diff options
| -rw-r--r-- | office/remind/README | 35 | ||||
| -rw-r--r-- | office/remind/remind.SlackBuild | 186 | ||||
| -rw-r--r-- | office/remind/remind.info | 10 | ||||
| -rw-r--r-- | office/remind/slack-desc | 19 |
4 files changed, 250 insertions, 0 deletions
diff --git a/office/remind/README b/office/remind/README new file mode 100644 index 0000000000..88cfb6ffb9 --- /dev/null +++ b/office/remind/README @@ -0,0 +1,35 @@ +Remind is a sophisticated command-line calendar and alarm program +with a sophisticated scripting language and intelligent handling of +exceptions and holidays. + +There are several options to pass to this script at compile-time. +Some of these options can be changed at run-time through SET +commands, while others (language, date/time separators, character +set, and the -u option) must be chosen at compile-time. Pass these +using `VAR=value ./remind.SlackBuild`: +LANGUAGE=LANG (default: ENGLISH), set the language. See the SlackBuild +for possible language options. + +LAT_DEG=# (default: 45), set the latitudinal degrees +LAT_MIN=# (default: 24), set the latitudinal minutes +LAT_SEC=# (default: 0), set the latitudinal seconds +LON_DEG=# (default: 75), set the longitudinal degrees +LON_MIN=# (default: 39), set the longitudinal minutes +LON_SEC=# (default: 0), set the longitudinal seconds +LOCATION=location (default: Ottawa), set the location string +See the SlackBuild for more information on these variables. + +DEFAULT_PAGE=Letter|A4 (default: Letter), set the default page size +DATESEP=-|/ (default: -), set the date separator character +TIMESEP=:|. (default: :), set the time separator character + +CHARSET=ASCII|ISOLATIN1|ISOLATIN2|IBMEXTENDED|IBM852 +(default: ISOLATIN1), set the character set to use + +WANTU=yes|no (default: yes), enable/disable the -u option (which +runs remind with the uid and gid of the specified name) + +There are a number of graphical front-ends to remind. tkremind is +included, but requires tcllib (available from SlackBuilds.org) as +a run-time requirement. Using remind via the command-line (or via +other front-ends) does not require tcllib. diff --git a/office/remind/remind.SlackBuild b/office/remind/remind.SlackBuild new file mode 100644 index 0000000000..c8f1ea81f7 --- /dev/null +++ b/office/remind/remind.SlackBuild @@ -0,0 +1,186 @@ +#!/bin/sh + +# Slackware build script for Remind + +# Written by T3slider <t3slider@gmail.com> +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=remind +VERSION=${VERSION:-03.01.10} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i486 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +# Valid options for LANG are one of the following: +# ENGLISH, GERMAN, DUTCH, FINNISH, FRENCH, NORWEGIAN, DANISH, POLISH, BRAZPORT, +# ITALIAN, ROMANIAN, SPANISH, ICELANDIC +LANGUAGE=${LANGUAGE:-ENGLISH} + +# You can also pass your location via the following variables (this ensures that +# sunrise, sunset, etc. work as expected for your location): +# LAT_DEG, LAT_MIN, LAT_SEC, LON_DEG, LON_MIN, LON_SEC, LOCATION +# By default these point to Ottawa, Ontario. From custom.h: + +# LAT_DEG, LAT_MIN and LAT_SEC: Latitude of your location +# LON_DEG, LON_MIN and LON_SEC: Longitude of your location +# LOCATION: A string identifying your location. +# All latitude and longitude numbers should be positive for the +# northern and western hemisphere. If you live in the southern +# hemisphere, ALL latitude values should be negative. If you live +# in the eastern hemisphere, ALL longitude values should be negative. +# The default values are initially set to Ottawa, Ontario, Canada. +LAT_DEG=${LAT_DEG:-45} +LAT_MIN=${LAT_MIN:-24} +LAT_SEC=${LAT_SEC:-0} +LON_DEG=${LON_DEG:-75} +LON_MIN=${LON_MIN:-39} +LON_SEC=${LON_SEC:-0} +LOCATION=${LOCATION:-Ottawa} + +# Default page size to use for Rem2PS. Options are Letter or A4. +DEFAULT_PAGE=${DEFAULT_PAGE:-Letter} + +# Default date separator (this works for input only). Options are +# - or / +DATESEP=${DATESEP:--} + +# Default time separator. Options are : or . +TIMESEP=${TIMESEP:-:} + +# Character set to use. Options are ASCII, ISOLATIN1, ISOLATIN2, +# IBMEXTENDED, or IBM852. +CHARSET=${CHARSET:-ISOLATIN1} + +# If you do not want the -u option (which runs remind with the +# uid and gid of the specified name), pass "no" (without quotes) +# to this option. +WANTU=${WANTU:-yes} + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +cd $PRGNAM-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# You can also use Tcl/Tk's `wish` to configure and build remind graphically, +# but this is untested. If you wish to try, uncomment the following line: +#wish ./build.tk +# Note that this would also require commenting out everything up to (but NOT +# including) the "make install" line below, since that should (in theory) be +# done by the build.tk script. I don't know how this would affect the package +# directories. I would advise passing the options as variables without using +# wish unless you want to have fun. + +# Set the proper options from the options passed to this script. Sorry for +# the mess... +sed -i "s/^\(#define LANG \).*/\1$LANGUAGE/" src/lang.h +sed -i "s/^\(#define LAT_DEG \).*/\1$LAT_DEG/" src/custom.h +sed -i "s/^\(#define LAT_MIN \).*/\1$LAT_MIN/" src/custom.h +sed -i "s/^\(#define LAT_SEC \).*/\1$LAT_SEC/" src/custom.h +sed -i "s/^\(#define LON_DEG \).*/\1$LON_DEG/" src/custom.h +sed -i "s/^\(#define LON_MIN \).*/\1$LON_MIN/" src/custom.h +sed -i "s/^\(#define LON_SEC \).*/\1$LON_SEC/" src/custom.h +sed -i "s/^\(#define LOCATION \).*/\1\"$LOCATION\"/" src/custom.h +if [ "$DEFAULT_PAGE" = "A4" ]; then + sed -i 's|^#define DEFAULT_PAGE {"Letter", 612, 792}|/* & */|' src/custom.h + sed -i 's|^\(/\* \)\(#define DEFAULT_PAGE {"A4", 595, 842}\)\( \*/\)|\2|' src/custom.h +fi +if [ "$DATESEP" = "/" ]; then + sed -i "s|^#define DATESEP '-'|/* & */|" src/custom.h + sed -i "s|^\(/\* \)\(#define DATESEP '/'\)\( \*/\)|\2|" src/custom.h +fi +if [ "$TIMESEP" = "." ]; then + sed -i "s|^#define TIMESEP ':'|/* & */|" src/custom.h + sed -i "s|^\(/\* \)\(#define TIMESEP '\.'\)\( \*/\)|\2|" src/custom.h +fi +sed -i "s/^\(#define ISOLATIN1 \).*/\1 0/" src/custom.h +if [ "$CHARSET" != "ASCII" ]; then + sed -i "s/^\(#define $CHARSET \).*/\1 1/" src/custom.h +fi +if [ "$WANTU" = "no" ]; then + sed -i 's|^#define WANT_U_OPTION 1|/* & */|' src/custom.h +fi + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --build=$ARCH-slackware-linux + +make +make install DESTDIR=$PKG + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +find $PKG/usr/man -type f -exec gzip -9 {} \; +for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + COPYRIGHT MICROSOFT-AND-APPLE README \ + $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/office/remind/remind.info b/office/remind/remind.info new file mode 100644 index 0000000000..348e0f4bb9 --- /dev/null +++ b/office/remind/remind.info @@ -0,0 +1,10 @@ +PRGNAM="remind" +VERSION="03.01.10" +HOMEPAGE="http://www.roaringpenguin.com/products/remind" +DOWNLOAD="http://www.roaringpenguin.com/files/download/remind-03.01.10.tar.gz" +MD5SUM="f6f7829d3ac92e0d6d463c59b5e6ce3f" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +MAINTAINER="T3slider" +EMAIL="t3slider@gmail.com" +APPROVED="Niels Horn" diff --git a/office/remind/slack-desc b/office/remind/slack-desc new file mode 100644 index 0000000000..8fea13e995 --- /dev/null +++ b/office/remind/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +remind: remind (a command-line calendar) +remind: +remind: Remind is a sophisticated command-line calendar and alarm program +remind: with a sophisticated scripting language and intelligent handling of +remind: exceptions and holidays. +remind: +remind: There are a number of graphical front-ends to remind. tkremind is +remind: included. +remind: +remind: http://www.roaringpenguin.com/products/remind +remind: |