system/thermal_daemon: Removed (replaced with thermald).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

6 files changed, 0 insertions, 185 deletions

diff --git a/system/thermal_daemon/README b/system/thermal_daemon/README
deleted file mode 100644
index 6326501691..0000000000
--- a/system/thermal_daemon/README
+++ /dev/null
@@ -1,16 +0,0 @@
-The Linux Thermal Daemon program from 01.org
-
-Thermald deals with thermal issues for intel processor families 
-codenamed intel sandy-bridge and above.  It is a Linux daemon 
-used to prevent the overheating of systems.  This daemon monitors 
-temperature and applies compensation using available cooling methods.
-
-Prefers kernel with:
-  Intel RAPL power capping driver : Available from Linux kernel 3.13.rc1
-  Intel P State driver (Available in Linux kernel stable release)
-  Intel Power clamp driver (Available in Linux kernel stable release)
-
-  CONFIG_X86_MSR, so that x86 MSR can be read/write from user space
-  to control RAPL if no RAPL powecap class driver is not present.
-
-  If none of the above is available uses cpufreq to control P states.
diff --git a/system/thermal_daemon/README.Slackware b/system/thermal_daemon/README.Slackware
deleted file mode 100644
index b9882c4eca..0000000000
--- a/system/thermal_daemon/README.Slackware
+++ /dev/null
@@ -1,14 +0,0 @@
-Since this is a daemon, it can be started at boot via /etc/rc.d/rc.local:
-  /usr/sbin/thermald
-
-It might be necessary to create /var/run/thermald/ first (depending on your
-local system setup)
-
-An entry could be added to /etc/rc.d/rc.local_shutdown as well:
-  killall thermald
-
-CONFIG_X86_MSR is listed as an (optional) dependency, msr-tools
-can be installed from http://01.org/msr-tools via src2pkg (www.src2pkg.net/)
-
-If you installed a previous version of thermald, you may need to uninstall
-it and then install this one instead of using upgradepkg.
diff --git a/system/thermal_daemon/doinst.sh b/system/thermal_daemon/doinst.sh
deleted file mode 100644
index 120570687d..0000000000
--- a/system/thermal_daemon/doinst.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-config etc/thermald/thermal-conf.xml.new
-config etc/thermald/thermal-cpu-cdev-order.xml.new
diff --git a/system/thermal_daemon/slack-desc b/system/thermal_daemon/slack-desc
deleted file mode 100644
index 2b81f70827..0000000000
--- a/system/thermal_daemon/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-              |-----handy-ruler------------------------------------------------------|
-thermal_daemon: thermal_daemon (Linux Thermal Daemon)
-thermal_daemon:
-thermal_daemon: Thermal_daemon is a Linux daemon used to prevent system overheating.
-thermal_daemon: This daemon monitors temperature and applies compensation using
-thermal_daemon: available cooling methods.
-thermal_daemon:
-thermal_daemon: Project URL: https://github.com/01org/thermal_daemon
-thermal_daemon:
-thermal_daemon:
-thermal_daemon:
-thermal_daemon:
diff --git a/system/thermal_daemon/thermal_daemon.SlackBuild b/system/thermal_daemon/thermal_daemon.SlackBuild
deleted file mode 100644
index 2577970028..0000000000
--- a/system/thermal_daemon/thermal_daemon.SlackBuild
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for thermal_daemon
-
-# Copyright 2013-2016 Aaditya Bagga <aaditya_gnulinux@zoho.com>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=thermal_daemon
-VERSION=${VERSION:-1.5.4}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e	 
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-if [ -e $CWD/"v"$VERSION.tar.gz ]; then
- tar xvf $CWD/"v"$VERSION.tar.gz
-else
- tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-fi
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find -L . \
- \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
-  -o -perm 511 \) -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
- -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
-
-./autogen.sh
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --build=$ARCH-slackware-linux
-
-make
-make install DESTDIR=$PKG
-
-# Remove /etc/init but keep dbus config
-rm -r $PKG/etc/init
-
-# Don't clobber configs
-mv $PKG/etc/thermald/thermal-conf.xml $PKG/etc/thermald/thermal-conf.xml.new
-mv $PKG/etc/thermald/thermal-cpu-cdev-order.xml $PKG/etc/thermald/thermal-cpu-cdev-order.xml.new
-
-find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a COPYING README.txt $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/thermal_daemon/thermal_daemon.info b/system/thermal_daemon/thermal_daemon.info
deleted file mode 100644
index 71a6b46aee..0000000000
--- a/system/thermal_daemon/thermal_daemon.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="thermal_daemon"
-VERSION="1.5.4"
-HOMEPAGE="https://github.com/01org/thermal_daemon"
-DOWNLOAD="https://github.com/01org/thermal_daemon/archive/v1.5.4.tar.gz"
-MD5SUM="f7b63e691fb941c92e14ccfcb667b593"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="Aaditya Bagga"
-EMAIL="aaditya_gnulinux@zoho.com"