system/virtualbox-addons: Updated for version 5.0.14.

Signed-off-by: Heinz Wiesinger <pprkut@slackbuilds.org>

1 files changed, 202 insertions, 3 deletions

diff --git a/system/virtualbox-addons/rc.vboxadd.diff b/system/virtualbox-addons/rc.vboxadd.diff
index ca6cafd5be..929c25eeaf 100644
--- a/system/virtualbox-addons/rc.vboxadd.diff
+++ b/system/virtualbox-addons/rc.vboxadd.diff
@@ -1,6 +1,202 @@
---- vboxadd.sh.orig	2012-03-13 15:52:25.000000000 +0100
-+++ vboxadd.sh	2012-09-18 22:09:48.886085813 +0200
-@@ -480,60 +480,13 @@
+--- vboxadd.sh.orig	2016-01-19 17:40:04.000000000 +0100
++++ vboxadd.sh	2016-01-23 15:46:17.000000000 +0100
+@@ -146,42 +146,9 @@
+ 
+ dev=/dev/vboxguest
+ userdev=/dev/vboxuser
+-config=/var/lib/VBoxGuestAdditions/config
+ owner=vboxadd
+ group=1
+ 
+-test_for_gcc_and_make()
+-{
+-    which make > /dev/null 2>&1 || printf "\nThe make utility was not found. If the following module compilation fails then\nthis could be the reason and you should try installing it.\n"
+-    which gcc > /dev/null 2>&1 || printf "\nThe gcc utility was not found. If the following module compilation fails then\nthis could be the reason and you should try installing it.\n"
+-}
+-
+-test_sane_kernel_dir()
+-{
+-    KERN_VER=`uname -r`
+-    KERN_DIR="/lib/modules/$KERN_VER/build"
+-    if [ -d "$KERN_DIR" ]; then
+-        KERN_REL=`make -sC $KERN_DIR --no-print-directory kernelrelease 2>/dev/null || true`
+-        if [ -z "$KERN_REL" -o "x$KERN_REL" = "x$KERN_VER" ]; then
+-            return 0
+-        fi
+-    fi
+-    printf "\nThe headers for the current running kernel were not found. If the following\nmodule compilation fails then this could be the reason.\n"
+-    if [ "$system" = "redhat" ]; then
+-        if echo "$KERN_VER" | grep -q "uek"; then
+-            printf "The missing package can be probably installed with\nyum install kernel-uek-devel-$KERN_VER\n"
+-        else
+-            printf "The missing package can be probably installed with\nyum install kernel-devel-$KERN_VER\n"
+-        fi
+-    elif [ "$system" = "suse" ]; then
+-        KERN_VER_SUSE=`echo "$KERN_VER" | sed 's/.*-\([^-]*\)/\1/g'`
+-        KERN_VER_BASE=`echo "$KERN_VER" | sed 's/\(.*\)-[^-]*/\1/g'`
+-        printf "The missing package can be probably installed with\nzypper install kernel-$KERN_VER_SUSE-devel-$KERN_VER_BASE\n"
+-    elif [ "$system" = "debian" ]; then
+-        printf "The missing package can be probably installed with\napt-get install linux-headers-$KERN_VER\n"
+-    fi
+-}
+-
+ running_vboxguest()
+ {
+     lsmod | grep -q "vboxguest[^_-]"
+@@ -253,13 +220,6 @@
+ start()
+ {
+     begin "Starting the VirtualBox Guest Additions ";
+-    if test -r $config; then
+-      . $config
+-    else
+-      fail "Configuration file $config not found"
+-    fi
+-    test -n "$INSTALL_DIR" -a -n "$INSTALL_VER" ||
+-      fail "Configuration file $config not complete"
+     uname -r | grep -q -E '^2\.6|^3|^4' 2>/dev/null &&
+         ps -A -o comm | grep -q '/*udevd$' 2>/dev/null ||
+         no_udev=1
+@@ -331,202 +291,16 @@
+     return 0
+ }
+ 
+-# Remove any existing VirtualBox guest kernel modules from the disk, but not
+-# from the kernel as they may still be in use
+-cleanup_modules()
+-{
+-    if [ -n "$(which dkms 2>/dev/null)" ]; then
+-        begin "Removing existing VirtualBox DKMS kernel modules"
+-        $DODKMS uninstall $OLDMODULES > $LOG
+-        succ_msg
+-    fi
+-    begin "Removing existing VirtualBox non-DKMS kernel modules"
+-    for i in $OLDMODULES; do
+-        find /lib/modules -name $i\* | xargs rm 2>/dev/null
+-    done
+-    succ_msg
+-}
+-
+-# Build and install the VirtualBox guest kernel modules
+-setup_modules()
+-{
+-    # don't stop the old modules here -- they might be in use
+-    cleanup_modules
+-    begin "Building the VirtualBox Guest Additions kernel modules"
+-
+-    # Short cut out if a dkms build succeeds
+-    if [ -n "$(which dkms 2>/dev/null)" ] &&
+-       $DODKMS install vboxguest $INSTALL_VER >> $LOG 2>&1; then
+-        succ_msg
+-        return 0
+-    fi
+-
+-    test_for_gcc_and_make
+-    test_sane_kernel_dir
+-
+-    echo
+-    begin "Building the main Guest Additions module"
+-    if ! $BUILDINTMP \
+-        --save-module-symvers /tmp/vboxguest-Module.symvers \
+-        --module-source $MODULE_SRC/vboxguest \
+-        --no-print-directory install >> $LOG 2>&1; then
+-        show_error "Look at $LOG to find out what went wrong"
+-        return 1
+-    fi
+-    succ_msg
+-    begin "Building the shared folder support module"
+-    if ! $BUILDINTMP \
+-        --use-module-symvers /tmp/vboxguest-Module.symvers \
+-        --module-source $MODULE_SRC/vboxsf \
+-        --no-print-directory install >> $LOG 2>&1; then
+-        show_error  "Look at $LOG to find out what went wrong"
+-        return 1
+-    fi
+-    succ_msg
+-    if expr `uname -r` '<' '2.6.27' > /dev/null; then
+-        echo "Not building the VirtualBox advanced graphics driver as this Linux version is"
+-        echo "too old to use it."
+-    else
+-        begin "Building the OpenGL support module"
+-        if ! $BUILDINTMP \
+-            --use-module-symvers /tmp/vboxguest-Module.symvers \
+-            --module-source $MODULE_SRC/vboxvideo \
+-            --no-print-directory install >> $LOG 2>&1; then
+-            show_error "Look at $LOG to find out what went wrong. The module is not built but the others are."
+-        else
+-            succ_msg
+-        fi
+-    fi
+-    depmod
+-    return 0
+-}
+-
+-# Do non-kernel bits needed for the kernel modules to work properly (user
+-# creation, udev, mount helper...)
+-extra_setup()
+-{
+-    begin "Doing non-kernel setup of the Guest Additions"
+-    echo "Creating user for the Guest Additions." >> $LOG
+-    # This is the LSB version of useradd and should work on recent
+-    # distributions
+-    useradd -d /var/run/vboxadd -g 1 -r -s /bin/false vboxadd >/dev/null 2>&1
+-    # And for the others, we choose a UID ourselves
+-    useradd -d /var/run/vboxadd -g 1 -u 501 -o -s /bin/false vboxadd >/dev/null 2>&1
+-
+-    # Add a group "vboxsf" for Shared Folders access
+-    # All users which want to access the auto-mounted Shared Folders have to
+-    # be added to this group.
+-    groupadd -r -f vboxsf >/dev/null 2>&1
+-
+-    # Create udev description file
+-    if [ -d /etc/udev/rules.d ]; then
+-        echo "Creating udev rule for the Guest Additions kernel module." >> $LOG
+-        udev_call=""
+-        udev_app=`which udevadm 2> /dev/null`
+-        if [ $? -eq 0 ]; then
+-            udev_call="${udev_app} version 2> /dev/null"
+-        else
+-            udev_app=`which udevinfo 2> /dev/null`
+-            if [ $? -eq 0 ]; then
+-                udev_call="${udev_app} -V 2> /dev/null"
+-            fi
+-        fi
+-        udev_fix="="
+-        if [ "${udev_call}" != "" ]; then
+-            udev_out=`${udev_call}`
+-            udev_ver=`expr "$udev_out" : '[^0-9]*\([0-9]*\)'`
+-            if [ "$udev_ver" = "" -o "$udev_ver" -lt 55 ]; then
+-               udev_fix=""
+-            fi
+-        fi
+-        ## @todo 60-vboxadd.rules -> 60-vboxguest.rules ?
+-        echo "KERNEL=${udev_fix}\"vboxguest\", NAME=\"vboxguest\", OWNER=\"vboxadd\", MODE=\"0660\"" > /etc/udev/rules.d/60-vboxadd.rules
+-        echo "KERNEL=${udev_fix}\"vboxuser\", NAME=\"vboxuser\", OWNER=\"vboxadd\", MODE=\"0666\"" >> /etc/udev/rules.d/60-vboxadd.rules
+-    fi
+-
+-    # Put mount.vboxsf in the right place
+-    ln -sf "$lib_path/$PACKAGE/mount.vboxsf" /sbin
+-    # And an rc file to re-build the kernel modules and re-set-up the X server.
+-    ln -sf "$lib_path/$PACKAGE/vboxadd" /sbin/rcvboxadd
+-    ln -sf "$lib_path/$PACKAGE/vboxadd-x11" /sbin/rcvboxadd-x11
+-    # At least Fedora 11 and Fedora 12 require the correct security context when
+-    # executing this command from service scripts. Shouldn't hurt for other
+-    # distributions.
+-    chcon -u system_u -t mount_exec_t "$lib_path/$PACKAGE/mount.vboxsf" > /dev/null 2>&1
+-    # And at least Fedora 15 needs this for the acceleration support check to
+-    # work
+-    redhat_release=`cat /etc/redhat-release 2> /dev/null`
+-    case "$redhat_release" in Fedora\ release\ 15* )
+-        for i in "$lib_path"/*.so
+-        do
+-            restorecon "$i" >/dev/null
+-        done
+-        ;;
+-    esac
+-
+-    succ_msg
+-}
+-
  # setup_script
  setup()
  {
@@ -14,6 +210,7 @@
 -    export BUILD_TYPE
 -    export USERNAME
 -
+-    rm -f $LOG
 -    MODULE_SRC="$INSTALL_DIR/src/vboxguest-$INSTALL_VER"
 -    BUILDINTMP="$MODULE_SRC/build_in_tmp"
 -    DODKMS="$MODULE_SRC/do_dkms"
@@ -58,6 +255,8 @@
 -
 -    # Remove other files
 -    rm /sbin/mount.vboxsf 2>/dev/null
+-    rm /sbin/rcvboxadd 2>/dev/null
+-    rm /sbin/rcvboxadd-x11 2>/dev/null
 -    rm /etc/udev/rules.d/60-vboxadd.rules 2>/dev/null
 +    echo "Not implemented! Please use removepkg or pkgtool to remove virtualbox-addons and/or virtualbox-kernel-addons instead."
  }