network/greenbone-security-assistant: Updated for version 6.0.1.

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

3 files changed, 48 insertions, 25 deletions

diff --git a/network/greenbone-security-assistant/README b/network/greenbone-security-assistant/README
index 3681cc3a21..82c8f6f5bb 100644
--- a/network/greenbone-security-assistant/README
+++ b/network/greenbone-security-assistant/README
@@ -23,76 +23,99 @@ This is the UI the Open Vulnerability Assessment System (OpenVAS).
   not available as slackbuilds at this time.  Stay tuned.
 
 - If you're running in a VM environment, or on a headless server, then 
-  installing haveged is recommended, particularly for step 9 below.
+  installing haveged is recommended, particularly for step 11 below.
+
+###### Upgrade Notes ######
+
+If you're updating from OpenVAS-7 to OpenVAS-8, please note the following.
+(See: http://www.openvas.org/install-source.html if you're unsure which
+version you're running.)
+
+Openvas now uses redis as a temporary database while running scans.  You will
+need redis installed and running, as well as hiredis.  See step 2 below on
+how to configure redis.
+
+Before running openvas-manager, you'll need to migrate the database.  Simply
+run:
+# openvasmd --migrate
 
 ###### Installation Instructions ######
 
 These instructions assume you're familiar with slackbuilds.  If not, please
 refer to http://slackbuilds.org/howto/ .
 
-1. Build and install openvas-libraries.
+1. Build and install hiredis.
+
+2. Build and install redis.  You need to uncomment the following 2 lines in the
+   /etc/redis/redis.conf file:
+#unixsocket /tmp/redis.sock
+#unixsocketperm 700
+   Now start up redis:
+# sh /etc/rc.d/rc.redis start
+
+3. Build and install openvas-libraries.
 
-2. Build and install openvas-scanner.
+4. Build and install openvas-scanner.
 
-3. You need a Certificate Authority and server certificate. Run the following
+5. You need a Certificate Authority and server certificate. Run the following
    command:
 # openvas-mkcert
       
-4. You need the NVT's (Network Vulnerability Tests).  Run the following 
+6. You need the NVT's (Network Vulnerability Tests).  Run the following
    command to sync.  In the future, you can do this through the 
    greenbone-security-assistant interface.  This will take a minute or so
    with a blazing fast internet connection. YMMV.
 # openvas-nvt-sync
 
-5. Start the openvas-scanner daemon.
+7. Start the openvas-scanner daemon.
 # sh /etc/rc.d/rc.openvassd start
 
-6. Build and install openvas-manager.
+8. Build and install openvas-manager.
 
-7. You need client certificates for manager to talk to scanner.  Use the 
+9. You need client certificates for manager to talk to scanner.  Use the
    following command.
 # openvas-mkcert-client -n -i
 
-8. Initialize the manager database.  This will take a while, so be patient.
+10. Initialize the manager database.  This will take a while, so be patient.
 # openvasmd --rebuild
 
-9. You want encrypted credentials in the DB, so do this now.
+11. You want encrypted credentials in the DB, so do this now.
 # openvasmd --create-credentials-encryption-key
    This may take a while, so it's best to create some entropy by skipping to
-   #11-#13 and then coming back, if needed.
+   #13-#15 and then coming back, if needed.
 
-10. Create a user.
+12. Create a user.
 # openvasmd --create-user=cary
     If you find the assigned password hard to remember, you can change it 
     right now.
 # openvasmd --user=cary --new-password=mekmitasdigoat
 
-11. Sync SCAP data.  This will take some time.
+13. Sync SCAP data.  This will take some time.
 # openvas-scapdata-sync
 
-12. Sync CERT data.
+14. Sync CERT data.
 # openvas-certdata-sync
 
-13. Update port names.
+15. Update port names.
 # wget http://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xml
 # openvas-portnames-update service-names-port-numbers.xml
 # rm service-names-port-numbers.xml
 
-14. Start the openvas-manager daemon.
+16. Start the openvas-manager daemon.
 # sh /etc/rc.d/rc.openvasmd start
 
-15. Build and install libmicrohttpd.
+17. Build and install libmicrohttpd.
 
-16. Build and install greenbone-security-assistant.
+18. Build and install greenbone-security-assistant.
 
-17. Launch the greenbone-security-assistant.
+19. Launch the greenbone-security-assistant.
 # sh /etc/rc.d/rc.gsad start
 
-18. Point your browser at https://<YOUR IP OR HOSTNAME>:9392
+20. Point your browser at https://<YOUR IP OR HOSTNAME>:9392
     You'll get a certificate error, of course (fixing this is left as an 
     excercise for the reader). Log in with your username/password from #10.
 
-19. [Optional] Build and install openvas-cli.  You'll need this if you ever
+21. [Optional] Build and install openvas-cli.  You'll need this if you ever
     want to script tests.
 
 That's it!  If you run into any problems, you can try running the 
diff --git a/network/greenbone-security-assistant/greenbone-security-assistant.SlackBuild b/network/greenbone-security-assistant/greenbone-security-assistant.SlackBuild
index 31df1ccb31..67bf51f1f5 100644
--- a/network/greenbone-security-assistant/greenbone-security-assistant.SlackBuild
+++ b/network/greenbone-security-assistant/greenbone-security-assistant.SlackBuild
@@ -23,7 +23,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=greenbone-security-assistant
-VERSION=${VERSION:-5.0.6}
+VERSION=${VERSION:-6.0.1}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
diff --git a/network/greenbone-security-assistant/greenbone-security-assistant.info b/network/greenbone-security-assistant/greenbone-security-assistant.info
index 46c34940dc..f5a385496a 100644
--- a/network/greenbone-security-assistant/greenbone-security-assistant.info
+++ b/network/greenbone-security-assistant/greenbone-security-assistant.info
@@ -1,8 +1,8 @@
 PRGNAM="greenbone-security-assistant"
-VERSION="5.0.6"
+VERSION="6.0.1"
 HOMEPAGE="http://www.openvas.org"
-DOWNLOAD="http://wald.intevation.org/frs/download.php/1967/greenbone-security-assistant-5.0.6.tar.gz"
-MD5SUM="df21a4ebcd062baeb42c4f112a296fd0"
+DOWNLOAD="http://wald.intevation.org/frs/download.php/2018/greenbone-security-assistant-6.0.1.tar.gz"
+MD5SUM="907eb7afd1734463abc2530a35dd6f39"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES="openvas-libraries libmicrohttpd"