - --for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue -- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". -+ rm -f "$tmp/stdin" - case $ac_file in -- - | *:- | *:-:* ) # input from stdin -- cat >$tmp/stdin -- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- * ) ac_file_in=$ac_file.in ;; -- esac -- -- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 --echo "$as_me: creating $ac_file" >&6;} -- -- # First look for the input files in the build tree, otherwise in the -- # src tree. -- ac_file_inputs=`IFS=: -- for f in $ac_file_in; do -- case $f in -- -) echo $tmp/stdin ;; -- [\\/$]*) -- # Absolute (can't be DOS-style, as IFS=:) -- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- # Do quote $f, to prevent DOS paths from being IFS'd. -- echo "$f";; -- *) # Relative -- if test -f "$f"; then -- # Build tree -- echo "$f" -- elif test -f "$srcdir/$f"; then -- # Source tree -- echo "$srcdir/$f" -- else -- # /dev/null tree -- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -+ -) cat "$tmp/out" && rm -f "$tmp/out";; -+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; -+ esac \ -+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -+$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } -- fi;; -- esac -- done` || { (exit 1); exit 1; } -- # Remove the trailing spaces. -- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in -- --_ACEOF -- --# Transform confdefs.h into two sed scripts, `conftest.defines' and --# `conftest.undefs', that substitutes the proper values into --# config.h.in to produce config.h. The first handles `#define' --# templates, and the second `#undef' templates. --# And first: Protect against being on the right side of a sed subst in --# config.status. Protect against being in an unquoted here document --# in config.status. --rm -f conftest.defines conftest.undefs --# Using a here document instead of a string reduces the quoting nightmare. --# Putting comments in sed scripts is not portable. --# --# `end' is used to avoid that the second main sed command (meant for --# 0-ary CPP macros) applies to n-ary macro definitions. --# See the Autoconf documentation for `clear'. --cat >confdef2sed.sed <<\_ACEOF --s/[\\&,]/\\&/g --s,[\\$`],\\&,g --t clear --: clear --s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp --t end --s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp --: end --_ACEOF --# If some macros were called several times there might be several times --# the same #defines, which is useless. Nevertheless, we may not want to --# sort them, since we want the *last* AC-DEFINE to be honored. --uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines --sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs --rm -f confdef2sed.sed -- --# This sed command replaces #undef with comments. This is necessary, for --# example, in the case of _POSIX_SOURCE, which is predefined and required --# on some systems where configure will not decide to define it. --cat >>conftest.undefs <<\_ACEOF --s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, --_ACEOF -- --# Break up conftest.defines because some shells have a limit on the size --# of here documents, and old seds have small limits too (100 cmds). --echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS --echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS --echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS --echo ' :' >>$CONFIG_STATUS --rm -f conftest.tail --while grep . conftest.defines >/dev/null --do -- # Write a limited-size here document to $tmp/defines.sed. -- echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS -- # Speed up: don't consider the non `#define' lines. -- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS -- # Work around the forget-to-reset-the-flag bug. -- echo 't clr' >>$CONFIG_STATUS -- echo ': clr' >>$CONFIG_STATUS -- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS -- echo 'CEOF -- sed -f $tmp/defines.sed $tmp/in >$tmp/out -- rm -f $tmp/in -- mv $tmp/out $tmp/in --' >>$CONFIG_STATUS -- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail -- rm -f conftest.defines -- mv conftest.tail conftest.defines --done --rm -f conftest.defines --echo ' fi # grep' >>$CONFIG_STATUS --echo >>$CONFIG_STATUS -- --# Break up conftest.undefs because some shells have a limit on the size --# of here documents, and old seds have small limits too (100 cmds). --echo ' # Handle all the #undef templates' >>$CONFIG_STATUS --rm -f conftest.tail --while grep . conftest.undefs >/dev/null --do -- # Write a limited-size here document to $tmp/undefs.sed. -- echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS -- # Speed up: don't consider the non `#undef' -- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS -- # Work around the forget-to-reset-the-flag bug. -- echo 't clr' >>$CONFIG_STATUS -- echo ': clr' >>$CONFIG_STATUS -- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS -- echo 'CEOF -- sed -f $tmp/undefs.sed $tmp/in >$tmp/out -- rm -f $tmp/in -- mv $tmp/out $tmp/in --' >>$CONFIG_STATUS -- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail -- rm -f conftest.undefs -- mv conftest.tail conftest.undefs --done --rm -f conftest.undefs -- --cat >>$CONFIG_STATUS <<\_ACEOF -- # Let's still pretend it is `configure' which instantiates (i.e., don't -- # use $as_me), people would be surprised to read: -- # /* config.h. Generated by config.status. */ -- if test x"$ac_file" = x-; then -- echo "/* Generated by configure. */" >$tmp/config.h -- else -- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h -- fi -- cat $tmp/in >>$tmp/config.h -- rm -f $tmp/in -+ ;; -+ :H) -+ # -+ # CONFIG_HEADER -+ # - if test x"$ac_file" != x-; then -- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then -- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 --echo "$as_me: $ac_file is unchanged" >&6;} -+ { -+ $as_echo "/* $configure_input */" \ -+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" -+ } >"$tmp/config.h" \ -+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -+$as_echo "$as_me: error: could not create $ac_file" >&2;} -+ { (exit 1); exit 1; }; } -+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then -+ { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -+$as_echo "$as_me: $ac_file is unchanged" >&6;} - else -- ac_dir=`(dirname "$ac_file") 2>/dev/null || --$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$ac_file" : 'X\(//\)[^/]' \| \ -- X"$ac_file" : 'X\(//\)$' \| \ -- X"$ac_file" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$ac_file" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -- as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || --$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$as_dir" : 'X\(//\)[^/]' \| \ -- X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -- { (exit 1); exit 1; }; }; } -- -- rm -f $ac_file -- mv $tmp/config.h $ac_file -+ rm -f "$ac_file" -+ mv "$tmp/config.h" "$ac_file" \ -+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -+$as_echo "$as_me: error: could not create $ac_file" >&2;} -+ { (exit 1); exit 1; }; } - fi - else -- cat $tmp/config.h -- rm -f $tmp/config.h -+ $as_echo "/* $configure_input */" \ -+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ -+ || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 -+$as_echo "$as_me: error: could not create -" >&2;} -+ { (exit 1); exit 1; }; } - fi --# Compute $ac_file's index in $config_headers. -+# Compute "$ac_file"'s index in $config_headers. -+_am_arg="$ac_file" - _am_stamp_count=1 - for _am_header in $config_headers :; do - case $_am_header in -- $ac_file | $ac_file:* ) -+ $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac - done --echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || --$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X$ac_file : 'X\(//\)[^/]' \| \ -- X$ac_file : 'X\(//\)$' \| \ -- X$ac_file : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X$ac_file | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'`/stamp-h$_am_stamp_count --done --_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF -- --# --# CONFIG_COMMANDS section. --# --for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue -- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` -- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_dir=`(dirname "$ac_dest") 2>/dev/null || --$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$ac_dest" : 'X\(//\)[^/]' \| \ -- X"$ac_dest" : 'X\(//\)$' \| \ -- X"$ac_dest" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$ac_dest" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -- as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || --$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$as_dir" : 'X\(//\)[^/]' \| \ -- X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -- { (exit 1); exit 1; }; }; } -- -- ac_builddir=. -- --if test "$ac_dir" != .; then -- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -- --case $srcdir in -- .) # No --srcdir option. We are building in place. -- ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -- ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$_am_arg" : 'X\(//\)[^/]' \| \ -+ X"$_am_arg" : 'X\(//\)$' \| \ -+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -+$as_echo X"$_am_arg" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'`/stamp-h$_am_stamp_count -+ ;; - --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; --esac -+ :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 -+$as_echo "$as_me: executing $ac_file commands" >&6;} -+ ;; -+ esac - - -- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 --echo "$as_me: executing $ac_dest commands" >&6;} -- case $ac_dest in -- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do -+ case $ac_file$ac_mode in -+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. -@@ -5031,100 +5950,137 @@ - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. -- # So let's grep whole file. -- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then -- dirpart=`(dirname "$mf") 2>/dev/null || -+ # Grep'ing the whole file is not good either: AIX grep has a line -+ # limit of 2048, but all sed's we know have understand at least 4000. -+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then -+ dirpart=`$as_dirname -- "$mf" || - $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ -- X"$mf" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$mf" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ X"$mf" : 'X\(/\)' \| . 2>/dev/null || -+$as_echo X"$mf" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - else - continue - fi -- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue -- # Extract the definition of DEP_FILES from the Makefile without -- # running `make'. -- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` -+ # Extract the definition of DEPDIR, am__include, and am__quote -+ # from the Makefile without running `make'. -+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue -+ am__include=`sed -n 's/^am__include = //p' < "$mf"` -+ test -z "am__include" && continue -+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it -- U=`sed -n -e '/^U = / s///p' < "$mf"` -- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" -- # We invoke sed twice because it is the simplest approach to -- # changing $(DEPDIR) to its actual value in the expansion. -- for file in `sed -n -e ' -- /^DEP_FILES = .*\\\\$/ { -- s/^DEP_FILES = // -- :loop -- s/\\\\$// -- p -- n -- /\\\\$/ b loop -- p -- } -- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ -+ U=`sed -n 's/^U = //p' < "$mf"` -+ # Find all dependency output files, they are included files with -+ # $(DEPDIR) in their names. We invoke sed twice because it is the -+ # simplest approach to changing $(DEPDIR) to its actual value in the -+ # expansion. -+ for file in `sed -n " -+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue -- fdir=`(dirname "$file") 2>/dev/null || -+ fdir=`$as_dirname -- "$file" || - $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ -- X"$file" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$file" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p $dirpart/$fdir -- else -- as_dir=$dirpart/$fdir -+ X"$file" : 'X\(/\)' \| . 2>/dev/null || -+$as_echo X"$file" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ { as_dir=$dirpart/$fdir -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || - $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -+$as_echo X"$as_dir" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break - done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 --echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } -- - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done - ;; -+ - esac --done --_ACEOF -+done # for ac_tag - --cat >>$CONFIG_STATUS <<\_ACEOF - - { (exit 0); exit 0; } - _ACEOF - chmod +x $CONFIG_STATUS - ac_clean_files=$ac_clean_files_save - -+test $ac_write_fail = 0 || -+ { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 -+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ - - # configure is writing to config.log, and then calls config.status. - # config.status does its own redirection, appending to config.log. -@@ -5146,5 +6102,9 @@ - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } - fi -+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then -+ { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -+fi - - -diff -Naur tuneit-0.3/configure.in tuneit-0.3.patched/configure.in ---- tuneit-0.3/configure.in 2005-01-27 12:07:06.000000000 -0500 -+++ tuneit-0.3.patched/configure.in 2009-12-25 13:40:33.000000000 -0500 -@@ -7,7 +7,18 @@ - AC_PROG_INSTALL - AC_CHECK_LIB([asound], [snd_pcm_open], , [AC_MSG_ERROR([Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6])]) - AC_CHECK_LIB([fftw3f], [fftwf_plan_dft_r2c_1d], , [AC_MSG_ERROR([Couldn't find FFTW3 library. You must install it first.])]) --AC_CHECK_LIB([jack], [jack_client_new], , [AC_MSG_ERROR([Couldn't find JACK library. You must install it first.])]) -+AC_MSG_CHECKING(whether to enable JACK) -+AC_ARG_ENABLE(jack, -+ AC_HELP_STRING([--enable-jack],[turn on JACK support (default=yes)]), -+ [enable_jack=$enableval],[enable_jack=yes]) -+if test "x$enable_jack" = "xyes"; then -+ AC_MSG_RESULT(yes) -+ CFLAGS="$CFLAGS -DHAVE_JACK" -+ AC_CHECK_HEADER(jack/jack.h,,AC_MSG_ERROR([JACK headers not found.])) -+ AC_CHECK_LIB(jack, main,,AC_MSG_ERROR([JACK library not found.])) -+else -+ AC_MSG_RESULT(no) -+fi - AC_CHECK_HEADER([alsa/asoundlib.h], , [AC_MSG_ERROR([Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers])]) - AC_OUTPUT(Makefile src/Makefile) - -diff -Naur tuneit-0.3/src/Makefile.in tuneit-0.3.patched/src/Makefile.in ---- tuneit-0.3/src/Makefile.in 2005-01-27 14:37:25.000000000 -0500 -+++ tuneit-0.3.patched/src/Makefile.in 2009-12-25 13:40:33.000000000 -0500 -@@ -1,8 +1,8 @@ --# Makefile.in generated by automake 1.7.9 from Makefile.am. -+# Makefile.in generated by automake 1.10.1 from Makefile.am. - # @configure_input@ - --# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 --# Free Software Foundation, Inc. -+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - # This Makefile.in is free software; the Free Software Foundation - # gives unlimited permission to copy and/or distribute it, - # with or without modifications, as long as this notice is preserved. -@@ -14,16 +14,11 @@ - - @SET_MAKE@ - --srcdir = @srcdir@ --top_srcdir = @top_srcdir@ - VPATH = @srcdir@ - pkgdatadir = $(datadir)/@PACKAGE@ - pkglibdir = $(libdir)/@PACKAGE@ - pkgincludedir = $(includedir)/@PACKAGE@ --top_builddir = .. -- - am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd --INSTALL = @INSTALL@ - install_sh_DATA = $(install_sh) -c -m 644 - install_sh_PROGRAM = $(install_sh) -c - install_sh_SCRIPT = $(install_sh) -c -@@ -35,9 +30,38 @@ - NORMAL_UNINSTALL = : - PRE_UNINSTALL = : - POST_UNINSTALL = : -+bin_PROGRAMS = tuneit$(EXEEXT) -+subdir = src -+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -+am__aclocal_m4_deps = $(top_srcdir)/configure.in -+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ -+ $(ACLOCAL_M4) -+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -+CONFIG_HEADER = $(top_builddir)/config.h -+CONFIG_CLEAN_FILES = -+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" -+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -+PROGRAMS = $(bin_PROGRAMS) -+am_tuneit_OBJECTS = tuneit.$(OBJEXT) -+tuneit_OBJECTS = $(am_tuneit_OBJECTS) -+tuneit_LDADD = $(LDADD) -+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -+depcomp = $(SHELL) $(top_srcdir)/depcomp -+am__depfiles_maybe = depfiles -+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ -+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -+CCLD = $(CC) -+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -+SOURCES = $(tuneit_SOURCES) -+DIST_SOURCES = $(tuneit_SOURCES) -+man1dir = $(mandir)/man1 -+NROFF = nroff -+MANS = $(man_MANS) -+ETAGS = etags -+CTAGS = ctags -+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - ACLOCAL = @ACLOCAL@ --AMDEP_FALSE = @AMDEP_FALSE@ --AMDEP_TRUE = @AMDEP_TRUE@ - AMTAR = @AMTAR@ - AUTOCONF = @AUTOCONF@ - AUTOHEADER = @AUTOHEADER@ -@@ -56,6 +80,8 @@ - ECHO_T = @ECHO_T@ - EGREP = @EGREP@ - EXEEXT = @EXEEXT@ -+GREP = @GREP@ -+INSTALL = @INSTALL@ - INSTALL_DATA = @INSTALL_DATA@ - INSTALL_PROGRAM = @INSTALL_PROGRAM@ - INSTALL_SCRIPT = @INSTALL_SCRIPT@ -@@ -65,6 +91,7 @@ - LIBS = @LIBS@ - LTLIBOBJS = @LTLIBOBJS@ - MAKEINFO = @MAKEINFO@ -+MKDIR_P = @MKDIR_P@ - OBJEXT = @OBJEXT@ - PACKAGE = @PACKAGE@ - PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -@@ -77,84 +104,93 @@ - SHELL = @SHELL@ - STRIP = @STRIP@ - VERSION = @VERSION@ -+abs_builddir = @abs_builddir@ -+abs_srcdir = @abs_srcdir@ -+abs_top_builddir = @abs_top_builddir@ -+abs_top_srcdir = @abs_top_srcdir@ - ac_ct_CC = @ac_ct_CC@ --ac_ct_STRIP = @ac_ct_STRIP@ --am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ --am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ - am__include = @am__include@ - am__leading_dot = @am__leading_dot@ - am__quote = @am__quote@ -+am__tar = @am__tar@ -+am__untar = @am__untar@ - bindir = @bindir@ - build_alias = @build_alias@ -+builddir = @builddir@ - datadir = @datadir@ -+datarootdir = @datarootdir@ -+docdir = @docdir@ -+dvidir = @dvidir@ - exec_prefix = @exec_prefix@ - host_alias = @host_alias@ -+htmldir = @htmldir@ - includedir = @includedir@ - infodir = @infodir@ - install_sh = @install_sh@ - libdir = @libdir@ - libexecdir = @libexecdir@ -+localedir = @localedir@ - localstatedir = @localstatedir@ - mandir = @mandir@ -+mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -+pdfdir = @pdfdir@ - prefix = @prefix@ - program_transform_name = @program_transform_name@ -+psdir = @psdir@ - sbindir = @sbindir@ - sharedstatedir = @sharedstatedir@ -+srcdir = @srcdir@ - sysconfdir = @sysconfdir@ - target_alias = @target_alias@ --bin_PROGRAMS = tuneit -+top_build_prefix = @top_build_prefix@ -+top_builddir = @top_builddir@ -+top_srcdir = @top_srcdir@ - tuneit_SOURCES = tuneit.c tuneit.1 - man_MANS = tuneit.1 --subdir = src --ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 --mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs --CONFIG_HEADER = $(top_builddir)/config.h --CONFIG_CLEAN_FILES = --bin_PROGRAMS = tuneit$(EXEEXT) --PROGRAMS = $(bin_PROGRAMS) -- --am_tuneit_OBJECTS = tuneit.$(OBJEXT) --tuneit_OBJECTS = $(am_tuneit_OBJECTS) --tuneit_LDADD = $(LDADD) --tuneit_DEPENDENCIES = --tuneit_LDFLAGS = -- --DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) --depcomp = $(SHELL) $(top_srcdir)/depcomp --am__depfiles_maybe = depfiles --@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/tuneit.Po --COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ -- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) --CCLD = $(CC) --LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ --DIST_SOURCES = $(tuneit_SOURCES) -- --NROFF = nroff --MANS = $(man_MANS) --DIST_COMMON = $(srcdir)/Makefile.in Makefile.am --SOURCES = $(tuneit_SOURCES) -- - all: all-am - - .SUFFIXES: - .SUFFIXES: .c .o .obj --$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) -+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) -+ @for dep in $?; do \ -+ case '$(am__configure_deps)' in \ -+ *$$dep*) \ -+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ -+ && exit 0; \ -+ exit 1;; \ -+ esac; \ -+ done; \ -+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/Makefile --Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status -- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) --binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -+.PRECIOUS: Makefile -+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status -+ @case '$?' in \ -+ *config.status*) \ -+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ -+ *) \ -+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ -+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ -+ esac; -+ -+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) -+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -+ -+$(top_srcdir)/configure: $(am__configure_deps) -+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -+$(ACLOCAL_M4): $(am__aclocal_m4_deps) -+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) -- $(mkinstalldirs) $(DESTDIR)$(bindir) -+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ -- echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ -- $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \ -+ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ -+ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done - -@@ -162,18 +198,18 @@ - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ -- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ -- rm -f $(DESTDIR)$(bindir)/$$f; \ -+ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ -+ rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done - - clean-binPROGRAMS: - -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) - tuneit$(EXEEXT): $(tuneit_OBJECTS) $(tuneit_DEPENDENCIES) - @rm -f tuneit$(EXEEXT) -- $(LINK) $(tuneit_LDFLAGS) $(tuneit_OBJECTS) $(tuneit_LDADD) $(LIBS) -+ $(LINK) $(tuneit_OBJECTS) $(tuneit_LDADD) $(LIBS) - - mostlyclean-compile: -- -rm -f *.$(OBJEXT) core *.core -+ -rm -f *.$(OBJEXT) - - distclean-compile: - -rm -f *.tab.c -@@ -181,32 +217,21 @@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tuneit.Po@am__quote@ - - .c.o: --@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ --@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ --@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ --@am__fastdepCC_TRUE@ fi -+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ --@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ --@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< -+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -+@am__fastdepCC_FALSE@ $(COMPILE) -c $< - - .c.obj: --@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ --@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ --@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ --@am__fastdepCC_TRUE@ fi -+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ --@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ --@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` --uninstall-info-am: -- --man1dir = $(mandir)/man1 -+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - install-man1: $(man1_MANS) $(man_MANS) - @$(NORMAL_INSTALL) -- $(mkinstalldirs) $(DESTDIR)$(man1dir) -+ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ -@@ -225,8 +250,8 @@ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ -- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ -- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ -+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ -+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ - done - uninstall-man1: - @$(NORMAL_UNINSTALL) -@@ -246,26 +271,19 @@ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ -- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ -- rm -f $(DESTDIR)$(man1dir)/$$inst; \ -+ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ -+ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ - done - --ETAGS = etags --ETAGSFLAGS = -- --CTAGS = ctags --CTAGSFLAGS = -- --tags: TAGS -- - ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -+ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -+tags: TAGS - - TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) -@@ -275,23 +293,23 @@ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -- test -z "$(ETAGS_ARGS)$$tags$$unique" \ -- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -- $$tags $$unique -- -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ -+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ -+ test -n "$$unique" || unique=$$empty_fix; \ -+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -+ $$tags $$unique; \ -+ fi - ctags: CTAGS - CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ -- here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique -@@ -303,28 +321,23 @@ - - distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags --DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -- --top_distdir = .. --distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - - distdir: $(DISTFILES) -- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ -- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ -- list='$(DISTFILES)'; for file in $$list; do \ -- case $$file in \ -- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ -- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ -- esac; \ -+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ list='$(DISTFILES)'; \ -+ dist_files=`for file in $$list; do echo $$file; done | \ -+ sed -e "s|^$$srcdirstrip/||;t" \ -+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ -+ case $$dist_files in \ -+ */*) $(MKDIR_P) `echo "$$dist_files" | \ -+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ -+ sort -u` ;; \ -+ esac; \ -+ for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ -- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ -- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ -- dir="/$$dir"; \ -- $(mkinstalldirs) "$(distdir)$$dir"; \ -- else \ -- dir=''; \ -- fi; \ - if test -d $$d/$$file; then \ -+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ -@@ -338,9 +351,10 @@ - check-am: all-am - check: check-am - all-am: Makefile $(PROGRAMS) $(MANS) -- - installdirs: -- $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) -+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ -+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ -+ done - install: install-am - install-exec: install-exec-am - install-data: install-data-am -@@ -360,7 +374,7 @@ - clean-generic: - - distclean-generic: -- -rm -f $(CONFIG_CLEAN_FILES) -+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - - maintainer-clean-generic: - @echo "This command is intended for maintainers to use" -@@ -379,18 +393,28 @@ - - dvi-am: - -+html: html-am -+ - info: info-am - - info-am: - - install-data-am: install-man - -+install-dvi: install-dvi-am -+ - install-exec-am: install-binPROGRAMS - -+install-html: install-html-am -+ - install-info: install-info-am - - install-man: install-man1 - -+install-pdf: install-pdf-am -+ -+install-ps: install-ps-am -+ - installcheck-am: - - maintainer-clean: maintainer-clean-am -@@ -410,20 +434,24 @@ - - ps-am: - --uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man -+uninstall-am: uninstall-binPROGRAMS uninstall-man - - uninstall-man: uninstall-man1 - -+.MAKE: install-am install-strip -+ - .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic ctags distclean distclean-compile \ -- distclean-generic distclean-tags distdir dvi dvi-am info \ -- info-am install install-am install-binPROGRAMS install-data \ -- install-data-am install-exec install-exec-am install-info \ -- install-info-am install-man install-man1 install-strip \ -- installcheck installcheck-am installdirs maintainer-clean \ -- maintainer-clean-generic mostlyclean mostlyclean-compile \ -- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ -- uninstall-am uninstall-binPROGRAMS uninstall-info-am \ -+ distclean-generic distclean-tags distdir dvi dvi-am html \ -+ html-am info info-am install install-am install-binPROGRAMS \ -+ install-data install-data-am install-dvi install-dvi-am \ -+ install-exec install-exec-am install-html install-html-am \ -+ install-info install-info-am install-man install-man1 \ -+ install-pdf install-pdf-am install-ps install-ps-am \ -+ install-strip installcheck installcheck-am installdirs \ -+ maintainer-clean maintainer-clean-generic mostlyclean \ -+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \ -+ tags uninstall uninstall-am uninstall-binPROGRAMS \ - uninstall-man uninstall-man1 - - # Tell versions [3.59,3.63) of GNU make to not export all variables. -diff -Naur tuneit-0.3/src/tuneit.c tuneit-0.3.patched/src/tuneit.c ---- tuneit-0.3/src/tuneit.c 2005-01-27 13:59:25.000000000 -0500 -+++ tuneit-0.3.patched/src/tuneit.c 2009-12-25 13:41:36.000000000 -0500 -@@ -443,6 +443,7 @@ - alsaInit, alsaListPorts, alsaOpen, alsaRun, alsaClose, alsaFree - }; - -+#ifdef HAVE_JACK - #include <jack/jack.h> - #include <jack/ringbuffer.h> - -@@ -577,6 +578,7 @@ - static const AudioInterface jackInterface = { - jackInit, jackListPorts, jackOpen, jackRun, jackClose, jackFree - }; -+#endif - - int main(int argc, char *argv[]) - { -@@ -596,7 +598,12 @@ - listAndExit = 1; - break; - case 'j': -+#ifdef HAVE_JACK - audio = &jackInterface; -+#else -+ fprintf(stderr, "%s: This binary was built without JACK support\n", argv[0]); -+ exit(EXIT_FAILURE); -+#endif - break; - case 'l': - latency = atoi(optarg); -@@ -612,7 +619,9 @@ - fprintf(stderr, "Valid options:\n"); - fprintf(stderr, "\t-f\t\tUse the more CPU intensive FFT based algorithm\n"); - fprintf(stderr, "\t-i\t\tList available input ports and exit\n"); -+#ifdef HAVE_JACK - fprintf(stderr, "\t-j\t\tUse JACK as the audio transport system\n"); -+#endif - fprintf(stderr, "\t-l LATENCY\tMeasurement window size in 1/N seconds (default is 10)\n"); - fprintf(stderr, "\t-r RATE\t\tSet sample rate (default is 48000)\n"); - fprintf(stderr, "\t-t HERTZ\tTune the A note of the scale (default is 440.0)\n"); diff --git a/audio/tuneit/slack-desc b/audio/tuneit/slack-desc deleted file mode 100644 index d3e8eed4de..0000000000 --- a/audio/tuneit/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -tuneit: tuneit (A simple command-line instrument tuner) -tuneit: -tuneit: Tune-it uses two different algorithms for pitch detection. By default, -tuneit: a simple and fast Schmitt Trigger based algorithm is used to detect -tuneit: the fundamental frequency of an instrument. For better and more -tuneit: reliable results, there is an alternative FFT based algorithm which -tuneit: is much more CPU intensive. -tuneit: -tuneit: -tuneit: -tuneit: diff --git a/audio/tuneit/tuneit.SlackBuild b/audio/tuneit/tuneit.SlackBuild deleted file mode 100644 index e4a188c0ad..0000000000 --- a/audio/tuneit/tuneit.SlackBuild +++ /dev/null @@ -1,89 +0,0 @@ -#!/bin/sh - -# Slackware build script for <tuneit> - -# Written by B. Watson (yalhcru@gmail.com) - -PRGNAM=tuneit -VERSION=${VERSION:-0.3} -BUILD=${BUILD:-1} -TAG=${TAG:-_SBo} - -# Automatically determine the architecture we're building on: -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) export ARCH=i486 ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$( uname -m ) ;; - esac -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp/SBo} -PKG=$TMP/package-$PRGNAM -OUTPUT=${OUTPUT:-/tmp} - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -set -e - -rm -rf $PKG -mkdir -p $TMP $PKG $OUTPUT -cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.gz -cd $PRGNAM-$VERSION -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -# Allow JACK to be optional instead of required (since the app is still -# useful when using ALSA only) -patch -p1 < $CWD/jack_optional.diff - -# Included man page was unfinished -patch -p1 < $CWD/fix_manpage.diff - -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --enable-jack=${USE_JACK:-yes} \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc \ - --localstatedir=/var \ - --mandir=/usr/man \ - --build=$ARCH-slackware-linux - -make -make install-strip DESTDIR=$PKG - -gzip -9 $PKG/usr/man/man?/*.? - -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a \ - AUTHORS COPYING NEWS README \ - $PKG/usr/doc/$PRGNAM-$VERSION -cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/audio/tuneit/tuneit.info b/audio/tuneit/tuneit.info deleted file mode 100644 index c0a4b9701c..0000000000 --- a/audio/tuneit/tuneit.info +++ /dev/null @@ -1,10 +0,0 @@ -PRGNAM="tuneit" -VERSION="0.3" -HOMEPAGE="http://delysid.org/tuneit.html" -DOWNLOAD="http://delysid.org/tuneit-0.3.tar.gz" -MD5SUM="b22dcdc92982bcf56c4ae85d6b8e9b3b" -DOWNLOAD_x86_64="" -MD5SUM_x86_64="" -MAINTAINER="B. Watson" -EMAIL="yalhcru@gmail.com" -APPROVED="rworkman" |