system/pucrunch: Added (Hybrid Compressor).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

1 files changed, 223 insertions, 0 deletions

diff --git a/system/pucrunch/pucrunch.1 b/system/pucrunch/pucrunch.1
new file mode 100644
index 0000000000..e74f0c3c76
--- /dev/null
+++ b/system/pucrunch/pucrunch.1
@@ -0,0 +1,223 @@
+.\" Man page generated from reStructuredText.
+.
+.TH PUCRUNCH 1 "2017-09-06" "20081122" "SlackBuilds.org"
+.SH NAME
+pucrunch \- compressor optimized for low-resource decompression
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.\" RST source for pucrunch(1) man page. Convert with:
+.
+.\" rst2man.py pucrunch.rst > pucrunch.1
+.
+.\" rst2man.py comes from the SBo development/docutils package.
+.
+.\" converting from pod:
+.
+.\" s/B<\([^>]*\)>/**\1**/g
+.
+.\" s/I<\([^>]*\)>/*\1*/g
+.
+.SH SYNOPSIS
+.sp
+pucrunch [\fI\-options\fP] [\fIinfile]\fP [\fIoutfile\fP]]
+.SH DESCRIPTION
+.sp
+Pucrunch is a Hybrid LZ77 and RLE compressor, uses an Elias Gamma Code
+for lengths, mixture of Gamma Code and linear for LZ77 offset, and
+ranked RLE bytes indexed by the same Gamma Code. Uses no extra memory
+in decompression.
+.sp
+Input files can be arbitrary data (with \fI\-d\fP option) or executables for
+Commodore 64, VIC\-20, C16, or Plus/4. Output is either a self\-extracting
+compressed Commodore executable, or a compressed data file suitable for
+extracting via \fIpucrunch \-u\fP or the included decompressor routines. See
+/usr/doc/pucrunch\-20081122/examples/*.asm for 6502, 6809, and Z80
+assembly code implementations of the decompressor.
+.sp
+Note: Because pucrunch contains both RLE and LZ77 and they are
+specifically designed to work together, DO NOT RLE\-pack your files
+first, because it will decrease the overall compression ratio.
+.SH OPTIONS
+.sp
+Pucrunch expects any number of options and up to two filenames. If you
+only give one filename, the compressed file is written to the stardard
+output. If you leave out both filenames, the input is in addition
+read from the standard input. Options needing no value can be grouped
+together. All values can be given in decimal (no prefix), octal (prefix
+0), or hexadecimal (prefix $ or 0x). [\fINote\fP: escape the \fI$\fP with quotes
+or a backslash, to avoid your shell treating it as a metacharacter]
+.sp
+Example: pucrunch demo.prg demo.pck \-m6 \-fs \-p2 \-x0xc010
+.INDENT 0.0
+.TP
+.B \fB\-c<machine>\fP
+Selects the machine. Possible values are 128 (C128), 64 (C64),
+20 (VIC20), 16 (C16/Plus4), 0 (standalone). The default is 64, i.e.
+Commodore 64.
+.sp
+If you use \-c0, a file without the embedded decompression code
+is produced. This can be decompressed with a standalone routine
+and of course with pucrunch itself. Options marked with [\fISFX\fP]
+have no effect if \-c0 is used.
+.sp
+The 128\-mode is not fully developed yet. Currently it overwrites
+memory locations $f7\-$f9 (Text mode lockout, Scrolling, and Bell
+settings) without restoring them later.
+.TP
+.B \fB\-a\fP
+[\fISFX\fP] Avoids video matrix if possible. Only affects VIC20 mode.
+.TP
+.B \fB\-d\fP
+[\fISFX\fP] Indicates that the file does not have a load address. A load
+address can be specified with \-l option. The default load
+address if none is specified is 0x258.
+.TP
+.B \fB\-l<addr>\fP
+[\fISFX\fP] Overrides the file load address or sets it for data files.
+.TP
+.B \fB\-x<addr>\fP
+[\fISFX\fP] Sets the execution address or overrides automatically detected
+execution address. Pucrunch checks whether a SYS\-line is present
+and tries to decode the address. Plain decimal addresses and
+addresses in parenthesis are read correctly, otherwise you need
+to override any incorrect value with this option.
+.TP
+.B \fB\-e<val>\fP
+Fixes the number of escape bits used. You don\(aqt usually need or
+want to use this option.
+.TP
+.B \fB\-r<val>\fP
+Sets the LZ77 search range. By specifying 0 you get only RLE.
+You don\(aqt usually need or want to use this option.
+.TP
+.B \fB+f\fP
+Disables 2MHz mode for C128 and 2X mode in C16/+4.
+.TP
+.B \fB\-fbasic\fP
+[\fISFX\fP] Selects the decompressor for basic programs. This version
+performs the RUN function and enters the basic interpreter
+automatically. Currently only C64 and VIC20 are supported.
+.TP
+.B \fB\-ffast\fP
+[\fISFX\fP] Selects the faster, but longer decompressor version, if such
+version is available for the selected machine and selected
+options. Without this option the medium\-speed and medium\-size
+decompressor is used.
+.TP
+.B \fB\-fshort\fP
+[\fISFX\fP] Selects the shorter, but slower decompressor version, if such
+version is available for the selected machine and selected
+options. Without this option the medium\-speed and medium\-size
+decompressor is used.
+.TP
+.B \fB\-flist\fP
+List all available decompressors (the \fI\-f\fP options above), for all
+supported machines. The list may contain more decompressors than are
+shown above (the extras might be experimental, use at your own risk).
+.TP
+.B \fB\-fdelta\fP
+Allows delta matching. In this mode only the waveforms in the
+data matter, any offset is allowed and added in the
+decompression. Note that the decompressor becomes 22 bytes
+longer if delta matching is used and the short decompressor
+can\(aqt be used (24 bytes more). This means that delta matching
+must get more than 46 bytes of total gain to get any net
+savings. So, always compare the result size to a version
+compressed without \-fdelta.
+.sp
+Also, the compression time increases because delta matching is
+more complicated. The increase is not 256\-fold though, somewhere
+around 6\-7 times is more typical. So, use this option with care
+and do not be surprised if it doesn\(aqt help on your files.
+.TP
+.B \fB\-n\fP
+Disables RLE and LZ77 length optimization. You don\(aqt usually
+need or want to use this option.
+.TP
+.B \fB\-s\fP
+Display full statistics instead of a compression summary.
+.TP
+.B \fB\-p<bits>\fP
+Fixes the number of extra LZ77 position bits used for the low
+part. If pucrunch tells you to to use this option, see if the
+new setting gives better compression.
+.TP
+.B \fB\-m<bits>\fP
+Sets the maximum length value. The value should be 5, 6, or 7.
+The lengths are 64, 128 and 256, respectively. If pucrunch tells
+you to to use this option, see if the new setting gives better
+compression. The default value is 7.
+.TP
+.B \fB\-i<0|1>\fP
+Defines the interrupt enable state to be used after
+decompression. Value 0 disables interrupts, other values enable
+interrupts. The default is to enable interrupts after
+decompression.
+.TP
+.B \fB\-g<byte>\fP
+Defines the memory configuration to be used after decompression.
+Only used for C64 mode (\-c64). The default value is $37.
+.TP
+.B \fB\-u\fP
+Unpacks/decompresses a file instead of compressing it. The file
+to decompress must have a decompression header compatible with
+one of the decompression headers in the current version.
+.TP
+.B \fB\-h\fP
+Print built\-in help and exit.
+.UNINDENT
+.SH COPYRIGHT
+.sp
+As of 21.12.2005 Pucrunch is under GNU LGPL. See:
+.INDENT 0.0
+.INDENT 3.5
+\fI\%http://creativecommons.org/licenses/LGPL/2.1/\fP
+\fI\%http://www.gnu.org/copyleft/lesser.html\fP
+.UNINDENT
+.UNINDENT
+.SH AUTHORS
+.sp
+pucrunch was written by Pasi Ojala <\fI\%a1bert@iki.fi\fP>.
+.sp
+This man page consist of excerpts from the author\(aqs documentation. It
+was written for the SlackBuilds.org project by B. Watson, and is licensed
+under the same terms as the original docs.
+.SH SEE ALSO
+.sp
+exomizer(1)
+.sp
+The pucrunch homepage: \fI\%http://a1bert.kapsi.fi/Dev/pucrunch/\fP
+.sp
+The full documentation and sample decompressor code:
+.INDENT 0.0
+.INDENT 3.5
+/usr/doc/pucrunch\-20081122/
+.UNINDENT
+.UNINDENT
+.\" Generated by docutils manpage writer.
+.