9 files changed, 354 insertions, 0 deletions
diff --git a/system/nut/README b/system/nut/README
new file mode 100644
index 0000000000..2d5a3b11d1
--- /dev/null
+++ b/system/nut/README
@@ -0,0 +1,8 @@
+The Network UPS Tools is a collection of programs which provide a common 
+interface for monitoring and administering UPS hardware. It uses a 
+layered apporoach to connect all the components.  Drivers are provided 
+for a wide assortment of equipment. The primary goal of the NUT project 
+is to provide reliable monitoring of UPS hardware and ensure safe 
+shutdowns of the systems which are connected.
+
+See README.SLACKWARE for configuration hints.
diff --git a/system/nut/README.SLACKWARE b/system/nut/README.SLACKWARE
new file mode 100644
index 0000000000..a73275956c
--- /dev/null
+++ b/system/nut/README.SLACKWARE
@@ -0,0 +1,43 @@
+README.SLACKWARE
+Written by V'yacheslav Stetskevych <slava18 dont_spam_me gmail com>
+
+In order to configure Network UPS tools on Slackware you need to rename
+or make copies of the sample config files in /etc/nut and edit them
+to suit your needs.  See documentation in /usr/doc/nut-* for reference.
+As you make your new config files, don't forget to secure them:
+	chown root:nut /etc/nut/*.conf /etc/nut/*.users
+	chmod 640 /etc/nut/*.conf /etc/nut/*.users
+
+If you are using a serial-connected UPS, be sure to add the nut user to
+the 'dialout' group:
+	usermod -a -G dialout nut
+
+A startup script /etc/rc.d/rc.ups is provided with this build.
+You can add these lines to /etc/rc.d/rc.local to launch it on system start:
+	if [ -x /etc/rc.d/rc.ups ]; then
+		/etc/rc.d/rc.ups start
+	fi
+
+If you have more than one box sitting on the same UPS, you should only use
+'start' on the one box that is connected to the device using a signal cable.
+On the other boxes, start rc.ups with the 'start_upsmon' parameter to only
+monitor the power status (client mode). Configure access permissions on the
+server box accordingly.
+
+If you wish for your UPS to turn off it's power during an extended power outage
+in order not to drain it's battery completely, you should make two simple edits
+to the Slackware shutdown script /etc/rc.d/rc.6 near the end of it.
+These are only needed on the server box, one that is connected to the UPS:
+1) Insert after the rootfs has been remounted read-only:
+	if [ -x /usr/libexec/nut/nut_restart_udev ]; then
+		. /usr/libexec/nut/nut_restart_udev
+	fi
+2) Insert after the genpowerd block and before the actual halt:
+	if [ -x /usr/libexec/nut/nut_kill_inverter ]; then
+		. /usr/libexec/nut/nut_kill_inverter
+	fi
+
+Don't forget to set your motherboard BIOS to automatically turn the machine on
+when the power comes back.
+
+Have fun!
diff --git a/system/nut/doinst.sh b/system/nut/doinst.sh
new file mode 100644
index 0000000000..ea64d25add
--- /dev/null
+++ b/system/nut/doinst.sh
@@ -0,0 +1,21 @@
+config() {
+	NEW="$1"
+	OLD="$(dirname $NEW)/$(basename $NEW .new)"
+	# If there's no config file by that name, mv it over:
+	if [ ! -r $OLD ]; then
+		mv $NEW $OLD
+	elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+		# toss the redundant copy
+		rm $NEW
+	fi
+	# Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.ups.new:
+if [ -e etc/rc.d/rc.ups ]; then
+	cp -a etc/rc.d/rc.ups etc/rc.d/rc.ups.new.incoming
+	cat etc/rc.d/rc.ups.new > etc/rc.d/rc.ups.new.incoming
+	mv etc/rc.d/rc.ups.new.incoming etc/rc.d/rc.ups.new
+fi
+
+config etc/rc.d/rc.ups.new
diff --git a/system/nut/nut.SlackBuild b/system/nut/nut.SlackBuild
new file mode 100644
index 0000000000..a6ed5b9952
--- /dev/null
+++ b/system/nut/nut.SlackBuild
@@ -0,0 +1,153 @@
+#!/bin/sh
+
+# Slackware build script for nut (Network UPS Tools)
+
+# Copyright 2010 V'yacheslav Stetskevych <slava18 dont_spam_me gmail com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=nut
+VERSION=${VERSION:-2.4.3}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+NUTUSER=${NUTUSER:-nut}
+NUTGROUP=${NUTGROUP:-nut}
+
+# The user and group accounts have to be created manually.
+# For slackbuilds.org, assigned nut uid/gid are 218/218.
+# See http://slackbuilds.org/uid_gid.txt
+if ! grep -q ^$NUTGROUP: /etc/group; then
+	echo "  You must have a \"$NUTGROUP\" group to run this script."
+	echo "    # groupadd -g 218 $NUTGROUP"
+	exit 1
+elif ! grep -q ^$NUTUSER: /etc/passwd; then
+	echo "  You must have a \"$NUTUSER\" user to run this script."
+	echo "    # useradd -u 218 -g $NUTGROUP -s /bin/false $NUTUSER"
+	exit 1
+fi
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/$PRGNAM \
+  --localstatedir=/var \
+  --datadir=/usr/share/nut \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux \
+  --enable-strip \
+  --with-dev \
+  --with-serial \
+  --with-usb \
+  --with-hal \
+  --with-snmp \
+  --with-neon \
+  --with-wrap \
+  --with-ipv6 \
+  --with-cgi\
+  --with-cgipath=/var/www/cgi-bin/nut \
+  --with-htmlpath=/var/www/htdocs/ups \
+  --with-drvpath=/usr/libexec/nut \
+  --with-statepath=/var/run/nut \
+  --with-pidpath=/var/run/nut \
+  --with-altpidpath=/var/run/nut \
+  --with-user=nut \
+  --with-group=nut
+make
+make install DESTDIR=$PKG
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# Install the bash_completion script
+install -d $PKG/etc/bash_completion.d
+install -m 755 scripts/misc/nut.bash_completion $PKG/etc/bash_completion.d/nut
+
+# Install the startup script
+install -d $PKG/etc/rc.d
+install -m 755 $CWD/rc.ups $PKG/etc/rc.d/rc.ups.new
+
+# Create the state and run dirs
+install -d -o root -g $NUTGROUP -m 770 $PKG/var/state/ups
+install -d -o $NUTUSER -g $NUTGROUP -m 770 $PKG/var/run/nut
+
+# Install shutdown helper files
+install -m 755 $CWD/nut_restart_udev $CWD/nut_kill_inverter $PKG/usr/libexec/nut
+
+# Install documentation
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -ar docs \
+  AUTHORS COPYING ChangeLog INSTALL MAINTAINERS NEWS README UPGRADING \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+rm $PKG/usr/doc/$PRGNAM-$VERSION/docs/Makefile*
+cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/nut/nut.info b/system/nut/nut.info
new file mode 100644
index 0000000000..88be96b964
--- /dev/null
+++ b/system/nut/nut.info
@@ -0,0 +1,10 @@
+PRGNAM="nut"
+VERSION="2.4.3"
+HOMEPAGE="http://www.networkupstools.org/"
+DOWNLOAD="http://www.networkupstools.org/source/2.4/nut-2.4.3.tar.gz"
+MD5SUM="6f893b61b07915e7a139324fa3f79121"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="V'yacheslav Stetskevych"
+EMAIL="slava18@gmail.com"
+APPROVED="rworkman"
diff --git a/system/nut/nut_kill_inverter b/system/nut/nut_kill_inverter
new file mode 100644
index 0000000000..251a047df7
--- /dev/null
+++ b/system/nut/nut_kill_inverter
@@ -0,0 +1,15 @@
+#!/bin/sh
+# This file is part of Network UPS Tools build for Slackware Linux.
+# It should be sourced in /etc/rc.d/rc.0 as part of the poweroff sequence.
+# Here, we signal the UPS to shut off the power.
+# Reference: http://www.mail-archive.com/nut-upsdev@lists.alioth.debian.org/msg01099.html
+# To be sourced after the genpowerd block and before the actual halt.
+
+if [ -f /etc/killpower ]; then
+	echo "----------------------------------------Shutting down UPS power!"
+	/etc/rc.d/rc.ups shutdown
+	sleep 40
+	echo "The UPS was not shut off properly, or the power came back in the"
+	echo "middle of the shutdown process, or USB communication failed."
+	sleep 10
+fi
diff --git a/system/nut/nut_restart_udev b/system/nut/nut_restart_udev
new file mode 100644
index 0000000000..d289c0f87a
--- /dev/null
+++ b/system/nut/nut_restart_udev
@@ -0,0 +1,12 @@
+#!/bin/sh
+# This file is part of Network UPS Tools build for Slackware Linux.
+# It should be sourced in /etc/rc.d/rc.0 as part of the poweroff sequence.
+# Here, we restart udev so that the system is able to kill off the UPS inverter.
+# Reference: http://www.mail-archive.com/nut-upsdev@lists.alioth.debian.org/msg01099.html
+# To be sourced after the rootfs has been remounted read-only.
+
+if [ -f /etc/killpower ]; then
+echo "Restarting udev to be able to shut the UPS inverter off..."
+/etc/rc.d/rc.udev start
+sleep 10
+fi
diff --git a/system/nut/rc.ups b/system/nut/rc.ups
new file mode 100644
index 0000000000..0d9f4bc769
--- /dev/null
+++ b/system/nut/rc.ups
@@ -0,0 +1,73 @@
+#!/bin/sh
+# Slackware startup script for Network UPS Tools
+# Copyright 2010 V'yacheslav Stetskevych
+
+# UPS drivers live here
+DRIVERPATH=/usr/libexec/nut
+export PATH=$DRIVERPATH:$PATH
+
+POWERDOWNFLAG=/etc/killpower
+NUTUSER=nut
+NUTGROUP=nut
+UPSDCONF=/etc/ups/upsd.conf
+UPSCONF=/etc/ups/ups.conf
+UPSMONCONF=/etc/ups/upsmon.conf
+
+# Check for existense of the nut user and group
+# For slackbuilds.org, assigned nut uid/gid are 218/218.
+# See http://slackbuilds.org/uid_gid.txt
+if ! grep -q ^$NUTGROUP: /etc/group; then
+	echo "  You must have a \"$NUTGROUP\" group to run this script."
+	echo "    # groupadd -g 218 $NUTGROUP"
+	exit 1
+elif ! grep -q ^$NUTUSER: /etc/passwd; then
+	echo "  You must have a \"$NUTUSER\" user to run this script."
+	echo "    # useradd -u 218 -g $NUTGROUP -s /bin/false $NUTUSER"
+	exit 1
+fi
+
+start_driver() {
+	upsdrvctl -u $NUTUSER start || exit 1
+}
+
+start_upsd() {
+	upsd -u $NUTUSER || exit 1
+}
+
+start_upsmon() {
+	upsmon -u $NUTUSER || exit 1
+}
+
+stop() {
+	echo "Stopping the UPS services... "
+	if pgrep upsd 2>&1 >/dev/null; then
+		upsd -c stop; fi
+	if pgrep upsmon 2>&1 >/dev/null; then
+		upsmon -c stop; fi
+	upsdrvctl stop
+}
+
+case "$1" in
+	start)	# starts everything (for a ups server box)
+		start_driver
+		start_upsd
+		start_upsmon
+		;;
+	start_upsmon) # starts upsmon only (for a ups client box)
+		start_upsmon
+		;;
+	stop) # stops all UPS-related daemons
+		stop	
+		;;
+	shutdown) # shuts down the UPS
+		echo "Killing inverter..."
+		upsdrvctl shutdown
+		;;
+	reload)
+		echo "Reloading config files..."
+		upsd -c reload
+		upsmon -c reload
+		;;
+	*)
+		echo "Usage: $0 {start|start_upsmon|stop|shutdown|reload}"
+esac
diff --git a/system/nut/slack-desc b/system/nut/slack-desc
new file mode 100644
index 0000000000..742cbb92eb
--- /dev/null
+++ b/system/nut/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+nut: nut (Network UPS Tools)
+nut:
+nut: The Network UPS Tools is a collection of programs which provide a
+nut: common interface for monitoring and administering UPS hardware.
+nut: It uses a layered apporoach to connect all the components. Drivers
+nut: are provided for a wide assortment of equipment. The primary goal of
+nut: the NUT project is to provide reliable monitoring of UPS hardware
+nut: and ensure safe shutdowns of the systems which are connected.
+nut:
+nut: Homepage: http://www.networkupstools.org
+nut: