system/runit-services: Added (services to use with runit).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

5 files changed, 136 insertions, 0 deletions

diff --git a/system/runit-services/README b/system/runit-services/README
new file mode 100644
index 0000000000..8def46259e
--- /dev/null
+++ b/system/runit-services/README
@@ -0,0 +1,11 @@
+Contains various services for using with runit.
+
+The services are installed in /etc/sv.
+
+To enable a service, simply symlink it to your service directory, ie,
+/service or /var/service.
+
+Service logging is done via runit's svlogd or via syslog
+as applicable.
+
+Check the project homepage for more information.
diff --git a/system/runit-services/doinst.sh b/system/runit-services/doinst.sh
new file mode 100644
index 0000000000..55e9fb3f73
--- /dev/null
+++ b/system/runit-services/doinst.sh
@@ -0,0 +1,25 @@
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+CONF_FILES=$()
+while IFS= read -r -d ''; do
+  CONF_FILES+=( "$REPLY" )
+done < <(find -L etc/sv -type f -name conf.new -print0)
+
+for conf_file in "${CONF_FILES[@]}"; do
+  if [ "$conf_file" != '' ]; then
+    config "${conf_file}"
+  fi
+done
+
diff --git a/system/runit-services/runit-services.SlackBuild b/system/runit-services/runit-services.SlackBuild
new file mode 100644
index 0000000000..c5674fc7e7
--- /dev/null
+++ b/system/runit-services/runit-services.SlackBuild
@@ -0,0 +1,71 @@
+#!/bin/sh
+
+# Slackware build script for runit-services
+
+# Copyright 2019 Aaditya Bagga <aaditya_gnulinux@zoho.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=runit-services
+VERSION=${VERSION:-20190910}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+ARCH=noarch
+
+CWD=${CWD:-$(pwd)}
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# Install
+make install DESTDIR="$PKG"
+
+# Fix some things
+# ntp user does not exist in 14.2
+sed -i 's/ntp:daemon/daemon:adm/' -i "${PKG}/etc/sv/ntpd/log/conf"
+echo "NTPD_USER=root  # for slack 14.2" >> "${PKG}/etc/sv/ntpd/conf"
+
+# Backup config files
+find -L "${PKG}/etc/sv" -type f -name conf -exec mv {} {}.new \;
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/runit-services/runit-services.info b/system/runit-services/runit-services.info
new file mode 100644
index 0000000000..4af7b8493f
--- /dev/null
+++ b/system/runit-services/runit-services.info
@@ -0,0 +1,10 @@
+PRGNAM="runit-services"
+VERSION="20190910"
+HOMEPAGE="https://github.com/aadityabagga/runit-services"
+DOWNLOAD="https://github.com/aadityabagga/runit-services/archive/20190910/runit-services-20190910.tar.gz"
+MD5SUM="48c365aa57c740d3f37b6fccf575dc9a"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="runit pause"
+MAINTAINER="Aaditya Bagga"
+EMAIL="aaditya_gnulinux@zoho.com"
diff --git a/system/runit-services/slack-desc b/system/runit-services/slack-desc
new file mode 100644
index 0000000000..361d60d4b0
--- /dev/null
+++ b/system/runit-services/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+runit-services: runit-services (services to use with runit)
+runit-services:
+runit-services: This package contains runit run scripts for services like
+runit-services: syslogd, crond, dbus, dhcpcd, etc.
+runit-services:
+runit-services: The script collection comprises packages both in Slackware
+runit-services: repository and addtional repositories like slackbuilds.org.
+runit-services:
+runit-services: Service logging is done via runit's svlogd or via syslog
+runit-services: as applicable.
+runit-services: