diff options
| -rw-r--r-- | libraries/libindi-drivers/README | 15 | ||||
| -rw-r--r-- | libraries/libindi-drivers/libindi-drivers.SlackBuild | 121 | ||||
| -rw-r--r-- | libraries/libindi-drivers/libindi-drivers.info | 10 | ||||
| -rw-r--r-- | libraries/libindi-drivers/slack-desc | 19 |
4 files changed, 165 insertions, 0 deletions
diff --git a/libraries/libindi-drivers/README b/libraries/libindi-drivers/README new file mode 100644 index 0000000000..fe21a24a44 --- /dev/null +++ b/libraries/libindi-drivers/README @@ -0,0 +1,15 @@ +INDI Third Party Device Hardware Drivers + +INDI is a distributed control protocol designed to operate astronomical +instrumentation. INDI is small, flexible, easy to parse, and scalable. +It supports common DCS functions such as remote control, data +acquisition, monitoring, and a lot more. + +This script builds several third party hardware drivers. + +Notes: +1. Some of the drivers will need additional configuration of their + dependencies, e.g. gpsd for GPS devices. +2. Not all device drivers are implemented yet since their dependencies + are not yet available on Slackbuilds.org. This is a work in + progress. diff --git a/libraries/libindi-drivers/libindi-drivers.SlackBuild b/libraries/libindi-drivers/libindi-drivers.SlackBuild new file mode 100644 index 0000000000..c17a333835 --- /dev/null +++ b/libraries/libindi-drivers/libindi-drivers.SlackBuild @@ -0,0 +1,121 @@ +#!/bin/sh + +# Slackware build script for libindi + +# Copyright 2018 Edward W. Koenig, Vancouver, WA, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=libindi-drivers +SRCNAM="libindi_3rdparty_" +DRIVER=3rdparty +VERSION=${VERSION:-1.6.2} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i586 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $DRIVER +tar xvf $CWD/$SRCNAM$VERSION.tar.gz +cd $DRIVER +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +# Note: Some drivers disabled since no buildscripts exist on SBo yet. +# libqhy: SDK including firmware and drivers for QHY astronomy camaras. +# libqsi: support for Quantum Scientific Imaging CCDs & Filter Wheels driver +# libsbigudev: firmware for Santa Barbra Instruments Group line of CCDs & Filter Wheels +# libinovasdk: support for i.Nova PLx series CCD/CMOS cameras driver +# libfli: support for Finger Lakes Instruments CCD and Focuser driver +# libapogee: support for Apogee Alta (U & E) line of CCDs +# libfishcamp: support for Fishcamp Engineering's Starfish CMOS autoguider +# libdspau: support for Realtek RTL2832U chip driven receivers +# +# These libraries, some included in the 3rdparty source, will be added as I create +# the install scripts. + +export CFLAGS="$SLKCFLAGS" +export CXXFLAGS="$SLKCFLAGS" +mkdir -p build +cd build + cmake \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DWITH_QHY:OPTION=OFF \ + -DWITH_QSI:OPTION=OFF \ + -DWITH_SBIG:OPTION=OFF \ + -DWITH_INOVAPLX:OPTION=OFF \ + -DWITH_FLI:OPTION=OFF \ + -DWITH_APOGEE:OPTION=OFF \ + -DWITH_FISHCAMP:OPTION=OFF \ + -DWITH_RTLSDR:OPTION=OFF \ + -DCMAKE_BUILD_TYPE=Release .. + make + make install DESTDIR=$PKG +cd .. + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +# fixup udev rules in the wrong dir +mv $PKG/etc/udev/rules.d/99-meadedsi.rules $PKG/lib/udev/rules.d/ +rm -rf $PKG/etc + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a README $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/libraries/libindi-drivers/libindi-drivers.info b/libraries/libindi-drivers/libindi-drivers.info new file mode 100644 index 0000000000..a21ca2c146 --- /dev/null +++ b/libraries/libindi-drivers/libindi-drivers.info @@ -0,0 +1,10 @@ +PRGNAM="libindi-drivers" +VERSION="1.6.2" +HOMEPAGE="http://www.indilib.org" +DOWNLOAD="https://github.com/indilib/indi/releases/download/v1.6.2/libindi_3rdparty_1.6.2.tar.gz" +MD5SUM="189ebc46abf04889a26c4a6a5b835709" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="libindi libftdi1 gpsd" +MAINTAINER="Edward W. Koenig" +EMAIL="kingbeowulf@gmail.com" diff --git a/libraries/libindi-drivers/slack-desc b/libraries/libindi-drivers/slack-desc new file mode 100644 index 0000000000..445bdddaef --- /dev/null +++ b/libraries/libindi-drivers/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +libindi-drivers: libindi-drivers (Instrument Neutral Distributed Interface) +libindi-drivers: +libindi-drivers: INDI is a distributed control protocol designed to operate +libindi-drivers: astronomical instrumentation. This script builds the third party +libindi-drivers: drivers for instrument control and data acquisition. +libindi-drivers: +libindi-drivers: +libindi-drivers: http://www.indilib.org/ +libindi-drivers: +libindi-drivers: +libindi-drivers: |