perl/perl-Inline-C: Added (C language support for Inline).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

4 files changed, 141 insertions, 0 deletions

diff --git a/perl/perl-Inline-C/README b/perl/perl-Inline-C/README
new file mode 100644
index 0000000000..edfb28b3bc
--- /dev/null
+++ b/perl/perl-Inline-C/README
@@ -0,0 +1,13 @@
+Inline::C is a module that allows you to write Perl subroutines in C. Since 
+version 0.30 the Inline module supports multiple programming languages and 
+each language has its own support module. This document describes how to use 
+Inline with the C programming language. It also goes a bit into Perl C 
+internals.
+
+If you want to start working with programming examples right away, check out 
+Inline::C::Cookbook. For more information on Inline in general, see Inline.
+
+USAGE
+
+You never actually use Inline::C directly. It is just a support module for 
+using Inline.pm with C.
diff --git a/perl/perl-Inline-C/perl-Inline-C.SlackBuild b/perl/perl-Inline-C/perl-Inline-C.SlackBuild
new file mode 100644
index 0000000000..7fb6bc2118
--- /dev/null
+++ b/perl/perl-Inline-C/perl-Inline-C.SlackBuild
@@ -0,0 +1,99 @@
+#!/bin/sh
+
+# Slackware build script for perl-Inline-C
+
+# Copyright 2015 Glenn Becker Arlington, MA USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PRGNAM=perl-Inline-C
+VERSION=${VERSION:-0.76}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+SRCNAM="$(printf $PRGNAM | cut -d- -f2-)"
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+perl Makefile.PL \
+  PREFIX=/usr \
+  INSTALLDIRS=vendor \
+  INSTALLVENDORMAN1DIR=/usr/man/man1 \
+  INSTALLVENDORMAN3DIR=/usr/man/man3
+make
+make test
+make install DESTDIR=$PKG
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f || true
+
+find $PKG -depth -type d -empty -delete || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a Changes CONTRIBUTING MANIFEST README $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/perl/perl-Inline-C/perl-Inline-C.info b/perl/perl-Inline-C/perl-Inline-C.info
new file mode 100644
index 0000000000..73edf97e82
--- /dev/null
+++ b/perl/perl-Inline-C/perl-Inline-C.info
@@ -0,0 +1,10 @@
+PRGNAM="perl-Inline-C"
+VERSION="0.76"
+HOMEPAGE="https://metacpan.org/pod/distribution/Inline-C/lib/Inline/C.pod"
+DOWNLOAD="https://cpan.metacpan.org/authors/id/I/IN/INGY/Inline-C-0.76.tar.gz"
+MD5SUM="c0fbfdd058075c9271a1384c822c9a87"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="perl-Inline perl-IO-All perl-Pegex perl-File-Copy-Recursive perl-extutils-makemaker"
+MAINTAINER="Glenn Becker"
+EMAIL="glenn.becker@gmail.com"
diff --git a/perl/perl-Inline-C/slack-desc b/perl/perl-Inline-C/slack-desc
new file mode 100644
index 0000000000..c5bbf06258
--- /dev/null
+++ b/perl/perl-Inline-C/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+             |-----handy-ruler------------------------------------------------------|
+perl-Inline-C: perl-Inline-C (C language support for Inline)
+perl-Inline-C:
+perl-Inline-C: Inline::C is a module that allows you to write Perl subroutines in C.
+perl-Inline-C: Since version 0.30 the Inline module supports multiple programming
+perl-Inline-C: languages and each language has its own support module.
+perl-Inline-C:
+perl-Inline-C:
+perl-Inline-C:
+perl-Inline-C:
+perl-Inline-C:
+perl-Inline-C: