diff options
-rw-r--r-- | network/r8168/README | 12 | ||||
-rw-r--r-- | network/r8168/doinst.sh | 3 | ||||
-rw-r--r-- | network/r8168/r8168.SlackBuild | 91 | ||||
-rw-r--r-- | network/r8168/r8168.info | 10 | ||||
-rw-r--r-- | network/r8168/slack-desc | 19 |
5 files changed, 135 insertions, 0 deletions
diff --git a/network/r8168/README b/network/r8168/README new file mode 100644 index 0000000000..b3c7e01525 --- /dev/null +++ b/network/r8168/README @@ -0,0 +1,12 @@ +This is the Linux device driver released for RealTek RTL8168B/8111B, RTL8168C/8111C, +RTL8168CP/8111CP, RTL8168D/8111D, RTL8168DP/8111DP, and RTL8168E/8111E Gigabit +Ethernet controllers with PCI-Express interface. + +To build the module for a kernel that isn't currently running on the system pass +that kernel's "uname -r" ouput such as: KERNEL=4.4.0" ./r8168.SlackBuild + +To use this module blacklist the r8169 driver in /etc/modprobe.d/blacklist.conf: + +blacklist r8169 + +This will need to be rebuilt for every new kernel installed. diff --git a/network/r8168/doinst.sh b/network/r8168/doinst.sh new file mode 100644 index 0000000000..d335d682c8 --- /dev/null +++ b/network/r8168/doinst.sh @@ -0,0 +1,3 @@ +if [ -x sbin/depmod ]; then + chroot . /sbin/depmod -a @KERNEL@ 1> /dev/null 2> /dev/null +fi diff --git a/network/r8168/r8168.SlackBuild b/network/r8168/r8168.SlackBuild new file mode 100644 index 0000000000..b580d8e5f6 --- /dev/null +++ b/network/r8168/r8168.SlackBuild @@ -0,0 +1,91 @@ +#!/bin/sh + +# Slackware build script for r8168 + +# Copyright 2016 Hunter Sezen California, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=r8168 +VERSION=${VERSION:-8.041.00} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i486 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +KERNEL=${KERNEL:-$(uname -r)} +PKGVER=$(echo ${VERSION}_$KERNEL) + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz || tar xvf $CWD/$VERSION.tar.gz +cd $PRGNAM-$VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +make -C /lib/modules/$KERNEL/build \ + SUBDIRS="$TMP/$PRGNAM-$VERSION/src" \ + EXTRA_CFLAGS="$SLKCFLAGS" \ + modules + +install -Dm0644 src/$PRGNAM.ko \ + $PKG/lib/modules/$KERNEL/kernel/drivers/net/ethernet/realtek/$PRGNAM.ko + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a README $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$PKGVER-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/network/r8168/r8168.info b/network/r8168/r8168.info new file mode 100644 index 0000000000..8cf64324bd --- /dev/null +++ b/network/r8168/r8168.info @@ -0,0 +1,10 @@ +PRGNAM="r8168" +VERSION="8.041.00" +HOMEPAGE="https://github.com/mtorromeo/r8168" +DOWNLOAD="https://github.com/mtorromeo/r8168/archive/8.041.00.tar.gz" +MD5SUM="f2092a58f812c34a9071ffa985eab42d" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="" +MAINTAINER="Hunter Sezen" +EMAIL="ovariegata@yahoo.com" diff --git a/network/r8168/slack-desc b/network/r8168/slack-desc new file mode 100644 index 0000000000..64d7a016c6 --- /dev/null +++ b/network/r8168/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +r8168: r8168 (Linux device driver for Realtek Ethernet controllers) +r8168: +r8168: This is the Linux device driver released for RealTek RTL8168B/8111B, +r8168: RTL8168C/8111C, RTL8168CP/8111CP, RTL8168D/8111D, RTL8168DP/8111DP, +r8168: and RTL8168E/8111E Gigabit Ethernet controllers with PCI-Express +r8168: interface. +r8168: +r8168: Homepage: https://github.com/mtorromeo/r8168 +r8168: +r8168: +r8168: |