system/pycp: Added (cp and mv with a progressbar).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

4 files changed, 131 insertions, 0 deletions

diff --git a/system/pycp/README b/system/pycp/README
new file mode 100644
index 0000000000..5b31c1946b
--- /dev/null
+++ b/system/pycp/README
@@ -0,0 +1,7 @@
+pycp (cp and mv with a progressbar)
+
+pycp / pymv are meant to be used from the command line.
+
+pycp.pbar was heavily based on the wonderful library progressbar by Nilton Volpato.
+
+About usage... please check man page.
diff --git a/system/pycp/pycp.SlackBuild b/system/pycp/pycp.SlackBuild
new file mode 100644
index 0000000000..173679b2d6
--- /dev/null
+++ b/system/pycp/pycp.SlackBuild
@@ -0,0 +1,95 @@
+#!/bin/sh
+#
+# Slackware build script for pycp.
+#
+# Copyright 2015 Edinaldo P. Silva, Rio de Janeiro, Brazil.
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=pycp
+VERSION=${VERSION:-7.1}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+python setup.py install --root=$PKG --optimize=1
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+PYTHONPATH=. help2man --no-info --output pycp.1 $PKG/usr/bin/pycp
+PYTHONPATH=. help2man --no-info --output pymv.1 $PKG/usr/bin/pymv
+mkdir -p $PKG/usr/man/man1
+cp -a pycp.1 pymv.1 $PKG/usr/man/man1/
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+DOCS="COPYING.txt README.txt PKG-INFO"
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/pycp/pycp.info b/system/pycp/pycp.info
new file mode 100644
index 0000000000..f2722701f0
--- /dev/null
+++ b/system/pycp/pycp.info
@@ -0,0 +1,10 @@
+PRGNAM="pycp"
+VERSION="7.1"
+HOMEPAGE="https://github.com/yannicklm/pycp"
+DOWNLOAD="http://pypi.python.org/packages/source/p/pycp/pycp-7.1.tar.gz"
+MD5SUM="65a1ce3f035d109e947c1cb9a39732cc"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="pysetuptools"
+MAINTAINER="Edinaldo P. Silva"
+EMAIL="edps.mundognu@gmail.com"
diff --git a/system/pycp/slack-desc b/system/pycp/slack-desc
new file mode 100644
index 0000000000..20bffff170
--- /dev/null
+++ b/system/pycp/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+    |-----handy-ruler------------------------------------------------------|
+pycp: pycp (cp and mv with a progressbar)
+pycp:
+pycp: pycp / pymv are meant to be used from the command line.
+pycp:
+pycp: Home page: https://github.com/yannicklm/pycp
+pycp:
+pycp:
+pycp:
+pycp:
+pycp:
+pycp: