games/z26v3: Added (an Atari 2600 emulator).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

7 files changed, 164 insertions, 0 deletions

diff --git a/games/z26v3/README b/games/z26v3/README
new file mode 100644
index 0000000000..5ec1bdbeb4
--- /dev/null
+++ b/games/z26v3/README
@@ -0,0 +1,24 @@
+z26v3 (an Atari 2600 emulator)
+
+Z26 is one of the best emulators for the Atari 2600. The author reports
+that the graphics part of the emulator is nearing perfection to a point
+that there's little more to fix.
+
+This is z26 version 3.x, which may have some issues running on Linux
+(depending on your hardware & config), and the authors aren't interested
+in fixing them. If you have problems you can't solve, try the older 2.13
+release, by installing games/z26 (which won't conflict with this build;
+you can have both installed).
+
+Specific Linux issues in this version:
+
+- The config file (z26.gui) is always read & written in the directory
+  where the ROM image is located. If the file doesn't exist and z26 can't
+  write to the directory, it refuses to start. This means no root-owned,
+  system-wide /usr/share/games/roms/2600 directory (even if users can
+  write there, they'll overwrite each others' config files).
+
+- The video timing relies on OpenGL VSync. If your card/driver combo is
+  incapable of this, the games will run insanely fast. Even with VSync
+  support, the games run at whatever your monitor refresh rate is set to
+  (for LCD panels this is usually 60Hz, which is correct for NTSC games).
diff --git a/games/z26v3/doinst.sh b/games/z26v3/doinst.sh
new file mode 100644
index 0000000000..9a8ded3c60
--- /dev/null
+++ b/games/z26v3/doinst.sh
@@ -0,0 +1,7 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -x /usr/bin/update-mime-database ]; then
+  /usr/bin/update-mime-database usr/share/mime >/dev/null 2>&1
+fi
diff --git a/games/z26v3/fixsegfault.diff.gz b/games/z26v3/fixsegfault.diff.gz
new file mode 100644
index 0000000000..a20fef4b4c
--- /dev/null
+++ b/games/z26v3/fixsegfault.diff.gz
diff --git a/games/z26v3/slack-desc b/games/z26v3/slack-desc
new file mode 100644
index 0000000000..7d795e12e7
--- /dev/null
+++ b/games/z26v3/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+     |-----handy-ruler------------------------------------------------------|
+z26v3: z26v3 (an Atari 2600 emulator)
+z26v3:
+z26v3: Z26 is one of the best emulators for the Atari 2600.
+z26v3: The author reports that the graphics part of the emulator is nearing
+z26v3: perfection to a point that there's little more to fix.
+z26v3:
+z26v3:
+z26v3:
+z26v3:
+z26v3:
+z26v3:
diff --git a/games/z26v3/z26v3.SlackBuild b/games/z26v3/z26v3.SlackBuild
new file mode 100644
index 0000000000..354d812ad8
--- /dev/null
+++ b/games/z26v3/z26v3.SlackBuild
@@ -0,0 +1,94 @@
+#!/bin/sh
+
+# Slackware build script for z26v3
+
+# Written by B. Watson (yalhcru@gmail.com)
+
+# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details.
+
+# Possibly TODO: write a man page. Upstream didn't bother to document
+# the command line options (even went so far as to remove the man page
+# and usage message that used to be in z26 2.x). The options have changed
+# since 2.x, so it would be a tedious process of reading the source code.
+# Not in the mood right now, maybe later.
+
+# Also possibly TODO: a patch to keep the config files (z26.gui and
+# z26.cli) in the user's home directory instead of whatever dir the
+# ROM file happens to live in. Leaving it as-is has its uses: different
+# sets of ROMs might require different options, so you could separate
+# them into dirs and each dir gets its own config file. Maybe the patch
+# should leave the config file locations alone, but allow the emulator
+# to start in the absence of a config file. Still thinking on this one.
+
+PRGNAM=z26v3
+VERSION=${VERSION:-3.02.01}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+mkdir -p $PRGNAM-$VERSION
+cd $PRGNAM-$VERSION
+unzip $CWD/z26v${VERSION}s.zip
+chown -R root:root .
+find -L .  -perm /111 -a \! -perm 755 -a -exec chmod 755 {} \+ -o \
+        \! -perm /111 -a \! -perm 644 -a -exec chmod 644 {} \+
+
+# Fix segfault on exit, when a ROM filename is passed on the command
+# line. Please don't gunzip the patch: it has CRLF line endings, git
+# will "helpfully" remove them, and the patch will fail.
+zcat $CWD/fixsegfault.diff.gz | patch -p1
+
+cd src
+make linux CFLAGS="$SLKCFLAGS"
+mkdir -p $PKG/usr/games
+install -s -m0755 -oroot -groot z26 $PKG/usr/games/$PRGNAM
+
+# .desktop file written by SlackBuild author.
+mkdir -p $PKG/usr/share/applications $PKG/usr/share/pixmaps
+cat $CWD/$PRGNAM.desktop > $PKG/usr/share/applications/$PRGNAM.desktop
+cat z26_icon.png > $PKG/usr/share/pixmaps/$PRGNAM.png
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+for i in doc/*; do
+  sed 's,\r,,' $i > $PKG/usr/doc/$PRGNAM-$VERSION/$( basename $i )
+done
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/games/z26v3/z26v3.desktop b/games/z26v3/z26v3.desktop
new file mode 100644
index 0000000000..29f229c784
--- /dev/null
+++ b/games/z26v3/z26v3.desktop
@@ -0,0 +1,10 @@
+[Desktop Entry]
+Name=Z26 v3.x
+Comment=Atari 2600 emulator
+Exec=z26v3 %f
+Icon=z26v3
+Terminal=false
+Type=Application
+StartupNotify=false
+Categories=Emulator;Game;
+MimeType=application/x-2600rom;
diff --git a/games/z26v3/z26v3.info b/games/z26v3/z26v3.info
new file mode 100644
index 0000000000..5757da7ccd
--- /dev/null
+++ b/games/z26v3/z26v3.info
@@ -0,0 +1,10 @@
+PRGNAM="z26v3"
+VERSION="3.02.01"
+HOMEPAGE="http://www.whimsey.com/z26/z26.html"
+DOWNLOAD="http://www.whimsey.com/z26/z26v3.02.01s.zip"
+MD5SUM="5c28a898a6a6145c222a8f0b5c8ce8d6"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="B. Watson"
+EMAIL="yalhcru@gmail.com"