network/geoipupdate: Added (GeoIP Updater).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

5 files changed, 145 insertions, 0 deletions

diff --git a/network/geoipupdate/README b/network/geoipupdate/README
new file mode 100644
index 0000000000..a1c0d6be1f
--- /dev/null
+++ b/network/geoipupdate/README
@@ -0,0 +1,3 @@
+MaxMind provides the GeoIP Update program, which performs automatic updates
+for both GeoIP2 and GeoIP Legacy binary databases. GeoIP updates require
+an active GeoIP subscription.
diff --git a/network/geoipupdate/doinst.sh b/network/geoipupdate/doinst.sh
new file mode 100644
index 0000000000..4d0f1379a3
--- /dev/null
+++ b/network/geoipupdate/doinst.sh
@@ -0,0 +1,14 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/GeoIP.conf.new
diff --git a/network/geoipupdate/geoipupdate.SlackBuild b/network/geoipupdate/geoipupdate.SlackBuild
new file mode 100644
index 0000000000..e95e7a4632
--- /dev/null
+++ b/network/geoipupdate/geoipupdate.SlackBuild
@@ -0,0 +1,100 @@
+#!/bin/sh
+
+# Slackware build script for geoipupdate
+
+# Copyright 2014 Oleg A. Deordiev Ukraine
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=geoipupdate
+VERSION=${VERSION:-2.1.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mv $PKG/etc/GeoIP.conf $PKG/etc/GeoIP.conf.new
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README > $PKG/usr/doc/$PRGNAM-$VERSION/README
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/geoipupdate/geoipupdate.info b/network/geoipupdate/geoipupdate.info
new file mode 100644
index 0000000000..152a7cf25a
--- /dev/null
+++ b/network/geoipupdate/geoipupdate.info
@@ -0,0 +1,10 @@
+PRGNAM="geoipupdate"
+VERSION="2.1.0"
+HOMEPAGE="http://dev.maxmind.com/geoip/geoipupdate/"
+DOWNLOAD="https://github.com/maxmind/geoipupdate/releases/download/v2.1.0/geoipupdate-2.1.0.tar.gz"
+MD5SUM="9107d082f15c8e482f4b6f1080e7deaf"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Oleg A. Deordiev"
+EMAIL="admin@ifconfig.com.ua"
diff --git a/network/geoipupdate/slack-desc b/network/geoipupdate/slack-desc
new file mode 100644
index 0000000000..6747e08270
--- /dev/null
+++ b/network/geoipupdate/slack-desc
@@ -0,0 +1,18 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+           |-----handy-ruler------------------------------------------------------|
+geoipupdate: geoipupdate (GeoIP Update Program)
+geoipupdate:
+geoipupdate: MaxMind provides the GeoIP Update program,
+geoipupdate: which performs automatic updates for both GeoIP2
+geoipupdate: and GeoIP Legacy binary databases.
+geoipupdate: GeoIP updates require an active GeoIP subscription.
+geoipupdate:
+geoipupdate:
+geoipupdate:
+geoipupdate: