system/virtualbox-ose: Added to 12.1 repository

10 files changed, 383 insertions, 0 deletions

diff --git a/system/virtualbox-ose/LocalConfig.kmk b/system/virtualbox-ose/LocalConfig.kmk
new file mode 100644
index 0000000000..9c6c977485
--- /dev/null
+++ b/system/virtualbox-ose/LocalConfig.kmk
@@ -0,0 +1,19 @@
+# Modify building of VirtualBox to get a cleaner system
+
+DEFS += RTPATH_APP_PRIVATE=\"/usr/share/virtualbox\"
+
+# don't build testcases to save time, they are not needed for the package
+VBOX_WITH_TESTCASES     :=
+VBOX_WITH_TESTSUITE     :=
+
+# don't build guest-additions, they will come in a separate build
+VBOX_WITHOUT_ADDITIONS  := 1
+
+KBUILD_MSG_STYLE        := brief
+
+VBOX_WITH_ORIGIN           :=
+VBOX_PATH_APP_PRIVATE_ARCH := /usr/lib/virtualbox
+VBOX_PATH_SHARED_LIBS      := $(VBOX_PATH_APP_PRIVATE_ARCH)
+VBOX_WITH_RUNPATH          := $(VBOX_PATH_APP_PRIVATE_ARCH)
+VBOX_PATH_APP_PRIVATE      := /usr/share/virtualbox
+VBOX_PATH_APP_DOCS          = $(VBOX_PATH_PACKAGE_DOCS)
diff --git a/system/virtualbox-ose/README b/system/virtualbox-ose/README
new file mode 100644
index 0000000000..1952e95230
--- /dev/null
+++ b/system/virtualbox-ose/README
@@ -0,0 +1,48 @@
+VirtualBox Open Source Edition (OSE) is a general-purpose full
+virtualizer for x86 hardware.
+
+You'll probably want to add the following lines to your rc.local:
+
+	# Start vboxdrv
+	if [ -x /etc/rc.d/rc.vboxdrv ]; then
+	  /etc/rc.d/rc.vboxdrv start
+	fi
+
+	# Start vboxnet
+	if [ -x /etc/rc.d/rc.vboxnet ]; then
+	  /etc/rc.d/rc.vboxnet start
+	fi
+
+This will load the support kernel module and will setup the network
+configuration for VirtualBox. You should add similar "stop" lines to
+your rc.local_shutdown.
+
+By default you have to create a vboxusers group, for example with
+	groupadd -g 215 vboxusers
+and make your user a member of that group.
+Alternatively, you can run the script with VBOXUSERS=no to allow all
+users of your system to start virtual machines.
+
+By default VirtualBox will be compiled with hardening enabled. That
+means all binaries will be run suid root, which is the default
+behaviour of upstream packages. However, you are still able
+to disable this by passing HARDENING=no to the script.
+When hardening is enabled, VBOXUSERS is automatically set to yes.
+
+If the VirtualBox Additions ISO is available in the same directory
+as the build script, it will be included in the package and placed
+under /usr/share/virtualbox/. Same goes for the UserManual
+They can be downloaded from:
+	http://download.virtualbox.org/virtualbox/2.0.6/VBoxGuestAdditions_2.0.6.iso
+	http://download.virtualbox.org/virtualbox/2.0.6/UserManual.pdf
+
+Since 2.0.0 there is a Qt4 GUI, which at this point of time is still a little
+bit buggy and therefore disabled by default. To enable it pass QT4=yes
+to the script. The Qt3 GUI is enabled by default, though that might
+change with the next version as it is no longer maintained and likely
+to be removed sometime soon. To disable it, pass QT3=no to the script.
+
+If you want pulseaudio support, you have to pass PULSE=yes to the
+build script. Additionally VirtualBox requires acpica and dev86. The
+virtualbox-kernel package is required at runtime. All dependencies
+are available from SlackBuilds.org
diff --git a/system/virtualbox-ose/VBox.diff b/system/virtualbox-ose/VBox.diff
new file mode 100644
index 0000000000..8827eba949
--- /dev/null
+++ b/system/virtualbox-ose/VBox.diff
@@ -0,0 +1,12 @@
+--- VBox.sh-orig	2008-08-28 08:33:10.000000000 +0200
++++ VBox.sh	2008-09-04 20:41:23.653351415 +0200
+@@ -88,6 +88,9 @@
+   VirtualBox)
+     exec "$INSTALL_DIR/VirtualBox" "$@"
+     ;;
++  VirtualBox3)
++    exec "$INSTALL_DIR/VirtualBox3" "$@"
++    ;;
+   VBoxManage)
+     exec "$INSTALL_DIR/VBoxManage" "$@"
+     ;;
diff --git a/system/virtualbox-ose/VirtualBox3.desktop b/system/virtualbox-ose/VirtualBox3.desktop
new file mode 100644
index 0000000000..49c045fd39
--- /dev/null
+++ b/system/virtualbox-ose/VirtualBox3.desktop
@@ -0,0 +1,15 @@
+[Desktop Entry]
+Encoding=UTF-8
+Version=1.0
+Name=Sun xVM VirtualBox (Qt3)
+GenericName=Virtual Machine (Qt3)
+Type=Application
+Exec=VirtualBox3
+TryExec=VirtualBox3
+DocPath=file://$VBOX_DOC_PATH/UserManual.pdf
+Icon=VBox
+Categories=Emulator;System;X-MandrivaLinux-System;
+Comment=Run several virtual systems on a single host computer
+Comment[de]=Windows und andere Betriebssysteme unter Linux ausführen
+Comment[sv]=Kör flera virtuella system på en enda värddator
+Comment[ko]=가상 머신
diff --git a/system/virtualbox-ose/doinst.sh b/system/virtualbox-ose/doinst.sh
new file mode 100644
index 0000000000..478e3d3460
--- /dev/null
+++ b/system/virtualbox-ose/doinst.sh
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database usr/share/applications >/dev/null 2>&1
+fi
+
+# Prepare the new configuration files
+config etc/vbox/vbox.cfg.new
+for file in etc/rc.d/rc.vboxdrv.new etc/rc.d/rc.vboxnet.new ; do
+  if [ -e $(dirname $file)/$(basename $file .new) -a -x $(dirname $file)/$(basename $file .new) ]; then
+    chmod 0755 $file
+  else
+    chmod 0644 $file
+  fi
+  config $file
+done
+
diff --git a/system/virtualbox-ose/slack-desc b/system/virtualbox-ose/slack-desc
new file mode 100644
index 0000000000..e664ddbc2e
--- /dev/null
+++ b/system/virtualbox-ose/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler----------------------------------------------|
+virtualbox-ose: virtualbox-ose (x86 Virtualizer)
+virtualbox-ose:
+virtualbox-ose: VirtualBox Open Source Edition (OSE) is a general-purpose
+virtualbox-ose: full virtualizer for x86 hardware.
+virtualbox-ose:
+virtualbox-ose: Homepage: http://www.virtualbox.org
+virtualbox-ose:
+virtualbox-ose:
+virtualbox-ose:
+virtualbox-ose:
+virtualbox-ose:
diff --git a/system/virtualbox-ose/vbox.cfg b/system/virtualbox-ose/vbox.cfg
new file mode 100644
index 0000000000..351a4f1fdf
--- /dev/null
+++ b/system/virtualbox-ose/vbox.cfg
@@ -0,0 +1,5 @@
+# VirtualBox installation directory
+INSTALL_DIR="/usr/lib/virtualbox"
+
+# vboxdrv source location
+MODULE_SRC="/usr/src"
\ No newline at end of file
diff --git a/system/virtualbox-ose/vboxdrv.sh.in.diff b/system/virtualbox-ose/vboxdrv.sh.in.diff
new file mode 100644
index 0000000000..1869dc2fda
--- /dev/null
+++ b/system/virtualbox-ose/vboxdrv.sh.in.diff
@@ -0,0 +1,17 @@
+--- vboxdrv.sh.in.orig	2008-05-29 23:13:20.318184008 -0500
++++ vboxdrv.sh.in	2008-05-29 23:14:03.623677969 -0500
+@@ -175,10 +175,10 @@
+         fi
+     fi
+     # ensure permissions
+-    if ! chown :$GROUPNAME $DEVICE 2>/dev/null; then
+-        rmmod $MODNAME 2>/dev/null
+-        failure "Cannot change owner $GROUPNAME for device $DEVICE"
+-    fi
++    #if ! chown :$GROUPNAME $DEVICE 2>/dev/null; then
++    #    rmmod $MODNAME 2>/dev/null
++    #    failure "Cannot change owner $GROUPNAME for device $DEVICE"
++    #fi
+     succ_msg
+ }
+ 
diff --git a/system/virtualbox-ose/virtualbox-ose.SlackBuild b/system/virtualbox-ose/virtualbox-ose.SlackBuild
new file mode 100644
index 0000000000..90b1faef35
--- /dev/null
+++ b/system/virtualbox-ose/virtualbox-ose.SlackBuild
@@ -0,0 +1,210 @@
+#!/bin/sh
+
+# Slackware build script for virtualbox-ose
+
+# Copyright 2008 Heinz Wiesinger <pprkut@liwjatan.at>
+# Copyright 2008 Mauro Giachero <mauro.giachero@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=virtualbox-ose
+SRCNAM=VirtualBox
+VERSION=2.0.6
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+# kmk doesn't support MAKEFLAGS, so we use JOBS here
+JOBS=${JOBS:-3}
+
+# Define Variable Names
+GUI=""
+qtgui=""
+
+# Support for the pulseaudio-backend
+if [ "${PULSE:-no}" = "no" ]; then
+    do_pulse="--disable-pulse"
+else
+    do_pulse=""
+fi
+
+# Using the vboxusers-group
+VBOXUSERS=${VBOXUSERS:-yes}
+
+if [ "$VBOXUSERS" = "yes" ]; then
+  # Check for vboxusers group here
+  if ! grep ^vboxusers: /etc/group 2>&1 > /dev/null; then
+    echo "  Must have a vboxusers group to run this script."
+    echo "    # groupadd -g 215 vboxusers"
+    echo "  Or something similar."
+    exit 1
+  fi
+fi
+
+# Enable Hardeing - Defaulting to yes as requested by upstream
+if [ "${HARDENING:-yes}" = "yes" ]; then
+  harden="--enable-hardening"
+  VBOXUSERS="yes"
+else
+  harden="--disable-hardening"
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-${VERSION}-OSE.tar.bz2
+cd $SRCNAM-$VERSION
+patch -d src/VBox/Installer/linux -i $CWD/VBox.diff
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+# The Innotek init script tries to set the device nodes' permissions.
+# This is problematic with VBOXUSERS=no, but you probably still want
+# this for security reasons when using the vboxusers-group
+if [ "$VBOXUSERS" = "yes" ]; then
+  GROUP="vboxusers"
+  MODE="750"
+  mkdir -p $PKG/etc/udev/rules.d
+  echo 'KERNEL=="vboxdrv", NAME="vboxdrv", OWNER="root", GROUP="vboxusers", MODE="0660"' \
+    > $PKG/etc/udev/rules.d/60-vboxdrv.rules
+else
+  patch -d src/VBox/Installer/linux -i $CWD/vboxdrv.sh.in.diff
+  GROUP="root"
+  MODE="755"
+  mkdir -p $PKG/etc/udev/rules.d
+  echo 'KERNEL=="vboxdrv", NAME="vboxdrv", MODE="0666"' \
+    > $PKG/etc/udev/rules.d/60-vboxdrv.rules
+fi
+
+# Support for the qt3-frontend
+if [ "${QT3:-yes}" = "yes" ]; then
+  qtgui+=" --with-qt-dir=/usr/lib/qt"
+  GUI+=" VirtualBox3"
+  mkdir -p $PKG/usr/share/applications
+  cp -f $CWD/VirtualBox3.desktop $PKG/usr/share/applications/
+  sed -i "s|\$VBOX_DOC_PATH|/usr/share/virtualbox|" \
+    $PKG/usr/share/applications/VirtualBox3.desktop
+else
+  qtgui+=" --disable-qt3"
+fi
+
+# Support for the qt4-frontend
+if [ "${QT4:-no}" = "no" ]; then
+  qtgui+=" --disable-qt4"
+else
+  GUI+=" VirtualBox"
+  mkdir -p $PKG/usr/share/applications
+  cp -f src/VBox/Installer/linux/VirtualBox.desktop $PKG/usr/share/applications/
+  sed -i "s|\$VBOX_DOC_PATH|/usr/share/virtualbox|" \
+    $PKG/usr/share/applications/VirtualBox.desktop
+fi
+
+cd src/VBox/Frontends/VirtualBox
+  sed -i "s/VirtualBox3_QT_TRANSLATIONS/VirtualBox_QT_TRANSLATIONS/" \
+    Makefile.kmk
+cd -
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --ose \
+  $harden \
+  $qtgui \
+  $do_pulse
+
+. env.sh
+
+kmk -j ${JOBS} LOCALCFG=$CWD/LocalConfig.kmk
+
+mkdir -p $PKG/usr/{lib,share}/virtualbox \
+  $PKG/usr/{bin,src} \
+  $PKG/usr/share/pixmaps \
+  $PKG/etc/{rc.d,vbox}
+
+cp -f src/VBox/Installer/linux/vboxnet.sh.in $PKG/etc/rc.d/rc.vboxnet.new
+cp -f src/VBox/Installer/linux/vboxdrv.sh.in $PKG/etc/rc.d/rc.vboxdrv.new
+cp -f $CWD/vbox.cfg $PKG/etc/vbox/vbox.cfg.new
+install -m $MODE -g $GROUP src/VBox/Installer/linux/VBoxAddIF.sh $PKG/usr/lib/virtualbox/VBoxTap
+
+cd out/linux.x86/release/bin/
+  rm -f vboxdrv.ko
+  mv VBox.png $PKG/usr/share/pixmaps/
+  mv src $PKG/usr/src/vboxdrv-$VERSION
+  mv sdk nls* *.tar.gz $PKG/usr/share/virtualbox/
+  install -m $MODE -g $GROUP VBoxSysInfo.sh $PKG/usr/share/virtualbox/
+  install -m $MODE -g $GROUP VBoxTunctl $PKG/usr/bin/
+  rm -f VoxSysInfo.sh VBoxTunctl
+  mv * $PKG/usr/lib/virtualbox/
+  chown -R root:$GROUP $PKG/usr/lib/virtualbox/
+  chmod -R $MODE $PKG/usr/lib/virtualbox/
+  mv $PKG/usr/lib/virtualbox/VBox.sh $PKG/usr/lib/virtualbox/VBox
+cd -
+
+for i in $GUI VBoxManage VBoxSDL VBoxHeadless VBoxVRDP; do
+  ln -s /usr/lib/virtualbox/VBox $PKG/usr/bin/$i ;
+done
+
+for i in VBoxAddIF VBoxDeleteIF; do
+  ln -s /usr/lib/virtualbox/VBoxTap $PKG/usr/bin/$i
+done
+
+ln -s /usr/lib/virtualbox/vditool $PKG/usr/bin/vditool
+
+if [ "$harden" = "--enable-hardening" ]; then
+  for i in $GUI VBoxSDL VBoxHeadless; do
+    chmod 4${MODE} $PKG/usr/lib/virtualbox/$i
+  done
+fi
+
+if [ -e "$CWD/VBoxGuestAdditions_$VERSION.iso" ]; then
+  cp -f $CWD/VBoxGuestAdditions_$VERSION.iso \
+    $PKG/usr/share/virtualbox/VBoxGuestAdditions.iso
+fi
+
+if [ -e "$CWD/UserManual.pdf" ]; then
+  cp -f $CWD/UserManual.pdf \
+    $PKG/usr/share/virtualbox/UserManual.pdf
+fi
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -f COPYING COPYING.CDDL $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/virtualbox-ose/virtualbox-ose.info b/system/virtualbox-ose/virtualbox-ose.info
new file mode 100644
index 0000000000..b2cfe916b6
--- /dev/null
+++ b/system/virtualbox-ose/virtualbox-ose.info
@@ -0,0 +1,8 @@
+PRGNAM="virtualbox-ose"
+VERSION="2.0.6"
+HOMEPAGE="http://www.virtualbox.org"
+DOWNLOAD="http://download.virtualbox.org/virtualbox/2.0.6/VirtualBox-2.0.6-OSE.tar.bz2"
+MD5SUM="455253532b5128bb5c2ff4c76b9751a7"
+MAINTAINER="ppr:kut"
+EMAIL="pprkut@liwjatan.at"
+APPROVED="dsomero"