diff options
| -rw-r--r-- | audio/tuneit/README | 17 | ||||
| -rw-r--r-- | audio/tuneit/fix_manpage.diff | 108 | ||||
| -rw-r--r-- | audio/tuneit/jack_optional.diff | 10075 | ||||
| -rw-r--r-- | audio/tuneit/slack-desc | 19 | ||||
| -rw-r--r-- | audio/tuneit/tuneit.SlackBuild | 77 | ||||
| -rw-r--r-- | audio/tuneit/tuneit.info | 10 |
6 files changed, 10306 insertions, 0 deletions
diff --git a/audio/tuneit/README b/audio/tuneit/README new file mode 100644 index 0000000000..22a3206503 --- /dev/null +++ b/audio/tuneit/README @@ -0,0 +1,17 @@ +tuneit (A simple command-line instrument tuner) + +Tune-it uses two different algorithms for pitch detection. By default, +a simple and fast Schmitt Trigger based algorithm is used to detect the +fundamental frequency of an instrument. For better and more reliable +results, there is an alternative FFT based algorithm which is much more +CPU intensive. + +As audio capture backends, ALSA and JACK are supported. By default, tuneit +will try to use the hw:0,0 ALSA device. + +This requires fftw. jack is an optional dependency, but enabled by default +in this build script. If you don't want jack support, then run the script +with USE_JACK=no in the build environment. + +Tip: Unless you're on a really slow ancient system, you probably want +to always run tuneit with the -f option. diff --git a/audio/tuneit/fix_manpage.diff b/audio/tuneit/fix_manpage.diff new file mode 100644 index 0000000000..7a7755c744 --- /dev/null +++ b/audio/tuneit/fix_manpage.diff @@ -0,0 +1,108 @@ +diff -Naur tuneit-0.3/src/tuneit.1 tuneit-0.3.patched/src/tuneit.1 +--- tuneit-0.3/src/tuneit.1 2005-01-27 14:30:50.000000000 -0500 ++++ tuneit-0.3.patched/src/tuneit.1 2009-12-25 12:47:26.000000000 -0500 +@@ -1,4 +1,4 @@ +-.TH TUNEIT 1 "January 27, 2005" ++.TH TUNEIT 1 "December 25, 2009" + .SH NAME + tuneit \- Simple command line instrument tuner + .SH SYNOPSIS +@@ -6,41 +6,72 @@ + .RI [ options ] + .I captureDevice + .SH DESCRIPTION +-\fBtuneit\fP plays Vorbis and MPEG audio files while allowing the user +-to choose a new tempo without changing the pitch. ++Tune\-It is a very simple command-line based instrument tuner for Linux. + .PP +-The tempo can be interactively controlled by pressing '+' or '-', incrementing +-and decrementing the playback tempo by 1 percent respectively. +-Use "q" to stop playback. ++It uses two different algorithms for pitch detection. By default, ++a simple and fast Schmitt Trigger based algorithm is used to detect ++the fundamental frequency of an instrument. For better and more reliable ++results, there is an alternative FFT based algorithm which is much more CPU ++intensive. ++.PP ++As audio capture backends, ALSA and JACK are supported. By default, \fBtuneit\fR ++will try to use the hw:0,0 ALSA device. ++.PP ++\fBtuneit\fR captures audio from an audio device and determines the note ++being played, including the distance in cents from the nearest note in ++standard (well\-tempered) tuning. Example display: ++.PP ++Note E ( 329.628Hz): +8 cents ( 331.106Hz) ++.PP ++The example was made by connecting an electric guitar to the sound ++card's mic input and playing the high E string (which was tuned slightly ++sharp). The first Hz value is the standard frequency of the E note, and ++the second is the actual frequency being sampled from the audio device. ++In the example, we need to tune the high E string down slightly. When it ++is correct, \fI+0 cents\fR will be displayed. ++.PP ++To exit, interrupt the program (usually control\-C). ++.PP ++If \fBtuneit\fR's output seems to jump around and never settle on a note, ++try one or more of: ++.PP ++\- Run \fBtuneit\fR with the \fB\-f\fR option. ++.PP ++\- Adjust the volume and/or tone controls of your instrument. ++.PP ++\- If your instrument has more than one pickup (such as an electric ++guitar or bass), try the other pickup. ++.PP ++\- For stringed instruments, try the center harmonic of each string ++(for guitar or bass, this would be the harmonic at the 12th fret). ++.PP ++\- For miked acoustic instruments, try a different microphone, or different ++mic placement. + .SH OPTIONS +-\fByatm\fP accepts the following options: +-.TP +-.BR -b +-Begin playing at +-.IR time , +-given as an offset from the beginning of the file +-.RB ( 0:00:00 ). ++\fBtuneit\fR accepts the following options: + .TP +-.BR -e +-Stop after +-.IR duration +-seconds of audio have been decoded. ++\-f ++Use the more CPU intensive FFT based algorithm. This is highly recommended, ++unless your system is too slow to support it. + .TP +-.BR -t +-Specify initial tempo as a floating point value, 1.0 is the default. ++\-i ++List available input ports and exit. + .TP +-.BR -q +-Inhibit usual output. ++\-j ++Use JACK as the audio transport system (default is to use ALSA). + .TP +-.B -v, --verbose +-Print more information. ++.B \-l \fILATENCY\fR ++Measurement window size in 1/N seconds (default is 10). + .TP +-.B \-h, \-\-help +-Show summary of options. ++.B \-r \fIRATE\fR ++Set sample rate (default is 48000). + .TP +-.B \-V, \-\-version +-Show version of program. ++.B \-t \fIHERTZ\fR ++Tune the A note of the scale (default is 440.0) + .SH "SEE ALSO" + .BR jackd (1), amixer (1). + .SH AUTHOR + Mario Lang <mlang@delysid.org>. ++.PP ++This manual page was written by B. Watson for the SlackBuilds.org ++project, but may be used by others. diff --git a/audio/tuneit/jack_optional.diff b/audio/tuneit/jack_optional.diff new file mode 100644 index 0000000000..77553d11d9 --- /dev/null +++ b/audio/tuneit/jack_optional.diff @@ -0,0 +1,10075 @@ +diff -Naur tuneit-0.3/Makefile.in tuneit-0.3.patched/Makefile.in +--- tuneit-0.3/Makefile.in 2005-01-27 14:35:46.000000000 -0500 ++++ tuneit-0.3.patched/Makefile.in 2009-12-25 13:40:33.000000000 -0500 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.7.9 from Makefile.am. ++# Makefile.in generated by automake 1.10.1 from Makefile.am. + # @configure_input@ + +-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +-# Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,17 +13,11 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ +- +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +-top_builddir = . +- + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +-INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,9 +29,47 @@ + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : ++subdir = . ++DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ ++ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ ++ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ ++ config.guess config.sub depcomp install-sh missing \ ++ mkinstalldirs ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ ++ configure.lineno config.status.lineno ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = config.h ++CONFIG_CLEAN_FILES = ++SOURCES = ++DIST_SOURCES = ++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ ++ html-recursive info-recursive install-data-recursive \ ++ install-dvi-recursive install-exec-recursive \ ++ install-html-recursive install-info-recursive \ ++ install-pdf-recursive install-ps-recursive install-recursive \ ++ installcheck-recursive installdirs-recursive pdf-recursive \ ++ ps-recursive uninstall-recursive ++RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ ++ distclean-recursive maintainer-clean-recursive ++ETAGS = etags ++CTAGS = ctags ++DIST_SUBDIRS = $(SUBDIRS) ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++distdir = $(PACKAGE)-$(VERSION) ++top_distdir = $(distdir) ++am__remove_distdir = \ ++ { test ! -d $(distdir) \ ++ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ ++ && rm -fr $(distdir); }; } ++DIST_ARCHIVES = $(distdir).tar.gz ++GZIP_ENV = --best ++distuninstallcheck_listfiles = find . -type f -print ++distcleancheck_listfiles = find . -type f -print + ACLOCAL = @ACLOCAL@ +-AMDEP_FALSE = @AMDEP_FALSE@ +-AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ +@@ -56,6 +88,8 @@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -65,6 +99,7 @@ + LIBS = @LIBS@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ ++MKDIR_P = @MKDIR_P@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +@@ -77,88 +112,103 @@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_STRIP = @ac_ct_STRIP@ +-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ + bindir = @bindir@ + build_alias = @build_alias@ ++builddir = @builddir@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host_alias = @host_alias@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ ++mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ + SUBDIRS = src +-subdir = . +-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = config.h +-CONFIG_CLEAN_FILES = +-DIST_SOURCES = +- +-RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ +- ps-recursive install-info-recursive uninstall-info-recursive \ +- all-recursive install-data-recursive install-exec-recursive \ +- installdirs-recursive install-recursive uninstall-recursive \ +- check-recursive installcheck-recursive +-DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure AUTHORS \ +- COPYING ChangeLog INSTALL Makefile.am NEWS aclocal.m4 \ +- config.guess config.h.in config.sub configure configure.in \ +- depcomp install-sh missing mkinstalldirs +-DIST_SUBDIRS = $(SUBDIRS) + all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + + .SUFFIXES: +- +-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ +- configure.lineno +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ++am--refresh: ++ @: ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ ++ cd $(srcdir) && $(AUTOMAKE) --gnu \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ echo ' $(SHELL) ./config.status'; \ ++ $(SHELL) ./config.status;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ ++ esac; + +-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +- cd $(srcdir) && $(AUTOCONF) + +-$(ACLOCAL_M4): configure.in ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(srcdir) && $(AUTOCONF) ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + + config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ +- $(MAKE) stamp-h1; \ ++ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + + stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +- +-$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) ++$(srcdir)/config.h.in: $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) +- touch $(srcdir)/config.h.in ++ rm -f stamp-h1 ++ touch $@ + + distclean-hdr: + -rm -f config.h stamp-h1 +-uninstall-info-am: + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -167,7 +217,13 @@ + # (which will cause the Makefiles to be regenerated when you run `make'); + # (2) otherwise, pass the desired values on the `make' command line. + $(RECURSIVE_TARGETS): +- @set fnord $$MAKEFLAGS; amf=$$2; \ ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +@@ -179,15 +235,20 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-mostlyclean-recursive clean-recursive distclean-recursive \ +-maintainer-clean-recursive: +- @set fnord $$MAKEFLAGS; amf=$$2; \ ++$(RECURSIVE_CLEAN_TARGETS): ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ +@@ -208,7 +269,7 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +@@ -219,35 +280,30 @@ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +-ETAGS = etags +-ETAGSFLAGS = +- +-CTAGS = ctags +-CTAGSFLAGS = +- +-tags: TAGS +- + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique ++tags: TAGS + + TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ +- if (etags --etags-include --version) >/dev/null 2>&1; then \ ++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ ++ empty_fix=.; \ + else \ + include_option=--include; \ ++ empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ +- test -f $$subdir/TAGS && \ ++ test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ +@@ -255,23 +311,23 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$tags$$unique" \ +- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique +- ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ +- here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -283,39 +339,25 @@ + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +- +-top_distdir = . +-distdir = $(PACKAGE)-$(VERSION) +- +-am__remove_distdir = \ +- { test ! -d $(distdir) \ +- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ +- && rm -fr $(distdir); }; } +- +-GZIP_ENV = --best +-distuninstallcheck_listfiles = find . -type f -print +-distcleancheck_listfiles = find . -type f -print + + distdir: $(DISTFILES) + $(am__remove_distdir) +- mkdir $(distdir) +- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ +- list='$(DISTFILES)'; for file in $$list; do \ +- case $$file in \ +- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ +- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ +- esac; \ ++ test -d $(distdir) || mkdir $(distdir) ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ +- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ +- dir="/$$dir"; \ +- $(mkinstalldirs) "$(distdir)$$dir"; \ +- else \ +- dir=''; \ +- fi; \ + if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -326,15 +368,19 @@ + || exit 1; \ + fi; \ + done +- list='$(SUBDIRS)'; for subdir in $$list; do \ ++ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ +- test -d $(distdir)/$$subdir \ +- || mkdir $(distdir)/$$subdir \ ++ test -d "$(distdir)/$$subdir" \ ++ || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ ++ distdir=`$(am__cd) $(distdir) && pwd`; \ ++ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$(top_distdir)" \ +- distdir=../$(distdir)/$$subdir \ ++ top_distdir="$$top_distdir" \ ++ distdir="$$distdir/$$subdir" \ ++ am__remove_distdir=: \ ++ am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -342,22 +388,55 @@ + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ +- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ ++ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) + dist-gzip: distdir +- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ++ $(am__remove_distdir) ++ ++dist-bzip2: distdir ++ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 ++ $(am__remove_distdir) ++ ++dist-lzma: distdir ++ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma ++ $(am__remove_distdir) ++ ++dist-tarZ: distdir ++ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z ++ $(am__remove_distdir) ++ ++dist-shar: distdir ++ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz ++ $(am__remove_distdir) ++ ++dist-zip: distdir ++ -rm -f $(distdir).zip ++ zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + + dist dist-all: distdir +- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + + # This target untars the dist file and tries a VPATH configuration. Then + # it guarantees that the distribution is self-contained by making another + # tarfile. + distcheck: dist +- $(am__remove_distdir) +- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ++ case '$(DIST_ARCHIVES)' in \ ++ *.tar.gz*) \ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ ++ *.tar.bz2*) \ ++ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ ++ *.tar.lzma*) \ ++ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ ++ *.tar.Z*) \ ++ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ ++ *.shar.gz*) \ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ ++ *.zip*) \ ++ unzip $(distdir).zip ;;\ ++ esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst +@@ -377,19 +456,20 @@ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ +- (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \ ++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ +- && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ +- && rm -f $(distdir).tar.gz \ ++ && $(MAKE) $(AM_MAKEFLAGS) dist \ ++ && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) +- @echo "$(distdir).tar.gz is ready for distribution" | \ +- sed 'h;s/./=/g;p;x;p;x' ++ @(echo "$(distdir) archives ready for distribution: "; \ ++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ ++ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' + distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ +@@ -413,7 +493,6 @@ + all-am: Makefile config.h + installdirs: installdirs-recursive + installdirs-am: +- + install: install-recursive + install-exec: install-exec-recursive + install-data: install-data-recursive +@@ -433,7 +512,7 @@ + clean-generic: + + distclean-generic: +- -rm -f $(CONFIG_CLEAN_FILES) ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -451,18 +530,28 @@ + + dvi-am: + ++html: html-recursive ++ + info: info-recursive + + info-am: + + install-data-am: + ++install-dvi: install-dvi-recursive ++ + install-exec-am: + ++install-html: install-html-recursive ++ + install-info: install-info-recursive + + install-man: + ++install-pdf: install-pdf-recursive ++ ++install-ps: install-ps-recursive ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -483,26 +572,25 @@ + + ps-am: + +-uninstall-am: uninstall-info-am ++uninstall-am: + +-uninstall-info: uninstall-info-recursive ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ ++ install-strip + +-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \ +- clean-generic clean-recursive ctags ctags-recursive dist \ +- dist-all dist-gzip distcheck distclean distclean-generic \ +- distclean-hdr distclean-recursive distclean-tags distcleancheck \ +- distdir distuninstallcheck dvi dvi-am dvi-recursive info \ +- info-am info-recursive install install-am install-data \ +- install-data-am install-data-recursive install-exec \ +- install-exec-am install-exec-recursive install-info \ +- install-info-am install-info-recursive install-man \ +- install-recursive install-strip installcheck installcheck-am \ +- installdirs installdirs-am installdirs-recursive \ +- maintainer-clean maintainer-clean-generic \ +- maintainer-clean-recursive mostlyclean mostlyclean-generic \ +- mostlyclean-recursive pdf pdf-am pdf-recursive ps ps-am \ +- ps-recursive tags tags-recursive uninstall uninstall-am \ +- uninstall-info-am uninstall-info-recursive uninstall-recursive ++.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ ++ all all-am am--refresh check check-am clean clean-generic \ ++ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ ++ dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \ ++ distclean-generic distclean-hdr distclean-tags distcleancheck \ ++ distdir distuninstallcheck dvi dvi-am html html-am info \ ++ info-am install install-am install-data install-data-am \ ++ install-dvi install-dvi-am install-exec install-exec-am \ ++ install-html install-html-am install-info install-info-am \ ++ install-man install-pdf install-pdf-am install-ps \ ++ install-ps-am install-strip installcheck installcheck-am \ ++ installdirs installdirs-am maintainer-clean \ ++ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ ++ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Naur tuneit-0.3/aclocal.m4 tuneit-0.3.patched/aclocal.m4 +--- tuneit-0.3/aclocal.m4 2005-01-27 14:34:43.000000000 -0500 ++++ tuneit-0.3.patched/aclocal.m4 2009-12-25 13:40:33.000000000 -0500 +@@ -1,7 +1,7 @@ +-# generated automatically by aclocal 1.7.9 -*- Autoconf -*- ++# generated automatically by aclocal 1.10.1 -*- Autoconf -*- + +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002 +-# Free Software Foundation, Inc. ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -11,332 +11,57 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +-# Do all the work for Automake. -*- Autoconf -*- +- +-# This macro actually does too much some checks are only needed if +-# your package does certain things. But this isn't really a big deal. +- +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +-# Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# serial 10 +- +-AC_PREREQ([2.54]) +- +-# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow +-# the ones we care about. +-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +- +-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +-# AM_INIT_AUTOMAKE([OPTIONS]) +-# ----------------------------------------------- +-# The call with PACKAGE and VERSION arguments is the old style +-# call (pre autoconf-2.50), which is being phased out. PACKAGE +-# and VERSION should now be passed to AC_INIT and removed from +-# the call to AM_INIT_AUTOMAKE. +-# We support both call styles for the transition. After +-# the next Automake release, Autoconf can make the AC_INIT +-# arguments mandatory, and then we can depend on a new Autoconf +-# release and drop the old call support. +-AC_DEFUN([AM_INIT_AUTOMAKE], +-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +- AC_REQUIRE([AC_PROG_INSTALL])dnl +-# test to see if srcdir already configured +-if test "`cd $srcdir && pwd`" != "`pwd`" && +- test -f $srcdir/config.status; then +- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +-fi +- +-# test whether we have cygpath +-if test -z "$CYGPATH_W"; then +- if (cygpath --version) >/dev/null 2>/dev/null; then +- CYGPATH_W='cygpath -w' +- else +- CYGPATH_W=echo +- fi +-fi +-AC_SUBST([CYGPATH_W]) +- +-# Define the identity of the package. +-dnl Distinguish between old-style and new-style calls. +-m4_ifval([$2], +-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl +- AC_SUBST([PACKAGE], [$1])dnl +- AC_SUBST([VERSION], [$2])], +-[_AM_SET_OPTIONS([$1])dnl +- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl +- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl +- +-_AM_IF_OPTION([no-define],, +-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl +- +-# Some tools Automake needs. +-AC_REQUIRE([AM_SANITY_CHECK])dnl +-AC_REQUIRE([AC_ARG_PROGRAM])dnl +-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +-AM_MISSING_PROG(AUTOCONF, autoconf) +-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +-AM_MISSING_PROG(AUTOHEADER, autoheader) +-AM_MISSING_PROG(MAKEINFO, makeinfo) +-AM_MISSING_PROG(AMTAR, tar) +-AM_PROG_INSTALL_SH +-AM_PROG_INSTALL_STRIP +-# We need awk for the "check" target. The system "awk" is bad on +-# some platforms. +-AC_REQUIRE([AC_PROG_AWK])dnl +-AC_REQUIRE([AC_PROG_MAKE_SET])dnl +-AC_REQUIRE([AM_SET_LEADING_DOT])dnl +- +-_AM_IF_OPTION([no-dependencies],, +-[AC_PROVIDE_IFELSE([AC_PROG_CC], +- [_AM_DEPENDENCIES(CC)], +- [define([AC_PROG_CC], +- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +-AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [_AM_DEPENDENCIES(CXX)], +- [define([AC_PROG_CXX], +- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +-]) +-]) +- +- +-# When config.status generates a header, we must update the stamp-h file. +-# This file resides in the same directory as the config header +-# that is generated. The stamp files are numbered to have different names. +- +-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +-# loop where config.status creates the headers, so we can generate +-# our stamp files there. +-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +-[# Compute $1's index in $config_headers. +-_am_stamp_count=1 +-for _am_header in $config_headers :; do +- case $_am_header in +- $1 | $1:* ) +- break ;; +- * ) +- _am_stamp_count=`expr $_am_stamp_count + 1` ;; +- esac +-done +-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) +- +-# Copyright 2002 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++m4_if(AC_AUTOCONF_VERSION, [2.63],, ++[m4_warning([this file was generated for autoconf 2.63. ++You have another version of autoconf. It may work, but is not guaranteed to. ++If you have problems, you may need to regenerate the build system entirely. ++To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ++# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + + # AM_AUTOMAKE_VERSION(VERSION) + # ---------------------------- + # Automake X.Y traces this macro to ensure aclocal.m4 has been + # generated from the m4 files accompanying Automake X.Y. +-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"]) ++# (This private macro should not be called outside this file.) ++AC_DEFUN([AM_AUTOMAKE_VERSION], ++[am__api_version='1.10' ++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to ++dnl require some minimum version. Point them to the right macro. ++m4_if([$1], [1.10.1], [], ++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ++]) ++ ++# _AM_AUTOCONF_VERSION(VERSION) ++# ----------------------------- ++# aclocal traces this macro to find the Autoconf version. ++# This is a private macro too. Using m4_define simplifies ++# the logic in aclocal, which can simply ignore this definition. ++m4_define([_AM_AUTOCONF_VERSION], []) + + # AM_SET_CURRENT_AUTOMAKE_VERSION + # ------------------------------- +-# Call AM_AUTOMAKE_VERSION so it can be traced. ++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. + # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. + AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +- [AM_AUTOMAKE_VERSION([1.7.9])]) +- +-# Helper functions for option handling. -*- Autoconf -*- +- +-# Copyright 2001, 2002 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# serial 2 +- +-# _AM_MANGLE_OPTION(NAME) +-# ----------------------- +-AC_DEFUN([_AM_MANGLE_OPTION], +-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) +- +-# _AM_SET_OPTION(NAME) +-# ------------------------------ +-# Set option NAME. Presently that only means defining a flag for this option. +-AC_DEFUN([_AM_SET_OPTION], +-[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) +- +-# _AM_SET_OPTIONS(OPTIONS) +-# ---------------------------------- +-# OPTIONS is a space-separated list of Automake options. +-AC_DEFUN([_AM_SET_OPTIONS], +-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++[AM_AUTOMAKE_VERSION([1.10.1])dnl ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) + +-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +-# ------------------------------------------- +-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +-AC_DEFUN([_AM_IF_OPTION], +-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++# AM_AUX_DIR_EXPAND -*- Autoconf -*- + ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # +-# Check to make sure that the build environment is sane. +-# +- +-# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# serial 3 +- +-# AM_SANITY_CHECK +-# --------------- +-AC_DEFUN([AM_SANITY_CHECK], +-[AC_MSG_CHECKING([whether build environment is sane]) +-# Just in case +-sleep 1 +-echo timestamp > conftest.file +-# Do `set' in a subshell so we don't clobber the current shell's +-# arguments. Must try -L first in case configure is actually a +-# symlink; some systems play weird games with the mod time of symlinks +-# (eg FreeBSD returns the mod time of the symlink's containing +-# directory). +-if ( +- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` +- if test "$[*]" = "X"; then +- # -L didn't work. +- set X `ls -t $srcdir/configure conftest.file` +- fi +- rm -f conftest.file +- if test "$[*]" != "X $srcdir/configure conftest.file" \ +- && test "$[*]" != "X conftest.file $srcdir/configure"; then +- +- # If neither matched, then we have a broken ls. This can happen +- # if, for instance, CONFIG_SHELL is bash and it inherits a +- # broken ls alias from the environment. This has actually +- # happened. Such a system could not be considered "sane". +- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +-alias in your environment]) +- fi +- +- test "$[2]" = conftest.file +- ) +-then +- # Ok. +- : +-else +- AC_MSG_ERROR([newly created file is older than distributed files! +-Check your system clock]) +-fi +-AC_MSG_RESULT(yes)]) +- +-# -*- Autoconf -*- +- +- +-# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# serial 3 +- +-# AM_MISSING_PROG(NAME, PROGRAM) +-# ------------------------------ +-AC_DEFUN([AM_MISSING_PROG], +-[AC_REQUIRE([AM_MISSING_HAS_RUN]) +-$1=${$1-"${am_missing_run}$2"} +-AC_SUBST($1)]) +- +- +-# AM_MISSING_HAS_RUN +-# ------------------ +-# Define MISSING if not defined so far and test if it supports --run. +-# If it does, set am_missing_run to use it, otherwise, to nothing. +-AC_DEFUN([AM_MISSING_HAS_RUN], +-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +-# Use eval to expand $SHELL +-if eval "$MISSING --run true"; then +- am_missing_run="$MISSING --run " +-else +- am_missing_run= +- AC_MSG_WARN([`missing' script is too old or missing]) +-fi +-]) +- +-# AM_AUX_DIR_EXPAND +- +-# Copyright 2001 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + + # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets + # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +@@ -376,131 +101,56 @@ + # absolute PATH. The drawback is that using absolute paths prevent a + # configured tree to be moved without reconfiguration. + +-# Rely on autoconf to set up CDPATH properly. +-AC_PREREQ([2.50]) +- +-AC_DEFUN([AM_AUX_DIR_EXPAND], [ ++AC_DEFUN([AM_AUX_DIR_EXPAND], ++[dnl Rely on autoconf to set up CDPATH properly. ++AC_PREREQ([2.50])dnl + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` + ]) + +-# AM_PROG_INSTALL_SH +-# ------------------ +-# Define $install_sh. +- +-# Copyright 2001 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# AM_CONDITIONAL -*- Autoconf -*- + +-AC_DEFUN([AM_PROG_INSTALL_SH], +-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-install_sh=${install_sh-"$am_aux_dir/install-sh"} +-AC_SUBST(install_sh)]) ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# AM_PROG_INSTALL_STRIP ++# serial 8 + +-# Copyright 2001 Free Software Foundation, Inc. ++# AM_CONDITIONAL(NAME, SHELL-CONDITION) ++# ------------------------------------- ++# Define a conditional. ++AC_DEFUN([AM_CONDITIONAL], ++[AC_PREREQ(2.52)dnl ++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE])dnl ++AC_SUBST([$1_FALSE])dnl ++_AM_SUBST_NOTMAKE([$1_TRUE])dnl ++_AM_SUBST_NOTMAKE([$1_FALSE])dnl ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= ++fi ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) + +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# One issue with vendor `install' (even GNU) is that you can't +-# specify the program used to strip binaries. This is especially +-# annoying in cross-compiling environments, where the build's strip +-# is unlikely to handle the host's binaries. +-# Fortunately install-sh will honor a STRIPPROG variable, so we +-# always use install-sh in `make install-strip', and initialize +-# STRIPPROG with the value of the STRIP variable (set by the user). +-AC_DEFUN([AM_PROG_INSTALL_STRIP], +-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +-# Installed binaries are usually stripped using `strip' when the user +-# run `make install-strip'. However `strip' might not be the right +-# tool to use in cross-compilation environments, therefore Automake +-# will honor the `STRIP' environment variable to overrule this program. +-dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +-if test "$cross_compiling" != no; then +- AC_CHECK_TOOL([STRIP], [strip], :) +-fi +-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +-AC_SUBST([INSTALL_STRIP_PROGRAM])]) +- +-# -*- Autoconf -*- +-# Copyright (C) 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# serial 1 +- +-# Check whether the underlying file-system supports filenames +-# with a leading dot. For instance MS-DOS doesn't. +-AC_DEFUN([AM_SET_LEADING_DOT], +-[rm -rf .tst 2>/dev/null +-mkdir .tst 2>/dev/null +-if test -d .tst; then +- am__leading_dot=. +-else +- am__leading_dot=_ +-fi +-rmdir .tst 2>/dev/null +-AC_SUBST([am__leading_dot])]) +- +-# serial 5 -*- Autoconf -*- +- +-# Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + ++# serial 9 + + # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be + # written in clear, in which case automake, when reading aclocal.m4, +@@ -509,7 +159,6 @@ + # CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +- + # _AM_DEPENDENCIES(NAME) + # ---------------------- + # See how the compiler implements dependency checking. +@@ -529,6 +178,7 @@ + ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +@@ -568,7 +218,9 @@ + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c +- : > sub/conftst$i.h ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +@@ -592,13 +244,19 @@ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings +- # (even with -Werror). So we grep stderr for any message +- # that says an option was ignored. +- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi +@@ -632,36 +290,27 @@ + # ------------ + AC_DEFUN([AM_DEP_TRACK], + [AC_ARG_ENABLE(dependency-tracking, +-[ --disable-dependency-tracking Speeds up one-time builds +- --enable-dependency-tracking Do not reject slow dependency extractors]) ++[ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors]) + if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + fi + AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +-AC_SUBST([AMDEPBACKSLASH]) ++AC_SUBST([AMDEPBACKSLASH])dnl ++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl + ]) + +-# Generate code to set up dependency tracking. -*- Autoconf -*- ++# Generate code to set up dependency tracking. -*- Autoconf -*- + +-# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-#serial 2 ++#serial 3 + + # _AM_OUTPUT_DEPENDENCY_COMMANDS + # ------------------------------ +@@ -674,33 +323,28 @@ + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. +- # So let's grep whole file. +- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi +- grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue +- # Extract the definition of DEP_FILES from the Makefile without +- # running `make'. +- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n -e '/^U = / s///p' < "$mf"` +- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" +- # We invoke sed twice because it is the simplest approach to +- # changing $(DEPDIR) to its actual value in the expansion. +- for file in `sed -n -e ' +- /^DEP_FILES = .*\\\\$/ { +- s/^DEP_FILES = // +- :loop +- s/\\\\$// +- p +- n +- /\\\\$/ b loop +- p +- } +- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue +@@ -726,27 +370,189 @@ + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) + ]) + +-# Check to see how 'make' treats includes. -*- Autoconf -*- ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. ++# serial 8 + +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. ++AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Do all the work for Automake. -*- Autoconf -*- ++ ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005, 2006, 2008 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 13 ++ ++# This macro actually does too much. Some checks are only needed if ++# your package does certain things. But this isn't really a big deal. ++ ++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) ++# AM_INIT_AUTOMAKE([OPTIONS]) ++# ----------------------------------------------- ++# The call with PACKAGE and VERSION arguments is the old style ++# call (pre autoconf-2.50), which is being phased out. PACKAGE ++# and VERSION should now be passed to AC_INIT and removed from ++# the call to AM_INIT_AUTOMAKE. ++# We support both call styles for the transition. After ++# the next Automake release, Autoconf can make the AC_INIT ++# arguments mandatory, and then we can depend on a new Autoconf ++# release and drop the old call support. ++AC_DEFUN([AM_INIT_AUTOMAKE], ++[AC_PREREQ([2.60])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++ fi ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++AC_SUBST([CYGPATH_W]) ++ ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. ++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, ++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++ ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) ++AM_MISSING_PROG(AUTOCONF, autoconf) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) ++AM_MISSING_PROG(AUTOHEADER, autoheader) ++AM_MISSING_PROG(MAKEINFO, makeinfo) ++AM_PROG_INSTALL_SH ++AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_MKDIR_P])dnl ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_OBJC], ++ [_AM_DEPENDENCIES(OBJC)], ++ [define([AC_PROG_OBJC], ++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ++]) ++]) ++ ++ ++# When config.status generates a header, we must update the stamp-h file. ++# This file resides in the same directory as the config header ++# that is generated. The stamp files are numbered to have different names. ++ ++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the ++# loop where config.status creates the headers, so we can generate ++# our stamp files there. ++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], ++[# Compute $1's index in $config_headers. ++_am_arg=$1 ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $_am_arg | $_am_arg:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) ++ ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_INSTALL_SH ++# ------------------ ++# Define $install_sh. ++AC_DEFUN([AM_PROG_INSTALL_SH], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} ++AC_SUBST(install_sh)]) ++ ++# Copyright (C) 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + + # serial 2 + ++# Check whether the underlying file-system supports filenames ++# with a leading dot. For instance MS-DOS doesn't. ++AC_DEFUN([AM_SET_LEADING_DOT], ++[rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) ++ ++# Check to see how 'make' treats includes. -*- Autoconf -*- ++ ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 ++ + # AM_MAKE_INCLUDE() + # ----------------- + # Check to see how make treats includes. +@@ -789,73 +595,286 @@ + rm -f confinc confmf + ]) + +-# AM_CONDITIONAL -*- Autoconf -*- ++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +-# Copyright 1997, 2000, 2001 Free Software Foundation, Inc. ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# serial 5 + +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# AM_MISSING_PROG(NAME, PROGRAM) ++# ------------------------------ ++AC_DEFUN([AM_MISSING_PROG], ++[AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) + +-# serial 5 + +-AC_PREREQ(2.52) ++# AM_MISSING_HAS_RUN ++# ------------------ ++# Define MISSING if not defined so far and test if it supports --run. ++# If it does, set am_missing_run to use it, otherwise, to nothing. ++AC_DEFUN([AM_MISSING_HAS_RUN], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([missing])dnl ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ AC_MSG_WARN([`missing' script is too old or missing]) ++fi ++]) + +-# AM_CONDITIONAL(NAME, SHELL-CONDITION) +-# ------------------------------------- +-# Define a conditional. +-AC_DEFUN([AM_CONDITIONAL], +-[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], +- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +-AC_SUBST([$1_TRUE]) +-AC_SUBST([$1_FALSE]) +-if $2; then +- $1_TRUE= +- $1_FALSE='#' ++# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_MKDIR_P ++# --------------- ++# Check for `mkdir -p'. ++AC_DEFUN([AM_PROG_MKDIR_P], ++[AC_PREREQ([2.60])dnl ++AC_REQUIRE([AC_PROG_MKDIR_P])dnl ++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, ++dnl while keeping a definition of mkdir_p for backward compatibility. ++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. ++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of ++dnl Makefile.ins that do not define MKDIR_P, so we do our own ++dnl adjustment using top_builddir (which is defined more often than ++dnl MKDIR_P). ++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl ++case $mkdir_p in ++ [[\\/$]]* | ?:[[\\/]]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac ++]) ++ ++# Helper functions for option handling. -*- Autoconf -*- ++ ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 ++ ++# _AM_MANGLE_OPTION(NAME) ++# ----------------------- ++AC_DEFUN([_AM_MANGLE_OPTION], ++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++ ++# _AM_SET_OPTION(NAME) ++# ------------------------------ ++# Set option NAME. Presently that only means defining a flag for this option. ++AC_DEFUN([_AM_SET_OPTION], ++[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) ++ ++# _AM_SET_OPTIONS(OPTIONS) ++# ---------------------------------- ++# OPTIONS is a space-separated list of Automake options. ++AC_DEFUN([_AM_SET_OPTIONS], ++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++ ++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------- ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++AC_DEFUN([_AM_IF_OPTION], ++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++ ++# Check to make sure that the build environment is sane. -*- Autoconf -*- ++ ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 4 ++ ++# AM_SANITY_CHECK ++# --------------- ++AC_DEFUN([AM_SANITY_CHECK], ++[AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$[*]" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$[*]" != "X $srcdir/configure conftest.file" \ ++ && test "$[*]" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi ++ ++ test "$[2]" = conftest.file ++ ) ++then ++ # Ok. ++ : + else +- $1_TRUE='#' +- $1_FALSE= ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) + fi +-AC_CONFIG_COMMANDS_PRE( +-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then +- AC_MSG_ERROR([conditional "$1" was never defined. +-Usually this means the macro was only invoked conditionally.]) +-fi])]) ++AC_MSG_RESULT(yes)]) + +-# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_INSTALL_STRIP ++# --------------------- ++# One issue with vendor `install' (even GNU) is that you can't ++# specify the program used to strip binaries. This is especially ++# annoying in cross-compiling environments, where the build's strip ++# is unlikely to handle the host's binaries. ++# Fortunately install-sh will honor a STRIPPROG variable, so we ++# always use install-sh in `make install-strip', and initialize ++# STRIPPROG with the value of the STRIP variable (set by the user). ++AC_DEFUN([AM_PROG_INSTALL_STRIP], ++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be `maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++ ++# Copyright (C) 2006 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. ++# _AM_SUBST_NOTMAKE(VARIABLE) ++# --------------------------- ++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. ++# This macro is traced by Automake. ++AC_DEFUN([_AM_SUBST_NOTMAKE]) + +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# Check how to create a tarball. -*- Autoconf -*- + +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-AC_PREREQ([2.52]) ++# serial 2 + +-# serial 6 ++# _AM_PROG_TAR(FORMAT) ++# -------------------- ++# Check how to create a tarball in format FORMAT. ++# FORMAT should be one of `v7', `ustar', or `pax'. ++# ++# Substitute a variable $(am__tar) that is a command ++# writing to stdout a FORMAT-tarball containing the directory ++# $tardir. ++# tardir=directory && $(am__tar) > result.tar ++# ++# Substitute a variable $(am__untar) that extract such ++# a tarball read from stdin. ++# $(am__untar) < result.tar ++AC_DEFUN([_AM_PROG_TAR], ++[# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac + +-# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break ++ ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar <conftest.tar]) ++ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir ++ ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) # _AM_PROG_TAR + +diff -Naur tuneit-0.3/configure tuneit-0.3.patched/configure +--- tuneit-0.3/configure 2005-01-27 14:35:45.000000000 -0500 ++++ tuneit-0.3.patched/configure 2009-12-25 13:40:33.000000000 -0500 +@@ -1,27 +1,84 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.59 for tuneit 0.3. ++# Generated by GNU Autoconf 2.63 for tuneit 0.3. + # + # Report bugs to <Mario Lang <mlang@delysid.org>>. + # +-# Copyright (C) 2003 Free Software Foundation, Inc. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' ++else ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' ++ else ++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in ++ *"$as_nl"*) ++ expr "X$arg" : "X\\(.*\\)$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; ++ esac; ++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' ++ fi ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' ++fi ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -31,33 +88,60 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' + + # NLS nuisances. +-for as_var in \ +- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ +- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ +- LC_TELEPHONE LC_TIME +-do +- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then +- eval $as_var=C; export $as_var +- else +- $as_unset $as_var +- fi +-done ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -65,157 +149,391 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# CDPATH. ++$as_unset CDPATH + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no + fi + ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in ++ case $as_dir in + /*) +- if ("$as_dir/$as_base" -c ' ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell bug-autoconf@gnu.org about your system, ++ echo including any error possibly output before this message. ++ echo This can help us improve future autoconf versions. ++ echo Configuration will now proceed without shell functions. ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ chmod +x "$as_me.lineno" || ++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +-esac ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file +-echo >conf$$.file +-if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links +- as_ln_s='cp -p' +- else ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null ++fi ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else ++ as_ln_s='cp -p' + fi +-elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -224,7 +542,28 @@ + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -233,39 +572,27 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH + ++exec 7<&0 </dev/null 6>&1 + + # Name of the host. + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +-exec 6>&1 +- + # + # Initializations. + # + ac_default_prefix=/usr/local ++ac_clean_files= + ac_config_libobj_dir=. ++LIBOBJS= + cross_compiling=no + subdirs= + MFLAGS= + MAKEFLAGS= + SHELL=${CONFIG_SHELL-/bin/sh} + +-# Maximum number of lines to put in a shell here document. +-# This variable seems obsolete. It should probably be removed, and +-# only ac_max_sed_lines should be used. +-: ${ac_max_here_lines=38} +- + # Identity of this package. + PACKAGE_NAME='tuneit' + PACKAGE_TARNAME='tuneit' +@@ -277,46 +604,142 @@ + # Factoring default headers for most tests. + ac_includes_default="\ + #include <stdio.h> +-#if HAVE_SYS_TYPES_H ++#ifdef HAVE_SYS_TYPES_H + # include <sys/types.h> + #endif +-#if HAVE_SYS_STAT_H ++#ifdef HAVE_SYS_STAT_H + # include <sys/stat.h> + #endif +-#if STDC_HEADERS ++#ifdef STDC_HEADERS + # include <stdlib.h> + # include <stddef.h> + #else +-# if HAVE_STDLIB_H ++# ifdef HAVE_STDLIB_H + # include <stdlib.h> + # endif + #endif +-#if HAVE_STRING_H +-# if !STDC_HEADERS && HAVE_MEMORY_H ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H + # include <memory.h> + # endif + # include <string.h> + #endif +-#if HAVE_STRINGS_H ++#ifdef HAVE_STRINGS_H + # include <strings.h> + #endif +-#if HAVE_INTTYPES_H ++#ifdef HAVE_INTTYPES_H + # include <inttypes.h> +-#else +-# if HAVE_STDINT_H +-# include <stdint.h> +-# endif + #endif +-#if HAVE_UNISTD_H ++#ifdef HAVE_STDINT_H ++# include <stdint.h> ++#endif ++#ifdef HAVE_UNISTD_H + # include <unistd.h> + #endif" + +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP LIBOBJS LTLIBOBJS' ++ac_subst_vars='LTLIBOBJS ++LIBOBJS ++EGREP ++GREP ++CPP ++am__fastdepCC_FALSE ++am__fastdepCC_TRUE ++CCDEPMODE ++AMDEPBACKSLASH ++AMDEP_FALSE ++AMDEP_TRUE ++am__quote ++am__include ++DEPDIR ++OBJEXT ++EXEEXT ++ac_ct_CC ++CPPFLAGS ++LDFLAGS ++CFLAGS ++CC ++am__untar ++am__tar ++AMTAR ++am__leading_dot ++SET_MAKE ++AWK ++mkdir_p ++MKDIR_P ++INSTALL_STRIP_PROGRAM ++STRIP ++install_sh ++MAKEINFO ++AUTOHEADER ++AUTOMAKE ++AUTOCONF ++ACLOCAL ++VERSION ++PACKAGE ++CYGPATH_W ++am__isrc ++INSTALL_DATA ++INSTALL_SCRIPT ++INSTALL_PROGRAM ++target_alias ++host_alias ++build_alias ++LIBS ++ECHO_T ++ECHO_N ++ECHO_C ++DEFS ++mandir ++localedir ++libdir ++psdir ++pdfdir ++dvidir ++htmldir ++infodir ++docdir ++oldincludedir ++includedir ++localstatedir ++sharedstatedir ++sysconfdir ++datadir ++datarootdir ++libexecdir ++sbindir ++bindir ++program_transform_name ++prefix ++exec_prefix ++PACKAGE_BUGREPORT ++PACKAGE_STRING ++PACKAGE_VERSION ++PACKAGE_TARNAME ++PACKAGE_NAME ++PATH_SEPARATOR ++SHELL' + ac_subst_files='' ++ac_user_opts=' ++enable_option_checking ++enable_dependency_tracking ++enable_jack ++' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++CPP' ++ + + # Initialize some variables set by options. + ac_init_help= + ac_init_version=false ++ac_unrecognized_opts= ++ac_unrecognized_sep= + # The variables have the same names as the options, with + # dashes changed to underlines. + cache_file=/dev/null +@@ -339,34 +762,48 @@ + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +-datadir='${prefix}/share' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' +-libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' +-infodir='${prefix}/info' +-mandir='${prefix}/man' ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' + + ac_prev= ++ac_dashdash= + for ac_option + do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then +- eval "$ac_prev=\$ac_option" ++ eval $ac_prev=\$ac_option + ac_prev= + continue + fi + +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + +- case $ac_option in ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; +@@ -388,33 +825,61 @@ + --config-cache | -C) + cache_file=config.cache ;; + +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ +- | --da=*) ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ + -disable-* | --disable-*) +- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- eval "enable_$ac_feature=no" ;; ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval enable_$ac_useropt=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; + + -enable-* | --enable-*) +- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; + esac +- eval "enable_$ac_feature='$ac_optarg'" ;; ++ eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -441,6 +906,12 @@ + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; +@@ -465,13 +936,16 @@ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ + -localstatedir | --localstatedir | --localstatedi | --localstated \ +- | --localstate | --localstat | --localsta | --localst \ +- | --locals | --local | --loca | --loc | --lo) ++ | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) +@@ -536,6 +1010,16 @@ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; +@@ -586,26 +1070,38 @@ + ac_init_version=: ;; + + -with-* | --with-*) +- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package| sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; + esac +- eval "with_$ac_package='$ac_optarg'" ;; ++ eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) +- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package | sed 's/-/_/g'` +- eval "with_$ac_package=no" ;; ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. +@@ -625,7 +1121,7 @@ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + +- -*) { echo "$as_me: error: unrecognized option: $ac_option ++ -*) { $as_echo "$as_me: error: unrecognized option: $ac_option + Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; +@@ -634,17 +1130,16 @@ + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 ++ { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` +- eval "$ac_envvar='$ac_optarg'" ++ eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. +- echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && +- echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + +@@ -653,31 +1148,39 @@ + + if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` +- { echo "$as_me: error: missing argument to $ac_option" >&2 ++ { $as_echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } + fi + +-# Be sure to have absolute paths. +-for ac_var in exec_prefix prefix +-do +- eval ac_val=$`echo $ac_var` +- case $ac_val in +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++if test -n "$ac_unrecognized_opts"; then ++ case $enable_option_checking in ++ no) ;; ++ fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 ++ { (exit 1); exit 1; }; } ;; ++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +-done ++fi + +-# Be sure to have absolute paths. +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ +- localstatedir libdir includedir oldincludedir infodir mandir ++# Check all directory arguments for consistency. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir + do +- eval ac_val=$`echo $ac_var` ++ eval ac_val=\$$ac_var ++ # Remove trailing slashes. + case $ac_val in +- [\\/$]* | ?:[\\/]* ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++ */ ) ++ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` ++ eval $ac_var=\$ac_val;; ++ esac ++ # Be sure to have absolute directory names. ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac ++ { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -691,7 +1194,7 @@ + if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe +- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. ++ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes +@@ -704,74 +1207,76 @@ + test "$silent" = yes && exec 6>/dev/null + + ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { $as_echo "$as_me: error: working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes +- # Try the directory containing this script, then its parent. +- ac_confdir=`(dirname "$0") 2>/dev/null || +-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$0" : 'X\(//\)[^/]' \| \ +- X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$0" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$as_myself" || ++$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_myself" : 'X\(//\)[^/]' \| \ ++ X"$as_myself" : 'X\(//\)$' \| \ ++ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_myself" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + srcdir=$ac_confdir +- if test ! -r $srcdir/$ac_unique_file; then ++ if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no + fi +-if test ! -r $srcdir/$ac_unique_file; then +- if test "$ac_srcdir_defaulted" = yes; then +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 +- { (exit 1); exit 1; }; } +- else +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +- fi + fi +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } +-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +-ac_env_build_alias_set=${build_alias+set} +-ac_env_build_alias_value=$build_alias +-ac_cv_env_build_alias_set=${build_alias+set} +-ac_cv_env_build_alias_value=$build_alias +-ac_env_host_alias_set=${host_alias+set} +-ac_env_host_alias_value=$host_alias +-ac_cv_env_host_alias_set=${host_alias+set} +-ac_cv_env_host_alias_value=$host_alias +-ac_env_target_alias_set=${target_alias+set} +-ac_env_target_alias_value=$target_alias +-ac_cv_env_target_alias_set=${target_alias+set} +-ac_cv_env_target_alias_value=$target_alias +-ac_env_CC_set=${CC+set} +-ac_env_CC_value=$CC +-ac_cv_env_CC_set=${CC+set} +-ac_cv_env_CC_value=$CC +-ac_env_CFLAGS_set=${CFLAGS+set} +-ac_env_CFLAGS_value=$CFLAGS +-ac_cv_env_CFLAGS_set=${CFLAGS+set} +-ac_cv_env_CFLAGS_value=$CFLAGS +-ac_env_LDFLAGS_set=${LDFLAGS+set} +-ac_env_LDFLAGS_value=$LDFLAGS +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +-ac_cv_env_LDFLAGS_value=$LDFLAGS +-ac_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_env_CPPFLAGS_value=$CPPFLAGS +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS +-ac_env_CPP_set=${CPP+set} +-ac_env_CPP_value=$CPP +-ac_cv_env_CPP_set=${CPP+set} +-ac_cv_env_CPP_value=$CPP ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done + + # + # Report the --help message. +@@ -800,14 +1305,11 @@ + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +-_ACEOF +- +- cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX +- [$ac_default_prefix] ++ [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX +- [PREFIX] ++ [PREFIX] + + By default, \`make install' will install all the files in + \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +@@ -817,18 +1319,25 @@ + For better control, use the options below. + + Fine tuning of the installation directories: +- --bindir=DIR user executables [EPREFIX/bin] +- --sbindir=DIR system admin executables [EPREFIX/sbin] +- --libexecdir=DIR program executables [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data [PREFIX/share] +- --sysconfdir=DIR read-only single-machine data [PREFIX/etc] +- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] +- --localstatedir=DIR modifiable single-machine data [PREFIX/var] +- --libdir=DIR object code libraries [EPREFIX/lib] +- --includedir=DIR C header files [PREFIX/include] +- --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --infodir=DIR info documentation [PREFIX/info] +- --mandir=DIR man documentation [PREFIX/man] ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/tuneit] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -847,18 +1356,21 @@ + cat <<\_ACEOF + + Optional Features: ++ --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] +- --disable-dependency-tracking Speeds up one-time builds +- --enable-dependency-tracking Do not reject slow dependency extractors ++ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors ++ --enable-jack turn on JACK support (default=yes) + + Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> +- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have +- headers in a nonstandard directory <include dir> ++ LIBS libraries to pass to the linker, e.g. -l<library> ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if ++ you have headers in a nonstandard directory <include dir> + CPP C preprocessor + + Use these variables to override the choices made by `configure' or to help +@@ -866,120 +1378,88 @@ + + Report bugs to <Mario Lang <mlang@delysid.org>>. + _ACEOF ++ac_status=$? + fi + + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. +- ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d $ac_dir || continue ++ test -d "$ac_dir" || ++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || ++ continue + ac_builddir=. + +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +- cd $ac_dir +- # Check for guested configure; otherwise get Cygnus style configure. +- if test -f $ac_srcdir/configure.gnu; then +- echo +- $SHELL $ac_srcdir/configure.gnu --help=recursive +- elif test -f $ac_srcdir/configure; then +- echo +- $SHELL $ac_srcdir/configure --help=recursive +- elif test -f $ac_srcdir/configure.ac || +- test -f $ac_srcdir/configure.in; then +- echo +- $ac_configure --help ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive + else +- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 +- fi +- cd "$ac_popdir" ++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } + done + fi + +-test -n "$ac_init_help" && exit 0 ++test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF + tuneit configure 0.3 +-generated by GNU Autoconf 2.59 ++generated by GNU Autoconf 2.63 + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +- exit 0 ++ exit + fi +-exec 5>config.log +-cat >&5 <<_ACEOF ++cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by tuneit $as_me 0.3, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.63. Invocation command line was + + $ $0 $@ + + _ACEOF ++exec 5>>config.log + { + cat <<_ASUNAME + ## --------- ## +@@ -998,7 +1478,7 @@ + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +@@ -1010,8 +1490,9 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- echo "PATH: $as_dir" ++ $as_echo "PATH: $as_dir" + done ++IFS=$as_save_IFS + + } >&5 + +@@ -1033,7 +1514,6 @@ + ac_configure_args= + ac_configure_args0= + ac_configure_args1= +-ac_sep= + ac_must_keep_next=false + for ac_pass in 1 2 + do +@@ -1044,8 +1524,8 @@ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; +@@ -1066,9 +1546,7 @@ + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" +- # Get rid of the leading space. +- ac_sep=" " ++ ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +@@ -1079,8 +1557,8 @@ + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there + # would cause problems or look ugly. +-# WARNING: Be sure not to use single quotes in there, as some shells, +-# such as our DU 5.0 friend, will then `close' the trap. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. + trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { +@@ -1093,20 +1571,35 @@ + _ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done + (set) 2>&1 | +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + sed -n \ +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" +- ;; ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( + *) +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} ++ esac | ++ sort ++) + echo + + cat <<\_ASBOX +@@ -1117,22 +1610,28 @@ + echo + for ac_var in $ac_subst_vars + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +-## ------------- ## +-## Output files. ## +-## ------------- ## ++## ------------------- ## ++## File substitutions. ## ++## ------------------- ## + _ASBOX + echo + for ac_var in $ac_subst_files + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi +@@ -1144,26 +1643,24 @@ + ## ----------- ## + _ASBOX + echo +- sed "/^$/d" confdefs.h | sort ++ cat confdefs.h + echo + fi + test "$ac_signal" != 0 && +- echo "$as_me: caught signal $ac_signal" +- echo "$as_me: exit $exit_status" ++ $as_echo "$as_me: caught signal $ac_signal" ++ $as_echo "$as_me: exit $exit_status" + } >&5 +- rm -f core *.core && +- rm -rf conftest* confdefs* conf$$* $ac_clean_files && ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +- ' 0 ++' 0 + for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo >confdefs.h ++rm -f -r conftest* confdefs.h + + # Predefined preprocessor variables. + +@@ -1193,18 +1690,24 @@ + + + # Let the site file select an alternate cache file if it wants to. +-# Prefer explicitly selected file to automatically selected ones. +-if test -z "$CONFIG_SITE"; then +- if test "x$prefix" != xNONE; then +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" +- else +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +- fi ++# Prefer an explicitly selected file to automatically selected ones. ++ac_site_file1=NONE ++ac_site_file2=NONE ++if test -n "$CONFIG_SITE"; then ++ ac_site_file1=$CONFIG_SITE ++elif test "x$prefix" != xNONE; then ++ ac_site_file1=$prefix/share/config.site ++ ac_site_file2=$prefix/etc/config.site ++else ++ ac_site_file1=$ac_default_prefix/share/config.site ++ ac_site_file2=$ac_default_prefix/etc/config.site + fi +-for ac_site_file in $CONFIG_SITE; do ++for ac_site_file in "$ac_site_file1" "$ac_site_file2" ++do ++ test "x$ac_site_file" = xNONE && continue + if test -r "$ac_site_file"; then +- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +-echo "$as_me: loading site script $ac_site_file" >&6;} ++ { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ++$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +@@ -1214,54 +1717,61 @@ + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then +- { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +-echo "$as_me: loading cache $cache_file" >&6;} ++ { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 ++$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in +- [\\/]* | ?:[\\/]* ) . $cache_file;; +- *) . ./$cache_file;; ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; + esac + fi + else +- { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +-echo "$as_me: creating cache $cache_file" >&6;} ++ { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 ++$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file + fi + + # Check that the precious variables saved in the cache have kept the same + # value. + ac_cache_corrupted=false +-for ac_var in `(set) 2>&1 | +- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do ++for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set +- eval ac_old_val="\$ac_cv_env_${ac_var}_value" +- eval ac_new_val="\$ac_env_${ac_var}_value" ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) +- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) +- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then +- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} +- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +-echo "$as_me: former value: $ac_old_val" >&2;} +- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +-echo "$as_me: current value: $ac_new_val" >&2;} +- ac_cache_corrupted=: ++ # differences in whitespace do not lead to failure. ++ ac_old_val_w=`echo x $ac_old_val` ++ ac_new_val_w=`echo x $ac_new_val` ++ if test "$ac_old_val_w" != "$ac_new_val_w"; then ++ { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ ac_cache_corrupted=: ++ else ++ { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 ++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} ++ eval $ac_var=\$ac_old_val ++ fi ++ { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 ++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} ++ { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 ++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in +@@ -1271,18 +1781,15 @@ + fi + done + if $ac_cache_corrupted; then +- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +-echo "$as_me: error: changes in the environment can compromise the build" >&2;} +- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} ++ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++ { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 ++$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } + fi + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +@@ -1307,34 +1814,45 @@ + + + ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + + ++am__api_version='1.10' + +-am__api_version="1.7" + ac_aux_dir= +-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +- if test -f $ac_dir/install-sh; then ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break +- elif test -f $ac_dir/install.sh; then ++ elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break +- elif test -f $ac_dir/shtool; then ++ elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi + done + if test -z "$ac_aux_dir"; then +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} ++ { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } + fi +-ac_config_guess="$SHELL $ac_aux_dir/config.guess" +-ac_config_sub="$SHELL $ac_aux_dir/config.sub" +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ + + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or +@@ -1349,11 +1867,12 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++# Reject install programs that cannot install multiple files. ++{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++$as_echo_n "checking for a BSD-compatible install... " >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -1372,7 +1891,7 @@ + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -1382,30 +1901,43 @@ + # program-specific install script used by HP pwplus--don't use. + : + else +- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" +- break 3 ++ rm -rf conftest.one conftest.two conftest.dir ++ echo one > conftest.one ++ echo two > conftest.two ++ mkdir conftest.dir ++ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && ++ test -s conftest.one && test -s conftest.two && ++ test -s conftest.dir/conftest.one && ++ test -s conftest.dir/conftest.two ++ then ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi + fi + fi + done + done + ;; + esac ++ + done ++IFS=$as_save_IFS + ++rm -rf conftest.one conftest.two conftest.dir + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 ++$as_echo "$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -1415,8 +1947,8 @@ + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++$as_echo_n "checking whether build environment is sane... " >&6; } + # Just in case + sleep 1 + echo timestamp > conftest.file +@@ -1439,9 +1971,9 @@ + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". +- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken ++ { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken + alias in your environment" >&5 +-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken ++$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken + alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi +@@ -1452,27 +1984,23 @@ + # Ok. + : + else +- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! ++ { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! + Check your system clock" >&5 +-echo "$as_me: error: newly created file is older than distributed files! ++$as_echo "$as_me: error: newly created file is older than distributed files! + Check your system clock" >&2;} + { (exit 1); exit 1; }; } + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ $as_echo "$as_me:$LINENO: result: yes" >&5 ++$as_echo "yes" >&6; } + test "$program_prefix" != NONE && +- program_transform_name="s,^,$program_prefix,;$program_transform_name" ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && +- program_transform_name="s,\$,$program_suffix,;$program_transform_name" +-# Double any \ or $. echo might interpret backslashes. ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" ++# Double any \ or $. + # By default was `s,x,x', remove it if useless. +-cat <<\_ACEOF >conftest.sed +-s/[\\$]/&&/g;s/;s,x,x,$// +-_ACEOF +-program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +-rm conftest.sed +- ++ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' ++program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` +@@ -1483,18 +2011,66 @@ + am_missing_run="$MISSING --run " + else + am_missing_run= +- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 ++$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++fi ++ ++{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 ++$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } ++if test -z "$MKDIR_P"; then ++ if test "${ac_cv_path_mkdir+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in mkdir gmkdir; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue ++ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( ++ 'mkdir (GNU coreutils) '* | \ ++ 'mkdir (coreutils) '* | \ ++ 'mkdir (fileutils) '4.1*) ++ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext ++ break 3;; ++ esac ++ done ++ done ++done ++IFS=$as_save_IFS ++ ++fi ++ ++ if test "${ac_cv_path_mkdir+set}" = set; then ++ MKDIR_P="$ac_cv_path_mkdir -p" ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for MKDIR_P within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ test -d ./--version && rmdir ./--version ++ MKDIR_P="$ac_install_sh -d" ++ fi + fi ++{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 ++$as_echo "$MKDIR_P" >&6; } ++ ++mkdir_p="$MKDIR_P" ++case $mkdir_p in ++ [\\/$]* | ?:[\\/]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac + + for ac_prog in gawk mawk nawk awk + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_AWK+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +@@ -1505,54 +2081,58 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + AWK=$ac_cv_prog_AWK + if test -n "$AWK"; then +- echo "$as_me:$LINENO: result: $AWK" >&5 +-echo "${ECHO_T}$AWK" >&6 ++ { $as_echo "$as_me:$LINENO: result: $AWK" >&5 ++$as_echo "$AWK" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + test -n "$AWK" && break + done + +-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } ++set x ${MAKE-make} ++ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then ++ $as_echo_n "(cached) " >&6 + else + cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh + all: +- @echo 'ac_maketemp="$(MAKE)"' ++ @echo '@@@%%%=$(MAKE)=@@@%%%' + _ACEOF + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. +-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +-if test -n "$ac_maketemp"; then +- eval ac_cv_prog_make_${ac_make}_set=yes +-else +- eval ac_cv_prog_make_${ac_make}_set=no +-fi ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac + rm -f conftest.make + fi +-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { $as_echo "$as_me:$LINENO: result: yes" >&5 ++$as_echo "yes" >&6; } + SET_MAKE= + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi + +@@ -1565,12 +2145,16 @@ + fi + rmdir .tst 2>/dev/null + +- # test to see if srcdir already configured +-if test "`cd $srcdir && pwd`" != "`pwd`" && +- test -f $srcdir/config.status; then +- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ am__isrc=' -I$(srcdir)' ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 ++$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } ++ fi + fi + + # test whether we have cygpath +@@ -1613,10 +2197,7 @@ + + MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +- +-AMTAR=${AMTAR-"${am_missing_run}tar"} +- +-install_sh=${install_sh-"$am_aux_dir/install-sh"} ++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} + + # Installed binaries are usually stripped using `strip' when the user + # run `make install-strip'. However `strip' might not be the right +@@ -1626,10 +2207,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +@@ -1640,34 +2221,36 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 ++ { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 ++$as_echo "$STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +@@ -1678,41 +2261,58 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 ++ { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++$as_echo "$ac_ct_STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + fi + +- STRIP=$ac_ct_STRIP ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi + else + STRIP="$ac_cv_prog_STRIP" + fi + + fi +-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. ++# Always define AMTAR for backward compatibility. ++ ++AMTAR=${AMTAR-"${am_missing_run}tar"} ++ ++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + +- ac_config_headers="$ac_config_headers config.h" ++ ++ ++ac_config_headers="$ac_config_headers config.h" + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -1722,10 +2322,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -1736,34 +2336,36 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -1774,38 +2376,49 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + fi + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -1816,76 +2429,36 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +-fi +-if test -z "$ac_cv_prog_CC"; then +- ac_ct_CC=$CC +- # Extract the first word of "cc", so it can be a program name with args. +-set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_CC"; then +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi +-fi +-ac_ct_CC=$ac_cv_prog_ac_ct_CC +-if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + fi + +- CC=$ac_ct_CC +-else +- CC="$ac_cv_prog_CC" +-fi + ++ fi + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -1897,17 +2470,18 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. +@@ -1925,24 +2499,25 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -1953,38 +2528,40 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -1995,58 +2572,90 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + test -n "$ac_ct_CC" && break + done + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + fi + + fi + + +-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ++test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&5 +-echo "$as_me: error: no acceptable C compiler found in \$PATH ++$as_echo "$as_me: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++ { (exit 1); exit 1; }; }; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C compiler version" >&5 +-ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 +- (eval $ac_compiler --version </dev/null >&5) 2>&5 ++$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 ++set X $ac_compile ++ac_compiler=$2 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 +- (eval $ac_compiler -v </dev/null >&5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 +- (eval $ac_compiler -V </dev/null >&5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + + cat >conftest.$ac_ext <<_ACEOF +@@ -2065,111 +2674,150 @@ + } + _ACEOF + ac_clean_files_save=$ac_clean_files +-ac_clean_files="$ac_clean_files a.out a.exe b.out" ++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 +- (eval $ac_link_default) 2>&5 ++{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++$as_echo_n "checking for C compiler default output file name... " >&6; } ++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++ ++# The possible output files: ++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ++ ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_link_default") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Find the output, starting from the most likely. This scheme is +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last +-# resort. +- +-# Be careful to initialize this variable, since it used to be cached. +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +-ac_cv_exeext= +-# b.out is created by i960 compilers. +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) +- ;; +- conftest.$ac_ext ) +- # This is the source file. ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) +- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- # FIXME: I believe we export ac_cv_exeext for Libtool, +- # but it would be cool to find out if it's true. Does anybody +- # maintain Libtool? --akim. +- export ac_cv_exeext ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. + break;; + * ) + break;; + esac + done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ + else +- echo "$as_me: failed program was:" >&5 ++ ac_file='' ++fi ++ ++{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 ++$as_echo "$ac_file" >&6; } ++if test -z "$ac_file"; then ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables ++{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables + See \`config.log' for more details." >&5 +-echo "$as_me: error: C compiler cannot create executables ++$as_echo "$as_me: error: C compiler cannot create executables + See \`config.log' for more details." >&2;} +- { (exit 77); exit 77; }; } ++ { (exit 77); exit 77; }; }; } + fi + + ac_exeext=$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_file" >&5 +-echo "${ECHO_T}$ac_file" >&6 + +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++$as_echo_n "checking whether the C compiler works... " >&6; } + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else +- { { echo "$as_me:$LINENO: error: cannot run C compiled programs. ++ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. + If you meant to cross compile, use \`--host'. + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run C compiled programs. ++$as_echo "$as_me: error: cannot run C compiled programs. + If you meant to cross compile, use \`--host'. + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++ { (exit 1); exit 1; }; }; } + fi + fi + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ $as_echo "$as_me:$LINENO: result: yes" >&5 ++$as_echo "yes" >&6; } + +-rm -f a.out a.exe conftest$ac_cv_exeext b.out ++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-echo "${ECHO_T}$cross_compiling" >&6 +- +-echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++$as_echo_n "checking whether we are cross compiling... " >&6; } ++{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++$as_echo "$cross_compiling" >&6; } ++ ++{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++$as_echo_n "checking for suffix of executables... " >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) + # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +@@ -2178,32 +2826,33 @@ + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- export ac_cv_exeext + break;; + * ) break;; + esac + done + else +- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ++ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ++$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++ { (exit 1); exit 1; }; }; } + fi + + rm -f conftest$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-echo "${ECHO_T}$ac_cv_exeext" >&6 ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++$as_echo "$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++$as_echo_n "checking for suffix of object files... " >&6; } + if test "${ac_cv_objext+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2221,39 +2870,48 @@ + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac + done + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ++{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute suffix of object files: cannot compile ++$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++ { (exit 1); exit 1; }; }; } + fi + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-echo "${ECHO_T}$ac_cv_objext" >&6 ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++$as_echo "$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2274,49 +2932,54 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +-GCC=`test $ac_compiler_gnu = yes && echo yes` ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++$as_echo "$ac_cv_c_compiler_gnu" >&6; } ++if test $ac_compiler_gnu = yes; then ++ GCC=yes ++else ++ GCC= ++fi + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-CFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++$as_echo_n "checking whether $CC accepts -g... " >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -2332,37 +2995,121 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cc_g=no ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++$as_echo "$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -2378,12 +3125,12 @@ + CFLAGS= + fi + fi +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then ++ $as_echo_n "(cached) " >&6 + else +- ac_cv_prog_cc_stdc=no ++ ac_cv_prog_cc_c89=no + ac_save_CC=$CC + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2417,12 +3164,17 @@ + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated +- as 'x'. The following induces an error, until -std1 is added to get ++ as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something +- that's true only with -std1. */ ++ that's true only with -std. */ + int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ + int test (int i, double x); + struct s1 {int (*f) (int a);}; + struct s2 {int (*f) (double a);}; +@@ -2437,201 +3189,58 @@ + return 0; + } + _ACEOF +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX 10.20 and later -Ae +-# HP-UX older versions -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_prog_cc_stdc=$ac_arg +-break ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_c89=$ac_arg + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break + done +-rm -f conftest.$ac_ext conftest.$ac_objext ++rm -f conftest.$ac_ext + CC=$ac_save_CC + + fi +- +-case "x$ac_cv_prog_cc_stdc" in +- x|xno) +- echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6 ;; ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { $as_echo "$as_me:$LINENO: result: none needed" >&5 ++$as_echo "none needed" >&6; } ;; ++ xno) ++ { $as_echo "$as_me:$LINENO: result: unsupported" >&5 ++$as_echo "unsupported" >&6; } ;; + *) +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 +- CC="$CC $ac_cv_prog_cc_stdc" ;; ++ CC="$CC $ac_cv_prog_cc_c89" ++ { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; + esac + +-# Some people use a C++ compiler to compile C. Since we use `exit', +-# in C++ we need to declare it. In case someone uses the same compiler +-# for both compiling C and C++ we need to have the C++ compiler decide +-# the declaration of exit, since it's the most demanding environment. +-cat >conftest.$ac_ext <<_ACEOF +-#ifndef __cplusplus +- choke me +-#endif +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-#include <stdlib.h> +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-continue +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h +-fi +- +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -2639,7 +3248,7 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + DEPDIR="${am__leading_dot}deps" + +- ac_config_commands="$ac_config_commands depfiles" ++ac_config_commands="$ac_config_commands depfiles" + + + am_make=${MAKE-make} +@@ -2649,8 +3258,8 @@ + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++$as_echo_n "checking for style of include used by $am_make... " >&6; } + am__include="#" + am__quote= + _am_result=none +@@ -2677,22 +3286,20 @@ + fi + + +-echo "$as_me:$LINENO: result: $_am_result" >&5 +-echo "${ECHO_T}$_am_result" >&6 ++{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 ++$as_echo "$_am_result" >&6; } + rm -f confinc confmf + +-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. ++# Check whether --enable-dependency-tracking was given. + if test "${enable_dependency_tracking+set}" = set; then +- enableval="$enable_dependency_tracking" ++ enableval=$enable_dependency_tracking; ++fi + +-fi; + if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + fi +- +- +-if test "x$enable_dependency_tracking" != xno; then ++ if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' + else +@@ -2702,13 +3309,12 @@ + + + +- + depcc="$CC" am_compiler_list= + +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++$as_echo_n "checking dependency style of $depcc... " >&6; } + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up +@@ -2744,7 +3350,9 @@ + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c +- : > sub/conftst$i.h ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +@@ -2768,13 +3376,19 @@ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings +- # (even with -Werror). So we grep stderr for any message +- # that says an option was ignored. +- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi +@@ -2788,13 +3402,11 @@ + fi + + fi +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 ++{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + +- +- +-if ++ if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= +@@ -2818,11 +3430,12 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++# Reject install programs that cannot install multiple files. ++{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++$as_echo_n "checking for a BSD-compatible install... " >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -2841,7 +3454,7 @@ + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -2851,30 +3464,43 @@ + # program-specific install script used by HP pwplus--don't use. + : + else +- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" +- break 3 ++ rm -rf conftest.one conftest.two conftest.dir ++ echo one > conftest.one ++ echo two > conftest.two ++ mkdir conftest.dir ++ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && ++ test -s conftest.one && test -s conftest.two && ++ test -s conftest.dir/conftest.one && ++ test -s conftest.dir/conftest.two ++ then ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi + fi + fi + done + done + ;; + esac ++ + done ++IFS=$as_save_IFS + ++rm -rf conftest.one conftest.two conftest.dir + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 ++$as_echo "$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -2886,10 +3512,10 @@ + + + +-echo "$as_me:$LINENO: checking for snd_pcm_open in -lasound" >&5 +-echo $ECHO_N "checking for snd_pcm_open in -lasound... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for snd_pcm_open in -lasound" >&5 ++$as_echo_n "checking for snd_pcm_open in -lasound... " >&6; } + if test "${ac_cv_lib_asound_snd_pcm_open+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lasound $LIBS" +@@ -2900,56 +3526,58 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char snd_pcm_open (); + int + main () + { +-snd_pcm_open (); ++return snd_pcm_open (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ $as_test_x conftest$ac_exeext ++ }; then + ac_cv_lib_asound_snd_pcm_open=yes + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_asound_snd_pcm_open=no ++ ac_cv_lib_asound_snd_pcm_open=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -rf conftest.dSYM ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_asound_snd_pcm_open" >&5 +-echo "${ECHO_T}$ac_cv_lib_asound_snd_pcm_open" >&6 +-if test $ac_cv_lib_asound_snd_pcm_open = yes; then ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_asound_snd_pcm_open" >&5 ++$as_echo "$ac_cv_lib_asound_snd_pcm_open" >&6; } ++if test "x$ac_cv_lib_asound_snd_pcm_open" = x""yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBASOUND 1 + _ACEOF +@@ -2957,16 +3585,16 @@ + LIBS="-lasound $LIBS" + + else +- { { echo "$as_me:$LINENO: error: Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6" >&5 +-echo "$as_me: error: Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6" >&2;} ++ { { $as_echo "$as_me:$LINENO: error: Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6" >&5 ++$as_echo "$as_me: error: Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6" >&2;} + { (exit 1); exit 1; }; } + fi + + +-echo "$as_me:$LINENO: checking for fftwf_plan_dft_r2c_1d in -lfftw3f" >&5 +-echo $ECHO_N "checking for fftwf_plan_dft_r2c_1d in -lfftw3f... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for fftwf_plan_dft_r2c_1d in -lfftw3f" >&5 ++$as_echo_n "checking for fftwf_plan_dft_r2c_1d in -lfftw3f... " >&6; } + if test "${ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lfftw3f $LIBS" +@@ -2977,56 +3605,58 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char fftwf_plan_dft_r2c_1d (); + int + main () + { +-fftwf_plan_dft_r2c_1d (); ++return fftwf_plan_dft_r2c_1d (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ $as_test_x conftest$ac_exeext ++ }; then + ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d=yes + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d=no ++ ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -rf conftest.dSYM ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" >&5 +-echo "${ECHO_T}$ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" >&6 +-if test $ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d = yes; then ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" >&5 ++$as_echo "$ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" >&6; } ++if test "x$ac_cv_lib_fftw3f_fftwf_plan_dft_r2c_1d" = x""yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBFFTW3F 1 + _ACEOF +@@ -3034,102 +3664,38 @@ + LIBS="-lfftw3f $LIBS" + + else +- { { echo "$as_me:$LINENO: error: Couldn't find FFTW3 library. You must install it first." >&5 +-echo "$as_me: error: Couldn't find FFTW3 library. You must install it first." >&2;} ++ { { $as_echo "$as_me:$LINENO: error: Couldn't find FFTW3 library. You must install it first." >&5 ++$as_echo "$as_me: error: Couldn't find FFTW3 library. You must install it first." >&2;} + { (exit 1); exit 1; }; } + fi + +- +-echo "$as_me:$LINENO: checking for jack_client_new in -ljack" >&5 +-echo $ECHO_N "checking for jack_client_new in -ljack... $ECHO_C" >&6 +-if test "${ac_cv_lib_jack_jack_client_new+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ljack $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char jack_client_new (); +-int +-main () +-{ +-jack_client_new (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_jack_jack_client_new=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_jack_jack_client_new=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_jack_jack_client_new" >&5 +-echo "${ECHO_T}$ac_cv_lib_jack_jack_client_new" >&6 +-if test $ac_cv_lib_jack_jack_client_new = yes; then +- cat >>confdefs.h <<_ACEOF +-#define HAVE_LIBJACK 1 +-_ACEOF +- +- LIBS="-ljack $LIBS" +- +-else +- { { echo "$as_me:$LINENO: error: Couldn't find JACK library. You must install it first." >&5 +-echo "$as_me: error: Couldn't find JACK library. You must install it first." >&2;} +- { (exit 1); exit 1; }; } ++{ $as_echo "$as_me:$LINENO: checking whether to enable JACK" >&5 ++$as_echo_n "checking whether to enable JACK... " >&6; } ++# Check whether --enable-jack was given. ++if test "${enable_jack+set}" = set; then ++ enableval=$enable_jack; enable_jack=$enableval ++else ++ enable_jack=yes + fi + +-ac_ext=c ++if test "x$enable_jack" = "xyes"; then ++ { $as_echo "$as_me:$LINENO: result: yes" >&5 ++$as_echo "yes" >&6; } ++ CFLAGS="$CFLAGS -DHAVE_JACK" ++ ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++$as_echo_n "checking how to run the C preprocessor... " >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= + fi + if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" +@@ -3156,35 +3722,35 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3194,34 +3760,34 @@ + /* end confdefs.h. */ + #include <ac_nonexistent.h> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -3239,8 +3805,8 @@ + else + ac_cv_prog_CPP=$CPP + fi +-echo "$as_me:$LINENO: result: $CPP" >&5 +-echo "${ECHO_T}$CPP" >&6 ++{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 ++$as_echo "$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -3263,35 +3829,35 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3301,34 +3867,34 @@ + /* end confdefs.h. */ + #include <ac_nonexistent.h> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -3337,11 +3903,13 @@ + if $ac_preproc_ok; then + : + else +- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ++ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check + See \`config.log' for more details." >&5 +-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ++$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++ { (exit 1); exit 1; }; }; } + fi + + ac_ext=c +@@ -3351,25 +3919,144 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-echo "$as_me:$LINENO: checking for egrep" >&5 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +-if test "${ac_cv_prog_egrep+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' ++{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++$as_echo_n "checking for grep that handles long lines and -e... " >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++else ++ if test -z "$GREP"; then ++ ac_path_GREP_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++# Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_GREP_found && break 3 ++ done ++ done ++done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_GREP"; then ++ { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++fi ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++$as_echo "$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 ++$as_echo_n "checking for egrep... " >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ if test -z "$EGREP"; then ++ ac_path_EGREP_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++# Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_EGREP_found && break 3 ++ done ++ done ++done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_EGREP"; then ++ { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++else ++ ac_cv_path_EGREP=$EGREP + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6 +- EGREP=$ac_cv_prog_egrep + ++ fi ++fi ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++$as_echo "$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" + +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 ++ ++{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++$as_echo_n "checking for ANSI C header files... " >&6; } + if test "${ac_cv_header_stdc+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ $as_echo_n "(cached) " >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3391,34 +4078,32 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_stdc=no ++ ac_cv_header_stdc=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +@@ -3474,6 +4159,7 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <ctype.h> ++#include <stdlib.h> + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +@@ -3493,36 +4179,50 @@ + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); ++ return 2; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : + else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: program exited with status $ac_status" >&5 ++$as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -rf conftest.dSYM ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++$as_echo "$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -3544,11 +4244,11 @@ + for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h + do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 ++$as_echo_n "checking for $ac_header... " >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ $as_echo_n "(cached) " >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3561,40 +4261,42 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_Header=no" ++ eval "$as_ac_Header=no" + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +-if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ac_res=`eval 'as_val=${'$as_ac_Header'} ++ $as_echo "$as_val"'` ++ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++as_val=`eval 'as_val=${'$as_ac_Header'} ++ $as_echo "$as_val"'` ++ if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi +@@ -3602,18 +4304,18 @@ + done + + +-if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then +- echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 +-echo $ECHO_N "checking for alsa/asoundlib.h... $ECHO_C" >&6 +-if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++if test "${ac_cv_header_jack_jack_h+set}" = set; then ++ { $as_echo "$as_me:$LINENO: checking for jack/jack.h" >&5 ++$as_echo_n "checking for jack/jack.h... " >&6; } ++if test "${ac_cv_header_jack_jack_h+set}" = set; then ++ $as_echo_n "(cached) " >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_alsa_asoundlib_h" >&5 +-echo "${ECHO_T}$ac_cv_header_alsa_asoundlib_h" >&6 ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_jack_jack_h" >&5 ++$as_echo "$ac_cv_header_jack_jack_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking alsa/asoundlib.h usability" >&5 +-echo $ECHO_N "checking alsa/asoundlib.h usability... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking jack/jack.h usability" >&5 ++$as_echo_n "checking jack/jack.h usability... " >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -3621,184 +4323,419 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default +-#include <alsa/asoundlib.h> ++#include <jack/jack.h> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++$as_echo "$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking alsa/asoundlib.h presence" >&5 +-echo $ECHO_N "checking alsa/asoundlib.h presence... $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking jack/jack.h presence" >&5 ++$as_echo_n "checking jack/jack.h presence... " >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include <alsa/asoundlib.h> ++#include <jack/jack.h> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++$as_echo "$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) +- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: accepted by the compiler, rejected by the preprocessor!" >&5 ++$as_echo "$as_me: WARNING: jack/jack.h: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: jack/jack.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX ++ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: present but cannot be compiled" >&5 ++$as_echo "$as_me: WARNING: jack/jack.h: present but cannot be compiled" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: check for missing prerequisite headers?" >&5 ++$as_echo "$as_me: WARNING: jack/jack.h: check for missing prerequisite headers?" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: see the Autoconf documentation" >&5 ++$as_echo "$as_me: WARNING: jack/jack.h: see the Autoconf documentation" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: section \"Present But Cannot Be Compiled\"" >&5 ++$as_echo "$as_me: WARNING: jack/jack.h: section \"Present But Cannot Be Compiled\"" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: proceeding with the preprocessor's result" >&5 ++$as_echo "$as_me: WARNING: jack/jack.h: proceeding with the preprocessor's result" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: jack/jack.h: in the future, the compiler will take precedence" >&5 ++$as_echo "$as_me: WARNING: jack/jack.h: in the future, the compiler will take precedence" >&2;} ++ ( cat <<\_ASBOX + ## --------------------------------------------- ## + ## Report this to Mario Lang <mlang@delysid.org> ## + ## --------------------------------------------- ## + _ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac +-echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 +-echo $ECHO_N "checking for alsa/asoundlib.h... $ECHO_C" >&6 +-if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:$LINENO: checking for jack/jack.h" >&5 ++$as_echo_n "checking for jack/jack.h... " >&6; } ++if test "${ac_cv_header_jack_jack_h+set}" = set; then ++ $as_echo_n "(cached) " >&6 + else +- ac_cv_header_alsa_asoundlib_h=$ac_header_preproc ++ ac_cv_header_jack_jack_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_alsa_asoundlib_h" >&5 +-echo "${ECHO_T}$ac_cv_header_alsa_asoundlib_h" >&6 ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_jack_jack_h" >&5 ++$as_echo "$ac_cv_header_jack_jack_h" >&6; } + + fi +-if test $ac_cv_header_alsa_asoundlib_h = yes; then ++if test "x$ac_cv_header_jack_jack_h" = x""yes; then + : + else +- { { echo "$as_me:$LINENO: error: Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers" >&5 +-echo "$as_me: error: Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers" >&2;} ++ { { $as_echo "$as_me:$LINENO: error: JACK headers not found." >&5 ++$as_echo "$as_me: error: JACK headers not found." >&2;} + { (exit 1); exit 1; }; } + fi + + +- ac_config_files="$ac_config_files Makefile src/Makefile" +-cat >confcache <<\_ACEOF +-# This file is a shell script that caches the results of configure +-# tests run on this system so they can be shared between configure +-# scripts and configure runs, see configure's option --config-cache. +-# It is not useful on other systems. If it contains results you don't +-# want to keep, you may remove or edit it. +-# +-# config.status only pays attention to the cache file if you give it +-# the --recheck option to rerun configure. +-# +-# `ac_cv_env_foo' variables (set or unset) will be overridden when +-# loading this file, other *unset* `ac_cv_foo' will be assigned the +-# following values. + ++{ $as_echo "$as_me:$LINENO: checking for main in -ljack" >&5 ++$as_echo_n "checking for main in -ljack... " >&6; } ++if test "${ac_cv_lib_jack_main+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ljack $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ + _ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# The following way of writing the cache mishandles newlines in values, +-# but we know of no workaround that is simple, portable, and efficient. +-# So, don't put newlines in cache variables' values. +-# Ultrix sh set writes to stderr and can't be redirected directly, +-# and sets the high bit in the cache file unless we assign to the vars. ++ ++int ++main () + { +- (set) 2>&1 | +- case `(ac_space=' '; set | grep ac_space) 2>&1` in +- *ac_space=\ *) +- # `set' does not quote correctly, so add quotes (double-quote +- # substitution turns \\\\ into \\, and sed turns \\ into \). +- sed -n \ +- "s/'/'\\\\''/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +- ;; +- *) +- # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++return main (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ $as_test_x conftest$ac_exeext ++ }; then ++ ac_cv_lib_jack_main=yes ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_jack_main=no ++fi ++ ++rm -rf conftest.dSYM ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_jack_main" >&5 ++$as_echo "$ac_cv_lib_jack_main" >&6; } ++if test "x$ac_cv_lib_jack_main" = x""yes; then ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_LIBJACK 1 ++_ACEOF ++ ++ LIBS="-ljack $LIBS" ++ ++else ++ { { $as_echo "$as_me:$LINENO: error: JACK library not found." >&5 ++$as_echo "$as_me: error: JACK library not found." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then ++ { $as_echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 ++$as_echo_n "checking for alsa/asoundlib.h... " >&6; } ++if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++fi ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_alsa_asoundlib_h" >&5 ++$as_echo "$ac_cv_header_alsa_asoundlib_h" >&6; } ++else ++ # Is the header compilable? ++{ $as_echo "$as_me:$LINENO: checking alsa/asoundlib.h usability" >&5 ++$as_echo_n "checking alsa/asoundlib.h usability... " >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++#include <alsa/asoundlib.h> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_compiler=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++$as_echo "$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ $as_echo "$as_me:$LINENO: checking alsa/asoundlib.h presence" >&5 ++$as_echo_n "checking alsa/asoundlib.h presence... " >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include <alsa/asoundlib.h> ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++$as_echo "$ac_try_echo") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ ac_header_preproc=yes ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_preproc=no ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++$as_echo "$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 ++$as_echo "$as_me: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&5 ++$as_echo "$as_me: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&5 ++$as_echo "$as_me: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&5 ++$as_echo "$as_me: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&5 ++$as_echo "$as_me: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&5 ++$as_echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;} ++ { $as_echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&5 ++$as_echo "$as_me: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&2;} ++ ( cat <<\_ASBOX ++## --------------------------------------------- ## ++## Report this to Mario Lang <mlang@delysid.org> ## ++## --------------------------------------------- ## ++_ASBOX ++ ) | sed "s/^/$as_me: WARNING: /" >&2 ++ ;; ++esac ++{ $as_echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 ++$as_echo_n "checking for alsa/asoundlib.h... " >&6; } ++if test "${ac_cv_header_alsa_asoundlib_h+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++else ++ ac_cv_header_alsa_asoundlib_h=$ac_header_preproc ++fi ++{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_alsa_asoundlib_h" >&5 ++$as_echo "$ac_cv_header_alsa_asoundlib_h" >&6; } ++ ++fi ++if test "x$ac_cv_header_alsa_asoundlib_h" = x""yes; then ++ : ++else ++ { { $as_echo "$as_me:$LINENO: error: Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers" >&5 ++$as_echo "$as_me: error: Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ac_config_files="$ac_config_files Makefile src/Makefile" ++ ++cat >confcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} | ++ esac | ++ sort ++) | + sed ' ++ /^ac_cv_env_/b end + t clear +- : clear ++ :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end +- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ +- : end' >>confcache +-if diff $cache_file confcache >/dev/null 2>&1; then :; else +- if test -w $cache_file; then +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++$as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- echo "not updating unwritable cache $cache_file" ++ { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache +@@ -3807,32 +4744,18 @@ + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/; +-s/:*\${srcdir}:*/:/; +-s/:*@srcdir@:*/:/; +-s/^\([^=]*=[ ]*\):*/\1/; +-s/:*$//; +-s/^[^=]*=[ ]*$//; +-}' +-fi +- + DEFS=-DHAVE_CONFIG_H + + ac_libobjs= + ac_ltlibobjs= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. +- ac_i=`echo "$ac_i" | +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` +- # 2. Add them. +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + +@@ -3840,26 +4763,27 @@ + + + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. ++ { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"AMDEP\" was never defined. ++$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++ { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + + : ${CONFIG_STATUS=./config.status} ++ac_write_fail=0 + ac_clean_files_save=$ac_clean_files + ac_clean_files="$ac_clean_files $CONFIG_STATUS" +-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +-echo "$as_me: creating $CONFIG_STATUS" >&6;} +-cat >$CONFIG_STATUS <<_ACEOF ++{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} ++cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + #! $SHELL + # Generated by $as_me. + # Run this file to recreate the current configuration. +@@ -3872,22 +4796,78 @@ + SHELL=\${CONFIG_SHELL-$SHELL} + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' ++else ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' ++ else ++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in ++ *"$as_nl"*) ++ expr "X$arg" : "X\\(.*\\)$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; ++ esac; ++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' ++ fi ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' ++fi ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -3897,33 +4877,60 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' + + # NLS nuisances. +-for as_var in \ +- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ +- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ +- LC_TELEPHONE LC_TIME +-do +- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then +- eval $as_var=C; export $as_var +- else +- $as_unset $as_var +- fi +-done ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -3931,159 +4938,122 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits ++# CDPATH. ++$as_unset CDPATH + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh +-fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done +- +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in +- /*) +- if ("$as_dir/$as_base" -c ' +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ++ chmod +x "$as_me.lineno" || ++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +-esac ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file +-echo >conf$$.file +-if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links +- as_ln_s='cp -p' +- else ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null ++fi ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else ++ as_ln_s='cp -p' + fi +-elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -4092,7 +5062,28 @@ + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -4101,31 +5092,14 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- + exec 6>&1 + +-# Open the log real soon, to keep \$[0] and so on meaningful, and to ++# Save the log message, to keep $[0] and so on meaningful, and to + # report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. Logging --version etc. is OK. +-exec 5>>config.log +-{ +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +-} >&5 +-cat >&5 <<_CSEOF +- ++# values after options handling. ++ac_log=" + This file was extended by tuneit $as_me 0.3, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.63. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -4133,45 +5107,45 @@ + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +-_CSEOF +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +-echo >&5 ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ + _ACEOF + +-# Files that config.status was made for. +-if test -n "$ac_config_files"; then +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +-fi ++case $ac_config_files in *" ++"*) set x $ac_config_files; shift; ac_config_files=$*;; ++esac + +-if test -n "$ac_config_headers"; then +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +-fi ++case $ac_config_headers in *" ++"*) set x $ac_config_headers; shift; ac_config_headers=$*;; ++esac + +-if test -n "$ac_config_links"; then +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +-fi + +-if test -n "$ac_config_commands"; then +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +-fi ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" + +-cat >>$CONFIG_STATUS <<\_ACEOF ++_ACEOF + ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + ac_cs_usage="\ + \`$as_me' instantiates files from templates according to the + current configuration. + +-Usage: $0 [OPTIONS] [FILE]... ++Usage: $0 [OPTION]... [FILE]... + + -h, --help print this help, then exit +- -V, --version print version number, then exit +- -q, --quiet do not print progress messages ++ -V, --version print version number and configuration settings, then exit ++ -q, --quiet, --silent ++ do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions +- --file=FILE[:TEMPLATE] +- instantiate the configuration file FILE +- --header=FILE[:TEMPLATE] +- instantiate the configuration header FILE ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ --header=FILE[:TEMPLATE] ++ instantiate the configuration header FILE + + Configuration files: + $config_files +@@ -4183,83 +5157,84 @@ + $config_commands + + Report bugs to <bug-autoconf@gnu.org>." +-_ACEOF + +-cat >>$CONFIG_STATUS <<_ACEOF ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_version="\\ + tuneit config.status 0.3 +-configured by $0, generated by GNU Autoconf 2.59, +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ++configured by $0, generated by GNU Autoconf 2.63, ++ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 2008 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." +-srcdir=$srcdir +-INSTALL="$INSTALL" ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++MKDIR_P='$MKDIR_P' ++AWK='$AWK' ++test -n "\$AWK" || AWK=awk + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF +-# If no file are specified by the user, then we need to provide default +-# value. By we need to know if files were specified by the user. ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# The default lists apply if the user does not specify any file. + ac_need_defaults=: + while test $# != 0 + do + case $1 in + --*=*) +- ac_option=`expr "x$1" : 'x\([^=]*\)='` +- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; +- -*) ++ *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; +- *) # This is not an option, so the user has probably given explicit +- # arguments. +- ac_option=$1 +- ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; +- --version | --vers* | -V ) +- echo "$ac_cs_version"; exit 0 ;; +- --he | --h) +- # Conflict between --help and --header +- { { echo "$as_me:$LINENO: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2;} +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- echo "$ac_cs_usage"; exit 0 ;; +- --debug | --d* | -d ) ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ $as_echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift +- CONFIG_FILES="$CONFIG_FILES $ac_optarg" ++ case $ac_optarg in ++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift +- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ++ case $ac_optarg in ++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" + ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { $as_echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2;} ++ -*) { $as_echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + +- *) ac_config_targets="$ac_config_targets $1" ;; ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; + + esac + shift +@@ -4273,40 +5248,54 @@ + fi + + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + if \$ac_cs_recheck; then +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ shift ++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 ++ CONFIG_SHELL='$SHELL' ++ export CONFIG_SHELL ++ exec "\$@" + fi + + _ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ $as_echo "$ac_log" ++} >&5 + +-cat >>$CONFIG_STATUS <<_ACEOF ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + # +-# INIT-COMMANDS section. ++# INIT-COMMANDS + # +- + AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + _ACEOF + ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +- +-cat >>$CONFIG_STATUS <<\_ACEOF ++# Handling of arguments. + for ac_config_target in $ac_config_targets + do +- case "$ac_config_target" in +- # Handling of arguments. +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; +- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; +- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; +- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +-echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; ++ ++ *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ++$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac + done + ++ + # If the user did not use the arguments to specify the items to instantiate, + # then the envvar interface is used. Set only those that are not. + # We use the long form for the default assignment because of an extremely +@@ -4318,712 +5307,642 @@ + fi + + # Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason to put it here, and in addition, ++# simply because there is no reason against having it here, and in addition, + # creating and moving files from /tmp can sometimes cause problems. +-# Create a temporary directory, and hook for its removal unless debugging. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. + $debug || + { +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 + } +- + # Create a (secure) tmp directory for tmp files. + + { +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" + } || + { +- tmp=./confstat$$-$RANDOM +- (umask 077 && mkdir $tmp) ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") + } || + { +- echo "$me: cannot create a temporary directory in ." >&2 ++ $as_echo "$as_me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } + } + ++# Set up the scripts for CONFIG_FILES section. ++# No need to generate them if there are no CONFIG_FILES. ++# This happens for instance with `./config.status config.h'. ++if test -n "$CONFIG_FILES"; then ++ ++ ++ac_cr='
' ++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` ++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ++ ac_cs_awk_cr='\\r' ++else ++ ac_cs_awk_cr=$ac_cr ++fi ++ ++echo 'BEGIN {' >"$tmp/subs1.awk" && + _ACEOF + +-cat >>$CONFIG_STATUS <<_ACEOF + +-# +-# CONFIG_FILES section. +-# ++{ ++ echo "cat >conf$$subs.awk <<_ACEOF" && ++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && ++ echo "_ACEOF" ++} >conf$$subs.sh || ++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ . ./conf$$subs.sh || ++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } + +-# No need to generate the scripts if there are no CONFIG_FILES. +-# This happens for instance when ./config.status config.h +-if test -n "\$CONFIG_FILES"; then +- # Protect against being on the right side of a sed subst in config.status. +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +-s,@SHELL@,$SHELL,;t t +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +-s,@exec_prefix@,$exec_prefix,;t t +-s,@prefix@,$prefix,;t t +-s,@program_transform_name@,$program_transform_name,;t t +-s,@bindir@,$bindir,;t t +-s,@sbindir@,$sbindir,;t t +-s,@libexecdir@,$libexecdir,;t t +-s,@datadir@,$datadir,;t t +-s,@sysconfdir@,$sysconfdir,;t t +-s,@sharedstatedir@,$sharedstatedir,;t t +-s,@localstatedir@,$localstatedir,;t t +-s,@libdir@,$libdir,;t t +-s,@includedir@,$includedir,;t t +-s,@oldincludedir@,$oldincludedir,;t t +-s,@infodir@,$infodir,;t t +-s,@mandir@,$mandir,;t t +-s,@build_alias@,$build_alias,;t t +-s,@host_alias@,$host_alias,;t t +-s,@target_alias@,$target_alias,;t t +-s,@DEFS@,$DEFS,;t t +-s,@ECHO_C@,$ECHO_C,;t t +-s,@ECHO_N@,$ECHO_N,;t t +-s,@ECHO_T@,$ECHO_T,;t t +-s,@LIBS@,$LIBS,;t t +-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +-s,@INSTALL_DATA@,$INSTALL_DATA,;t t +-s,@CYGPATH_W@,$CYGPATH_W,;t t +-s,@PACKAGE@,$PACKAGE,;t t +-s,@VERSION@,$VERSION,;t t +-s,@ACLOCAL@,$ACLOCAL,;t t +-s,@AUTOCONF@,$AUTOCONF,;t t +-s,@AUTOMAKE@,$AUTOMAKE,;t t +-s,@AUTOHEADER@,$AUTOHEADER,;t t +-s,@MAKEINFO@,$MAKEINFO,;t t +-s,@AMTAR@,$AMTAR,;t t +-s,@install_sh@,$install_sh,;t t +-s,@STRIP@,$STRIP,;t t +-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t +-s,@AWK@,$AWK,;t t +-s,@SET_MAKE@,$SET_MAKE,;t t +-s,@am__leading_dot@,$am__leading_dot,;t t +-s,@CC@,$CC,;t t +-s,@CFLAGS@,$CFLAGS,;t t +-s,@LDFLAGS@,$LDFLAGS,;t t +-s,@CPPFLAGS@,$CPPFLAGS,;t t +-s,@ac_ct_CC@,$ac_ct_CC,;t t +-s,@EXEEXT@,$EXEEXT,;t t +-s,@OBJEXT@,$OBJEXT,;t t +-s,@DEPDIR@,$DEPDIR,;t t +-s,@am__include@,$am__include,;t t +-s,@am__quote@,$am__quote,;t t +-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t +-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t +-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t +-s,@CCDEPMODE@,$CCDEPMODE,;t t +-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t +-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t +-s,@CPP@,$CPP,;t t +-s,@EGREP@,$EGREP,;t t +-s,@LIBOBJS@,$LIBOBJS,;t t +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t +-CEOF +- +-_ACEOF +- +- cat >>$CONFIG_STATUS <<\_ACEOF +- # Split the substitutions into bite-sized pieces for seds with +- # small command number limits, like on Digital OSF/1 and HP-UX. +- ac_max_sed_lines=48 +- ac_sed_frag=1 # Number of current file. +- ac_beg=1 # First line for current file. +- ac_end=$ac_max_sed_lines # Line after last line for current file. +- ac_more_lines=: +- ac_sed_cmds= +- while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- else +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- fi +- if test ! -s $tmp/subs.frag; then +- ac_more_lines=false +- else +- # The purpose of the label and of the branching condition is to +- # speed up the sed processing (if there are no `@' at all, there +- # is no need to browse any of the substitutions). +- # These are the two extra sed commands mentioned above. +- (echo ':t +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" +- else +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" +- fi +- ac_sed_frag=`expr $ac_sed_frag + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_lines` +- fi +- done +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat ++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` ++ if test $ac_delim_n = $ac_delim_num; then ++ break ++ elif $ac_last_try; then ++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi ++done ++rm -f conf$$subs.sh ++ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>"\$tmp/subs1.awk" <<\\_ACAWK && ++_ACEOF ++sed -n ' ++h ++s/^/S["/; s/!.*/"]=/ ++p ++g ++s/^[^!]*!// ++:repl ++t repl ++s/'"$ac_delim"'$// ++t delim ++:nl ++h ++s/\(.\{148\}\).*/\1/ ++t more1 ++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ ++p ++n ++b repl ++:more1 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t nl ++:delim ++h ++s/\(.\{148\}\).*/\1/ ++t more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"/ ++p ++b ++:more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t delim ++' <conf$$subs.awk | sed ' ++/^[^""]/{ ++ N ++ s/\n// ++} ++' >>$CONFIG_STATUS || ac_write_fail=1 ++rm -f conf$$subs.awk ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++_ACAWK ++cat >>"\$tmp/subs1.awk" <<_ACAWK && ++ for (key in S) S_is_set[key] = 1 ++ FS = "" ++ ++} ++{ ++ line = $ 0 ++ nfields = split(line, field, "@") ++ substed = 0 ++ len = length(field[1]) ++ for (i = 2; i < nfields; i++) { ++ key = field[i] ++ keylen = length(key) ++ if (S_is_set[key]) { ++ value = S[key] ++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) ++ len += length(value) + length(field[++i]) ++ substed = 1 ++ } else ++ len += 1 + keylen ++ } ++ ++ print line ++} ++ ++_ACAWK ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then ++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" ++else ++ cat ++fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ ++ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 ++$as_echo "$as_me: error: could not setup config files machinery" >&2;} ++ { (exit 1); exit 1; }; } ++_ACEOF ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + fi # test -n "$CONFIG_FILES" + ++# Set up the scripts for CONFIG_HEADERS section. ++# No need to generate them if there are no CONFIG_HEADERS. ++# This happens for instance with `./config.status Makefile'. ++if test -n "$CONFIG_HEADERS"; then ++cat >"$tmp/defines.awk" <<\_ACAWK || ++BEGIN { ++_ACEOF ++ ++# Transform confdefs.h into an awk script `defines.awk', embedded as ++# here-document in config.status, that substitutes the proper values into ++# config.h.in to produce config.h. ++ ++# Create a delimiter string that does not exist in confdefs.h, to ease ++# handling of long lines. ++ac_delim='%!_!# ' ++for ac_last_try in false false :; do ++ ac_t=`sed -n "/$ac_delim/p" confdefs.h` ++ if test -z "$ac_t"; then ++ break ++ elif $ac_last_try; then ++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 ++$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++# For the awk script, D is an array of macro values keyed by name, ++# likewise P contains macro parameters if any. Preserve backslash ++# newline sequences. ++ ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++sed -n ' ++s/.\{148\}/&'"$ac_delim"'/g ++t rset ++:rset ++s/^[ ]*#[ ]*define[ ][ ]*/ / ++t def ++d ++:def ++s/\\$// ++t bsnl ++s/["\\]/\\&/g ++s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ ++D["\1"]=" \3"/p ++s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p ++d ++:bsnl ++s/["\\]/\\&/g ++s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ ++D["\1"]=" \3\\\\\\n"\\/p ++t cont ++s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p ++t cont ++d ++:cont ++n ++s/.\{148\}/&'"$ac_delim"'/g ++t clear ++:clear ++s/\\$// ++t bsnlc ++s/["\\]/\\&/g; s/^/"/; s/$/"/p ++d ++:bsnlc ++s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p ++b cont ++' <confdefs.h | sed ' ++s/'"$ac_delim"'/"\\\ ++"/g' >>$CONFIG_STATUS || ac_write_fail=1 ++ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ for (key in D) D_is_set[key] = 1 ++ FS = "" ++} ++/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { ++ line = \$ 0 ++ split(line, arg, " ") ++ if (arg[1] == "#") { ++ defundef = arg[2] ++ mac1 = arg[3] ++ } else { ++ defundef = substr(arg[1], 2) ++ mac1 = arg[2] ++ } ++ split(mac1, mac2, "(") #) ++ macro = mac2[1] ++ prefix = substr(line, 1, index(line, defundef) - 1) ++ if (D_is_set[macro]) { ++ # Preserve the white space surrounding the "#". ++ print prefix "define", macro P[macro] D[macro] ++ next ++ } else { ++ # Replace #undef with comments. This is necessary, for example, ++ # in the case of _POSIX_SOURCE, which is predefined and required ++ # on some systems where configure will not decide to define it. ++ if (defundef == "undef") { ++ print "/*", prefix defundef, macro, "*/" ++ next ++ } ++ } ++} ++{ print } ++_ACAWK + _ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++ { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 ++$as_echo "$as_me: error: could not setup config headers machinery" >&2;} ++ { (exit 1); exit 1; }; } ++fi # test -n "$CONFIG_HEADERS" ++ ++ ++eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" ++shift ++for ac_tag ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; + esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 ++$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift + +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. +- ac_dir=`(dirname "$ac_file") 2>/dev/null || ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ++ ac_file_inputs="$ac_file_inputs '$ac_f'" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input='Generated from '` ++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' ++ `' by configure.' ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 ++$as_echo "$as_me: creating $ac_file" >&6;} ++ fi ++ # Neutralize special characters interpreted by sed in replacement strings. ++ case $configure_input in #( ++ *\&* | *\|* | *\\* ) ++ ac_sed_conf_input=`$as_echo "$configure_input" | ++ sed 's/[\\\\&|]/\\\\&/g'`;; #( ++ *) ac_sed_conf_input=$configure_input;; ++ esac ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin" \ ++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 ++$as_echo "$as_me: error: could not create $ac_file" >&2;} ++ { (exit 1); exit 1; }; } ;; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + ac_builddir=. + +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac + ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; +- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac ++ ac_MKDIR_P=$MKDIR_P ++ case $MKDIR_P in ++ [\\/$]* | ?:[\\/]* ) ;; ++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; ++ esac ++_ACEOF + +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- configure_input= +- else +- configure_input="$ac_file. " +- fi +- configure_input=$configure_input"Generated from `echo $ac_file_in | +- sed 's,.*/,,'` by configure." +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- +- if test x"$ac_file" != x-; then +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- rm -f "$ac_file" +- fi ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++ac_sed_dataroot=' ++/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' ++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF +- sed "$ac_vpsub ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_sed_extra="$ac_vpsub + $extrasub + _ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s,@configure_input@,$configure_input,;t t +-s,@srcdir@,$ac_srcdir,;t t +-s,@abs_srcdir@,$ac_abs_srcdir,;t t +-s,@top_srcdir@,$ac_top_srcdir,;t t +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +-s,@builddir@,$ac_builddir,;t t +-s,@abs_builddir@,$ac_abs_builddir,;t t +-s,@top_builddir@,$ac_top_builddir,;t t +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +-s,@INSTALL@,$ac_INSTALL,;t t +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out +- rm -f $tmp/stdin +- if test x"$ac_file" != x-; then +- mv $tmp/out $ac_file +- else +- cat $tmp/out +- rm -f $tmp/out +- fi +- +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_HEADER section. +-# ++s|@configure_input@|$ac_sed_conf_input|;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@top_build_prefix@&$ac_top_build_prefix&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++s&@MKDIR_P@&$ac_MKDIR_P&;t t ++$ac_datarootdir_hack ++" ++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ ++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 ++$as_echo "$as_me: error: could not create $ac_file" >&2;} ++ { (exit 1); exit 1; }; } + +-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +-# NAME is the cpp macro being defined and VALUE is the value it is being given. +-# +-# ac_d sets the value in "#define NAME VALUE" lines. +-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +-ac_dB='[ ].*$,\1#\2' +-ac_dC=' ' +-ac_dD=',;t' +-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +-ac_uB='$,\1#\2define\3' +-ac_uC=' ' +-ac_uD=',;t' ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} + +-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ++ rm -f "$tmp/stdin" + case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; +- esac +- +- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- # Do quote $f, to prevent DOS paths from being IFS'd. +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} ++ -) cat "$tmp/out" && rm -f "$tmp/out";; ++ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; ++ esac \ ++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 ++$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- # Remove the trailing spaces. +- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in +- +-_ACEOF +- +-# Transform confdefs.h into two sed scripts, `conftest.defines' and +-# `conftest.undefs', that substitutes the proper values into +-# config.h.in to produce config.h. The first handles `#define' +-# templates, and the second `#undef' templates. +-# And first: Protect against being on the right side of a sed subst in +-# config.status. Protect against being in an unquoted here document +-# in config.status. +-rm -f conftest.defines conftest.undefs +-# Using a here document instead of a string reduces the quoting nightmare. +-# Putting comments in sed scripts is not portable. +-# +-# `end' is used to avoid that the second main sed command (meant for +-# 0-ary CPP macros) applies to n-ary macro definitions. +-# See the Autoconf documentation for `clear'. +-cat >confdef2sed.sed <<\_ACEOF +-s/[\\&,]/\\&/g +-s,[\\$`],\\&,g +-t clear +-: clear +-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +-t end +-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +-: end +-_ACEOF +-# If some macros were called several times there might be several times +-# the same #defines, which is useless. Nevertheless, we may not want to +-# sort them, since we want the *last* AC-DEFINE to be honored. +-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +-rm -f confdef2sed.sed +- +-# This sed command replaces #undef with comments. This is necessary, for +-# example, in the case of _POSIX_SOURCE, which is predefined and required +-# on some systems where configure will not decide to define it. +-cat >>conftest.undefs <<\_ACEOF +-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +-_ACEOF +- +-# Break up conftest.defines because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +-echo ' :' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.defines >/dev/null +-do +- # Write a limited-size here document to $tmp/defines.sed. +- echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS +- # Speed up: don't consider the non `#define' lines. +- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/defines.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail +- rm -f conftest.defines +- mv conftest.tail conftest.defines +-done +-rm -f conftest.defines +-echo ' fi # grep' >>$CONFIG_STATUS +-echo >>$CONFIG_STATUS +- +-# Break up conftest.undefs because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.undefs >/dev/null +-do +- # Write a limited-size here document to $tmp/undefs.sed. +- echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS +- # Speed up: don't consider the non `#undef' +- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/undefs.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail +- rm -f conftest.undefs +- mv conftest.tail conftest.undefs +-done +-rm -f conftest.undefs +- +-cat >>$CONFIG_STATUS <<\_ACEOF +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- echo "/* Generated by configure. */" >$tmp/config.h +- else +- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h +- fi +- cat $tmp/in >>$tmp/config.h +- rm -f $tmp/in ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # + if test x"$ac_file" != x-; then +- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then +- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +-echo "$as_me: $ac_file is unchanged" >&6;} ++ { ++ $as_echo "/* $configure_input */" \ ++ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" ++ } >"$tmp/config.h" \ ++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 ++$as_echo "$as_me: error: could not create $ac_file" >&2;} ++ { (exit 1); exit 1; }; } ++ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then ++ { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 ++$as_echo "$as_me: $ac_file is unchanged" >&6;} + else +- ac_dir=`(dirname "$ac_file") 2>/dev/null || +-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X\(//\)[^/]' \| \ +- X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- +- rm -f $ac_file +- mv $tmp/config.h $ac_file ++ rm -f "$ac_file" ++ mv "$tmp/config.h" "$ac_file" \ ++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 ++$as_echo "$as_me: error: could not create $ac_file" >&2;} ++ { (exit 1); exit 1; }; } + fi + else +- cat $tmp/config.h +- rm -f $tmp/config.h ++ $as_echo "/* $configure_input */" \ ++ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ ++ || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 ++$as_echo "$as_me: error: could not create -" >&2;} ++ { (exit 1); exit 1; }; } + fi +-# Compute $ac_file's index in $config_headers. ++# Compute "$ac_file"'s index in $config_headers. ++_am_arg="$ac_file" + _am_stamp_count=1 + for _am_header in $config_headers :; do + case $_am_header in +- $ac_file | $ac_file:* ) ++ $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done +-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || +-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X$ac_file : 'X\(//\)[^/]' \| \ +- X$ac_file : 'X\(//\)$' \| \ +- X$ac_file : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X$ac_file | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'`/stamp-h$_am_stamp_count +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_COMMANDS section. +-# +-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue +- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` +- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_dir=`(dirname "$ac_dest") 2>/dev/null || +-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_dest" : 'X\(//\)[^/]' \| \ +- X"$ac_dest" : 'X\(//\)$' \| \ +- X"$ac_dest" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_dest" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- +- ac_builddir=. +- +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi +- +-case $srcdir in +- .) # No --srcdir option. We are building in place. +- ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. +- ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac ++echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || ++$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$_am_arg" : 'X\(//\)[^/]' \| \ ++ X"$_am_arg" : 'X\(//\)$' \| \ ++ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$_am_arg" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac ++ :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++$as_echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac + + +- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +-echo "$as_me: executing $ac_dest commands" >&6;} +- case $ac_dest in +- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. +@@ -5031,100 +5950,137 @@ + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. +- # So let's grep whole file. +- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then +- dirpart=`(dirname "$mf") 2>/dev/null || ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || + $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ +- X"$mf" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$mf" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + else + continue + fi +- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue +- # Extract the definition of DEP_FILES from the Makefile without +- # running `make'. +- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n -e '/^U = / s///p' < "$mf"` +- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" +- # We invoke sed twice because it is the simplest approach to +- # changing $(DEPDIR) to its actual value in the expansion. +- for file in `sed -n -e ' +- /^DEP_FILES = .*\\\\$/ { +- s/^DEP_FILES = // +- :loop +- s/\\\\$// +- p +- n +- /\\\\$/ b loop +- p +- } +- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue +- fdir=`(dirname "$file") 2>/dev/null || ++ fdir=`$as_dirname -- "$file" || + $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ +- X"$file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p $dirpart/$fdir +- else +- as_dir=$dirpart/$fdir ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 +-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done + ;; ++ + esac +-done +-_ACEOF ++done # for ac_tag + +-cat >>$CONFIG_STATUS <<\_ACEOF + + { (exit 0); exit 0; } + _ACEOF + chmod +x $CONFIG_STATUS + ac_clean_files=$ac_clean_files_save + ++test $ac_write_fail = 0 || ++ { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 ++$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ + + # configure is writing to config.log, and then calls config.status. + # config.status does its own redirection, appending to config.log. +@@ -5146,5 +6102,9 @@ + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } + fi ++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then ++ { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 ++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} ++fi + + +diff -Naur tuneit-0.3/configure.in tuneit-0.3.patched/configure.in +--- tuneit-0.3/configure.in 2005-01-27 12:07:06.000000000 -0500 ++++ tuneit-0.3.patched/configure.in 2009-12-25 13:40:33.000000000 -0500 +@@ -7,7 +7,18 @@ + AC_PROG_INSTALL + AC_CHECK_LIB([asound], [snd_pcm_open], , [AC_MSG_ERROR([Couldn't find ALSA soundcard drivers. You must install these first. See www.alsa-project.org or use ALSA modules in linux kernel version 2.6])]) + AC_CHECK_LIB([fftw3f], [fftwf_plan_dft_r2c_1d], , [AC_MSG_ERROR([Couldn't find FFTW3 library. You must install it first.])]) +-AC_CHECK_LIB([jack], [jack_client_new], , [AC_MSG_ERROR([Couldn't find JACK library. You must install it first.])]) ++AC_MSG_CHECKING(whether to enable JACK) ++AC_ARG_ENABLE(jack, ++ AC_HELP_STRING([--enable-jack],[turn on JACK support (default=yes)]), ++ [enable_jack=$enableval],[enable_jack=yes]) ++if test "x$enable_jack" = "xyes"; then ++ AC_MSG_RESULT(yes) ++ CFLAGS="$CFLAGS -DHAVE_JACK" ++ AC_CHECK_HEADER(jack/jack.h,,AC_MSG_ERROR([JACK headers not found.])) ++ AC_CHECK_LIB(jack, main,,AC_MSG_ERROR([JACK library not found.])) ++else ++ AC_MSG_RESULT(no) ++fi + AC_CHECK_HEADER([alsa/asoundlib.h], , [AC_MSG_ERROR([Couldn't find alsa header files. You must install this first. Debian users apt-get install alsa-headers])]) + AC_OUTPUT(Makefile src/Makefile) + +diff -Naur tuneit-0.3/src/Makefile.in tuneit-0.3.patched/src/Makefile.in +--- tuneit-0.3/src/Makefile.in 2005-01-27 14:37:25.000000000 -0500 ++++ tuneit-0.3.patched/src/Makefile.in 2009-12-25 13:40:33.000000000 -0500 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.7.9 from Makefile.am. ++# Makefile.in generated by automake 1.10.1 from Makefile.am. + # @configure_input@ + +-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +-# Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,16 +14,11 @@ + + @SET_MAKE@ + +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +-top_builddir = .. +- + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +-INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,9 +30,38 @@ + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : ++bin_PROGRAMS = tuneit$(EXEEXT) ++subdir = src ++DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" ++binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) ++PROGRAMS = $(bin_PROGRAMS) ++am_tuneit_OBJECTS = tuneit.$(OBJEXT) ++tuneit_OBJECTS = $(am_tuneit_OBJECTS) ++tuneit_LDADD = $(LDADD) ++DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++depcomp = $(SHELL) $(top_srcdir)/depcomp ++am__depfiles_maybe = depfiles ++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ ++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++CCLD = $(CC) ++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++SOURCES = $(tuneit_SOURCES) ++DIST_SOURCES = $(tuneit_SOURCES) ++man1dir = $(mandir)/man1 ++NROFF = nroff ++MANS = $(man_MANS) ++ETAGS = etags ++CTAGS = ctags ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ +-AMDEP_FALSE = @AMDEP_FALSE@ +-AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AUTOCONF = @AUTOCONF@ + AUTOHEADER = @AUTOHEADER@ +@@ -56,6 +80,8 @@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -65,6 +91,7 @@ + LIBS = @LIBS@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ ++MKDIR_P = @MKDIR_P@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +@@ -77,84 +104,93 @@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_STRIP = @ac_ct_STRIP@ +-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ + bindir = @bindir@ + build_alias = @build_alias@ ++builddir = @builddir@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host_alias = @host_alias@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ ++mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-bin_PROGRAMS = tuneit ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ + tuneit_SOURCES = tuneit.c tuneit.1 + man_MANS = tuneit.1 +-subdir = src +-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = $(top_builddir)/config.h +-CONFIG_CLEAN_FILES = +-bin_PROGRAMS = tuneit$(EXEEXT) +-PROGRAMS = $(bin_PROGRAMS) +- +-am_tuneit_OBJECTS = tuneit.$(OBJEXT) +-tuneit_OBJECTS = $(am_tuneit_OBJECTS) +-tuneit_LDADD = $(LDADD) +-tuneit_DEPENDENCIES = +-tuneit_LDFLAGS = +- +-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +-depcomp = $(SHELL) $(top_srcdir)/depcomp +-am__depfiles_maybe = depfiles +-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/tuneit.Po +-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ +- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-CCLD = $(CC) +-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +-DIST_SOURCES = $(tuneit_SOURCES) +- +-NROFF = nroff +-MANS = $(man_MANS) +-DIST_COMMON = $(srcdir)/Makefile.in Makefile.am +-SOURCES = $(tuneit_SOURCES) +- + all: all-am + + .SUFFIXES: + .SUFFIXES: .c .o .obj +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu src/Makefile +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(bindir) ++ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ +- $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \ ++ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ ++ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ + else :; fi; \ + done + +@@ -162,18 +198,18 @@ + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ +- rm -f $(DESTDIR)$(bindir)/$$f; \ ++ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(bindir)/$$f"; \ + done + + clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + tuneit$(EXEEXT): $(tuneit_OBJECTS) $(tuneit_DEPENDENCIES) + @rm -f tuneit$(EXEEXT) +- $(LINK) $(tuneit_LDFLAGS) $(tuneit_OBJECTS) $(tuneit_LDADD) $(LIBS) ++ $(LINK) $(tuneit_OBJECTS) $(tuneit_LDADD) $(LIBS) + + mostlyclean-compile: +- -rm -f *.$(OBJEXT) core *.core ++ -rm -f *.$(OBJEXT) + + distclean-compile: + -rm -f *.tab.c +@@ -181,32 +217,21 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tuneit.Po@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ +-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ +-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ +-@am__fastdepCC_TRUE@ fi ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ +-@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ +-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ +-@am__fastdepCC_TRUE@ fi ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` ++@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` +-uninstall-info-am: +- +-man1dir = $(mandir)/man1 ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + install-man1: $(man1_MANS) $(man_MANS) + @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(man1dir) ++ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ +@@ -225,8 +250,8 @@ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ +- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ +- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ ++ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ ++ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ + done + uninstall-man1: + @$(NORMAL_UNINSTALL) +@@ -246,26 +271,19 @@ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ +- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ +- rm -f $(DESTDIR)$(man1dir)/$$inst; \ ++ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ ++ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ + done + +-ETAGS = etags +-ETAGSFLAGS = +- +-CTAGS = ctags +-CTAGSFLAGS = +- +-tags: TAGS +- + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique ++tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +@@ -275,23 +293,23 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$tags$$unique" \ +- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique +- ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ +- here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -303,28 +321,23 @@ + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +- +-top_distdir = .. +-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ +- list='$(DISTFILES)'; for file in $$list; do \ +- case $$file in \ +- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ +- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ +- esac; \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ +- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ +- dir="/$$dir"; \ +- $(mkinstalldirs) "$(distdir)$$dir"; \ +- else \ +- dir=''; \ +- fi; \ + if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -338,9 +351,10 @@ + check-am: all-am + check: check-am + all-am: Makefile $(PROGRAMS) $(MANS) +- + installdirs: +- $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) ++ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ ++ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ done + install: install-am + install-exec: install-exec-am + install-data: install-data-am +@@ -360,7 +374,7 @@ + clean-generic: + + distclean-generic: +- -rm -f $(CONFIG_CLEAN_FILES) ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -379,18 +393,28 @@ + + dvi-am: + ++html: html-am ++ + info: info-am + + info-am: + + install-data-am: install-man + ++install-dvi: install-dvi-am ++ + install-exec-am: install-binPROGRAMS + ++install-html: install-html-am ++ + install-info: install-info-am + + install-man: install-man1 + ++install-pdf: install-pdf-am ++ ++install-ps: install-ps-am ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -410,20 +434,24 @@ + + ps-am: + +-uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man ++uninstall-am: uninstall-binPROGRAMS uninstall-man + + uninstall-man: uninstall-man1 + ++.MAKE: install-am install-strip ++ + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic ctags distclean distclean-compile \ +- distclean-generic distclean-tags distdir dvi dvi-am info \ +- info-am install install-am install-binPROGRAMS install-data \ +- install-data-am install-exec install-exec-am install-info \ +- install-info-am install-man install-man1 install-strip \ +- installcheck installcheck-am installdirs maintainer-clean \ +- maintainer-clean-generic mostlyclean mostlyclean-compile \ +- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ +- uninstall-am uninstall-binPROGRAMS uninstall-info-am \ ++ distclean-generic distclean-tags distdir dvi dvi-am html \ ++ html-am info info-am install install-am install-binPROGRAMS \ ++ install-data install-data-am install-dvi install-dvi-am \ ++ install-exec install-exec-am install-html install-html-am \ ++ install-info install-info-am install-man install-man1 \ ++ install-pdf install-pdf-am install-ps install-ps-am \ ++ install-strip installcheck installcheck-am installdirs \ ++ maintainer-clean maintainer-clean-generic mostlyclean \ ++ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \ ++ tags uninstall uninstall-am uninstall-binPROGRAMS \ + uninstall-man uninstall-man1 + + # Tell versions [3.59,3.63) of GNU make to not export all variables. +diff -Naur tuneit-0.3/src/tuneit.c tuneit-0.3.patched/src/tuneit.c +--- tuneit-0.3/src/tuneit.c 2005-01-27 13:59:25.000000000 -0500 ++++ tuneit-0.3.patched/src/tuneit.c 2009-12-25 13:41:36.000000000 -0500 +@@ -443,6 +443,7 @@ + alsaInit, alsaListPorts, alsaOpen, alsaRun, alsaClose, alsaFree + }; + ++#ifdef HAVE_JACK + #include <jack/jack.h> + #include <jack/ringbuffer.h> + +@@ -577,6 +578,7 @@ + static const AudioInterface jackInterface = { + jackInit, jackListPorts, jackOpen, jackRun, jackClose, jackFree + }; ++#endif + + int main(int argc, char *argv[]) + { +@@ -596,7 +598,12 @@ + listAndExit = 1; + break; + case 'j': ++#ifdef HAVE_JACK + audio = &jackInterface; ++#else ++ fprintf(stderr, "%s: This binary was built without JACK support\n", argv[0]); ++ exit(EXIT_FAILURE); ++#endif + break; + case 'l': + latency = atoi(optarg); +@@ -612,7 +619,9 @@ + fprintf(stderr, "Valid options:\n"); + fprintf(stderr, "\t-f\t\tUse the more CPU intensive FFT based algorithm\n"); + fprintf(stderr, "\t-i\t\tList available input ports and exit\n"); ++#ifdef HAVE_JACK + fprintf(stderr, "\t-j\t\tUse JACK as the audio transport system\n"); ++#endif + fprintf(stderr, "\t-l LATENCY\tMeasurement window size in 1/N seconds (default is 10)\n"); + fprintf(stderr, "\t-r RATE\t\tSet sample rate (default is 48000)\n"); + fprintf(stderr, "\t-t HERTZ\tTune the A note of the scale (default is 440.0)\n"); diff --git a/audio/tuneit/slack-desc b/audio/tuneit/slack-desc new file mode 100644 index 0000000000..d3e8eed4de --- /dev/null +++ b/audio/tuneit/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +tuneit: tuneit (A simple command-line instrument tuner) +tuneit: +tuneit: Tune-it uses two different algorithms for pitch detection. By default, +tuneit: a simple and fast Schmitt Trigger based algorithm is used to detect +tuneit: the fundamental frequency of an instrument. For better and more +tuneit: reliable results, there is an alternative FFT based algorithm which +tuneit: is much more CPU intensive. +tuneit: +tuneit: +tuneit: +tuneit: diff --git a/audio/tuneit/tuneit.SlackBuild b/audio/tuneit/tuneit.SlackBuild new file mode 100644 index 0000000000..db2fdad724 --- /dev/null +++ b/audio/tuneit/tuneit.SlackBuild @@ -0,0 +1,77 @@ +#!/bin/sh + +# Slackware build script for <tuneit> + +# Written by B. Watson (yalhcru@gmail.com) + +PRGNAM=tuneit +VERSION=${VERSION:-0.3} +ARCH=${ARCH:-i486} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +cd $PRGNAM-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Allow JACK to be optional instead of required (since the app is still +# useful when using ALSA only) +patch -p1 < $CWD/jack_optional.diff + +# Included man page was unfinished +patch -p1 < $CWD/fix_manpage.diff + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --enable-jack=${USE_JACK:-yes} \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --build=$ARCH-slackware-linux + +make +make install-strip DESTDIR=$PKG + +gzip -9 $PKG/usr/man/man?/*.? + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + AUTHORS COPYING NEWS README \ + $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/audio/tuneit/tuneit.info b/audio/tuneit/tuneit.info new file mode 100644 index 0000000000..c0a4b9701c --- /dev/null +++ b/audio/tuneit/tuneit.info @@ -0,0 +1,10 @@ +PRGNAM="tuneit" +VERSION="0.3" +HOMEPAGE="http://delysid.org/tuneit.html" +DOWNLOAD="http://delysid.org/tuneit-0.3.tar.gz" +MD5SUM="b22dcdc92982bcf56c4ae85d6b8e9b3b" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +MAINTAINER="B. Watson" +EMAIL="yalhcru@gmail.com" +APPROVED="rworkman" |