network/youtube-dl: Updated for version 2016.06.03.

Signed-off-by: Dimitris Zlatanidis <d.zlatanidis@gmail.com>

3 files changed, 447 insertions, 95 deletions

diff --git a/network/youtube-dl/youtube-dl.1 b/network/youtube-dl/youtube-dl.1
index 853a8dda3e..2b5c7d90a8 100644
--- a/network/youtube-dl/youtube-dl.1
+++ b/network/youtube-dl/youtube-dl.1
@@ -78,7 +78,7 @@ if this is not possible instead of searching.
 .TP
 .B \-\-ignore\-config
 Do not read configuration files.
-When given in the global configuration file /etc /youtube\-dl.conf: Do
+When given in the global configuration file /etc/youtube\-dl.conf: Do
 not read the user configuration in ~/.config/youtube\- dl/config
 (%APPDATA%/youtube\-dl/config.txt on Windows)
 .RS
@@ -89,6 +89,16 @@ Do not extract the videos of a playlist, only list them.
 .RS
 .RE
 .TP
+.B \-\-mark\-watched
+Mark videos watched (YouTube only)
+.RS
+.RE
+.TP
+.B \-\-no\-mark\-watched
+Do not mark videos watched (YouTube only)
+.RS
+.RE
+.TP
 .B \-\-no\-color
 Do not emit color codes in output
 .RS
@@ -96,7 +106,9 @@ Do not emit color codes in output
 .SS Network Options:
 .TP
 .B \-\-proxy \f[I]URL\f[]
-Use the specified HTTP/HTTPS proxy.
+Use the specified HTTP/HTTPS/SOCKS proxy.
+To enable experimental SOCKS proxy, specify a proper scheme.
+For example socks5://127.0.0.1:1080/.
 Pass in an empty string (\-\-proxy "") for direct connection
 .RS
 .RE
@@ -247,7 +259,7 @@ Download advertisements as well (experimental)
 .RE
 .SS Download Options:
 .TP
-.B \-r, \-\-rate\-limit \f[I]LIMIT\f[]
+.B \-r, \-\-limit\-rate \f[I]RATE\f[]
 Maximum download rate in bytes per second (e.g.
 50K or 4.2M)
 .RS
@@ -258,6 +270,12 @@ Number of retries (default is 10), or "infinite".
 .RS
 .RE
 .TP
+.B \-\-fragment\-retries \f[I]RETRIES\f[]
+Number of retries for a fragment (default is 10), or "infinite" (DASH
+only)
+.RS
+.RE
+.TP
 .B \-\-buffer\-size \f[I]SIZE\f[]
 Size of download buffer (e.g.
 1024 or 16K) (default is 1024)
@@ -282,13 +300,24 @@ Set file xattribute ytdl.filesize with expected filesize (experimental)
 .RE
 .TP
 .B \-\-hls\-prefer\-native
-Use the native HLS downloader instead of ffmpeg (experimental)
+Use the native HLS downloader instead of ffmpeg
+.RS
+.RE
+.TP
+.B \-\-hls\-prefer\-ffmpeg
+Use ffmpeg instead of the native HLS downloader
+.RS
+.RE
+.TP
+.B \-\-hls\-use\-mpegts
+Use the mpegts container for HLS videos, allowing to play the video
+while downloading (some players may not be able to play it)
 .RS
 .RE
 .TP
 .B \-\-external\-downloader \f[I]COMMAND\f[]
 Use the specified external downloader.
-Currently supports aria2c,axel,curl,httpie,wget
+Currently supports aria2c,avconv,axel,curl,ffmpeg,httpie,wget
 .RS
 .RE
 .TP
@@ -413,7 +442,7 @@ File to read cookies from and dump cookie jar in
 .B \-\-cache\-dir \f[I]DIR\f[]
 Location in the filesystem where youtube\-dl can store some downloaded
 information permanently.
-By default $XDG_CACHE_HOME /youtube\-dl or ~/.cache/youtube\-dl .
+By default $XDG_CACHE_HOME/youtube\-dl or ~/.cache/youtube\-dl .
 At the moment, only YouTube player files (for videos with obfuscated
 signatures) are cached, but that may change.
 .RS
@@ -636,7 +665,7 @@ Prefer free video formats unless a specific one is requested
 .RE
 .TP
 .B \-F, \-\-list\-formats
-List all available formats
+List all available formats of requested videos
 .RS
 .RE
 .TP
@@ -660,7 +689,7 @@ Write subtitle file
 .RE
 .TP
 .B \-\-write\-auto\-sub
-Write automatic subtitle file (YouTube only)
+Write automatically generated subtitle file (YouTube only)
 .RS
 .RE
 .TP
@@ -682,7 +711,7 @@ Subtitle format, accepts formats preference, for example: "srt" or
 .TP
 .B \-\-sub\-lang \f[I]LANGS\f[]
 Languages of the subtitles to download (optional) separated by commas,
-use IETF language tags like \[aq]en,pt\[aq]
+use \-\-list\- subs for available language tags
 .RS
 .RE
 .SS Authentication Options:
@@ -756,7 +785,7 @@ overwritten by default
 .RE
 .TP
 .B \-\-embed\-subs
-Embed subtitles in the video (only for mkv and mp4 videos)
+Embed subtitles in the video (only for mp4, webm and mkv videos)
 .RS
 .RE
 .TP
@@ -816,7 +845,7 @@ Example: \-\-exec \[aq]adb push {} /sdcard/Music/ && rm {}\[aq]
 .RS
 .RE
 .TP
-.B \-\-convert\-subtitles \f[I]FORMAT\f[]
+.B \-\-convert\-subs \f[I]FORMAT\f[]
 Convert the subtitles to other format (currently supported: srt|ass|vtt)
 .RS
 .RE
@@ -824,23 +853,32 @@ Convert the subtitles to other format (currently supported: srt|ass|vtt)
 .PP
 You can configure youtube\-dl by placing any supported command line
 option to a configuration file.
-On Linux, the system wide configuration file is located at
+On Linux and OS X, the system wide configuration file is located at
 \f[C]/etc/youtube\-dl.conf\f[] and the user wide configuration file at
 \f[C]~/.config/youtube\-dl/config\f[].
 On Windows, the user wide configuration file locations are
 \f[C]%APPDATA%\\youtube\-dl\\config.txt\f[] or
 \f[C]C:\\Users\\<user\ name>\\youtube\-dl.conf\f[].
+.PP
 For example, with the following configuration file youtube\-dl will
-always extract the audio, not copy the mtime and use a proxy:
+always extract the audio, not copy the mtime, use a proxy and save all
+videos under \f[C]Movies\f[] directory in your home directory:
 .IP
 .nf
 \f[C]
-\-\-extract\-audio
+\-x
 \-\-no\-mtime
 \-\-proxy\ 127.0.0.1:3128
+\-o\ ~/Movies/%(title)s.%(ext)s
 \f[]
 .fi
 .PP
+Note that options in configuration file are just the same options aka
+switches used in regular command line calls thus there \f[B]must be no
+whitespace\f[] after \f[C]\-\f[] or \f[C]\-\-\f[], e.g.
+\f[C]\-o\f[] or \f[C]\-\-proxy\f[] but not \f[C]\-\ o\f[] or
+\f[C]\-\-\ proxy\f[].
+.PP
 You can use \f[C]\-\-ignore\-config\f[] if you want to disable the
 configuration file for a particular youtube\-dl run.
 .SS Authentication with \f[C]\&.netrc\f[] file
@@ -853,7 +891,7 @@ execution and prevent tracking plain text passwords in the shell command
 history.
 You can achieve this using a \f[C]\&.netrc\f[]
 file (http://stackoverflow.com/tags/.netrc/info) on per extractor basis.
-For that you will need to create a\f[C]\&.netrc\f[] file in your
+For that you will need to create a \f[C]\&.netrc\f[] file in your
 \f[C]$HOME\f[] and restrict permissions to read/write by you only:
 .IP
 .nf
@@ -891,6 +929,9 @@ variable manually.
 .PP
 The \f[C]\-o\f[] option allows users to indicate a template for the
 output file names.
+.PP
+\f[B]tl;dr:\f[] navigate me to examples (#output-template-examples).
+.PP
 The basic usage is not to set any template arguments when downloading a
 single file, like in
 \f[C]youtube\-dl\ \-o\ funny_video.flv\ "http://some/video"\f[].
@@ -901,39 +942,147 @@ To clarify, that is a percent symbol followed by a name in parentheses,
 followed by a lowercase S.
 Allowed names are:
 .IP \[bu] 2
-\f[C]id\f[]: The sequence will be replaced by the video identifier.
+\f[C]id\f[]: Video identifier
+.IP \[bu] 2
+\f[C]title\f[]: Video title
+.IP \[bu] 2
+\f[C]url\f[]: Video URL
+.IP \[bu] 2
+\f[C]ext\f[]: Video filename extension
+.IP \[bu] 2
+\f[C]alt_title\f[]: A secondary title of the video
+.IP \[bu] 2
+\f[C]display_id\f[]: An alternative identifier for the video
+.IP \[bu] 2
+\f[C]uploader\f[]: Full name of the video uploader
+.IP \[bu] 2
+\f[C]license\f[]: License name the video is licensed under
+.IP \[bu] 2
+\f[C]creator\f[]: The creator of the video
+.IP \[bu] 2
+\f[C]release_date\f[]: The date (YYYYMMDD) when the video was released
+.IP \[bu] 2
+\f[C]timestamp\f[]: UNIX timestamp of the moment the video became
+available
+.IP \[bu] 2
+\f[C]upload_date\f[]: Video upload date (YYYYMMDD)
+.IP \[bu] 2
+\f[C]uploader_id\f[]: Nickname or id of the video uploader
+.IP \[bu] 2
+\f[C]location\f[]: Physical location where the video was filmed
+.IP \[bu] 2
+\f[C]duration\f[]: Length of the video in seconds
+.IP \[bu] 2
+\f[C]view_count\f[]: How many users have watched the video on the
+platform
+.IP \[bu] 2
+\f[C]like_count\f[]: Number of positive ratings of the video
+.IP \[bu] 2
+\f[C]dislike_count\f[]: Number of negative ratings of the video
+.IP \[bu] 2
+\f[C]repost_count\f[]: Number of reposts of the video
+.IP \[bu] 2
+\f[C]average_rating\f[]: Average rating give by users, the scale used
+depends on the webpage
+.IP \[bu] 2
+\f[C]comment_count\f[]: Number of comments on the video
+.IP \[bu] 2
+\f[C]age_limit\f[]: Age restriction for the video (years)
+.IP \[bu] 2
+\f[C]format\f[]: A human\-readable description of the format
+.IP \[bu] 2
+\f[C]format_id\f[]: Format code specified by \f[C]\-\-format\f[]
+.IP \[bu] 2
+\f[C]format_note\f[]: Additional info about the format
 .IP \[bu] 2
-\f[C]url\f[]: The sequence will be replaced by the video URL.
+\f[C]width\f[]: Width of the video
 .IP \[bu] 2
-\f[C]uploader\f[]: The sequence will be replaced by the nickname of the
-person who uploaded the video.
+\f[C]height\f[]: Height of the video
 .IP \[bu] 2
-\f[C]upload_date\f[]: The sequence will be replaced by the upload date
-in YYYYMMDD format.
+\f[C]resolution\f[]: Textual description of width and height
 .IP \[bu] 2
-\f[C]title\f[]: The sequence will be replaced by the video title.
+\f[C]tbr\f[]: Average bitrate of audio and video in KBit/s
 .IP \[bu] 2
-\f[C]ext\f[]: The sequence will be replaced by the appropriate extension
-(like flv or mp4).
+\f[C]abr\f[]: Average audio bitrate in KBit/s
 .IP \[bu] 2
-\f[C]epoch\f[]: The sequence will be replaced by the Unix epoch when
-creating the file.
+\f[C]acodec\f[]: Name of the audio codec in use
 .IP \[bu] 2
-\f[C]autonumber\f[]: The sequence will be replaced by a five\-digit
-number that will be increased with each download, starting at zero.
+\f[C]asr\f[]: Audio sampling rate in Hertz
 .IP \[bu] 2
-\f[C]playlist\f[]: The sequence will be replaced by the name or the id
-of the playlist that contains the video.
+\f[C]vbr\f[]: Average video bitrate in KBit/s
 .IP \[bu] 2
-\f[C]playlist_index\f[]: The sequence will be replaced by the index of
-the video in the playlist padded with leading zeros according to the
-total length of the playlist.
+\f[C]fps\f[]: Frame rate
 .IP \[bu] 2
-\f[C]format_id\f[]: The sequence will be replaced by the format code
-specified by \f[C]\-\-format\f[].
+\f[C]vcodec\f[]: Name of the video codec in use
 .IP \[bu] 2
-\f[C]duration\f[]: The sequence will be replaced by the length of the
-video in seconds.
+\f[C]container\f[]: Name of the container format
+.IP \[bu] 2
+\f[C]filesize\f[]: The number of bytes, if known in advance
+.IP \[bu] 2
+\f[C]filesize_approx\f[]: An estimate for the number of bytes
+.IP \[bu] 2
+\f[C]protocol\f[]: The protocol that will be used for the actual
+download
+.IP \[bu] 2
+\f[C]extractor\f[]: Name of the extractor
+.IP \[bu] 2
+\f[C]extractor_key\f[]: Key name of the extractor
+.IP \[bu] 2
+\f[C]epoch\f[]: Unix epoch when creating the file
+.IP \[bu] 2
+\f[C]autonumber\f[]: Five\-digit number that will be increased with each
+download, starting at zero
+.IP \[bu] 2
+\f[C]playlist\f[]: Name or id of the playlist that contains the video
+.IP \[bu] 2
+\f[C]playlist_index\f[]: Index of the video in the playlist padded with
+leading zeros according to the total length of the playlist
+.PP
+Available for the video that belongs to some logical chapter or section:
+\- \f[C]chapter\f[]: Name or title of the chapter the video belongs to
+\- \f[C]chapter_number\f[]: Number of the chapter the video belongs to
+\- \f[C]chapter_id\f[]: Id of the chapter the video belongs to
+.PP
+Available for the video that is an episode of some series or programme:
+\- \f[C]series\f[]: Title of the series or programme the video episode
+belongs to \- \f[C]season\f[]: Title of the season the video episode
+belongs to \- \f[C]season_number\f[]: Number of the season the video
+episode belongs to \- \f[C]season_id\f[]: Id of the season the video
+episode belongs to \- \f[C]episode\f[]: Title of the video episode \-
+\f[C]episode_number\f[]: Number of the video episode within a season \-
+\f[C]episode_id\f[]: Id of the video episode
+.PP
+Available for the media that is a track or a part of a music album: \-
+\f[C]track\f[]: Title of the track \- \f[C]track_number\f[]: Number of
+the track within an album or a disc \- \f[C]track_id\f[]: Id of the
+track \- \f[C]artist\f[]: Artist(s) of the track \- \f[C]genre\f[]:
+Genre(s) of the track \- \f[C]album\f[]: Title of the album the track
+belongs to \- \f[C]album_type\f[]: Type of the album \-
+\f[C]album_artist\f[]: List of all artists appeared on the album \-
+\f[C]disc_number\f[]: Number of the disc or other physical medium the
+track belongs to \- \f[C]release_year\f[]: Year (YYYY) when the album
+was released
+.PP
+Each aforementioned sequence when referenced in output template will be
+replaced by the actual value corresponding to the sequence name.
+Note that some of the sequences are not guaranteed to be present since
+they depend on the metadata obtained by particular extractor, such
+sequences will be replaced with \f[C]NA\f[].
+.PP
+For example for \f[C]\-o\ %(title)s\-%(id)s.%(ext)s\f[] and mp4 video
+with title \f[C]youtube\-dl\ test\ video\f[] and id
+\f[C]BaW_jenozKcj\f[] this will result in a
+\f[C]youtube\-dl\ test\ video\-BaW_jenozKcj.mp4\f[] file created in the
+current directory.
+.PP
+Output template can also contain arbitrary hierarchical path, e.g.
+\f[C]\-o\ \[aq]%(playlist)s/%(playlist_index)s\ \-\ %(title)s.%(ext)s\[aq]\f[]
+that will result in downloading each video in a directory corresponding
+to this path template.
+Any missing directory will be automatically created for you.
+.PP
+To specify percent literal in output template use \f[C]%%\f[].
+To output to stdout use \f[C]\-o\ \-\f[].
 .PP
 The current default template is \f[C]%(title)s\-%(id)s.%(ext)s\f[].
 .PP
@@ -942,54 +1091,151 @@ or &, such as when transferring the downloaded filename to a Windows
 system or the filename through an 8bit\-unsafe channel.
 In these cases, add the \f[C]\-\-restrict\-filenames\f[] flag to get a
 shorter title:
+.SS Output template examples
+.PP
+Note on Windows you may need to use double quotes instead of single.
 .IP
 .nf
 \f[C]
-$\ youtube\-dl\ \-\-get\-filename\ \-o\ "%(title)s.%(ext)s"\ BaW_jenozKc
+$\ youtube\-dl\ \-\-get\-filename\ \-o\ \[aq]%(title)s.%(ext)s\[aq]\ BaW_jenozKc
 youtube\-dl\ test\ video\ \[aq]\[aq]_ä↭𝕐.mp4\ \ \ \ #\ All\ kinds\ of\ weird\ characters
-$\ youtube\-dl\ \-\-get\-filename\ \-o\ "%(title)s.%(ext)s"\ BaW_jenozKc\ \-\-restrict\-filenames
+
+$\ youtube\-dl\ \-\-get\-filename\ \-o\ \[aq]%(title)s.%(ext)s\[aq]\ BaW_jenozKc\ \-\-restrict\-filenames
 youtube\-dl_test_video_.mp4\ \ \ \ \ \ \ \ \ \ #\ A\ simple\ file\ name
+
+#\ Download\ YouTube\ playlist\ videos\ in\ separate\ directory\ indexed\ by\ video\ order\ in\ a\ playlist
+$\ youtube\-dl\ \-o\ \[aq]%(playlist)s/%(playlist_index)s\ \-\ %(title)s.%(ext)s\[aq]\ https://www.youtube.com/playlist?list=PLwiyx1dc3P2JR9N8gQaQN_BCvlSlap7re
+
+#\ Download\ all\ playlists\ of\ YouTube\ channel/user\ keeping\ each\ playlist\ in\ separate\ directory:
+$\ youtube\-dl\ \-o\ \[aq]%(uploader)s/%(playlist)s/%(playlist_index)s\ \-\ %(title)s.%(ext)s\[aq]\ https://www.youtube.com/user/TheLinuxFoundation/playlists
+
+#\ Download\ Udemy\ course\ keeping\ each\ chapter\ in\ separate\ directory\ under\ MyVideos\ directory\ in\ your\ home
+$\ youtube\-dl\ \-u\ user\ \-p\ password\ \-o\ \[aq]~/MyVideos/%(playlist)s/%(chapter_number)s\ \-\ %(chapter)s/%(title)s.%(ext)s\[aq]\ https://www.udemy.com/java\-tutorial/
+
+#\ Download\ entire\ series\ season\ keeping\ each\ series\ and\ each\ season\ in\ separate\ directory\ under\ C:/MyVideos
+$\ youtube\-dl\ \-o\ "C:/MyVideos/%(series)s/%(season_number)s\ \-\ %(season)s/%(episode_number)s\ \-\ %(episode)s.%(ext)s"\ http://videomore.ru/kino_v_detalayah/5_sezon/367617
+
+#\ Stream\ the\ video\ being\ downloaded\ to\ stdout
+$\ youtube\-dl\ \-o\ \-\ BaW_jenozKc
 \f[]
 .fi
 .SH FORMAT SELECTION
 .PP
-By default youtube\-dl tries to download the best quality, but sometimes
-you may want to download in a different format.
-The simplest case is requesting a specific format, for example
-\f[C]\-f\ 22\f[].
-You can get the list of available formats using
-\f[C]\-\-list\-formats\f[], you can also use a file extension (currently
-it supports aac, m4a, mp3, mp4, ogg, wav, webm) or the special names
-\f[C]best\f[], \f[C]bestvideo\f[], \f[C]bestaudio\f[] and
-\f[C]worst\f[].
+By default youtube\-dl tries to download the best available quality,
+i.e.
+if you want the best quality you \f[B]don\[aq]t need\f[] to pass any
+special options, youtube\-dl will guess it for you by \f[B]default\f[].
+.PP
+But sometimes you may want to download in a different format, for
+example when you are on a slow or intermittent connection.
+The key mechanism for achieving this is so called \f[I]format
+selection\f[] based on which you can explicitly specify desired format,
+select formats based on some criterion or criteria, setup precedence and
+much more.
+.PP
+The general syntax for format selection is \f[C]\-\-format\ FORMAT\f[]
+or shorter \f[C]\-f\ FORMAT\f[] where \f[C]FORMAT\f[] is a \f[I]selector
+expression\f[], i.e.
+an expression that describes format or formats you would like to
+download.
+.PP
+\f[B]tl;dr:\f[] navigate me to examples (#format-selection-examples).
+.PP
+The simplest case is requesting a specific format, for example with
+\f[C]\-f\ 22\f[] you can download the format with format code equal to
+22.
+You can get the list of available format codes for particular video
+using \f[C]\-\-list\-formats\f[] or \f[C]\-F\f[].
+Note that these format codes are extractor specific.
+.PP
+You can also use a file extension (currently \f[C]3gp\f[], \f[C]aac\f[],
+\f[C]flv\f[], \f[C]m4a\f[], \f[C]mp3\f[], \f[C]mp4\f[], \f[C]ogg\f[],
+\f[C]wav\f[], \f[C]webm\f[] are supported) to download best quality
+format of particular file extension served as a single file, e.g.
+\f[C]\-f\ webm\f[] will download best quality format with \f[C]webm\f[]
+extension served as a single file.
+.PP
+You can also use special names to select particular edge case format: \-
+\f[C]best\f[]: Select best quality format represented by single file
+with video and audio \- \f[C]worst\f[]: Select worst quality format
+represented by single file with video and audio \- \f[C]bestvideo\f[]:
+Select best quality video only format (e.g.
+DASH video), may not be available \- \f[C]worstvideo\f[]: Select worst
+quality video only format, may not be available \- \f[C]bestaudio\f[]:
+Select best quality audio only format, may not be available \-
+\f[C]worstaudio\f[]: Select worst quality audio only format, may not be
+available
+.PP
+For example, to download worst quality video only format you can use
+\f[C]\-f\ worstvideo\f[].
 .PP
 If you want to download multiple videos and they don\[aq]t have the same
 formats available, you can specify the order of preference using
-slashes, as in \f[C]\-f\ 22/17/18\f[].
-You can also filter the video results by putting a condition in
+slashes.
+Note that slash is left\-associative, i.e.
+formats on the left hand side are preferred, for example
+\f[C]\-f\ 22/17/18\f[] will download format 22 if it\[aq]s available,
+otherwise it will download format 17 if it\[aq]s available, otherwise it
+will download format 18 if it\[aq]s available, otherwise it will
+complain that no suitable formats are available for download.
+.PP
+If you want to download several formats of the same video use comma as a
+separator, e.g.
+\f[C]\-f\ 22,17,18\f[] will download all these three formats, of course
+if they are available.
+Or more sophisticated example combined with precedence feature
+\f[C]\-f\ 136/137/mp4/bestvideo,140/m4a/bestaudio\f[].
+.PP
+You can also filter the video formats by putting a condition in
 brackets, as in \f[C]\-f\ "best[height=720]"\f[] (or
 \f[C]\-f\ "[filesize>10M]"\f[]).
-This works for filesize, height, width, tbr, abr, vbr, asr, and fps and
-the comparisons <, <=, >, >=, =, != and for ext, acodec, vcodec,
-container, and protocol and the comparisons =, != .
+.PP
+The following numeric meta fields can be used with comparisons
+\f[C]<\f[], \f[C]<=\f[], \f[C]>\f[], \f[C]>=\f[], \f[C]=\f[] (equals),
+\f[C]!=\f[] (not equals): \- \f[C]filesize\f[]: The number of bytes, if
+known in advance \- \f[C]width\f[]: Width of the video, if known \-
+\f[C]height\f[]: Height of the video, if known \- \f[C]tbr\f[]: Average
+bitrate of audio and video in KBit/s \- \f[C]abr\f[]: Average audio
+bitrate in KBit/s \- \f[C]vbr\f[]: Average video bitrate in KBit/s \-
+\f[C]asr\f[]: Audio sampling rate in Hertz \- \f[C]fps\f[]: Frame rate
+.PP
+Also filtering work for comparisons \f[C]=\f[] (equals), \f[C]!=\f[]
+(not equals), \f[C]^=\f[] (begins with), \f[C]$=\f[] (ends with),
+\f[C]*=\f[] (contains) and following string meta fields: \-
+\f[C]ext\f[]: File extension \- \f[C]acodec\f[]: Name of the audio codec
+in use \- \f[C]vcodec\f[]: Name of the video codec in use \-
+\f[C]container\f[]: Name of the container format \- \f[C]protocol\f[]:
+The protocol that will be used for the actual download, lower\-case.
+\f[C]http\f[], \f[C]https\f[], \f[C]rtsp\f[], \f[C]rtmp\f[],
+\f[C]rtmpe\f[], \f[C]m3u8\f[], or \f[C]m3u8_native\f[] \-
+\f[C]format_id\f[]: A short description of the format
+.PP
+Note that none of the aforementioned meta fields are guaranteed to be
+present since this solely depends on the metadata obtained by particular
+extractor, i.e.
+the metadata offered by video hoster.
+.PP
 Formats for which the value is not known are excluded unless you put a
-question mark (?) after the operator.
+question mark (\f[C]?\f[]) after the operator.
 You can combine format filters, so
 \f[C]\-f\ "[height\ <=?\ 720][tbr>500]"\f[] selects up to 720p videos
 (or videos where the height is not known) with a bitrate of at least 500
 KBit/s.
-Use commas to download multiple formats, such as
-\f[C]\-f\ 136/137/mp4/bestvideo,140/m4a/bestaudio\f[].
+.PP
 You can merge the video and audio of two formats into a single file
 using \f[C]\-f\ <video\-format>+<audio\-format>\f[] (requires ffmpeg or
-avconv), for example \f[C]\-f\ bestvideo+bestaudio\f[].
+avconv installed), for example \f[C]\-f\ bestvideo+bestaudio\f[] will
+download best video only format, best audio only format and mux them
+together with ffmpeg/avconv.
+.PP
 Format selectors can also be grouped using parentheses, for example if
 you want to download the best mp4 and webm formats with a height lower
 than 480 you can use \f[C]\-f\ \[aq](mp4,webm)[height<480]\[aq]\f[].
 .PP
 Since the end of April 2015 and version 2015.04.26 youtube\-dl uses
 \f[C]\-f\ bestvideo+bestaudio/best\f[] as default format selection (see
-#5447, #5456).
+#5447 (https://github.com/rg3/youtube-dl/issues/5447),
+#5456 (https://github.com/rg3/youtube-dl/issues/5456)).
 If ffmpeg or avconv are installed this results in downloading
 \f[C]bestvideo\f[] and \f[C]bestaudio\f[] separately and muxing them
 together into a single file giving the best overall quality available.
@@ -998,7 +1244,7 @@ best available quality served as a single file.
 \f[C]best\f[] is also needed for videos that don\[aq]t come from YouTube
 because they don\[aq]t provide the audio and video in two different
 files.
-If you want to only download some dash formats (for example if you are
+If you want to only download some DASH formats (for example if you are
 not interested in getting videos with a resolution higher than 1080p),
 you can add \f[C]\-f\ bestvideo[height<=?1080]+bestaudio/best\f[] to
 your configuration file.
@@ -1015,6 +1261,25 @@ you want to download the best available quality media served as a single
 file, you should explicitly specify your choice with \f[C]\-f\ best\f[].
 You may want to add it to the configuration file (#configuration) in
 order not to type it every time you run youtube\-dl.
+.SS Format selection examples
+.PP
+Note on Windows you may need to use double quotes instead of single.
+.IP
+.nf
+\f[C]
+#\ Download\ best\ mp4\ format\ available\ or\ any\ other\ best\ if\ no\ mp4\ available
+$\ youtube\-dl\ \-f\ \[aq]bestvideo[ext=mp4]+bestaudio[ext=m4a]/best[ext=mp4]/best\[aq]
+
+#\ Download\ best\ format\ available\ but\ not\ better\ that\ 480p
+$\ youtube\-dl\ \-f\ \[aq]bestvideo[height<=480]+bestaudio/best[height<=480]\[aq]
+
+#\ Download\ best\ video\ only\ format\ but\ no\ bigger\ that\ 50\ MB
+$\ youtube\-dl\ \-f\ \[aq]best[filesize<50M]\[aq]
+
+#\ Download\ best\ format\ available\ via\ direct\ link\ over\ HTTP/HTTPS\ protocol
+$\ youtube\-dl\ \-f\ \[aq](bestvideo+bestaudio/best)[protocol^=http]\[aq]
+\f[]
+.fi
 .SH VIDEO SELECTION
 .PP
 Videos can be filtered by their upload date using the options
@@ -1086,6 +1351,10 @@ hash\ \-r
 .PP
 Again, from then on you\[aq]ll be able to update with
 \f[C]sudo\ youtube\-dl\ \-U\f[].
+.SS youtube\-dl is extremely slow to start on Windows
+.PP
+Add a file exclusion for \f[C]youtube\-dl.exe\f[] in Windows Defender
+settings.
 .SS I\[aq]m getting an error
 \f[C]Unable\ to\ extract\ OpenGraph\ title\f[] on YouTube playlists
 .PP
@@ -1104,6 +1373,14 @@ guys (mailto:ubuntu-motu@lists.ubuntu.com?subject=outdated%20version%20of%20yout
 \- all they have to do is update the package to a somewhat recent
 version.
 See above for a way to update.
+.SS I\[aq]m getting an error when trying to use output template:
+\f[C]error:\ using\ output\ template\ conflicts\ with\ using\ title,\ video\ ID\ or\ auto\ number\f[]
+.PP
+Make sure you are not using \f[C]\-o\f[] with any of these options
+\f[C]\-t\f[], \f[C]\-\-title\f[], \f[C]\-\-id\f[], \f[C]\-A\f[] or
+\f[C]\-\-auto\-number\f[] set in command line or in a configuration
+file.
+Remove the latter if any.
 .SS Do I always have to pass \f[C]\-citw\f[]?
 .PP
 By default, youtube\-dl intends to have the best options (incidentally,
@@ -1132,10 +1409,25 @@ We\[aq]re considering to provide a way to let you solve the
 CAPTCHA (https://github.com/rg3/youtube-dl/issues/154), but at the
 moment, your best course of action is pointing a webbrowser to the
 youtube URL, solving the CAPTCHA, and restart youtube\-dl.
+.SS Do I need any other programs?
+.PP
+youtube\-dl works fine on its own on most sites.
+However, if you want to convert video/audio, you\[aq]ll need
+avconv (https://libav.org/) or ffmpeg (https://www.ffmpeg.org/).
+On some sites \- most notably YouTube \- videos can be retrieved in a
+higher quality format without sound.
+youtube\-dl will detect whether avconv/ffmpeg is present and
+automatically pick the best option.
+.PP
+Videos or video formats streamed via RTMP protocol can only be
+downloaded when rtmpdump (https://rtmpdump.mplayerhq.hu/) is installed.
+Downloading MMS and RTSP videos requires either
+mplayer (http://mplayerhq.hu/) or mpv (https://mpv.io/) to be installed.
 .SS I have downloaded a video but how can I play it?
 .PP
 Once the video is fully downloaded, use any video player, such as
-vlc (http://www.videolan.org) or mplayer (http://www.mplayerhq.hu/).
+mpv (https://mpv.io/), vlc (http://www.videolan.org) or
+mplayer (http://www.mplayerhq.hu/).
 .SS I extracted a video URL with \f[C]\-g\f[], but it does not play on
 another machine / in my webbrowser.
 .PP
@@ -1228,17 +1520,18 @@ means you\[aq]re using an outdated version of Python.
 Please update to Python 2.6 or 2.7.
 .SS What is this binary file? Where has the code gone?
 .PP
-Since June 2012 (#342) youtube\-dl is packed as an executable zipfile,
-simply unzip it (might need renaming to \f[C]youtube\-dl.zip\f[] first
-on some systems) or clone the git repository, as laid out above.
+Since June 2012 (#342 (https://github.com/rg3/youtube-dl/issues/342))
+youtube\-dl is packed as an executable zipfile, simply unzip it (might
+need renaming to \f[C]youtube\-dl.zip\f[] first on some systems) or
+clone the git repository, as laid out above.
 If you modify the code, you can run it by executing the
 \f[C]__main__.py\f[] file.
 To recompile the executable, run \f[C]make\ youtube\-dl\f[].
-.SS The exe throws a \f[I]Runtime error from Visual C++\f[]
+.SS The exe throws an error due to missing \f[C]MSVCR100.dll\f[]
 .PP
-To run the exe you need to install first the Microsoft Visual C++ 2008
-Redistributable
-Package (http://www.microsoft.com/en-us/download/details.aspx?id=29).
+To run the exe you need to install first the Microsoft Visual C++ 2010
+Redistributable Package
+(x86) (https://www.microsoft.com/en-US/download/details.aspx?id=5555).
 .SS On Windows, how should I set up ffmpeg and youtube\-dl? Where should
 I put the exe files?
 .PP
@@ -1263,7 +1556,7 @@ Use the \f[C]\-o\f[] to specify an output template (#output-template),
 for example \f[C]\-o\ "/home/user/videos/%(title)s\-%(id)s.%(ext)s"\f[].
 If you want this for all of your downloads, put the option into your
 configuration file (#configuration).
-.SS How do I download a video starting with a \f[C]\-\f[] ?
+.SS How do I download a video starting with a \f[C]\-\f[]?
 .PP
 Either prepend \f[C]http://www.youtube.com/watch?v=\f[] or separate the
 ID from the options with \f[C]\-\-\f[]:
@@ -1292,6 +1585,10 @@ is a good sign of invalid newline format.
 .PP
 Passing cookies to youtube\-dl is a good way to workaround login when a
 particular extractor does not implement it explicitly.
+Another use case is working around
+CAPTCHA (https://en.wikipedia.org/wiki/CAPTCHA) some websites require
+you to solve in particular cases in order to get access (e.g.
+YouTube, CloudFlare).
 .SS Can you add support for this anime video site, or site which shows
 current movies for free?
 .PP
@@ -1404,7 +1701,7 @@ If you want to create a build of youtube\-dl yourself, you\[aq]ll need
 .IP \[bu] 2
 python
 .IP \[bu] 2
-make
+make (both GNU make and BSD make are supported)
 .IP \[bu] 2
 pandoc
 .IP \[bu] 2
@@ -1413,8 +1710,15 @@ zip
 nosetests
 .SS Adding support for a new site
 .PP
-If you want to add support for a new site, you can follow this quick
-list (assuming your service is called \f[C]yourextractor\f[]):
+If you want to add support for a new site, first of all \f[B]make
+sure\f[] this site is \f[B]not dedicated to copyright
+infringement (#can-you-add-support-for-this-anime-video-site-or-site-which-shows-current-movies-for-free)\f[].
+youtube\-dl does \f[B]not support\f[] such sites thus pull requests
+adding support for them \f[B]will be rejected\f[].
+.PP
+After you have ensured this site is distributing it\[aq]s content
+legally, you can follow this quick list (assuming your service is called
+\f[C]yourextractor\f[]):
 .IP " 1." 4
 Fork this repository (https://github.com/rg3/youtube-dl/fork)
 .IP " 2." 4
@@ -1459,12 +1763,13 @@ class\ YourExtractorIE(InfoExtractor):
 \ \ \ \ \ \ \ \ webpage\ =\ self._download_webpage(url,\ video_id)
 
 \ \ \ \ \ \ \ \ #\ TODO\ more\ code\ goes\ here,\ for\ example\ ...
-\ \ \ \ \ \ \ \ title\ =\ self._html_search_regex(r\[aq]<h1>(.*?)</h1>\[aq],\ webpage,\ \[aq]title\[aq])
+\ \ \ \ \ \ \ \ title\ =\ self._html_search_regex(r\[aq]<h1>(.+?)</h1>\[aq],\ webpage,\ \[aq]title\[aq])
 
 \ \ \ \ \ \ \ \ return\ {
 \ \ \ \ \ \ \ \ \ \ \ \ \[aq]id\[aq]:\ video_id,
 \ \ \ \ \ \ \ \ \ \ \ \ \[aq]title\[aq]:\ title,
 \ \ \ \ \ \ \ \ \ \ \ \ \[aq]description\[aq]:\ self._og_search_description(webpage),
+\ \ \ \ \ \ \ \ \ \ \ \ \[aq]uploader\[aq]:\ self._search_regex(r\[aq]<div[^>]+id="uploader"[^>]*>([^<]+)<\[aq],\ webpage,\ \[aq]uploader\[aq],\ fatal=False),
 \ \ \ \ \ \ \ \ \ \ \ \ #\ TODO\ more\ properties\ (see\ youtube_dl/extractor/common.py)
 \ \ \ \ \ \ \ \ }
 \f[]
@@ -1472,7 +1777,7 @@ class\ YourExtractorIE(InfoExtractor):
 .RE
 .IP " 5." 4
 Add an import in
-\f[C]youtube_dl/extractor/__init__.py\f[] (https://github.com/rg3/youtube-dl/blob/master/youtube_dl/extractor/__init__.py).
+\f[C]youtube_dl/extractor/extractors.py\f[] (https://github.com/rg3/youtube-dl/blob/master/youtube_dl/extractor/extractors.py).
 .IP " 6." 4
 Run
 \f[C]python\ test/test_download.py\ TestDownload.test_YourExtractor\f[].
@@ -1488,12 +1793,33 @@ Have a look at
 \f[C]youtube_dl/extractor/common.py\f[] (https://github.com/rg3/youtube-dl/blob/master/youtube_dl/extractor/common.py)
 for possible helper methods and a detailed description of what your
 extractor should and may
-return (https://github.com/rg3/youtube-dl/blob/master/youtube_dl/extractor/common.py#L62-L200).
+return (https://github.com/rg3/youtube-dl/blob/58525c94d547be1c8167d16c298bdd75506db328/youtube_dl/extractor/common.py#L68-L226).
 Add tests and code for as many as you want.
 .IP " 8." 4
-If you can, check the code with
-flake8 (https://pypi.python.org/pypi/flake8).
+Keep in mind that the only mandatory fields in info dict for successful
+extraction process are \f[C]id\f[], \f[C]title\f[] and either
+\f[C]url\f[] or \f[C]formats\f[], i.e.
+these are the critical data the extraction does not make any sense
+without.
+This means that any
+field (https://github.com/rg3/youtube-dl/blob/58525c94d547be1c8167d16c298bdd75506db328/youtube_dl/extractor/common.py#L138-L226)
+apart from aforementioned mandatory ones should be treated \f[B]as
+optional\f[] and extraction should be \f[B]tolerate\f[] to situations
+when sources for these fields can potentially be unavailable (even if
+they always available at the moment) and \f[B]future\-proof\f[] in order
+not to break the extraction of general purpose mandatory fields.
+For example, if you have some intermediate dict \f[C]meta\f[] that is a
+source of metadata and it has a key \f[C]summary\f[] that you want to
+extract and put into resulting info dict as \f[C]description\f[], you
+should be ready that this key may be missing from the \f[C]meta\f[]
+dict, i.e.
+you should extract it as \f[C]meta.get(\[aq]summary\[aq])\f[] and not
+\f[C]meta[\[aq]summary\[aq]]\f[].
+Similarly, you should pass \f[C]fatal=False\f[] when extracting data
+from a webpage with \f[C]_search_regex/_html_search_regex\f[].
 .IP " 9." 4
+Check the code with flake8 (https://pypi.python.org/pypi/flake8).
+.IP "10." 4
 When the tests pass, add (http://git-scm.com/docs/git-add) the new files
 and commit (http://git-scm.com/docs/git-commit) them and
 push (http://git-scm.com/docs/git-push) the result, like this:
@@ -1501,14 +1827,14 @@ push (http://git-scm.com/docs/git-push) the result, like this:
 .IP
 .nf
 \f[C]
-$\ git\ add\ youtube_dl/extractor/__init__.py
+$\ git\ add\ youtube_dl/extractor/extractors.py
 $\ git\ add\ youtube_dl/extractor/yourextractor.py
 $\ git\ commit\ \-m\ \[aq][yourextractor]\ Add\ new\ extractor\[aq]
 $\ git\ push\ origin\ yourextractor
 \f[]
 .fi
 .RE
-.IP "10." 4
+.IP "11." 4
 Finally, create a pull
 request (https://help.github.com/articles/creating-a-pull-request).
 We\[aq]ll then review and merge it.
@@ -1537,7 +1863,7 @@ with\ youtube_dl.YoutubeDL(ydl_opts)\ as\ ydl:
 .PP
 Most likely, you\[aq]ll want to use various options.
 For a list of what can be done, have a look at
-youtube_dl/YoutubeDL.py (https://github.com/rg3/youtube-dl/blob/master/youtube_dl/YoutubeDL.py#L117-L265).
+\f[C]youtube_dl/YoutubeDL.py\f[] (https://github.com/rg3/youtube-dl/blob/master/youtube_dl/YoutubeDL.py#L121-L269).
 For a start, if you want to intercept youtube\-dl\[aq]s output, set a
 \f[C]logger\f[] object.
 .PP
@@ -1584,16 +1910,41 @@ with\ youtube_dl.YoutubeDL(ydl_opts)\ as\ ydl:
 .SH BUGS
 .PP
 Bugs and suggestions should be reported at:
-<https://github.com/rg3/youtube-dl/issues> .
+<https://github.com/rg3/youtube-dl/issues>.
 Unless you were prompted so or there is another pertinent reason (e.g.
 GitHub fails to accept the bug report), please do not send bug reports
 via personal email.
-For discussions, join us in the irc channel #youtube\-dl on freenode.
+For discussions, join us in the IRC channel
+#youtube\-dl (irc://chat.freenode.net/#youtube-dl) on freenode
+(webchat (http://webchat.freenode.net/?randomnick=1&channels=youtube-dl)).
 .PP
 \f[B]Please include the full output of youtube\-dl when run with
-\f[C]\-v\f[]\f[].
+\f[C]\-v\f[]\f[], i.e.
+\f[B]add\f[] \f[C]\-v\f[] flag to \f[B]your command line\f[], copy the
+\f[B]whole\f[] output and post it in the issue body wrapped in ``` for
+better formatting.
+It should look similar to this:
+.IP
+.nf
+\f[C]
+$\ youtube\-dl\ \-v\ <your\ command\ line>
+[debug]\ System\ config:\ []
+[debug]\ User\ config:\ []
+[debug]\ Command\-line\ args:\ [u\[aq]\-v\[aq],\ u\[aq]http://www.youtube.com/watch?v=BaW_jenozKcj\[aq]]
+[debug]\ Encodings:\ locale\ cp1251,\ fs\ mbcs,\ out\ cp866,\ pref\ cp1251
+[debug]\ youtube\-dl\ version\ 2015.12.06
+[debug]\ Git\ HEAD:\ 135392e
+[debug]\ Python\ version\ 2.6.6\ \-\ Windows\-2003Server\-5.2.3790\-SP2
+[debug]\ exe\ versions:\ ffmpeg\ N\-75573\-g1d0487f,\ ffprobe\ N\-75573\-g1d0487f,\ rtmpdump\ 2.4
+[debug]\ Proxy\ map:\ {}
+\&...
+\f[]
+.fi
+.PP
+\f[B]Do not post screenshots of verbose log only plain text is
+acceptable.\f[]
 .PP
-The output (including the first lines) contain important debugging
+The output (including the first lines) contains important debugging
 information.
 Issues without the full output are often not reproducible and therefore
 do not get solved in short order, if ever.
@@ -1623,7 +1974,7 @@ If your report is shorter than two lines, it is almost certainly missing
 some of these, which makes it hard for us to respond to it.
 We\[aq]re often too polite to close the issue outright, but the missing
 info makes misinterpretation likely.
-As a commiter myself, I often get frustrated by these issues, since the
+As a committer myself, I often get frustrated by these issues, since the
 only possible way for me to move forward on them is to ask for
 clarification over and over.
 .PP
@@ -1644,11 +1995,11 @@ command\-line) or upload the \f[C]\&.dump\f[] files you get when you add
 .PP
 \f[B]Site support requests must contain an example URL\f[].
 An example URL is a URL you might want to download, like
-http://www.youtube.com/watch?v=BaW_jenozKc .
+\f[C]http://www.youtube.com/watch?v=BaW_jenozKc\f[].
 There should be an obvious video present.
 Except under very special circumstances, the main page of a video
 service (e.g.
-http://www.youtube.com/ ) is \f[I]not\f[] an example URL.
+\f[C]http://www.youtube.com/\f[]) is \f[I]not\f[] an example URL.
 .SS Are you using the latest version?
 .PP
 Before reporting any issue, type \f[C]youtube\-dl\ \-U\f[].
@@ -1660,8 +2011,9 @@ This goes for feature requests as well.
 .PP
 Make sure that someone has not already opened the issue you\[aq]re
 trying to open.
-Search at the top of the window or at
-https://github.com/rg3/youtube\-dl/search?type=Issues .
+Search at the top of the window or browse the GitHub
+Issues (https://github.com/rg3/youtube-dl/search?type=Issues) of this
+repository.
 If there is an issue, feel free to write something along the lines of
 "This affects me as well, with version 2015.01.01.
 Here is some more information on the issue: ...".
@@ -1738,6 +2090,6 @@ bug.
 .PP
 youtube\-dl is released into the public domain by the copyright holders.
 .PP
-This README file was originally written by Daniel Bolton
-(<https://github.com/dbbolton>) and is likewise released into the public
-domain.
+This README file was originally written by Daniel
+Bolton (https://github.com/dbbolton) and is likewise released into the
+public domain.
diff --git a/network/youtube-dl/youtube-dl.SlackBuild b/network/youtube-dl/youtube-dl.SlackBuild
index 3cad72f903..bf95af2932 100644
--- a/network/youtube-dl/youtube-dl.SlackBuild
+++ b/network/youtube-dl/youtube-dl.SlackBuild
@@ -24,7 +24,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=youtube-dl
-VERSION=${VERSION:-2016.05.30.2}
+VERSION=${VERSION:-2016.06.03}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
diff --git a/network/youtube-dl/youtube-dl.info b/network/youtube-dl/youtube-dl.info
index 449b2274d0..8a17dab6f8 100644
--- a/network/youtube-dl/youtube-dl.info
+++ b/network/youtube-dl/youtube-dl.info
@@ -1,8 +1,8 @@
 PRGNAM="youtube-dl"
-VERSION="2016.05.30.2"
+VERSION="2016.06.03"
 HOMEPAGE="https://rg3.github.io/youtube-dl"
-DOWNLOAD="https://github.com/rg3/youtube-dl/archive/2016.05.30.2.tar.gz"
-MD5SUM="11ba6076c5cbb75ca6c08654b0524be9"
+DOWNLOAD="https://github.com/rg3/youtube-dl/archive/2016.06.03.tar.gz"
+MD5SUM="b7401413b0e97a73e4871951e2857d82"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES=""