development/gnustep-make: Added (GNUstep build/setup/packaging tool)

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

1 files changed, 110 insertions, 0 deletions

diff --git a/development/gnustep-make/gnustep-make.SlackBuild b/development/gnustep-make/gnustep-make.SlackBuild
new file mode 100644
index 0000000000..48ff3f0a01
--- /dev/null
+++ b/development/gnustep-make/gnustep-make.SlackBuild
@@ -0,0 +1,110 @@
+#!/bin/sh
+
+# Slackware build script for gnustep-make
+#
+# Copyright 2013 Christopher Walker Copperas Cove, TX
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=gnustep-make
+VERSION=${VERSION:-2.6.3}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+chmod -R a-s,u+rw,go+r-w .
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --with-layout=fhs-system \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --with-config-file=/etc/GNUstep/GNUstep.conf \
+  --with-library-combo=gnu-gnu-gnu \
+  --build=$ARCH-slackware-linux
+
+# I guess those configure flags are worthless
+sed -i GNUstep.conf \
+ -e "s,/usr/share/man,/usr/man,g" \
+ -e "s,/usr/local/share/man,/usr/local/man,g" \
+ -e "s,/usr/share/info,/usr/info,g" \
+ -e "s,/usr/local/share/info,/usr/local/info,g" \
+ -e "s,/usr/lib,/usr/lib${LIBDIRSUFFIX},g" \
+ -e "s,/usr/local/lib,/usr/local/lib${LIBDIRSUFFIX},g"
+
+make
+make install DESTDIR=$PKG
+
+mv $PKG/etc/GNUstep/GNUstep.conf $PKG/etc/GNUstep/GNUstep.conf.new
+
+# Move man pages to correct spot
+mv $PKG/usr/share/man $PKG/usr
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  ANNOUNCE COPYING ChangeLog FAQ GNUstep-HOWTO INSTALL NEWS README README.Packaging RELEASENOTES \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}