7 files changed, 0 insertions, 255 deletions
diff --git a/audio/SlimServer/README b/audio/SlimServer/README
deleted file mode 100644
index eee38865db..0000000000
--- a/audio/SlimServer/README
+++ /dev/null
@@ -1,33 +0,0 @@
-SlimServer (network music player)
-
-Slim Devices is a powerful and free Open Source application that will
-power any Squeezebox or Transporter but also any software MP3 player 
-on your network.
-
-You will need to create a "slimserver" user on the system prior to
-installing this package - if the user is not present, then the 
-post-install script will print and error and exit.
-
-If you want SlimServer to start at boot, you will need to make the 
-/etc/rc.d/rc.slimserver file executable and add the following to 
-/etc/rc.d/rc.local:
- if [ -x /etc/rc.d/rc.slimserver ]; then
-    /etc/rc.d/rc.slimserver start
- fi
-
-To setup your SlimServer, open your web browser on the system you installed
-SlimServer on and go to http://localhost:9000 to access the web interface.
-To tell SlimServer where your music is stored, click the "Server Settings"
-link on the left.  You will find a "Music Folder" section to enter the path.
-
-By default, SlimServer will let anyone connect and stream music.  You may
-want to check out the Security section and setup a username and password.
-
-You have to register your player with SlimServer before you can start
-playing music.  To do that, open the URL http://localhost:9000/stream.mp3
-in your music player.  After that you can control everything via the web
-interface.  You can down sample the bit rate in the player specific audio
-settings.
-
-For more setup info check out the Help section at the bottom of the left
-hand panel.  I'll leave the rest for you to explore on your own.  Enjoy!
diff --git a/audio/SlimServer/SlimServer.SlackBuild b/audio/SlimServer/SlimServer.SlackBuild
deleted file mode 100644
index 8011e4812b..0000000000
--- a/audio/SlimServer/SlimServer.SlackBuild
+++ /dev/null
@@ -1,88 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for SlimServer
-
-# Copyright 2007  Brian Reichert <rignes@pobox.com>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Modified by Robby Workman <rworkman@slackbuilds.org>
-
-PRGNAM=SlimServer
-VERSION=6.5.4
-ARCH=${ARCH:-noarch}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-mkdir $PRGNAM-$VERSION
-cd $PRGNAM-$VERSION
-tar xvf $CWD/${PRGNAM}_v${VERSION}.tar.gz
-chown -R root:root .
-chmod -R u+w,go+r-w,a-s .
-
-mkdir -p $PKG/opt/slimserver/playlists
-mkdir -p $PKG/var/cache/slimserver
-
-cp -a ${PRGNAM}_v${VERSION}/* $PKG/opt/slimserver
-
-# Install logrotate script
-mkdir -p $PKG/etc/logrotate.d
-cat $CWD/logrotate.slimserver > $PKG/etc/logrotate.d/slimserver
-
-# Install init script
-mkdir -p $PKG/etc/rc.d
-cat $CWD/rc.slimserver > $PKG/etc/rc.d/rc.slimserver.new
-
-# Install an empty config file; it will only be left on the system
-# if one doesn't already exist.
-cat << EOF > $PKG/etc/slimserver.conf.new
-# This is the config file for SlimServer.
-# It is intentionally left empty by default.
-EOF
-
-# Remove a few things that obviously don't pertain to Slackware
-( cd $PKG/opt/slimserver
-  rm -rf Bin/darwin
-  rm -rf Bin/powerpc-hardhat-linux
-  rm -rf CPAN/arch/5.8/darwin-thread-multi-2level
-) 
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cd $PKG/opt/slimserver
-mv Changelog*.html Installation.txt License.txt revision.txt \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/audio/SlimServer/SlimServer.info b/audio/SlimServer/SlimServer.info
deleted file mode 100644
index 91a243d482..0000000000
--- a/audio/SlimServer/SlimServer.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="SlimServer"
-VERSION="6.5.4"
-HOMEPAGE="http://www.slimdevices.com"
-DOWNLOAD="http://www.slimdevices.com/downloads/SlimServer_v6.5.4/SlimServer_v6.5.4.tar.gz"
-MD5SUM="d51282b251ae5e0c3d2352597801b09b"
-MAINTAINER="Brian Reichert"
-EMAIL="rignes@pobox.com"
-APPROVED="rworkman"
diff --git a/audio/SlimServer/doinst.sh b/audio/SlimServer/doinst.sh
deleted file mode 100644
index 0af3004881..0000000000
--- a/audio/SlimServer/doinst.sh
+++ /dev/null
@@ -1,48 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on rc.slimserver.new:
-if [ -e etc/rc.d/rc.slimserver ]; then
-  cp -a etc/rc.d/rc.slimserver etc/rc.d/rc.slimserver.new.incoming
-  cat etc/rc.d/rc.slimserver.new > etc/rc.d/rc.slimserver.new.incoming
-  mv etc/rc.d/rc.slimserver.new.incoming etc/rc.d/rc.slimserver.new
-fi
-
-config etc/rc.d/rc.slimserver.new
-
-# Create a log file - this won't be removed when the package is uninstalled
-# (this is as it should be)
-touch var/log/slimserver.log
-
-# If a slimserver.conf file exists, there's no need to install the empty one
-# with a .new suffix
-if [ -e etc/slimserver.conf ]; then
-  rm -f etc/slimserver.conf.new
-else
-  mv etc/slimserver.conf.new etc/slimserver.conf
-fi
-
-# If there's no slimserver user, then bail out now.
-if ! grep -q ^slimserver etc/passwd ; then 
-  echo
-  echo "There is no 'slimserver' user present."
-  echo "Add the user and then reinstall the SlimServer package."
-  echo "Exiting..."
-  exit 1
-fi
-
-chroot . /bin/chown slimserver:users /etc/slimserver.conf \
-  /var/log/slimserver.log /var/cache/slimserver
-chroot . /bin/chown -R slimserver:users /opt/slimserver
-
-
diff --git a/audio/SlimServer/logrotate.slimserver b/audio/SlimServer/logrotate.slimserver
deleted file mode 100644
index 3cfa59bbbd..0000000000
--- a/audio/SlimServer/logrotate.slimserver
+++ /dev/null
@@ -1,14 +0,0 @@
-/var/log/slimserver.log {
-	size 5M
-	compress
-	create 0644 slimserver users
-	missingok
-	prerotate
-	        /etc/rc.d/rc.slimserver stop
-	endscript
-	
-	postrotate
-	        /etc/rc.d/rc.slimserver start
-	endscript
-}
-
diff --git a/audio/SlimServer/rc.slimserver b/audio/SlimServer/rc.slimserver
deleted file mode 100644
index 9148e2a47f..0000000000
--- a/audio/SlimServer/rc.slimserver
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.slimserver
-#
-
-# Edit this to suit your setup
-SLIMSERVER_USER="slimserver"
-SLIMSERVER_HOME="/opt/slimserver"
-SLIMSERVER_CFG="/etc/slimserver.conf"
-SLIMSERVER_LOG="/var/log/slimserver.log"
-SLIMSERVER_CACHE="/var/cache/slimserver"
-SLIMSERVER_PLAYLISTS="/opt/slimserver/playlists"
-SLIMSERVER_ARGS="--daemon --cachedir=$SLIMSERVER_CACHE \
-                 --playlistdir=$SLIMSERVER_PLAYLISTS \
-                 --prefsfile=$SLIMSERVER_CFG \
-                 --logfile=$SLIMSERVER_LOG"
-SLIMSERVER_BIN="$SLIMSERVER_HOME/slimserver.pl"
-
-
-slimserver_start() {
-  if [ -x $SLIMSERVER_BIN -a -r $SLIMSERVER_CFG ]; then
-    echo "Starting Slimserver..."
-    $SLIMSERVER_BIN --user $SLIMSERVER_USER $SLIMSERVER_ARGS
-  fi
-}
-
-slimserver_stop() {
-  echo "Stopping Slimserver..."
-  killall slimserver.pl
-}
-
-slimserver_restart() {
-  slimserver_stop
-  sleep 2
-  slimserver_start
-}
-
-
-case "$1" in
-'start')
-  slimserver_start
-  ;;
-'stop')
-  slimserver_stop
-  ;;
-'restart')
-  slimserver_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
-
diff --git a/audio/SlimServer/slack-desc b/audio/SlimServer/slack-desc
deleted file mode 100644
index e8f9897218..0000000000
--- a/audio/SlimServer/slack-desc
+++ /dev/null
@@ -1,12 +0,0 @@
-          |-----handy-ruler------------------------------------------------------|
-SlimServer: SlimServer (network music player)
-SlimServer:
-SlimServer: Slim Devices introduces SlimServer 6.5.2, a powerful and free Open
-SlimServer: Source software. Not only will it power any Squeezebox or Transporter,
-SlimServer: but also any software MP3 player on your network. SlimServer 6.5.2
-SlimServer: runs on Windows, Mac, Linux, BSD and Solaris. 
-SlimServer: 
-SlimServer: 
-SlimServer: 
-SlimServer: Homepage: http://www.slimdevices.com
-SlimServer: